设为首页收藏本站
切换到窄版

 找回密码
 立即注册

QQ登录

只需一步，快速开始

搜索
恩山无线论坛»论坛 › 无线设备硬件相关板块 › 新手入门及其它(硬件) › 请教一下841n ttl 显示
广告投放联系QQ68610888
返回列表 发新帖
查看: 2395|回复: 2

请教一下841n ttl 显示

[复制链接]
qpanda
发表于 2014-3-16 16:05 | 显示全部楼层 |阅读模式
今天把我的老841n v3.4拿出来焊上了ttl，但在使用SecureCRT时显示如下，并不显示我看论坛中说的 u-boot信息，这个是怎么回事，请大虾解惑。。。
  1. 酟inux version 2.6.15--LSDK-6.1.1.40 gcc version 3.4.4 #64 Mon Jul 6 15:47:00 CST 2009
  2. flash_size passed from bootloader = 8
  3. CPU revision is: 00019374
  4. Determined physical RAM map:
  5. memory: 02000000 @ 00000000 (usable)
  6. Built 1 zonelists
  7. Kernel command line: console=ttyS0,115200 root=31:2 rootfstype=squashfs init=/sbin/init
  8. Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
  9. Primary data cache 32kB, 4-way, linesize 32 bytes.
  10. Synthesized TLB refill handler (20 instructions).
  11. Synthesized TLB load handler fastpath (32 instructions).
  12. Synthesized TLB store handler fastpath (32 instructions).
  13. Synthesized TLB modify handler fastpath (31 instructions).
  14. Cache parity protection disabled
  15. PID hash table entries: 256 (order: 8, 4096 bytes)
  16. Using 200.000 MHz high precision timer.
  17. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  18. Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  19. Memory: 30152k/32768k available (1406k kernel code, 2600k reserved, 294k data, 108k init, 0k highmem)
  20. Mount-cache hash table entries: 512
  21. Checking for 'wait' instruction...  available.
  22. NET: Registered protocol family 16
  23. Jumpstart button pressed.
  24. SCSI subsystem initialized
  25. AR7100 GPIOC major 0
  26. squashfs: version 3.3 (2007/10/31) Phillip Lougher
  27. Initializing Cryptographic API
  28. io scheduler noop registered
  29. io scheduler deadline registered
  30. Serial: 8250/16550 driver $Revision: #1 $ 1 ports, IRQ sharing disabled
  31. serial8250.0: ttyS0 at MMIO 0x0 (irq = 19) is a 16550A
  32. RAMDISK driver initialized: 1 RAM disks of 8192K size 1024 blocksize
  33. PPP generic driver version 2.4.2
  34. NET: Registered protocol family 24

  36. AR7100_SPI_RD_STATUS-old : 0
  37. cmdlinepart partition parsing not available
  38. Searching for RedBoot partition table
  39. 5 RedBoot partitions found on MTD device ar7100-nor0
  40. Creating 5 MTD partitions on "ar7100-nor0":
  41. 0x00000000-0x00020000 : "boot"
  42. 0x00020000-0x00120000 : "kernel"
  43. 0x00120000-0x003e0000 : "rootfs"
  44. 0x003e0000-0x003f0000 : "config"
  45. 0x003f0000-0x00400000 : "art"
  46. NET: Registered protocol family 2
  47. IP route cache hash table entries: 512 (order: -1, 2048 bytes)
  48. TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  49. TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  50. TCP: Hash tables configured (established 2048 bind 2048)
  51. TCP reno registered
  52. TCP bic registered
  53. NET: Registered protocol family 1
  54. NET: Registered protocol family 17
  55. 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  56. All bugs added by David S. Miller <davem@redhat.com>
  57. ar7100wdt_init: Registering WDT success
  58. VFS: Mounted root (squashfs filesystem) readonly.
  59. Freeing unused kernel memory: 108k freed
  60. init started:  BusyBox v1.01 (2009.06.10-11:32+0000) multi-call binary
  61. Algorithmics/MIPS FPU Emulator v1.5
  62. ip_conntrack version 2.4 (256 buckets, 5120 max) - 240 bytes per conntrack
  63. statistics: module license 'BSD' taints kernel.
  64. insmod: cannot open module `/lib/modules/2.6.15/kernel/flashid.ko': No such file or directory
  65. Now flash open!
  66. Now flash open!

  68. (none) mips #64 Mon Jul 6 15:47:00 CST 2009 (none)
  69. (none) login: device eth0 entered promiscuous mode
  70. br0: port 1(eth0) entering learning state
  71. br0: topology change detected, propagating
  72. br0: port 1(eth0) entering forwarding state
  73. ath_hal: 0.9.17.1 (AR5416, DEBUG, REGOPS_FUNC, WRITE_EEPROM, 11D)
  74. wlan: 0.8.4.2 (Atheros/multi-bss)
  75. ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
  76. ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
  77. ath_ahb: 0.9.4.5 (Atheros/multi-bss)
  78. COEXIST is defined.
  79. Howl Revision ID 0xb8 <6>wifi0: Atheros AR9100 WiSoC: mem=0xb80c0000, irq=2
  80. wlan: mac acl policy registered
  81. ieee80211_ioctl_setmode: CHH Mode: 11NGHT40MINUS
  82. ath_set_config: Setting ATH parameter
  83. ath_set_config: Setting ATH parameter
  84. ath_set_config: Setting ATH parameter
  85. ieee80211_ioctl_setparam: CHH Calling ieee80211_open
  86. ath_set_config: Setting ATH parameter
  87. ath_set_config: Setting ATH parameter
  88. ieee80211_ioctl_setparam: CHH Calling ieee80211_open
  89. Force rf_pwd_icsyndiv to 1 on 2412 (1 0)
  90. --AP ar5416InitUserSettings ahp->ah_miscMode 0xc
  91. ar5416Reset Setting CFG 0x10a
  92. Country ie is CN
  93. Force rf_pwd_icsyndiv to 2 on 2427 (1 0)
  94. --AP ar5416InitUserSettings ahp->ah_miscMode 0xc
  95. ar5416Reset Setting CFG 0x10a
  96. ath_set_config: Setting ATH parameter
  97. Force rf_pwd_icsyndiv to 2 on 2427 (1 0)
  98. --AP ar5416InitUserSettings ahp->ah_miscMode 0xc
  99. ar5416Reset Setting CFG 0x10a
  100. ath_netdev_stop: The stopping of the running
  101. ar5416StopDmaReceive: dma failed to stop in 10ms
  102. AR_CR=0x00000024
  103. AR_DIAG_SW=0x40000020
  104. ieee80211_ioctl_setparam: CHH Calling ieee80211_open
  105. ieee80211_ioctl_setparam: CHH Calling ieee80211_open
  106. ieee80211_ioctl_setparam: CHH Calling ieee80211_open
  107. Force rf_pwd_icsyndiv to 2 on 2427 (1 0)
  108. --AP ar5416InitUserSettings ahp->ah_miscMode 0xc
  109. ar5416Reset Setting CFG 0x10a
  110. Country ie is CN
  111. br0: port 1(eth0) entering disabled state
  112. br0: port 1(eth0) entering learning state
  113. br0: topology change detected, propagating
  114. br0: port 1(eth0) entering forwarding state
  115. device ath0 entered promiscuous mode
  116. br0: port 2(ath0) entering learning state
  117. br0: topology change detected, propagating
  118. br0: port 2(ath0) entering forwarding state
  119. ath_netdev_stop: The stopping of the running
  120. ar5416StopDmaReceive: dma failed to stop in 10ms
  121. AR_CR=0x00000024
  122. AR_DIAG_SW=0x40000020
  123. br0: port 2(ath0) entering disabled state
  124. Force rf_pwd_icsyndiv to 2 on 2427 (1 0)
  125. --AP ar5416InitUserSettings ahp->ah_miscMode 0xc
  126. ar5416Reset Setting CFG 0x10a
  127. Country ie is CN
  128. br0: port 2(ath0) entering learning state
  129. br0: topology change detected, propagating
  130. br0: port 2(ath0) entering forwarding state
  131. ath_netdev_stop: The stopping of the running
  132. ar5416StopDmaReceive: dma failed to stop in 10ms
  133. AR_CR=0x00000024
  134. AR_DIAG_SW=0x40000020
  135. br0: port 2(ath0) entering disabled state
  136. ieee80211_ioctl_setparam: CHH Calling ieee80211_open
  137. Force rf_pwd_icsyndiv to 2 on 2427 (1 0)
  138. --AP ar5416InitUserSettings ahp->ah_miscMode 0xc
  139. ar5416Reset Setting CFG 0x10a
  140. Country ie is CN
  141. br0: port 2(ath0) entering learning state
  142. br0: topology change detected, propagating
  143. br0: port 2(ath0) entering forwarding state
复制代码



t8k-ttl-udc, ttl和485

相关帖子

请千万不要发表任何涉政、涉爆、涉恐、涉军类的内容，只论技术、莫谈政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流。
回复

使用道具 举报

qpanda
 楼主| 发表于 2014-3-16 16:06 | 显示全部楼层
补充一句，原版还未三方系统
请千万不要发表任何涉政、涉爆、涉恐、涉军类的内容，只论技术、莫谈政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流。
回复 支持 反对

使用道具 举报

发表于 2014-3-19 18:24 | 显示全部楼层
这些信息都是U-Boot之后的信息了。
lz确定通电就输出这些信息？
请千万不要发表任何涉政、涉爆、涉恐、涉军类的内容，只论技术、莫谈政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流。
回复 支持 反对

使用道具 举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-6-9 12:44

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱：js12377 | @jischina.com.cn 举报电话：025-88802724 本站不良内容举报信箱：68610888@qq.com

快速回复 返回顶部 返回列表