|
|
write phy_id=1, reg(0x8074):0x0670
write phy_id=2, reg(0x8074):0x0670
write phy_id=3, reg(0x8074):0x0670
write phy_id=4, reg(0x8074):0x0670
bootwait is off, bootdelay=5
Hit any key to stop autoboot: 0
trigger button release!
boot from rootfs 0
miwifi: check crash in rmem !
ubi0: attaching mtd1
ubi0: scanning is finished
ubi0: attached mtd1 (name "mtd=0", size 35 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 286, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1407838219
ubi0: available PEBs: 40, total reserved PEBs: 246, PEBs reserved for bad PEB handling: 20
Read 0 bytes from volume kernel to 44000000
No size specified -> Using max size (4317184)
Could not find PCI in device tree
## Loading kernel from FIT Image at 44000000 ...
Using 'config@ac04' configuration
Trying 'kernel@1' kernel subimage
Description: ARM64 OpenWrt Linux-4.4.60
Type: Kernel Image
Compression: gzip compressed
Data Start: 0x440000e8
Data Size: 3957925 Bytes = 3.8 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x41080000
Entry Point: 0x41080000
Hash algo: crc32
Hash value: 2ce02202
Hash algo: sha1
Hash value: 3fe50e4ae8337afb7b96a86638221462ee455ad3
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 44000000 ...
Using 'config@ac04' configuration
Trying 'fdt@ac04' fdt subimage
Description: ARM64 OpenWrt qcom-ipq807x-hkxx device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x443da1c0
Data Size: 79565 Bytes = 77.7 KiB
Architecture: AArch64
Hash algo: crc32
Hash value: b4ed9ff8
Hash algo: sha1
Hash value: 6119388eb1ae982f4a3586f267c7ea804db115bb
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x443da1c0
Uncompressing Kernel Image ... OK
Loading Device Tree to 4a3e9000, end 4a3ff6cc ... OK
Using machid 0x8010010 from environment
Starting kernel ...
Jumping to AARCH64 kernel via monitor
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.60 (jenkins@92a4a83f0eca) (gcc version 5.5.0 (OpenWrt GCC 5.5.0 unknown) ) #0 SMP PREEMPT Tue Aug 18 13:50:52 2020
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] Ignoring memory range 0x40000000 - 0x41000000
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] PERCPU: Embedded 14 pages/cpu @ffffffc01ef5c000 s19096 r8192 d30056 u57344
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 105840
[ 0.000000] Kernel command line: ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait uart_en=1 swiotlb=1
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000] software IO TLB [mem 0x5fe58000-0x5fe98000] (0MB) mapped at [ffffffc01ee58000-ffffffc01ee97fff]
[ 0.000000] Memory: 402208K/430080K available (5491K kernel code, 654K rwdata, 2796K rodata, 224K init, 405K bss, 27872K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbdc0040000 - 0xffffffbdc0800000 ( 7 MB actual)
[ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)
[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc01f000000 ( 496 MB)
[ 0.000000] .init : 0xffffffc00089a000 - 0xffffffc0008d2000 ( 224 KB)
[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc0008997f4 ( 8294 KB)
[ 0.000000] .data : 0xffffffc0008e1000 - 0xffffffc000984800 ( 654 KB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000397] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000408] pid_max: default: 32768 minimum: 301
[ 0.000495] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000505] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.001039] Initializing cgroup subsys io
[ 0.001055] Initializing cgroup subsys memory
[ 0.001084] Initializing cgroup subsys devices
[ 0.001099] Initializing cgroup subsys freezer
[ 0.001109] Initializing cgroup subsys net_cls
[ 0.001119] Initializing cgroup subsys pids
[ 0.001370] EFI services will not be available.
[ 0.001395] ASID allocator initialised with 65536 entries
[ 0.051858] MSM Memory Dump base table set up
[ 0.051883] MSM Memory Dump apps data table set up
[ 0.090116] Detected VIPT I-cache on CPU1
[ 0.090160] CPU1: Booted secondary processor [410fd034]
[ 0.120103] Detected VIPT I-cache on CPU2
[ 0.120130] CPU2: Booted secondary processor [410fd034]
[ 0.150130] Detected VIPT I-cache on CPU3
[ 0.150156] CPU3: Booted secondary processor [410fd034]
[ 0.150208] Brought up 4 CPUs
[ 0.150234] SMP: Total of 4 processors activated.
[ 0.150244] CPU: All CPU(s) started at EL1
[ 0.150267] alternatives: patching kernel code
[ 0.167033] DMI not present or invalid.
[ 0.167280] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.167304] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 0.167528] pinctrl core: initialized pinctrl subsystem
[ 0.168461] NET: Registered protocol family 16
[ 0.190059] cpuidle: using governor ladder
[ 0.220076] cpuidle: using governor menu
[ 0.220224] vdso: 2 pages (1 code @ ffffffc0008e9000, 1 data @ ffffffc0008e8000)
[ 0.220365] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.220458] CPU: unavail, SoC Version: 2.0
[ 0.220494] <CORE> glink_init: IPC Logging Disabled
[ 0.220893] IPC logging disabled
[ 0.220899] IPC logging disabled
[ 0.220904] IPC logging disabled
[ 0.220908] IPC logging disabled
[ 0.220913] IPC logging disabled
[ 0.223607] Soc version is not 1, changing clock offsets
[ 0.235008] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel !
[ 0.237019] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel !
[ 0.239193] msm_rpm_dev_probe: APSS-RPM communication over GLINK
[ 0.240086] sps:sps is ready.
[ 0.249847] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 2
[ 0.256363] pps_core: LinuxPPS API ver. 1 registered
[ 0.256375] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.256399] PTP clock support registered
[ 0.256553] dmi: Firmware registration failed.
[ 0.257829] Advanced Linux Sound Architecture Driver Initialized.
[ 0.258480] clocksource: Switched to clocksource arch_sys_counter
[ 0.261735] NET: Registered protocol family 2
[ 0.262324] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.262386] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.262482] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.262532] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.262556] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.262725] NET: Registered protocol family 1
[ 0.270363] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.270381] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.273637] io scheduler noop registered
[ 0.273653] io scheduler deadline registered (default)
[ 0.275694] 20000000.pci supply vdda not found, using dummy regulator
[ 0.275771] 20000000.pci supply vdda_phy not found, using dummy regulator
[ 0.275806] 20000000.pci supply vdda_refclk not found, using dummy regulator
[ 0.276355] PCI host bridge /soc/pci@20000000 ranges:
[ 0.276382] IO 0x20200000..0x202fffff -> 0x20200000
[ 0.276397] MEM 0x20300000..0x20ffffff -> 0x20300000
[ 1.308528] qcom-pcie 20000000.pci: phy link never came up
[ 1.310071] qcom-pcie 20000000.pci: hostinit failed
[ 1.310081] qcom-pcie 20000000.pci: cannot initialize host
[ 1.310225] qcom-pcie: probe of 20000000.pci failed with error -110
[ 1.315561] NET: Registered protocol family 27
[ 1.315574] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled
[ 1.315586] qmi_log_init: IPC Logging disabled
[ 1.315591] qmi_log_init: IPC Logging disabled
[ 1.315676] msm_rpm_log_probe: OK
[ 1.316241] msm-dcc b3000.dcc: DCC XPU is not specified
[ 1.316484] msm-dcc b3000.dcc: DCC SRAM dump setup failed
[ 1.316507] msm-dcc b3000.dcc: jiffies_64: 0xffff8b52, cntvct_64: 0x658daa8
[ 1.316519] msm-dcc b3000.dcc: gcnt_hi: 0x00000000(0xffffff80003cc004)
[ 1.316529] msm-dcc b3000.dcc: gcnt_lo: 0x0658dc5d(0xffffff80003cc000)
[ 1.317054] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set
[ 1.317692] msm_serial 78b3000.serial: msm_serial: detected port #0
[ 1.317727] msm_serial 78b3000.serial: uartclk = 3686400
[ 1.317760] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 77, base_baud = 230400) is a MSM
[ 1.317778] msm_serial: console setup on port #0
[ 2.054248] console [ttyMSM0] enabled
[ 2.059213] msm_serial 78b1000.serial: msm_serial: detected port #1
[ 2.062480] msm_serial 78b1000.serial: uartclk = 19200000
[ 2.068567] 78b1000.serial: ttyMSM1 at MMIO 0x78b1000 (irq = 78, base_baud = 1200000) is a MSM
[ 2.074391] msm_serial: driver initialized
[ 2.082871] msm_serial_hsl_init: driver initialized
[ 2.095614] brd: module loaded
[ 2.096290] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 2.099054] m25p80 spi32766.0: unrecognized JEDEC id bytes: ff, ff, ff
[ 2.105824] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x61
[ 2.111144] nand: GigaDevice PSR1GA30DT
[ 2.117608] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 2.121287] 15 ofpart partitions found on MTD device qcom_nand.0
[ 2.128822] Creating 15 MTD partitions on "qcom_nand.0":
[ 2.134975] 0x000000000000-0x000000100000 : "0:SBL1"
[ 2.141946] 0x000000100000-0x000000200000 : "0:MIBIB"
[ 2.146739] 0x000000200000-0x000000500000 : "0 SEE"
[ 2.153504] 0x000000500000-0x000000580000 : "0 EVCFG"
[ 2.156268] 0x000000580000-0x000000600000 : "0:RPM"
[ 2.161236] 0x000000600000-0x000000680000 : "0:CDT"
[ 2.165997] 0x000000680000-0x000000700000 : "0:APPSBLENV"
[ 2.170867] 0x000000700000-0x000000800000 : "0:APPSBL"
[ 2.176850] 0x000000800000-0x000000880000 : "0:ART"
[ 2.181492] 0x000000880000-0x000000900000 : "bdata"
[ 2.186212] 0x000000900000-0x000000980000 : "crash"
[ 2.191062] 0x000000980000-0x000000a00000 : "crash_syslog"
[ 2.195923] 0x000000a00000-0x000002dc0000 : "rootfs"
[ 2.232905] mtd: device 12 (rootfs) set to be root filesystem
[ 2.233230] mtdsplit: no squashfs found in "rootfs"
[ 2.237633] 0x000002dc0000-0x000007040000 : "rootfs_1"
[ 2.301934] 0x000007040000-0x0000070c0000 : "rsvd0"
[ 2.303519] spmi spmi-0: PMIC Arb Version-2 (0x20010000)
[ 2.308511] libphy: Fixed MDIO Bus: probed
[ 2.531810] qca-mdio 90000.mdio: Could not find phy-reset-gpio
[ 2.531918] libphy: qca_mdio: probed
[ 2.537747] qca-mdio 90000.mdio: qca-mdio driver was registered
[ 2.540478] Unable to create IPC log context!
[ 2.546195] cnss: Platform driver probed successfully.
[ 2.550659] Skip QCA8074V1 in V2 platform
[ 2.555550] cnss_genl: genl_register_family fail: -17
[ 2.559575] cnss: CNSS genl init failed -17
[ 2.564560] cnss: Platform driver probed successfully.
[ 2.568729] i2c /dev entries driver
[ 2.579163] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 2.579625] sdhci: Secure Digital Host Controller Interface driver
[ 2.586659] sdhci: Copyright(c) Pierre Ossman
[ 2.592676] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.597723] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
[ 2.602879] ICE IRQ = 81
[ 2.611381]
[ 2.611381] Version Rollback Feature Disabled
[ 2.614326] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000008b04000
[ 2.619326] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000008b04000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000008b04000
[ 2.636590] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000008b04000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000008b04000
[ 2.652474] sps:BAM 0x0000000008b04000 is registered.[ 2.660204] DEV CI test message
[ 2.664905] subsys-restart: ssr_parse_restart_orders(): q6v5_m3 device has been added to q6v5-m3's restart group
[ 2.667665] subsys-restart: ssr_parse_restart_orders(): q6v5_wcss device has been added to q6v5-m3's restart group
[ 2.678168] remoteproc remoteproc0: q6v5-m3 is available
[ 2.688605] SPMI VADC - Min ch: 0 Max ch: 15
[ 2.695368] of_graph_get_next_endpoint(): no port node found in /soc/csr@6001000
[ 2.698025] coresight-csr 6001000.csr: CSR initialized
[ 2.705487] of_graph_get_next_endpoint(): no port node found in /soc/cti@6010000
[ 2.710445] of_graph_get_next_endpoint(): no port node found in /soc/cti@6011000
[ 2.717968] of_graph_get_next_endpoint(): no port node found in /soc/cti@6012000
[ 2.725365] of_graph_get_next_endpoint(): no port node found in /soc/cti@6013000
[ 2.732738] of_graph_get_next_endpoint(): no port node found in /soc/cti@6014000
[ 2.740119] of_graph_get_next_endpoint(): no port node found in /soc/cti@6015000
[ 2.747486] of_graph_get_next_endpoint(): no port node found in /soc/cti@6016000
[ 2.754879] of_graph_get_next_endpoint(): no port node found in /soc/cti@6017000
[ 2.762259] of_graph_get_next_endpoint(): no port node found in /soc/cti@6018000
[ 2.769631] of_graph_get_next_endpoint(): no port node found in /soc/cti@6019000
[ 2.777009] of_graph_get_next_endpoint(): no port node found in /soc/cti@601a000
[ 2.784392] of_graph_get_next_endpoint(): no port node found in /soc/cti@601b000
[ 2.791774] of_graph_get_next_endpoint(): no port node found in /soc/cti@601c000
[ 2.799148] of_graph_get_next_endpoint(): no port node found in /soc/cti@601d000
[ 2.806514] of_graph_get_next_endpoint(): no port node found in /soc/cti@601e000
[ 2.813906] of_graph_get_next_endpoint(): no port node found in /soc/cti@601f000
[ 2.821289] of_graph_get_next_endpoint(): no port node found in /soc/cti@6198000
[ 2.828828] of_graph_get_next_endpoint(): no port node found in /soc/cti@6199000
[ 2.836149] of_graph_get_next_endpoint(): no port node found in /soc/cti@619a000
[ 2.843575] of_graph_get_next_endpoint(): no port node found in /soc/cti@619b000
[ 2.850990] of_graph_get_next_endpoint(): no port node found in /soc/cti@610c000
[ 2.858352] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000006044000
[ 2.865415] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000006044000
[ 2.882510] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000006044000
[ 2.898383] sps:BAM 0x0000000006044000 is registered.[ 2.906015] coresight-tmc 6028000.tmc: TMC initialized
[ 2.910834] coresight-tmc 6027000.tmc: TMC initialized
[ 2.915964] coresight-funnel 6021000.funnel: FUNNEL initialized
[ 2.921024] coresight-funnel 6100000.funnel: FUNNEL initialized
[ 2.926813] coresight-funnel 6120000.funnel: FUNNEL initialized
[ 2.932740] coresight-funnel 61a1000.funnel: FUNNEL initialized
[ 2.939169] coresight-etm4x 619c000.etm: ETM 4.0 initialized
[ 2.944852] coresight-etm4x 619d000.etm: ETM 4.0 initialized
[ 2.950806] coresight-etm4x 619e000.etm: ETM 4.0 initialized
[ 2.956471] coresight-etm4x 619f000.etm: ETM 4.0 initialized
[ 2.961758] coresight-replicator-qcom 6026000.replicator: REPLICATOR 1.0 initialized
[ 2.967484] coresight-stm 6002000.stm: STM initialized
[ 2.976023] of_graph_get_next_endpoint(): no port node found in /soc/hwevent@6101000
[ 2.979921] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized
[ 2.990156] Netfilter messages via NETLINK v0.30.
[ 2.995118] ip_set: protocol 6
[ 3.000414] NET: Registered protocol family 10
[ 3.003411] NET: Registered protocol family 17
[ 3.007098] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 3.011548] Bridge firewalling registered
[ 3.024261] 8021q: 802.1Q VLAN Support v1.8
[ 3.029661] <CORE> glink_core_register_transport: IPC Logging disabled
[ 3.032256] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 2
[ 3.038771] msm_glink_smem_native_xprt rx fifo not found
[ 3.046101] pmd9655_s3: supplied by e-smps1-reg
[ 3.051713] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
[ 3.055760] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1
[ 3.062374] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
[ 3.070023] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
[ 3.077518] cpr3_mem_acc_init: apc: not using memory accelerator regulator
[ 3.086677] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 704000 uV
[ 3.093625] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 816000 uV
[ 3.103650] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 713, quot_offset[ 7]= 0
[ 3.113420] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 921, quot_offset[ 7]= 205
[ 3.124367] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
[ 3.136475] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 800000 KHz
[ 3.142081] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1017600 KHz
[ 3.149356] DEV CI test message
[ 3.158146] remoteproc remoteproc1: q6v5-wcss is available
[ 3.160928] ubi0: attaching mtd12
[ 3.350155] ubi0: scanning is finished
[ 3.356840] ubi0: attached mtd12 (name "rootfs", size 35 MiB)
[ 3.356860] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 3.361565] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 3.368326] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 3.375190] ubi0: good PEBs: 286, bad PEBs: 0, corrupted PEBs: 0
[ 3.381959] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 3.388206] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1407838219
[ 3.395247] ubi0: available PEBs: 40, total reserved PEBs: 246, PEBs reserved for bad PEB handling: 20
[ 3.404543] ubi0: background thread "ubi_bgt0d" started, PID 117
[ 3.414354] hctosys: unable to open rtc device (rtc0)
[ 3.444897] crash_kernel_init, res rsvd1, 50700000, 400000, /reserved-memory/rsvd1@50700000
[ 3.444932] mtd dev crash, size 0x80000
[ 3.452813] crash_kernel_init, crash init, res->start:50700000,crash_buf:0xffffff8001c80000,crash_buf_len 0x7ffe4, crash_avail_sz 0x80000
[ 3.456487] Crash kernel dumper registered ok!
[ 3.469189] crash_syslog_init, res rsvd2, 50b00000, 400000, /reserved-memory/rsvd2@50b00000
[ 3.473668] mtd dev crash_syslog, size 0x80000
[ 3.482810] crash_syslog_init, crash init, crash_buf_len 0x3ffe4, crash_avail_sz 0x40000
[ 3.486959] Crash syslog dumper register ok!
[ 3.495410] pmd9655_ldo11: disabling
[ 3.500131] ALSA device list:
[ 3.503342] No soundcards found.
[ 3.508574] VFS: Mounted root (squashfs filesystem) readonly on device 31:16.
[ 3.509649] Freeing unused kernel memory: 224K (ffffffc00089a000 - ffffffc0008d2000)
[ 3.516739] Freeing alternatives memory: 44K (ffffffc0008d2000 - ffffffc0008dd000)
[ 3.864631] init: Console is alive
[ 3.864750] init: - watchdog -
[ 3.987314] random: nonblocking pool is initialized
[ 4.978802] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 4.994329] usbcore: registered new interface driver usbfs
[ 4.994381] usbcore: registered new interface driver hub
[ 4.998819] usbcore: registered new device driver usb
[ 5.005548] Button Hotplug driver version 0.4.1
[ 5.011583] SCSI subsystem initialized
[ 5.015317] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.017696] ehci-platform: EHCI generic platform driver
[ 5.236560] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 5.236599] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 5.241138] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010
[ 5.248534] xhci-hcd xhci-hcd.0.auto: irq 189, io mem 0x08a00000
[ 5.257563] hub 1-0:1.0: USB hub found
[ 5.263440] hub 1-0:1.0: 1 port detected
[ 5.267174] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 5.271094] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 5.276391] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.284210] hub 2-0:1.0: USB hub found
[ 5.292253] hub 2-0:1.0: 1 port detected
[ 5.298596] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 5.307007] init: - preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 8.664620] mount_root: mounting /dev/root
hexdump: /tmp/ubi_data_firstpage.bin: No such file or directory
rm: can't remove '/tmp/ubi_data_firstpage.bin': No such file or directory
flag_format_overlay is set, format
ubiattach: error!: strtoul: unable to parse the number ''
ubiattach: error!: bad MTD device number: ""
cat: can't open '/sys/class/ubi/ubi1/dev': No such file or directory
cat: can't open '/sys/class/ubi/ubi1/dev': No such file or directory
BusyBo[ 8.738005] UBIFS error (pid: 199): cannot open "ubi1_0", error -19x v1.25.1 (2020-08-19 02:55:57 UTC) multi-call binary.
Usage: mknod [-m MODE] NAME TYPE MAJOR MINOR
Create a special file (block, character, or pipe)
-m MODE Creation mode (default a=rw)
TYPE:
b Block device
c or u Character device
p Named pipe (MAJOR and MINOR are ignored)
libubi: error!: cannot get information about "/dev/ubi1"
error 2 (No such file or directory)
ubimkvol: error!: error while probing "/dev/ubi1"
error 2 (No such file or directory)
mount: mounting ubi1_0 on /data failed: No such device
Trying to save syslog to crash...
target mtd /dev/mtd10
MTD Type: 4
MTD total size: 80000 bytes
MTD erase size: 20000 bytes
Beging Eraseing Block 0x400f28
End...
Unlocking crash ...
Writing from /tmp/.mtd_crash_tmp to crash ...
Log saved to crash.
FATAL: Data mount fail again. Restoring defaults.
ubiattach: error!: strtoul: unable to parse the number ''
ubiat
[ 9.171559] UBIFS error (pid: 210): cannot open "ubi1_0", error -19tach: error!: bad MTD device number: ""
mount: mounting ubi1_0 on /data failed: No such device
[ 9.23▒
|
|
/1 
简体中文
繁體中文
English
日本語
Deutsch
한국 사람
بالعربية
TÜRKÇE
português
คนไทย
IP卡
狗仔卡
置顶卡
沉默卡
喧嚣卡
顶贴卡
显身卡
没别的办法了
