求助K2，硬刷出错

rotma***

按照谈内大佬的教程 ， 一直提示校验错误，大佬们能不能指点一下：

beyon***

电脑ip设置成192.168.2.10，还是2.1，你图片太模糊了，看提示啊

rotma***

beyondywan 发表于 2020-5-13 21:10
电脑ip设置成192.168.2.10，还是2.1，你图片太模糊了，看提示啊

电脑IP192.168.2.10， 网关192.168.1.1   
TFTP from server 192.168.2.10; our IP address is 192.168.2.1
Filename 'test.bin'.

TIMEOUT_COUNT=10,Load address: 0x80100000
Loading: Got ARP REPLY, set server/gtwy eth addr (a:5d:14:0a)
Got it
Got ARP REQUEST, return our IP
T T T T T T T T T T
Retry count exceeded; starting again
TFTP from server 192.168.2.10; our IP address is 192.168.2.1
Filename 'test.bin'.

TIMEOUT_COUNT=10,Load address: 0x80100000
Loading: Got ARP REPLY, set server/gtwy eth addr 7a:5d:14:0a)
Got it
T T T T T T T checksum bad
checksum bad
checksum bad
Got ARP REQUEST, return our IP
Got ARP REQUEST, return our IP
Got ARP REQUEST, return our IP
checksum bad
checksum bad
checksum bad
checksum bad
T T T



一直停在这里，报校验和错误。。。大佬知道怎么解决吗？

beyon***

rotman1228 发表于 2020-5-13 22:32
电脑IP192.168.2.10， 网关192.168.1.1   
TFTP from server 192.168.2.10; our IP address is 192.168. ...

固件名称改为test.bin,ip地址设置成192.168.2.2，网关192.168.2.1试试

rotma***

问题已经解决，给小白和老铁们留点经验吧，一定记住关防火墙，这个不留意，搞了我半天