|
|
U-Boot 1.1.4-g5e4af5a2 (Sep 17 2014 - 17:29:36)
ap151 - Dragonfly 1.0
DRAM: 128 MB
Top of RAM usable for U-Boot at: 88000000
Reserving 135k for U-Boot at: 87fdc000
Reserving 192k for malloc() at: 87fac000
Reserving 44 Bytes for Board Info at: 87fabfd4
Reserving 36 Bytes for Global Data at: 87fabfb0
Reserving 128k for boot params() at: 87f8bfb0
Stack Pointer at: 87f8bf98
Now running in RAM - U-Boot at: 87fdc000
Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x17
flash size 8MB, sector count = 128
Flash: 8 MB
Using default environment
In: serial
Out: serial
Err: serial
Net: ath_gmac_enet_initialize...
No valid address in Flash. Using fixed address
No valid address in Flash. Using fixed address
ath_gmac_enet_initialize: reset mask:c02200
Dragonfly----> S27 PHY *
: cfg1 0x80000000 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
athrs27_phy_setup ATHR_PHY_CONTROL 4 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 4 :10
eth0 up
ATHRS27: resetting s27
ATHRS27: s27 reset done
: cfg1 0x800c0000 cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
athrs27_phy_setup ATHR_PHY_CONTROL 0 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 0 :10
athrs27_phy_setup ATHR_PHY_CONTROL 1 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 1 :10
athrs27_phy_setup ATHR_PHY_CONTROL 2 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 2 :10
athrs27_phy_setup ATHR_PHY_CONTROL 3 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 3 :10
eth1 up
eth0, eth1
Setting 0x181162c0 to 0x82
Hit any key to stop autoboot: 0
## Booting image at 9f010200 ...
Image Name: Linux Kernel Image
Created: 2014-09-17 9:29:29 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 996298 Bytes = 972.9 kB
Load Address: 80002000
Entry Point: 8020ed90
Verifying Checksum at 0x9f010240 ...OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 8020ed90) ...
## Giving linux memsize in bytes, 134217728
Starting kernel ...
Booting QCA956x
[ 0.000000] Linux version 2.6.31--LSDK- (jenkins@build-server) (gcc version 4.3.3 (GCC) ) #1 Wed Sep 17 17:28:37 CST 2014
[ 0.000000] flash_size passed from bootloader = 8
[ 0.000000] arg 1: console=ttyS0,115200
[ 0.000000] arg 2: root=31:03
[ 0.000000] arg 3: rootfstype=squashfs
[ 0.000000] arg 4: init=/sbin/init
[ 0.000000] arg 5: mtdparts=ath-nor0:32k(u-boot),32k(u-boot-env),1024k(uImage),6976k(rootfs),64k(mib0),64k(ART)
[ 0.000000] arg 6: mem=128M
[ 0.000000] CPU revision is: 00019750 (MIPS 74Kc)
[ 0.000000] ath_sys_frequency: cpu 775 ddr 650 ahb 258
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] User-defined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00008000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00008000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 root=31:03 rootfstype=squashfs init=/sbin/init mtdparts=ath-nor0:32k(u-boot),32k(u-boot-env),1024k(uImage),6976k(rootfs),64k(mib0),64k(ART) mem=128M
[ 0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 112512k/131072k available (2117k kernel code, 18392k reserved, 520k data, 160k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] plat_time_init: plat time init done
[ 0.000000] r4k_clockevent_init: Ignoring int_usable failure
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] Calibrating delay loop... 387.07 BogoMIPS (lpj=774144)
[ 0.080000] Mount-cache hash table entries: 512
[ 0.080000]
[ 0.080000] ****************ALLOC***********************
[ 0.080000] Packet mem: 802d0400 (0xe00000 bytes)
[ 0.080000] ********************************************
[ 0.080000]
[ 0.080000] NET: Registered protocol family 16
[ 0.080000] ath_pcibios_init: bus 0
[ 0.080000] ath_pcibios_init(255): PCI 0 CMD write: 0x356
[ 0.080000] registering PCI controller with io_map_base unset
[ 0.080000] bio: create slab <bio-0> at 0
[ 0.080000] SCSI subsystem initialized
[ 0.080000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.080000] pci 0000:00:00.0: PME# disabled
[ 0.080000] pcibios_map_irq: IRQ 76 for bus 0
[ 0.080000] NET: Registered protocol family 2
[ 0.080000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.080000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.080000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.080000] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.084000] TCP reno registered
[ 0.084000] NET: Registered protocol family 1
[ 0.084000] ATH GPIOC major 0
[ 0.084000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.084000] JFFS2 version 2.2 (NAND) (ZLIB) (RTIME) (c) 2001-2006 Red Hat, Inc.
[ 0.084000] fuse init (API version 7.12)
[ 0.084000] msgmni has been set to 220
[ 0.084000] io scheduler noop registered
[ 0.084000] io scheduler deadline registered (default)
[ 0.088000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.088000] serial8250.0: ttyS0 at MMIO 0xb8020000 (irq = 19) is a 16550A
[ 0.088000] console [ttyS0] enabled
[ 0.448000] brd: module loaded
[ 0.452000] PPP generic driver version 2.4.2
[ 0.456000] NET: Registered protocol family 24
[ 0.460000] 6 cmdlinepart partitions found on MTD device ath-nor0
[ 0.468000] Creating 6 MTD partitions on "ath-nor0":
[ 0.472000] 0x000000000000-0x000000008000 : "u-boot"
[ 0.480000] mtd: partition "u-boot" doesn't end on an erase block -- force read-only
[ 0.488000] 0x000000008000-0x000000010000 : "u-boot-env"
[ 0.492000] mtd: partition "u-boot-env" doesn't start on an erase block boundary -- force read-only
[ 0.500000] 0x000000010000-0x000000110000 : "uImage"
[ 0.508000] 0x000000110000-0x0000007e0000 : "rootfs"
[ 0.512000] 0x0000007e0000-0x0000007f0000 : "mib0"
[ 0.516000] 0x0000007f0000-0x000000800000 : "ART"
[ 0.524000] ->Oops: flash id 0xef4017 .
[ 0.528000] ----TP IGMP has been init------
[ 0.532000] TCP cubic registered
[ 0.536000] NET: Registered protocol family 10
[ 0.540000] NET: Registered protocol family 17
[ 0.544000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 0.552000] All bugs added by David S. Miller <davem@redhat.com>
[ 0.556000] athwdt_init: Registering WDT success
[ 0.568000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[ 0.576000] Freeing unused kernel memory: 160k freed
init started: BusyBox v1.21.1 (2014-09-17 17:32:50 CST)
[ 1.316000] usbcore: registered new interface driver usbfs
[ 1.324000] usbcore: registered new interface driver hub
[ 1.328000] usbcore: registered new device driver usb
[ 1.396000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.404000] Port Status 1c000004
[ 1.404000] ath-ehci ath-ehci.0: ATH EHCI
[ 1.408000] ath-ehci ath-ehci.0: new USB bus registered, assigned bus number 1
[ 1.420000] ehci_reset Intialize USB CONTROLLER in host mode: 13
[ 1.424000] ehci_reset Port Status 1c000000
[ 1.428000] ath-ehci ath-ehci.0: irq 3, io mem 0x1b000000
[ 1.436000] ehci_reset Intialize USB CONTROLLER in host mode: 13
[ 1.444000] ehci_reset Port Status 1c000000
[ 1.460000] ath-ehci ath-ehci.0: USB 2.0 started, EHCI 1.00
[ 1.464000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.472000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.480000] usb usb1: Product: ATH EHCI
[ 1.484000] usb usb1: Manufacturer: Linux 2.6.31--LSDK- ehci_hcd
[ 1.488000] usb usb1: SerialNumber: platform
[ 1.492000] usb usb1: configuration #1 chosen from 1 choice
[ 1.500000] hub 1-0:1.0: USB hub found
[ 1.504000] hub 1-0:1.0: 1 port detected
[ 1.508000] Port Status 1c000000
[ 1.512000] ath-ehci1 ath-ehci1.1: ATH EHCI
[ 1.516000] ath-ehci1 ath-ehci1.1: new USB bus registered, assigned bus number 2
[ 1.524000] ehci_reset Intialize USB CONTROLLER in host mode: 13
[ 1.532000] ehci_reset Port Status 1c000000
[ 1.536000] ath-ehci1 ath-ehci1.1: irq 3, io mem 0x1b400000
[ 1.544000] ehci_reset Intialize USB CONTROLLER in host mode: 13
[ 1.552000] ehci_reset Port Status 1c000000
[ 1.568000] ath-ehci1 ath-ehci1.1: USB 2.0 started, EHCI 1.00
[ 1.572000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.580000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.588000] usb usb2: Product: ATH EHCI
[ 1.592000] usb usb2: Manufacturer: Linux 2.6.31--LSDK- ehci_hcd
[ 1.596000] usb usb2: SerialNumber: platform
[ 1.604000] usb usb2: configuration #1 chosen from 1 choice
[ 1.608000] hub 2-0:1.0: USB hub found
[ 1.612000] hub 2-0:1.0: 1 port detected
[ 1.676000] Initializing USB Mass Storage driver...
[ 1.680000] usbcore: registered new interface driver usb-storage
[ 1.688000] USB Mass Storage support registered.
[ 1.760000] usbcore: registered new interface driver cdc_ether
This Board use 2.6.31
[ 1.876000] xt_time: kernel timezone is -0000
[ 1.996000] nf_conntrack version 0.5.0 (2048 buckets, 32768 max)
[ 2.256000] ip_tables: (C) 2000-2006 Netfilter Core Team
insmod: can't insert '/lib/modules/2.6.31/kernel/iptable_raw.ko': No such file or directory
insmod: can't insert '/lib/modules/2.6.31/kernel/flashid.ko': No such file or directory
insmod: can't insert '/lib/modules/2.6.31/kernel/br_filter.ko': No such file or directory
[ 2.464000] PPPoL2TP kernel driver, V1.0
[ 2.500000] PPTP driver version 0.8.3
insmod: can't insert '/lib/modules/2.6.31/kernel/harmony.ko': No such file or directory
(none) mips #1 Wed Sep 17 17:28:37 CST 2014 (none)
(none) login: [ 3.128000] Now flash open!
[ 3.284000] qca956x_GMAC: Length per segment 1536
[ 3.288000] 956x_GMAC: qca956x_gmac_attach
[ 3.292000] 956x_GMAC: qca956x_set_gmac_caps
[ 3.296000] GPIO LED SETTINGS ....done
[ 3.300000] Currently in interrupt mode unit1
[ 3.304000] qca956x_set_gmac_caps CHECK DMA STATUS
[ 3.312000] mac:1 Registering S27....
[ 3.316000] qca956x_GMAC: RX TASKLET - Pkts per Intr:32
[ 3.320000] qca956x_GMAC: Mac address for unit 1:bfff0006
[ 3.324000] qca956x_GMAC: ff:ff:ff:ff:ff:ff
[ 3.332000] qca956x_GMAC: Max segments per packet : 1
[ 3.336000] qca956x_GMAC: Max tx descriptor count : 128
[ 3.340000] qca956x_GMAC: Max rx descriptor count : 128
[ 3.348000] qca956x_GMAC: Mac capability flags : 2401
[ 3.352000] 956x_GMAC: qca956x_gmac_attach
[ 3.356000] 956x_GMAC: qca956x_set_gmac_caps
[ 3.360000] Currently in interrupt mode unit0
[ 3.364000] qca956x_set_gmac_caps CHECK DMA STATUS
[ 3.372000] mac:0 Registering S27....
[ 3.376000] qca956x_GMAC: RX TASKLET - Pkts per Intr:32
[ 3.380000] qca956x_GMAC: Mac address for unit 0:bfff0000
[ 3.384000] qca956x_GMAC: ff:ff:ff:ff:ff:ff
[ 3.392000] qca956x_GMAC: Max segments per packet : 1
[ 3.396000] qca956x_GMAC: Max tx descriptor count : 128
[ 3.400000] qca956x_GMAC: Max rx descriptor count : 128
[ 3.408000] qca956x_GMAC: Mac capability flags : 2401
[ 4.020000] athr_gmac_ring_alloc Allocated 2048 at 0x87b3a800
[ 4.028000] sram_desc_cnt 1536,mac Unit 0,Tx r->ring_desc 0xbd000000
[ 4.036000] athr_gmac_ring_alloc Allocated 2048 at 0x87b3a000
[ 4.040000] sram_desc_cnt 3072,mac Unit 0,Rx r->ring_desc 0xbd000600
[ 4.348000] 956x_GMAC: eth0 in MII MODE
[ 4.352000] Dragonfly -----> S27 PHY
[ 4.356000] Setting Drop CRC Errors, Pause Frames and Length Error frames
[ 4.372000] Setting PHY...
[ 4.696000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 4.708000] athr_gmac_ring_alloc Allocated 2048 at 0x87b3b800
[ 4.716000] sram_desc_cnt 4608,mac Unit 1,Tx r->ring_desc 0xbd000c00
[ 4.720000] athr_gmac_ring_alloc Allocated 2048 at 0x87b3b000
[ 4.728000] sram_desc_cnt 6144,mac Unit 1,Rx r->ring_desc 0xbd001200
[ 5.032000] 956x_GMAC: eth1 in RGMII MODE
[ 5.036000] Dragonfly -----> S27 PHY
[ 5.040000] ATHRS27: resetting s27
[ 5.144000] ATHRS27: s27 reset done
[ 5.160000] ++++ athrs27_igmp_setup once
[ 5.172000] Setting Drop CRC Errors, Pause Frames and Length Error frames
[ 5.188000] Setting PHY...
[ 5.316000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.336000] device eth0 entered promiscuous mode
[ 5.348000] Now flash open!
[ 5.356000] athr_gmac_ring_free Freeing at 0x87b3a800
[ 5.356000] athr_gmac_ring_free Freeing at 0x87b3a000
[ 5.380000] athr_gmac_ring_alloc Allocated 2048 at 0x87b3a000
[ 5.388000] sram_desc_cnt 6144,mac Unit 0,Tx r->ring_desc 0xbd000000
[ 5.396000] athr_gmac_ring_alloc Allocated 2048 at 0x87b3a800
[ 5.400000] sram_desc_cnt 6144,mac Unit 0,Rx r->ring_desc 0xbd000600
[ 5.708000] 956x_GMAC: eth0 in MII MODE
[ 5.712000] Dragonfly -----> S27 PHY
[ 5.716000] Setting Drop CRC Errors, Pause Frames and Length Error frames
[ 5.732000] Setting PHY...
[ 6.056000] ADDRCONF(NETDEV_UP): eth1: link is not ready
route: SIOCADDRT: Invalid argument
[ 6.072000] athr_gmac_ring_free Freeing at 0x87b3b800
[ 6.072000] athr_gmac_ring_free Freeing at 0x87b3b000
[ 6.100000] athr_gmac_ring_alloc Allocated 2048 at 0x87b3b000
[ 6.104000] sram_desc_cnt 6144,mac Unit 1,Tx r->ring_desc 0xbd000c00
[ 6.112000] athr_gmac_ring_alloc Allocated 2048 at 0x87b3b800
[ 6.120000] sram_desc_cnt 6144,mac Unit 1,Rx r->ring_desc 0xbd001200
[ 6.424000] 956x_GMAC: eth1 in RGMII MODE
[ 6.428000] Dragonfly -----> S27 PHY
[ 6.432000] Setting Drop CRC Errors, Pause Frames and Length Error frames
[ 6.452000] Setting PHY...
[ 6.576000] ADDRCONF(NETDEV_UP): eth0: link is not ready
route: SIOCADDRT: Invalid argument
<wlanWarn> Weak
wlanWarn check
rmmod: can't unload 'tp_domain': unknown symbol in module, or unknown parameter
info, udhcpc (v0.9.9-pre) started
info, udhcpd (v0.9.9-pre) started
insmod: can't insert '/lib/modules/2.6.31/kernel/nf_conntrack_proto_gre.ko': File exists
insmod: can't insert '/lib/modules/2.6.31/kernel/nf_nat_h323.ko': File exists
[ 7.644000] nf_conntrack_rtsp v0.6.21 loading
[ 7.660000] nf_nat_rtsp v0.6.21 loading
02020003
35377075
[ 7.764000] adf: module license 'Proprietary' taints kernel.
[ 7.768000] Disabling lock debugging due to kernel taint
[ 8.188000] ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, WRITE_EEPROM, TX_DATA_SWAP, RX_DATA_SWAP, 11D)
[ 8.252000] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
[ 8.320000] ath_dfs: Version 2.0.0
[ 8.320000] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
[ 8.344000] ath_tx99: Version 2.0
[ 8.344000] Copyright (c) 2010 Atheros Communications, Inc, All Rights Reserved
[ 8.608000] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
[ 10.088000] ath_ahb: (Atheros/multi-bss)
[ 10.096000] __ath_attach: Set global_scn[0]
[ 10.108000] Enterprise mode: 0x03bda000
[ 10.112000] Restoring Cal data from Flash
[ 10.120000] Green-AP : Green-AP : Attached
[ 10.120000]
[ 10.128000] ath_get_caps[6128] rx chainmask mismatch actual 7 sc_chainmak 0
[ 10.136000] ath_get_caps[6103] tx chainmask mismatch actual 7 sc_chainmak 0
[ 10.148000] ath_attach_dfs[12518] dfsdomain 1
[ 10.172000] SC Callback Registration for wifi0
[ 10.176000] wifi0: Atheros 956X: mem=0xb8100000, irq=2
[ 10.180000] ath_pci: (Atheros/multi-bss)
[ 10.184000] ath_pci_probe
[ 10.188000] PCI device id is 003c :003c
[ 10.196000] ath_pci 0000:00:00.0: ath DEBUG: sc=0x86f02e00
[ 10.200000]
[ 10.200000] ol_ath_pci_configure : num_desired MSI set to 0
[ 10.208000]
[ 10.208000] Using PCI Legacy Interrupt
[ 10.620000] __ol_ath_attach: ath_attach TODO
[ 10.628000] __ol_ath_attach: dev name wifi1
[ 10.632000] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
[ 10.640000] OL_ACBKMinfree : 0
[ 10.644000] OL_ACBEMinfree : 0
[ 10.648000] OL_ACVIMinfree : 0
[ 10.652000] OL_ACVOMinfree : 0
[ 10.652000] ol_ath_attach() BMI inited.
[ 10.660000] ol_ath_attach() BMI Get Target Info.
[ 10.664000] ol_ath_attach() TARGET TYPE: 7 Vers 0x4100016c
[ 10.668000] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
[ 10.676000] ol_ath_attach() configure Target .
[ 10.680000] qc98xx_verify_checksum: flash checksum passed: 0xbc88
[ 10.688000] ol_transfer_bin_file 1836: Download Flash data len 2116
[ 10.708000] ol_transfer_bin_file 1783: Download Firmware data len 214312
[ 11.628000] ol_ath_attach() Download FW.
[ 11.632000] ol_ath_attach() HT Create .
[ 11.636000] ol_ath_attach() HIF Claim.
[ 11.640000] ol_ath_attach() BMI Done.
[ 11.644000] ol_ath_attach() WMI attached. wmi_handle 86e00000
[ 11.648000] +HWT
[ 11.656000] CE_recv_buf_enqueue 644 Populate last entry 512 for CE 5
[ 11.660000] CE_recv_buf_enqueue 653 CE 5 wi 511 dest_ptr 0x6a9420 nbytes 0 recv_ctxt 0x86e4bda0
[ 11.672000] -HWT
[ 11.672000] HTC Service:0x0300 ep:1 TX flow control disabled
[ 11.680000] CE_pkt_dl_len_set CE 4 Pkt download length 64
[ 11.688000] HTC Service:0x0100 ep:2 TX flow control disabled
[ 11.696000] wmi_service_ready_event_rx: WMI UNIFIED SERVICE READY event
[ 11.700000] num_rf_chain : 00000002
[ 11.704000] ht_cap_info: : 0000085b
[ 11.708000] vht_cap_info : 338001b2
[ 11.712000] vht_supp_mcs : 0000fffa
[ 11.724000] FIRMWARE 49 V 16 T 155
[ 11.724000]
[ 11.732000] FIRMWARE:_wlan_rtt_enable
[ 11.736000] wmi_ready_event_rx: WMI UNIFIED READY event
[ 11.740000] ol_ath_connect_htc() WMI is ready
[ 11.744000] ol_ath_set_host_app_area TODO
[ 11.748000] target uses HTT version 2.1; host uses 2.1
[ 11.760000] ol_ath_attach() connect HTC.
[ 11.764000] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
[ 11.776000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
[ 11.784000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
[ 11.792000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0
[ 11.796000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
[ 11.804000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150
[ 11.812000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080
[ 11.820000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080
[ 11.828000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080
[ 11.836000] Add VHT80 channel: 5210
[ 11.840000] Add VHT80 channel: 5290
[ 11.844000] Add VHT80 channel: 5530
[ 11.844000] Add VHT80 channel: 5610
[ 11.848000] Add VHT80 channel: 5690
[ 11.852000] Add VHT80 channel: 5775
[ 11.856000] Skipping VHT80 channel 5825
[ 11.860000] ol_ath_phyerr_attach: called
[ 11.864000] OL Resmgr Init-ed
[ 11.868000] Green-AP : Green-AP : Attached
[ 11.868000]
[ 11.876000] Green-AP : Attached
[ 11.880000] ol_if_dfs_setup: called
[ 11.884000] ol_if_dfs_attach: called; ptr=86e9d974, radar_info=87b97c08
[ 11.892000] ol_ath_rtt_meas_report_attach: called
[ 11.896000] ol_ath_attach() UMAC attach .
[ 11.904000] ol_if_dfs_configure: called
[ 11.908000] ol_if_dfs_configure: FCC domain
[ 11.912000] ol_if_dfs_disable: called
[ 11.916000] ol_ath_attach: Calling ol_if_dfs_configure
[ 11.920000] __ol_ath_attach: init tx/rx TODO
[ 11.924000] __ol_ath_attach: hard_header_len reservation 58
[ 11.932000] SC Callback Registration for wifi1
[ 11.980000] ath_attach_dfs[12518] dfsdomain 1
[ 12.048000] VAP device ath0 created
ath0
Interface doesn't accept private ioctl...
ForBiasAuto (8BE0): Operation not permitted
[ 12.128000]
[ 12.128000] DES SSID SET=TP-LINK_XXXX
[ 12.144000] ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1
[ 12.644000] FWLOG: [16123] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x460, 0x460, 0x0 )
[ 12.652000] FWLOG: [16123] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x460, 0x460, 0x0 )
[ 12.660000] FWLOG: [16123] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x460, 0x460, 0x0 )
[ 12.668000] FWLOG: [16123] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x460, 0x460, 0x0 )
Interface doesn't accept private ioctl...
ForBiasAuto (8BE0): Operation not permitted
[ 17.512000] ieee80211_ioctl_siwmode: imr.ifm_active=918144, new mode=3, valid=1
00000000Local port:1900.
Handle Index:1.
IGD: adding support to WFADevice
[ 19.096000] Scan in progress.. Cancelling it
[ 19.884000] device ath0 entered promiscuous mode
[ 19.888000] br0: port 2(ath0) entering forwarding state
Configuration file: /tmp/topology_ath0.conf
[ 20.280000] ieee80211_ioctl_siwmode: imr.ifm_active=393856, new mode=3, valid=1
[ 20.288000] Scan in progress.. Cancelling it
[ 20.360000] br0: port 2(ath0) entering disabled state
[ 20.368000] DEVICE IS DOWN ifname=ath0
ath0: Could not [ 20.372000] DEVICE IS DOWN ifname=ath0
connect to kernel driver
Using interface ath0 with hwaddr ec:26:ca:xx:xx:xx and ssid 'TP-LINK_XXXX'
[ 20.528000] br0: port 2(ath0) entering forwarding state
<wlanWarn> Weak
<wlanWarn>5g Weak
<wlanWarn> 2g/5g wlan warn actived
<wlanWarn> on
<wlanWarn> wlanWarn call
440888bc
99990900
[ 22.004000] isCountryCodeValid: EEPROM regdomain 0x0
[ 22.012000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
[ 22.020000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
[ 22.024000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0
[ 22.032000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
[ 22.040000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150
[ 22.048000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080
[ 22.056000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080
[ 22.064000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080
[ 22.068000] Add VHT80 channel: 5775
[ 22.072000] Skipping VHT80 channel 5825
ifconfig: SIOCSIFTXQLEN: No such device
[ 22.116000] ath_ioctl: SIOC80211IFCREATE CALLED
[ 22.120000] wmi_unified_vdev_create_send: ID = 0 VAP Addr = ec:26:ca:xx:xx:xx:
[ 22.128000] VAP device ath1 created
ath1
[ 22.168000]
[ 22.168000] DES SSID SET=TP-LINK_5G_XXXX
[ 22.184000] ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1
[ 22.192000] OL vap_stop +
[ 22.192000] wmi_unified_vdev_stop_send
[ 22.196000] OL vap_stop -
[ 22.200000] STOPPED EVENT for vap 0
[ 22.212000] ol_ath_desc_alloc_and_mark_for_mcast_clone: VAP Mcast to Unicast buffer allocated: 400
[ 22.220000] ol_ath_vap_set_param: VAP param is now supported param:65 value:2
[ 22.244000] OL vap_stop +
[ 22.248000] wmi_unified_vdev_stop_send
[ 22.252000] OL vap_stop -
[ 22.252000] STOPPED EVENT for vap 0
[ 22.264000] OL vap_stop +
[ 22.268000] wmi_unified_vdev_stop_send
[ 22.272000] OL vap_stop -
[ 22.276000] STOPPED EVENT for vap 0
[ 22.644000] FWLOG: [26646] WHAL_ERROR_RECV_STOPPCU ( 0x110298a, 0x3 )
[ 22.648000] FWLOG: [26646] WHAL_ERROR_RESET_PM ( )
[ 23.220000] mlme_create_infra_bss : Overriding HT40 channel with HT20 channel
[ 23.908000] OL vap_start +
[ 23.912000] OL vap_start -
[ 23.920000] ol_vdev_start_resp_ev
[ 23.920000] ol_ath_vap_join: join operation is only for STA/IBSS mode
[ 23.928000] ol_ath_wmm_update:
[ 23.932000] Notification to UMAC VAP layer
[ 27.416000] wmi_unified_vdev_stop_send
[ 27.420000] STOPPED EVENT for vap 0
[ 27.872000] OL vap_stop +
[ 27.876000] wmi_unified_vdev_stop_send
[ 27.880000] OL vap_stop -
[ 27.884000] STOPPED EVENT for vap 0
[ 28.016000] OL vap_start +
[ 28.016000] OL vap_start -
[ 28.020000] ol_vdev_start_resp_ev
[ 28.024000] ol_ath_vap_join: join operation is only for STA/IBSS mode
[ 28.032000] ol_ath_wmm_update:
[ 28.036000] Notification to UMAC VAP layer
[ 28.048000] device ath1 entered promiscuous mode
[ 28.052000] br0: port 3(ath1) entering forwarding state
Configuration fi[ 28.072000] ieee80211_ioctl_siwmode: imr.ifm_active=131738, new mode=3, valid=1
le: /tmp/topolog[ 28.084000] wmi_unified_vdev_stop_send
y_5G_ath1.conf
[ 28.088000] STOPPED EVENT for vap 0
[ 28.096000] br0: port 3(ath1) entering disabled state
[ 28.100000] DEVICE IS DOWN ifname=ath1
ath1: Could not [ 28.104000] DEVICE IS DOWN ifname=ath1
connect to kerne[ 28.112000] OL vap_stop +
l driver
Using [ 28.116000] wmi_unified_vdev_stop_send
interface ath1 w[ 28.120000] OL vap_stop -
ith hwaddr ec:26[ 28.124000] STOPPED EVENT for vap 0
:ca:xx:xx:xx and ssid 'TP-LINK_5G_XXXX'
[ 28.256000] OL vap_start +
[ 28.256000] OL vap_start -
[ 28.260000] ol_vdev_start_resp_ev
[ 28.264000] ol_ath_vap_join: join operation is only for STA/IBSS mode
[ 28.272000] ol_ath_wmm_update:
[ 28.276000] Notification to UMAC VAP layer
[ 28.280000] br0: port 3(ath1) entering forwarding state
[ 28.644000] FWLOG: [33185] WAL_DBGID_BB_WDOG_TRIGGERED ( 0x81a1, 0x200008a, 0x0, 0x9 )
000a0a02<wlanWarn> already
RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or directory
Cannot find device "ppp0"
[ 30.260000] (tp_mroute_enable_write)146, tp_mroute_enable = 1
-------- new thread --------
-------- new thread --------
-------- new thread --------
[ 33.528000] qca956x_GMAC: GE0 RX DMA ENABLE
TL-WDR6500 mips #1 Wed Sep 17 17:28:37 CST 2014 (none)
TL-WDR6500 login:
|
|
简体中文
繁體中文
English
日本語
Deutsch
한국 사람
بالعربية
TÜRKÇE
português
คนไทย
IP卡
狗仔卡
显身卡