用ttl刷从恩山下载的ND版ddwrt报错，求高手提示

lklkl***

通过tftp刷入dd-wrt.v24-11650_NEWD_mega.bin后，dos中提示传输成功，有文件大小和传输速度，在ttl的控制台里看到在传输文件，完成后到了programing就不动了，什么显示都没有，ping不通路由，发现是死机了，只能重启。现在想刷其他版本的，问题一样，高手知道下面该如何操作。路由是WRH 54G
恩山裸板 8M FLASH  32M MEMORY

lklkl***

WRH54G  8M FLASH  32M MEMORY  刷dd-wrt.v24_mega_generic.bin可以么？

lklkl***

TTL里显示如下的信息：

CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Mon Mar 12 15:25:22 CST 2007 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena
Initializing Devices.
Boot partition size = 131072(0x20000)
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.130.23.0
CPU type 0x29029: 240MHz
Total memory: 32768 KBytes

Total memory used by CFE:  0x80400000 - 0x8049A8A0 (632992)
Initialized Data:          0x80430830 - 0x80432E20 (9712)
BSS Area:                  0x80432E20 - 0x804348A0 (6784)
Local Heap:                0x804348A0 - 0x804988A0 (409600)
Stack Area:                0x804988A0 - 0x8049A8A0 (8192)
Text (code) segment:       0x80400000 - 0x80430830 (198704)
Boot area (physical):      0x0049B000 - 0x004DB000
Relocation Factor:         I:00000000 - D:00000000

Device eth0:  hwaddr 00-3F-C6-69-EF-67, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Null Rescue Flag.
Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
Loading: TFTP Server.
Failed.
Could not load :: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3856 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029029
Linux version 2.4.37 (bin@dd-wrt) (gcc version 3.4.6 (OpenWrt-2.0)) #3225 Wed Feb 18 19:06:07 CET 2009
Setting the PFC to its default value
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
CPU: BCM5354 rev 3 at 240 MHz
Using 120.000 MHz high precision timer.
Calibrating delay loop... 239.20 BogoMIPS
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
PCI: no core
PCI: Fixing up bus 0
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
PCI: Setting latency timer of device 00:01.0 to 64
PCI: Setting latency timer of device 00:05.0 to 64
sb_doattach: incoming bus is PCI but it's a lie, switching to SB devid:0x4318
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Flash device: 0x800000 at 0x1c000000
bootloader size: 131072
Physically mapped flash: Filesystem type: squashfs, size=0x4f2085
partition size = 5245952
Updating TRX offsets and length:
old trx = [0x0000001c, 0x000009a4, 0x000df400], len=0x005d3000 crc32=0x1630348e
new trx = [0x0000001c, 0x000009a4, 0x000df400], len=0x005e0000 crc32=0x09814330
Warning: DQ5 raised while program operation was in progress, however operation completed OK
Warning: DQ5 raised while program operation was in progress, however operation completed OK
Warning: DQ5 raised while program operation was in progress, however operation completed OK
Done
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00020000 : "cfe"
0x00020000-0x007f0000 : "linux"
0x000ff400-0x00600000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x007f0000-0x00800000 : "nvram"
0x00600000-0x007f0000 : "ddwrt"
sflash not supported on this router
Initializing Cryptographic API
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
ip_conntrack version 2.1 (512 buckets, 4096 max) - 336 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_random match loaded
netfilter PSD loaded - (c) astaro AG
ipt_osf: Startng OS fingerprint matching module.
ipt_IPV4OPTSSTRIP loaded
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
starting Architecture code for broadcom
Booting device: Linksys WRH54G
loading switch-core
loading switch-robo
boardflags are 0x20750
Warning: DQ5 raised while program operation was in progress, however operation completed OK
Warning: DQ5 raised while program operation was in progress, however operation completed OK
nvram_commit(): end
sh: can't create /proc/switch/eth1/reset: nonexistent directory
sh: can't create /proc/sys/net/ipv4/tcp_congestion_control: nonexistent directory
Warning: DQ5 raised while program operation was in progress, however operation completed OK
Warning: DQ5 raised while program operation was in progress, however operation completed OK
nvram_commit(): end
vlan0: add 01:00:5e:00:00:01 mcast address to master interface
br0: Bad file descriptor
vlan0: del 01:00:5e:00:00:01 mcast address from vlan interface
vlan0: del 01:00:5e:00:00:01 mcast address from master interface
vlan0: add 01:00:5e:00:00:01 mcast address to master interface
vlan0: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device vlan0 entered promiscuous mode
br0: Bad file descriptor
eth1: Operation not supported
wl0.1: No such device
wl0.2: No such device
wl0.3: No such device
eth1: Invalid argument
eth1: Invalid argument
device eth1 entered promiscuous mode
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
device vlan1 entered promiscuous mode
vlan1: Setting MAC address to  00 3f c6 69 ef 68.
vlan1: dev_set_promiscuity(master, 1)
vlan1: dev_set_allmulti(master, 1)
vlan1: dev_set_promiscuity(master, -1)
device vlan1 left promiscuous mode
vlan1: dev_set_allmulti(master, -1)
vlan1: add 01:00:5e:00:00:01 mcast address to master interface
sh: /tmp/.rc_startup: not found
etherip: Ethernet over IPv4 tunneling driver
The Milkfish Router Services
ERROR: Necessary service setting not found: milkfish_username - aborting.
The Milkfish Router Services
Restoring SIP ddsubscriber database from NVRAM...
Empty.
The Milkfish Router Services
Restoring SIP ddaliases database from NVRAM...
求高手解答！！！！