D-link 524M 接TTl后ctrl+c没用 附TTL输出

thgir***

1.线应该没有接错，因为能正常输出启动过程，启动信息结束后也能输入字符，就是启动过程中按ctr+c没用
2.超级终端和PUTTY都试过了没用



TTL输入如下：

UART1 output test ok
Uart init
mfid=00000001 devid=00002249
Found 1 x 2M flash memory

---RealTek(RTL8186)at 2006.09.28-17:00+0800 version 1.4 [16bit](180MHz)
no sys signature at 00010000!
no sys signature at 00020000!
Jump to image start=0x80300000...
decompressing kernel:
Uncompressing Linux... done, booting the kernel.
done decompressing kernel.
Realtek FastPath v1.07a
serial console detected.  Disabling virtual terminals.
init started:  BusyBox v1.00-pre8 (2007.09.24-02:32+0000) multi-call binary


BusyBox v1.00-pre8 (2007.09.24-02:32+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.

this time is gw
killall: pptp.sh: no process killed
killall: pppoe.sh: no process killed
start wlan interface
Initialize wlan0 interface
SIOCGIFFLAGS: No such device
Using wlan script...
232
233
/proc/sys/net/ipv4/: cannot create
# help  

Built-in commands:
-------------------
        . : break cd continue eval exec exit export help login newgrp
        read readonly set shift times trap umask wait

#
#
#

孤独***

TTL线接法说下行吗

http***

无法输入是因为你ttl接线不对。
我的dir525m a1版本的白色的，芯片是RTL8186 ，ttl接线方法如下

freez***

貌似抓取时间晚了吧 路由通电 就该 按ctrl+c了 win7 用超级终端 能中断

x***

大螃蟹的，你搞TTL为哪般啊