padavan如何开机启用python程序

qingt***

在脚本那里也设置过了，均无法实现，我怀疑是我opt挂载的原因，程序执行时，opt未成功挂载，该如何解决

Feb 24 15:13:58 【防火墙规则】: 脚本完成
Feb 24 15:13:58 MI-R3G: WAN up (eth3)
Feb 24 15:13:58 【WebUI】: 稍等后启动相关设置
Feb 24 15:13:58 admin: 运行后 WAN 状态: WAN 状态:【up】, WAN 接口:【eth3】, WAN IP:【49.140.116.165】
Feb 24 15:13:58 crond[648]: crond (busybox 1.29.3) started, log level 8
Feb 24 15:14:00 kernel: br0: port 3(ra0) entered forwarding state
Feb 24 15:14:00 kernel: br0: port 2(rai0) entered forwarding state
Feb 24 15:14:00 kernel: br0: port 1(eth2) entered forwarding state
Feb 24 15:14:08 NTP Client: Synchronizing time to ntp1.aliyun.com.
Feb 24 15:14:28 【WebUI】: 稍等后启动相关设置
Feb 24 15:14:28 miniupnpd[664]: version 2.0 starting UPnP-IGD ext if eth3 BOOTID=1708758868
Feb 24 15:14:28 miniupnpd[664]: HTTP listening on port 28563
Feb 24 15:14:28 crond[709]: crond (busybox 1.29.3) started, log level 8
Feb 24 15:14:29 httpd[710]: Server listening port 80 (HTTP).
Feb 24 15:14:29 dropbear[716]: Running in background
Feb 24 15:14:29 kernel: Load Ralink WDG Timer Module
Feb 24 15:14:38 NTP Client: Synchronizing time to 2001:470:0:50::2.
Feb 24 15:14:44 【自定义脚本0】: 脚本完成
Feb 24 15:15:04 【自定义脚本】: 等待联网后开始脚本
Feb 24 15:15:08 NTP Client: Synchronizing time to ntp1.aliyun.com.
Feb 24 15:15:22 【自定义脚本】: 等待联网后开始脚本
Feb 24 15:15:38 NTP Client: Synchronizing time to 2001:470:0:50::2.
Feb 24 15:15:40 【自定义脚本】: 等待联网后开始脚本
Feb 24 15:15:58 【自定义脚本】: 等待联网超时
Feb 24 15:15:58 【opt】: opt 没挂载，重新挂载
Feb 24 15:15:58 【opt】: /media/AiDisk_a1/opt文件夹模式挂载/opt
Feb 24 15:16:00 【opt】: opt 挂载正常：/dev/sda1