设为首页收藏本站

简体中文 繁體中文 English 日本語 Deutsch 한국 사람 بالعربية TÜRKÇE português คนไทย

切换到窄版

 找回密码
 立即注册

QQ登录

只需一步，快速开始

搜索
恩山无线论坛»论坛 › 无线设备硬件相关板块 › 无线路由器硬件改造以及故障维修 › TTL线修复路由不成功
广告投放联系QQ68610888
返回列表 发新帖
查看: 3034|回复: 12

TTL线修复路由不成功

[复制链接]
| 显示全部楼层 |阅读模式
TTL线修复路由，用SecureCRT 5.1连接上后一直重得出现：
U-Boot 1.1.3 (Jan 14 2010 - 20:32:38)

Board: Ralink APSoC DRAM:  64 MB
relocate_code Pointer at: 8377c000

Set info->start[0]=BF000000
flash_protect ON: from 0xBF000000 to 0xBF022F47
protect on 0
protect on 1
protect on 2
flash_protect ON: from 0xBF030000 to 0xBF03FFFF
protect on 3
*** Warning - bad CRC, using default environment

============================================
Ralink UBoot Version: 3.2
--------------------------------------------
ASIC 3052_MP2 (Port5<->Phy)
DRAM COMPONENT: 256Mbits
DRAM BUS: 32BIT
Total memory: 64 MBytes
Date:Jan 14 2010  Time:20:32:38
============================================
icache: sets:256, ways:4, linesz:32 ,total:32768
dcache: sets:128, ways:4, linesz:32 ,total:16384

##### The CPU freq = 384 MHZ ####

SDRAM bus set to 32 bit
SDRAM size =64 Mbytes

Please choose the operation:
   1: Load system code to SDRAM via TFTP.
   2: Load system code then write to Flash via TFTP.
   3: Boot system code via Flash (default).
   4: Entr boot command line interface.
   9: Load Boot Loader code then write to Flash via TFTP.
0
   
3: System Boot system code via Flash.

eth_register  
Eth0 (10/100-M)
enetvar=ethaddr,Eth addr:00:0C:43:09:26:BB

eth_current->name = Eth0 (10/100-M)

verify is 1
## load addr bf050000 ...
print img header
   Magic:       [00000000]
   CRC:         [00000000]
   Image Name:   
   Created:      1970-01-01   0:00:00 UTC

System Control Status = 0x20440000
   Image Type:   Invalid CPU Invalid OS Invalid Image (uncompressed)
   Data Size:    0 Bytes =  0 kB
   Load Address: 00000000
   Entry Point:  00000000
Bad Magic Number , 00000000
## Booting image at bf050000 ...
sizeof image_header_t is 64
print img header
   Magic:       [27051956]
   CRC:         [2b2d8241]
   Image Name:   Linux Kernel Image
   Created:      2012-10-15  19:38:08 UTC

System Control Status = 0x20440000
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    4859264 Bytes =  4.6 MB
   Load Address: 80000000
   Entry Point:  80414000
   Verifying Checksum ... Bad Data CRC
OK
   Uncompressing Kernel Image ...
这是怎么回事大，大神们帮忙分析一下原因。点哪个键都不管用
tftp修复路由器
请千万不要发表任何涉政、涉爆、涉恐、涉军类的内容，只论技术、莫谈政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流。
回复

使用道具 举报

blue***
| 显示全部楼层
中断不及时，你这样路由器的固件已经引导起来了
请千万不要发表任何涉政、涉爆、涉恐、涉军类的内容，只论技术、莫谈政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流。
回复

使用道具 举报

 楼主| | 显示全部楼层
哪里的大原因呀，新手，求指教，如果下步成功了应该怎么把固件刷进去呀
请千万不要发表任何涉政、涉爆、涉恐、涉军类的内容，只论技术、莫谈政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流。
回复

使用道具 举报

| 显示全部楼层
一直重复出现？是不是电源问题？
请千万不要发表任何涉政、涉爆、涉恐、涉军类的内容，只论技术、莫谈政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流。
回复

使用道具 举报

 楼主| | 显示全部楼层
总是这样，换了电源也是，按ctrl+c不管用
请千万不要发表任何涉政、涉爆、涉恐、涉军类的内容，只论技术、莫谈政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流。
回复

使用道具 举报

 楼主| | 显示全部楼层
按2键倒是停止了，也刷进原来的固件了，但是呼由器还是原来的样子呀，没有效果，怎么回事
请千万不要发表任何涉政、涉爆、涉恐、涉军类的内容，只论技术、莫谈政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流。
回复

使用道具 举报

老***
| 显示全部楼层
我刚从RT3052走出来，你咋又进去啦？
是不是也是双u-boot引导，第一次不成功的话，自动引导另外一个？
另外，你确定按2以后刷进去固件了吗？请给出刷进去的TTL信息……
请千万不要发表任何涉政、涉爆、涉恐、涉军类的内容，只论技术、莫谈政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流。
回复

使用道具 举报

 楼主| | 显示全部楼层
U-Boot 1.1.3 (Jan 14 2010 - 20:32:38)

Board: Ralink APSoC DRAM:  64 MB
relocate_code Pointer at: 8377c000

Set info->start[0]=BF000000
flash_protect ON: from 0xBF000000 to 0xBF022F47
protect on 0
protect on 1
protect on 2
flash_protect ON: from 0xBF030000 to 0xBF03FFFF
protect on 3
============================================
Ralink UBoot Version: 3.2
--------------------------------------------
ASIC 3052_MP2 (Port5<->Phy)
DRAM COMPONENT: 256Mbits
DRAM BUS: 32BIT
Total memory: 64 MBytes
Date:Jan 14 2010  Time:20:32:38
============================================
icache: sets:256, ways:4, linesz:32 ,total:32768
dcache: sets:128, ways:4, linesz:32 ,total:16384

##### The CPU freq = 384 MHZ ####

SDRAM bus set to 32 bit
SDRAM size =64 Mbytes

Please choose the operation:
   1: Load system code to SDRAM via TFTP.
   2: Load system code then write to Flash via TFTP.
   3: Boot system code via Flash (default).
   4: Entr boot command line interface.
   9: Load Boot Loader code then write to Flash via TFTP.

You choosed 1

0

eth_register  
Eth0 (10/100-M)
enetvar=ethaddr,Eth addr:00:0C:43:09:26:BB

eth_current->name = Eth0 (10/100-M)

   
1: System Load Linux to SDRAM via TFTP.
Please Input new ones /or Ctrl-C to discard
        Input device IP (192.168.1.1) ==:192.168.1.1         
        Input server IP (192.168.1.15) ==:192.168.1.15
        Input Linux Kernel filename (de.bin) ==:de.bin
File: cmd_net.c, Func: do_tftpb, Line: 52

netboot_common, argc= 3
*************buf = 0x8379f0c0
**********NexTxPacket = 837b7200

NetTxPacket = 0x837B7200

NetRxPackets[0] = 0x837B7800

NetRxPackets[1] = 0x837B7E00

NetRxPackets[2] = 0x837B8400

NetRxPackets[3] = 0x837B8A00

NetRxPackets[4] = 0x837B9000

NetRxPackets[5] = 0x837B9600

NetRxPackets[6] = 0x837B9C00

NetRxPackets[7] = 0x837BA200

NetRxPackets[8] = 0x837BA800

NetRxPackets[9] = 0x837BAE00

NetRxPackets[10] = 0x837BB400

NetRxPackets[11] = 0x837BBA00

NetRxPackets[12] = 0x837BC000

NetRxPackets[13] = 0x837BC600

NetRxPackets[14] = 0x837BCC00

NetRxPackets[15] = 0x837BD200

NetRxPackets[16] = 0x837BD800

NetRxPackets[17] = 0x837BDE00

NetRxPackets[18] = 0x837BE400

NetRxPackets[19] = 0x837BEA00

KSEG1ADDR(NetTxPacket) = 0xA37B7200

NetLoop,call eth_halt !

NetLoop,call eth_init !
Trying Eth0 (10/100-M)

Waitting for RX_DMA_BUSY status Start... done

Header Payload scatter function is Disable !!

ETH_STATE_ACTIVE!!
Using Eth0 (10/100-M) device
TFTP from server 192.168.1.15; our IP address is 192.168.1.1
Filename 'de.bin'.

TIMEOUT_COUNT=10,Load address: 0x80800000
Loading: Got ARP REQUEST, return our IP
test print
192.168.1.1test print NetServerIP
192.168.1.15T Got ARP REQUEST, return our IP
test print
192.168.1.1test print NetServerIP
192.168.1.15T Got ARP REQUEST, return our IP
test print
192.168.1.1test print NetServerIP
192.168.1.15T T Got ARP REPLY, set server/gtwy eth addr (00:e0:1c:3c:08:0b)
Got it
T #
first block received  
################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ##########################################
done
Bytes transferred = 4869381 (4a4d05 hex)
NetBootFileXferSize= 004a4d05
Automatic boot of image at addr 0x80800000 ...
## Booting image at 80800000 ...
sizeof image_header_t is 64
Bad Magic Number,33303532

显示上面的内容
请千万不要发表任何涉政、涉爆、涉恐、涉军类的内容，只论技术、莫谈政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流。
回复

使用道具 举报

| 显示全部楼层
。。。1是把固件刷入  内存   你断电重启就不见了ok？   看提示啊   不懂英语码？   选2  然后刷写固件。。。。。。
请千万不要发表任何涉政、涉爆、涉恐、涉军类的内容，只论技术、莫谈政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流。
回复

使用道具 举报

 楼主| | 显示全部楼层
##### The CPU freq = 384 MHZ ####

SDRAM bus set to 32 bit
SDRAM size =64 Mbytes

Please choose the operation:
   1: Load system code to SDRAM via TFTP.
   2: Load system code then write to Flash via TFTP.
   3: Boot system code via Flash (default).
   4: Entr boot command line interface.
   9: Load Boot Loader code then write to Flash via TFTP.

You choosed 2

0

eth_register  
Eth0 (10/100-M)
enetvar=ethaddr,Eth addr:00:0C:43:09:26:BB

eth_current->name = Eth0 (10/100-M)

   
2: System Load Linux Kernel then write to Flash via TFTP.
Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
Please Input new ones /or Ctrl-C to discard
        Input device IP (192.168.1.1) ==:192.168.1.1
        Input server IP (192.168.1.15) ==:192.168.1.15
        Input Linux Kernel filename (de.bin) ==:de.bin
File: cmd_net.c, Func: do_tftpb, Line: 52

netboot_common, argc= 3
*************buf = 0x8379f0c0
**********NexTxPacket = 837b7200

NetTxPacket = 0x837B7200

NetRxPackets[0] = 0x837B7800

NetRxPackets[1] = 0x837B7E00

NetRxPackets[2] = 0x837B8400

NetRxPackets[3] = 0x837B8A00

NetRxPackets[4] = 0x837B9000

NetRxPackets[5] = 0x837B9600

NetRxPackets[6] = 0x837B9C00

NetRxPackets[7] = 0x837BA200

NetRxPackets[8] = 0x837BA800

NetRxPackets[9] = 0x837BAE00

NetRxPackets[10] = 0x837BB400

NetRxPackets[11] = 0x837BBA00

NetRxPackets[12] = 0x837BC000

NetRxPackets[13] = 0x837BC600

NetRxPackets[14] = 0x837BCC00

NetRxPackets[15] = 0x837BD200

NetRxPackets[16] = 0x837BD800

NetRxPackets[17] = 0x837BDE00

NetRxPackets[18] = 0x837BE400

NetRxPackets[19] = 0x837BEA00

KSEG1ADDR(NetTxPacket) = 0xA37B7200

NetLoop,call eth_halt !

NetLoop,call eth_init !
Trying Eth0 (10/100-M)

Waitting for RX_DMA_BUSY status Start... done

Header Payload scatter function is Disable !!

ETH_STATE_ACTIVE!!
Using Eth0 (10/100-M) device
TFTP from server 192.168.1.15; our IP address is 192.168.1.1
Filename 'de.bin'.

TIMEOUT_COUNT=10,Load address: 0x80100000
Loading: Got ARP REPLY, set server/gtwy eth addr (00:e0:1c:3c:08:0b)
Got it
T T T T T #
first block received  
################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ##########################################
done
Bytes transferred = 4869381 (4a4d05 hex)
NetBootFileXferSize= 004a4d05
Erase linux kernel block !!
From 0xBF050000 To 0xBF4FFFFF

b_end =BF7FFFFF
Erase Flash from 0xbf050000 to 0xbf4fffff in Bank # 1

erase sector  = 5
sect = 5,s_last = 79,erase poll = 671899

erase sector  = 6
sect = 6,s_last = 79,erase poll = 630906

erase sector  = 7
sect = 7,s_last = 79,erase poll = 673571

erase sector  = 8
*sect = 8,s_last = 79,erase poll = 668898

erase sector  = 9
sect = 9,s_last = 79,erase poll = 679365

erase sector  = 10
sect = 10,s_last = 79,erase poll = 619201

erase sector  = 11
*sect = 11,s_last = 79,erase poll = 658111

erase sector  = 12
sect = 12,s_last = 79,erase poll = 691353

erase sector  = 13
sect = 13,s_last = 79,erase poll = 663032

erase sector  = 14
*sect = 14,s_last = 79,erase poll = 680864

erase sector  = 15
sect = 15,s_last = 79,erase poll = 640987

erase sector  = 16
sect = 16,s_last = 79,erase poll = 670162

erase sector  = 17
*sect = 17,s_last = 79,erase poll = 775519

erase sector  = 18
sect = 18,s_last = 79,erase poll = 684776

erase sector  = 19
sect = 19,s_last = 79,erase poll = 755628

erase sector  = 20
*sect = 20,s_last = 79,erase poll = 705447

erase sector  = 21
sect = 21,s_last = 79,erase poll = 685937

erase sector  = 22
sect = 22,s_last = 79,erase poll = 658661

erase sector  = 23
*sect = 23,s_last = 79,erase poll = 626771

erase sector  = 24
sect = 24,s_last = 79,erase poll = 651595

erase sector  = 25
sect = 25,s_last = 79,erase poll = 715427

erase sector  = 26
*sect = 26,s_last = 79,erase poll = 640383

erase sector  = 27
sect = 27,s_last = 79,erase poll = 654752

erase sector  = 28
sect = 28,s_last = 79,erase poll = 662187

erase sector  = 29
*sect = 29,s_last = 79,erase poll = 646847

erase sector  = 30
sect = 30,s_last = 79,erase poll = 649210

erase sector  = 31
sect = 31,s_last = 79,erase poll = 632066

erase sector  = 32
*sect = 32,s_last = 79,erase poll = 651895

erase sector  = 33
sect = 33,s_last = 79,erase poll = 661605

erase sector  = 34
sect = 34,s_last = 79,erase poll = 630380

erase sector  = 35
*sect = 35,s_last = 79,erase poll = 705324

erase sector  = 36
sect = 36,s_last = 79,erase poll = 620424

erase sector  = 37
sect = 37,s_last = 79,erase poll = 698871

erase sector  = 38
*sect = 38,s_last = 79,erase poll = 686102

erase sector  = 39
sect = 39,s_last = 79,erase poll = 642022

erase sector  = 40
sect = 40,s_last = 79,erase poll = 639929

erase sector  = 41
*sect = 41,s_last = 79,erase poll = 665161

erase sector  = 42
sect = 42,s_last = 79,erase poll = 706672

erase sector  = 43
sect = 43,s_last = 79,erase poll = 661595

erase sector  = 44
*sect = 44,s_last = 79,erase poll = 668159

erase sector  = 45
sect = 45,s_last = 79,erase poll = 666894

erase sector  = 46
sect = 46,s_last = 79,erase poll = 687625

erase sector  = 47
sect = 47,s_last = 79,erase poll = 610461

erase sector  = 48
*sect = 48,s_last = 79,erase poll = 660532

erase sector  = 49
sect = 49,s_last = 79,erase poll = 653476

erase sector  = 50
sect = 50,s_last = 79,erase poll = 615078

erase sector  = 51
*sect = 51,s_last = 79,erase poll = 633333

erase sector  = 52
sect = 52,s_last = 79,erase poll = 665236

erase sector  = 53
sect = 53,s_last = 79,erase poll = 863720

erase sector  = 54
*sect = 54,s_last = 79,erase poll = 896730

erase sector  = 55
sect = 55,s_last = 79,erase poll = 856000

erase sector  = 56
*sect = 56,s_last = 79,erase poll = 801070

erase sector  = 57
sect = 57,s_last = 79,erase poll = 979549

erase sector  = 58
*sect = 58,s_last = 79,erase poll = 856612

erase sector  = 59
sect = 59,s_last = 79,erase poll = 983666

erase sector  = 60
*sect = 60,s_last = 79,erase poll = 931530

erase sector  = 61
sect = 61,s_last = 79,erase poll = 1020307

erase sector  = 62
sect = 62,s_last = 79,erase poll = 838733

erase sector  = 63
*sect = 63,s_last = 79,erase poll = 857269

erase sector  = 64
sect = 64,s_last = 79,erase poll = 687278

erase sector  = 65
*sect = 65,s_last = 79,erase poll = 680472

erase sector  = 66
sect = 66,s_last = 79,erase poll = 647844

erase sector  = 67
sect = 67,s_last = 79,erase poll = 699034

erase sector  = 68
sect = 68,s_last = 79,erase poll = 683889
.
erase sector  = 69
sect = 69,s_last = 79,erase poll = 643752

erase sector  = 70
sect = 70,s_last = 79,erase poll = 686633

erase sector  = 71
sect = 71,s_last = 79,erase poll = 654747

erase sector  = 72
*sect = 72,s_last = 79,erase poll = 673678

erase sector  = 73
sect = 73,s_last = 79,erase poll = 681745

erase sector  = 74
sect = 74,s_last = 79,erase poll = 670204

erase sector  = 75
*sect = 75,s_last = 79,erase poll = 645408

erase sector  = 76
sect = 76,s_last = 79,erase poll = 684567

erase sector  = 77
sect = 77,s_last = 79,erase poll = 719059

erase sector  = 78
*sect = 78,s_last = 79,erase poll = 697150

erase sector  = 79
sect = 79,s_last = 79,erase poll = 759580
done
Erased 75 sectors
do_memt cp
add_hsize is 0

Copy linux image[4869381 byte] to Flash[0xBF050000]....
Copy to Flash...
Copy 4869381 byte to Flash... flash write chk: addr(80100000), dest(bf050000), count(4a4d05), size(1)

addr = 0xBF0806C8 ,cnt=4671037
addr = 0xBF0B1970 ,cnt=4469653
addr = 0xBF0E25CE ,cnt=4269879
addr = 0xBF112E48 ,cnt=4071101
addr = 0xBF140EDC ,cnt=3882537
addr = 0xBF1705B2 ,cnt=3688275
addr = 0xBF1A02E4 ,cnt=3492385
addr = 0xBF1D03BA ,cnt=3295563
addr = 0xBF20053E ,cnt=3098567
addr = 0xBF22F354 ,cnt=2906545
addr = 0xBF25D96E ,cnt=2716567
addr = 0xBF28C4C8 ,cnt=2525245
addr = 0xBF2BAB6A ,cnt=2335131
addr = 0xBF2E998E ,cnt=2143095
addr = 0xBF3187BC ,cnt=1951049
addr = 0xBF34748A ,cnt=1759355
addr = 0xBF376762 ,cnt=1566115
addr = 0xBF3A66CA ,cnt=1369659
addr = 0xBF3D637C ,cnt=1173897
addr = 0xBF405B2C ,cnt=979417
addr = 0xBF433FBE ,cnt=789831
addr = 0xBF462078 ,cnt=601229
addr = 0xBF4906B6 ,cnt=411215
addr = 0xBF4BEB8C ,cnt=221561
addr = 0xBF4ED542 ,cnt=30659 done
## Booting image at bf050000 ...
sizeof image_header_t is 64
Bad Magic Number,33303532


U-Boot 1.1.3 (Jan 14 2010 - 20:32:38)

Board: Ralink APSoC DRAM:  64 MB
relocate_code Pointer at: 8377c000

Set info->start[0]=BF000000
flash_protect ON: from 0xBF000000 to 0xBF022F47
protect on 0
protect on 1
protect on 2
flash_protect ON: from 0xBF030000 to 0xBF03FFFF
protect on 3
============================================
Ralink UBoot Version: 3.2
--------------------------------------------
ASIC 3052_MP2 (Port5<->Phy)
DRAM COMPONENT: 256Mbits
DRAM BUS: 32BIT
Total memory: 64 MBytes
Date:Jan 14 2010  Time:20:32:38
============================================
icache: sets:256, ways:4, linesz:32 ,total:32768
dcache: sets:128, ways:4, linesz:32 ,total:16384

##### The CPU freq = 384 MHZ ####

SDRAM bus set to 32 bit
SDRAM size =64 Mbytes

Please choose the operation:
   1: Load system code to SDRAM via TFTP.
   2: Load system code then write to Flash via TFTP.
   3: Boot system code via Flash (default).
   4: Entr boot command line interface.
   9: Load Boot Loader code then write to Flash via TFTP.
0
   
3: System Boot system code via Flash.

eth_register  
Eth0 (10/100-M)
enetvar=ethaddr,Eth addr:00:0C:43:09:26:BB

eth_current->name = Eth0 (10/100-M)

verify is 1
## load addr bf050000 ...
print img header
   Magic:       [00000000]
   CRC:         [00000000]
   Image Name:   
   Created:      1970-01-01   0:00:00 UTC

System Control Status = 0x20440000
   Image Type:   Invalid CPU Invalid OS Invalid Image (uncompressed)
   Data Size:    0 Bytes =  0 kB
   Load Address: 00000000
   Entry Point:  00000000
Bad Magic Number , 00000000
## Booting image at bf050000 ...
sizeof image_header_t is 64
Bad Magic Number,33303532
选2刷完后变成这样了
请千万不要发表任何涉政、涉爆、涉恐、涉军类的内容，只论技术、莫谈政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流。
回复

使用道具 举报

 楼主| | 显示全部楼层
现在插上TTL线后没反应了，是TTL线坏了还是彻底变砖了？
请千万不要发表任何涉政、涉爆、涉恐、涉军类的内容，只论技术、莫谈政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流。
回复

使用道具 举报

wiza***
| 显示全部楼层
可以远程指导,QQ：544950192
请千万不要发表任何涉政、涉爆、涉恐、涉军类的内容，只论技术、莫谈政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流。
回复

使用道具 举报

 楼主| | 显示全部楼层
已经加Q了

请千万不要发表任何涉政、涉爆、涉恐、涉军类的内容，只论技术、莫谈政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流。
回复

使用道具 举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

欢迎大家光临恩山无线论坛上一条 /1 下一条

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-5-11 08:35

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱：js12377 | @jischina.com.cn 举报电话：025-88802724 本站不良内容举报信箱：68610888@qq.com 举报电话：0519-86695797

快速回复 返回顶部 返回列表