qca9882网卡的错误打印信息，请高手帮我分析一下，谢谢！

ruix***

板子是qca9531+qca9882的无线，结果内核打印出错，很多的error，不知怎么回事，还望高手指点一下。
多谢！

[   10.275248] kmodloader: loading kernel modules from /etc/modules.d/*
[   10.301113] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   10.332497] Loading modules backported from Linux version wt-2017-10-06-0-ga7a22fbbd1f0
[   10.340862] Backport generated by backports.git v4.14-rc2-1-6-gedfb595c
[   10.550314] ath10k 4.13 driver, optimized for CT firmware, probing pci device: 0x3c.
[   10.597210] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[   10.605298] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[   10.881395] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/fwcfg-pci-0000:00:00.0.txt failed with error -2
[   10.892332] ath10k_pci 0000:00:00.0: Falling back to user helper
[   10.973217] firmware ath10k!fwcfg-pci-0000:00:00.0.txt: firmware_loading_store: map pages failed
[   10.982733] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
[   10.993833] ath10k_pci 0000:00:00.0: Falling back to user helper
[   11.148457] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
[   11.158144] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/cal-pci-0000:00:00.0.bin failed with error -2
[   11.168885] ath10k_pci 0000:00:00.0: Falling back to user helper
[   11.322690] firmware ath10k!cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
[   11.332148] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
[   11.343269] ath10k_pci 0000:00:00.0: Falling back to user helper
[   11.498012] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[   11.507753] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-5.bin failed with error -2
[   11.518856] ath10k_pci 0000:00:00.0: Falling back to user helper
[   11.672855] firmware ath10k!QCA988X!hw2.0!firmware-5.bin: firmware_loading_store: map pages failed
[   11.682544] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-4.bin failed with error -2
[   11.693645] ath10k_pci 0000:00:00.0: Falling back to user helper
[   11.847458] firmware ath10k!QCA988X!hw2.0!firmware-4.bin: firmware_loading_store: map pages failed
[   11.857146] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-3.bin failed with error -2
[   11.868248] ath10k_pci 0000:00:00.0: Falling back to user helper
[   12.022459] firmware ath10k!QCA988X!hw2.0!firmware-3.bin: firmware_loading_store: map pages failed
[   12.231377] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[   12.241005] ath10k_pci 0000:00:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 0
[   12.254638] ath10k_pci 0000:00:00.0: firmware ver 10.1-ct-8x-__fW-019-395e9f1 api 2 features wmi-10.x,has-wmi-mgmt-tx,txstatus-noack,wmi-10.x-CT,ratemask-CT,get-temp-CT crc32 a63684ee
[   12.299280] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[   12.310102] ath10k_pci 0000:00:00.0: Falling back to user helper
[   12.390952] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
[   12.424172] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[   13.382833] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256
[   13.400489] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
[   13.407111] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0'
[   13.414490] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 26504 iram: 25520'
[   13.468912] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1

zcy***

不明所以 坐等大神出来解答

feng***

看起来是驱动不对

ruix***

fengchen 发表于 2017-10-24 20:27
看起来是驱动不对

驱动用的是lede提供的ath10k，应该不会有问题的。

ruix***

zcyy55 发表于 2017-10-24 18:35
不明所以 坐等大神出来解答

多谢多谢，希望有大神解决

wuba***

怎么解决的呢？告诉我一下吧