求助，rg100a 刷了openwrt死活不认u盘

pctr***

启动部分信息：
bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
usb 1-1: new high speed USB device using bcm63xx_ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
bcm63xx_ohci bcm63xx_ohci.0: BCM63XX integrated OHCI controller
bcm63xx_ohci bcm63xx_ohci.0: new USB bus registered, assigned bus number 2
bcm63xx_ohci bcm63xx_ohci.0: irq 13, io mem 0xfffe1400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v3.0
usbcore: registered new interface driver snd-usb-audio
usbcore: registered new interface driver usblp
fuse init (API version 7.9)
usb 1-1: USB disconnect, address 2
usb 1-1: new high speed USB device using bcm63xx_ehci and address 3
usb 1-1: configuration #1 chosen from 1 choice
到这里就没有了，装的是这个版本：https://www.right.com.cn/forum/v ... &extra=page%3D2
file:///C:/Documents%20and%20Settings/kobe/My%20Documents/My%20Pictures/open.jpg
已经安装的软件
kmod-usb-audio 2.6.27.30-brcm63xx-1 installed   
kmod-usb-core 2.6.27.30-brcm63xx-1 installed   
kmod-usb-ohci 2.6.27.30-brcm63xx-1 installed   
kmod-usb-printer 2.6.27.30-brcm63xx-1 installed   
kmod-usb-storage 2.6.27.34-1 installed   
kmod-usb-uhci 2.6.27.30-brcm63xx-1 installed   
kmod-usb2
kmod-scsi-core
kmod-fs-ext3 2.6.27.30-brcm63xx-1 installed   
kmod-fs-ntfs 2.6.27.30-brcm63xx-1 installed   
kmod-fs-vfat


insmod scsi_mod
insmod sd_mod
insmod usb-storage
没有任何提示
请大家指点

yu***

好像还有个SD什么的
你U盘什么格式？

pctr***

fat  ext2 ext3 都试过了

rzd***

dmesg看看

rzd***

参考下面这个帖子看看
https://www.right.com.cn/forum/v ... &extra=page%3D2

shuka***

看你是用的什么固件,DMESG里面看,要是还上不去可能是固件问题,用YUZT的17079,17853都可以认U盘,17079挂U盘有小问题,17853挂U盘没有问题,无线有问题

pctr***

用YUZT的17853无线有问题，提示  phy for wlan0 not found，应该是新内核的问题，我用的这个事luci的，好看，设置也简单，就是挂不上u盘，再问问是不是内核比模块版本低模块就用不了?

shuka***

还是用17079吧,可以挂U盘,无线也可以用,还带QOS,可以限速,开PPS看电影开网页没问题!LUCI的哪个没QOS

pctr***

楼上你用17079装samba3可以用吗？我装了没有nmdb服务，只有smdb

bio***

晕死 我   机器 焊接天线 焊接 坏了 没继续搞了
我记得我有编译usb  到内核  还有文件系统哦
怎么会不行呢