|
Help the download, please.
Let's try common efforts to revive the topic, and to solve the problem with the router
jwnr2000-4emrus. So, what has been done: obtained through the console logs download
http://rghost.ru/8SDxG7FCp domru-boot-logs logs download bootloader
one full one with the pinched reset.
Drain the original firmware programmer with watering stick
http://rghost.ru/6LcWkQR8V full-flash-4emrus.zip
Tested 3 firmware from other routers with the same iron.
(via programmer, fullflash), attached
http://rghost.ru/7gcT5t4Dn dir300ad-fullflash.zip
http://rghost.ru/6tBrMbx2N repitersWS-WN523N2-WN518W2-fullflash.zip
From repeaters, are not loaded from the word at all.
From Dlink issues booting the console and all.
In both cases all LEDs.
The question, apparently so as to cross the original firmware with any other,
through a hex editor. those. that from what address to insert in the original firmware.
If there are options, I'll check their soldering iron. |
|