找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
查看: 6378|回复: 2

9531 qsdk wifi启动失败 求助

[复制链接]
发表于 2017-5-27 19:25 | 显示全部楼层 |阅读模式
本帖最后由 zeng362424 于 2017-5-27 19:31 编辑

1、openwrt软件版本是用的是12.09的官方固件
2、wifi驱动用的是qsdk
3、wifi设置加密以后,wifi有时候就启动不了。
web页面wifi信息显示【未开启或未关联无线】
4、反复查看wifi启动的时候串口输出,发现是获取wifi加密随机数失败
串口输出:
  1. andom: Only 16/20 bytes of stro[ 1632.670000] wlan_mlme_stop_bss: do_wme_init is set to 0
  2. ng random data available from /dev/random
  3. random: Not enough entropy pool available for secure operations
  4. WPA: Not enough entropy in random pool for secure operations - update keys later when the first station connects
复制代码


5、wifi启动的时候完整串口信息如下

  1. ath04     no private ioctls.

  2. ath14     no private ioctls.

  3. ifconfig: SIOCGIFFLAGS: No such device
  4. ifconfig: SIOCGIFFLAGS: No such device
  5. /usr/sbin/wlanconfig: ioctl: No such device
  6. /usr/sbin/wlanconfig: ioctl: No such device
  7. phy for wifi device wifi0 not found
  8. wifi0(qcawifi): disable failed
  9. phy for wifi device wifi1 not found
  10. wifi1(qcawifi): disable failed
  11. [ 1627.810000] ****Address of trace_timer :84f5a610
  12. [ 1627.870000] ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, PRIVATE_DIAG, WRITE_EEPROM, TX_DATA_SWAP, RX_DATA_SWAP, 11D)
  13. [ 1627.900000] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
  14. [ 1627.930000] ath_dfs: Version 2.0.0
  15. [ 1627.930000] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
  16. [ 1627.960000] ath_spectral: Version 2.0.0
  17. [ 1627.960000] Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved
  18. [ 1627.970000] SPECTRAL module built on May 27 2017 14:03:18
  19. [ 1627.990000] ath_tx99: Version 2.0
  20. [ 1627.990000] Copyright (c) 2010 Atheros Communications, Inc, All Rights Reserved
  21. [ 1628.040000] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
  22. [ 1628.190000] signal_detect_kernel dev register success(0)
  23. [ 1628.200000] __ath_attach: Set global_scn[0]
  24. [ 1628.200000] *** All the minfree values should be <= ATH_TXBUF-32, otherwise default value will be used instead ***
  25. [ 1628.210000] ACBKMinfree = 48
  26. [ 1628.220000] ACBEMinfree = 32
  27. [ 1628.220000] ACVIMinfree = 16
  28. [ 1628.220000] ACVOMinfree = 0
  29. [ 1628.220000] CABMinfree = 48
  30. [ 1628.230000] UAPSDMinfree = 0
  31. [ 1628.230000] ATH_TXBUF=2700
  32. [ 1628.240000] Enterprise mode: 0x03fc0000
  33. [ 1628.250000] Restoring Cal data from DRAM
  34. [ 1628.250000]
  35. [ 1628.250000] ART Version : -48.0.0
  36. [ 1628.250000] SW Image Version : -48.0.0.0.0
  37. [ 1628.260000] Board Revision :  
  38. [ 1628.260000] ar9300_attach: nf_2_nom -110 nf_2_max -60 nf_2_min -125
  39. [ 1628.270000] SPECTRAL : get_capability not registered
  40. [ 1628.280000] HAL_CAP_PHYDIAG : Capable
  41. [ 1628.280000] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 231)
  42. [ 1628.290000] SPECTRAL : get_capability not registered
  43. [ 1628.290000] HAL_CAP_RADAR   : Capable
  44. [ 1628.300000] SPECTRAL : Need to fix the capablity check for SPECTRAL
  45. [ 1628.300000]  (spectral_attach : 236)
  46. [ 1628.310000] SPECTRAL : get_capability not registered
  47. [ 1628.310000] HAL_CAP_SPECTRAL_SCAN : Capable
  48. [ 1628.320000] SPECTRAL : get_tsf64 not registered
  49. [ 1628.320000] spectral_init_netlink 65 NULL SKB
  50. [ 1628.330000] SPECTRAL : No ADVANCED SPECTRAL SUPPORT
  51. [ 1628.330000] SPECTRAL :----- module attached
  52. [ 1628.340000] Green-AP : Green-AP : Attached
  53. [ 1628.340000]
  54. [ 1628.340000] ath_get_caps[6175] rx chainmask mismatch actual 3 sc_chainmak 0
  55. [ 1628.350000] ath_get_caps[6150] tx chainmask mismatch actual 3 sc_chainmak 0
  56. [ 1628.360000] ath_attach_dfs[12739] dfsdomain 1
  57. [ 1628.380000] SPECTRAL : module already attached
  58. [ 1628.380000] osif_wrap_attach:299 osif wrap attached
  59. [ 1628.390000] osif_wrap_devt_init:919 osif wrap dev table init done
  60. [ 1628.400000] ath_tx_paprd_init sc 863e0000 PAPRD disabled in HAL
  61. [ 1628.430000] wifi0: Atheros ???: mem=0xb8100000, irq=47
  62. [ 1628.450000] ath_pci: SmartAntenna-DRT-0.1 (Atheros/multi-bss)
  63. [ 1628.450000] ath_pci_probe
  64. [ 1628.460000] PCI device id is 0050 :0050
  65. [ 1628.460000] ath_pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x101fffff 64bit]
  66. [ 1628.470000] ath_pci 0000:00:00.0: ath DEBUG: sc=0x85d71c00
  67. [ 1628.480000]
  68. [ 1628.480000]  ol_ath_pci_configure : num_desired MSI set to 0
  69. [ 1628.480000]
  70. [ 1628.480000]  Using PCI Legacy Interrupt
  71. [ 1629.490000] CE_per_engine_handler_adjust, base=85d71c00 offset=00057400
  72. [ 1629.490000] CE_per_engine_handler_adjust, base=85d71c00 offset=00057800
  73. [ 1629.510000] __ol_ath_attach: ath_attach TODO
  74. [ 1629.520000] __ol_ath_attach: dev name wifi1
  75. [ 1629.520000] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
  76. [ 1629.530000]  OL_ACBKMinfree : 0
  77. [ 1629.530000]  OL_ACBEMinfree : 0
  78. [ 1629.540000]  OL_ACVIMinfree : 0
  79. [ 1629.540000]  OL_ACVOMinfree : 0
  80. [ 1629.540000] ol_ath_attach: cal_location=803c56a4, scn->cal_mem=c00986a4ol_ath_attach() BMI inited.
  81. [ 1629.550000] ol_ath_attach() BMI Get Target Info.
  82. [ 1629.560000] ol_ath_attach() TARGET TYPE: 7 Vers 0x4100016d
  83. [ 1629.560000] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
  84. [ 1629.570000] ol_ath_attach() configure Target .
  85. [ 1629.570000] qc98xx_verify_checksum error: flash checksum 0x3d37, computed 0x21c1
  86. [ 1629.580000] ol_transfer_bin_file 2231: Download Flash data len 2116
  87. [ 1629.590000] Swift firmware download
  88. [ 1629.600000] ol_transfer_bin_file 2161: Download Firmware data len 223180
  89. [ 1630.560000] ol_ath_attach() Download FW.
  90. [ 1630.570000] ol_ath_attach() HT Create .
  91. [ 1630.570000] ol_ath_attach() HIF Claim.
  92. [ 1630.580000] ol_ath_attach() BMI Done.
  93. [ 1630.580000] ol_ath_attach() WMI attached. wmi_handle 86cf0000
  94. [ 1630.590000] +HWT
  95. [ 1630.590000] SOC_RESET_CONTROL_ADDRESS : 800
  96. [ 1630.590000] CPU_INTR_ADDRESS = [0]
  97. [ 1630.600000] SOC_GLOBAL_RESET_ADDRESS = [0]
  98. [ 1630.600000] Rx_Filter : [80200]
  99. [ 1630.600000] CE_per_engine_handler_adjust, base=85d71c00 offset=00057400
  100. [ 1630.610000] CE_per_engine_handler_adjust, base=85d71c00 offset=00057800
  101. [ 1630.620000] CE_per_engine_handler_adjust, base=85d71c00 offset=00057c00
  102. [ 1630.630000] CE_per_engine_handler_adjust, base=85d71c00 offset=00058000
  103. [ 1630.630000] CE_per_engine_handler_adjust, base=85d71c00 offset=00058400
  104. [ 1630.640000] CE_per_engine_handler_adjust, base=85d71c00 offset=00058800
  105. [ 1630.650000] CE_recv_buf_enqueue 653 Populate last entry 512 for CE 5
  106. [ 1630.660000] CE_recv_buf_enqueue 662 CE 5 wi 511 dest_ptr 0x62aa020 nbytes 0 recv_ctxt 0x85b6b300
  107. [ 1630.670000] Target:859f7800 HTC Service:0x0001, ULpipe:0 DLpipe:1 id:0 Ready
  108. [ 1630.670000] -HWT
  109. [ 1630.680000] Target:859f7800 HTC Service:0x0300, ULpipe:4 DLpipe:5 id:1 Ready
  110. [ 1630.680000] HTC Service:0x0300 ep:1 TX flow control disabled
  111. [ 1630.690000] CE_pkt_dl_len_set CE 4 Pkt download length 64
  112. [ 1630.700000] ol_txrx_pdev_attach: 1424 tx desc's allocated ; range starts from 85990000
  113. [ 1630.710000] Target:859f7800 HTC Service:0x0100, ULpipe:3 DLpipe:2 id:2 Ready
  114. [ 1630.720000] HTC Service:0x0100 ep:2 TX flow control disabled
  115. [ 1630.720000] wmi_service_ready_event_rx:  WMI UNIFIED SERVICE READY event
  116. [ 1630.730000] num_rf_chain : 00000001
  117. [ 1630.730000] ht_cap_info: : 0000085b
  118. [ 1630.740000] vht_cap_info : 338001b2
  119. [ 1630.740000] vht_supp_mcs : 0000fffe
  120. [ 1630.750000] LARGE_AP enabled. num_peers 144, num_vdevs 16, num_tids 256, lteu_support 0
  121. [ 1630.750000] idx 0 req 1  num_units 0 num_unit_info 2 unit size 404 actual units 145
  122. [ 1630.760000] chunk 0 len 58580 requested ,ptr  0x59a0000
  123. [ 1630.770000] FIRMWARE:P 145 V 16 T 443
  124. [ 1630.770000]  
  125. [ 1630.780000] wmi_ready_event_rx:  WMI UNIFIED READY event
  126. [ 1630.790000] ol_ath_connect_htc() WMI is ready
  127. [ 1630.790000] ol_ath_set_host_app_area TODO
  128. [ 1630.790000] target uses HTT version 2.1; host uses 2.1
  129. [ 1630.810000] ol_ath_attach() connect HTC.
  130. [ 1630.810000] bypasswmi : 0
  131. [ 1630.810000] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
  132. [ 1630.820000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
  133. [ 1630.830000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
  134. [ 1630.840000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0
  135. [ 1630.850000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
  136. [ 1630.850000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150
  137. [ 1630.860000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080
  138. [ 1630.870000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080
  139. [ 1630.880000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080
  140. [ 1630.880000] Add VHT80 channel: 5210
  141. [ 1630.890000] Add VHT80 channel: 5290
  142. [ 1630.890000] Add VHT80 channel: 5530
  143. [ 1630.890000] Add VHT80 channel: 5610
  144. [ 1630.900000] Add VHT80 channel: 5690
  145. [ 1630.900000] Add VHT80 channel: 5775
  146. [ 1630.900000] Skipping VHT80 channel 5825
  147. [ 1630.910000] ol_ath_phyerr_attach: called
  148. [ 1630.910000] OL Resmgr Init-ed
  149. [ 1630.920000] ol_if_spectral_setup
  150. [ 1630.920000] SPECTRAL : get_capability not registered
  151. [ 1630.930000] HAL_CAP_PHYDIAG : Capable
  152. [ 1630.930000] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 231)
  153. [ 1630.940000] SPECTRAL : get_capability not registered
  154. [ 1630.940000] HAL_CAP_RADAR   : Capable
  155. [ 1630.950000] SPECTRAL : Need to fix the capablity check for SPECTRAL
  156. [ 1630.950000]  (spectral_attach : 236)
  157. [ 1630.960000] SPECTRAL : get_capability not registered
  158. [ 1630.960000] HAL_CAP_SPECTRAL_SCAN : Capable
  159. [ 1630.970000] SPECTRAL : get_tsf64 not registered
  160. [ 1630.970000] spectral_init_netlink 65 NULL SKB
  161. [ 1630.980000] Green-AP : Green-AP : Attached
  162. [ 1630.980000]
  163. [ 1630.980000] Green-AP : Attached
  164. [ 1630.990000] ol_if_dfs_setup: called
  165. [ 1630.990000] ol_if_dfs_attach: called; ptr=846e1974, radar_info=86e77b78
  166. [ 1631.000000] ol_ath_rtt_meas_report_attach: called
  167. [ 1631.000000] ol_ath_attach() UMAC attach .
  168. [ 1631.010000] ol_ath_attach: Calling ol_if_dfs_configure
  169. [ 1631.010000] osif_wrap_attach:299 osif wrap attached
  170. [ 1631.020000] osif_wrap_devt_init:919 osif wrap dev table init done
  171. [ 1631.030000] __ol_ath_attach: init tx/rx TODO
  172. [ 1631.030000] __ol_ath_attach: hard_header_len reservation 58
  173. [ 1631.090000] Initializing Pktlogs for 11ac
  174. [ 1631.130000] ath_attach_dfs[12739] dfsdomain 1
  175. [ 1631.170000] wlan_vap_create : enter. devhandle=0x86d30380, opmode=IEEE80211_M_HOSTAP, flags=0x1
  176. [ 1631.180000] wlan_vap_create : exit. devhandle=0x86d30380, opmode=IEEE80211_M_HOSTAP, flags=0x1.
  177. [ 1631.190000] VAP device ath0 created osifp: (862c7380) os_if: (82ae4000)
  178. [ 1631.250000] Set freq vap 0 stop send + 82ae4000
  179. [ 1631.250000] wlan_mlme_stop_bss: do_wme_init is set to 0
  180. [ 1631.260000] Set freq vap 0 stop send -82ae4000
  181. [ 1631.390000] Set wait done --82ae4000
  182. [ 1631.410000] Setting Max Stations:60
  183. Interface doesn't accept private ioctl...
  184. stafwd (8BE0): Invalid argument
  185. [ 1631.440000]  
  186. [ 1631.440000]  DES SSID SET=
  187. [ 1631.450000]  
  188. [ 1631.450000]  DES SSID SET=SSID_2G_000099
  189. [ 1631.550000] wlan_mlme_stop_bss: do_wme_init is set to 0
  190. [ 1631.580000] [wifi1] FWLOG: [1679181] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x460, 0x460, 0x0 )
  191. [ 1631.590000] [wifi1] FWLOG: [1679181] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x460, 0x460, 0x0 )
  192. [ 1631.600000] [wifi1] FWLOG: [1679181] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x460, 0x460, 0x0 )
  193. [ 1631.610000] [wifi1] FWLOG: [1679181] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x460, 0x460, 0x0 )
  194. [ 1631.620000] [wifi1] FWLOG: [1679186] WHAL_ERROR_RECV_STOPPCU ( 0x110298a, 0x3 )
  195. [ 1631.630000] [wifi1] FWLOG: [1679186] WHAL_ERROR_RESET_PM (  )
  196. [ 1631.630000] [wifi1] FWLOG: [1679190] WAL_DBGID_DEV_RESET ( 0x1, 0x1, 0x1 )
  197. [ 1631.640000] [wifi1] FWLOG: [1679432] WAL_DBGID_DEV_RESET ( 0x1, 0x1, 0x1 )
  198. [ 1631.680000] 8021q: adding VLAN 0 to HW filter on device ath0
  199. [ 1632.300000] device ath0 entered promiscuous mode
  200. [ 1632.310000] br-lan: port 3(ath0) entered forwarding state
  201. [ 1632.310000] br-lan: port 3(ath0) entered forwarding state
  202. Configuration fi[ 1632.400000]  ieee80211_ioctl_siwmode: imr.ifm_active=393856, new mode=3, valid=1
  203. le: /var/run/hos[ 1632.410000] _ieee80211_scan_unregister_event_handler: Failed to unregister evhandler=82864cc4 arg=86c80000
  204. tapd-ath0.conf
  205. [ 1632.420000]  Scan in progress.. Cancelling it
  206. [ 1632.470000] wlan_mlme_stop_bss: do_wme_init is set to 0
  207. [ 1632.470000] br-lan: port 3(ath0) entered disabled state
  208. [ 1632.480000]  DEVICE IS DOWN ifname=ath0
  209. ath0: Could not [ 1632.480000]  DEVICE IS DOWN ifname=ath0
  210. connect to kernel driver
  211. Using interface ath0 with hwaddr b8:fd:32:00:00:9a and ssid 'SSID_2G_000099'
  212. random: Only 16/20 bytes of stro[ 1632.670000] wlan_mlme_stop_bss: do_wme_init is set to 0
  213. ng random data available from /dev/random
  214. random: Not enough entropy pool available for secure operations
  215. WPA: Not enough entropy in random pool for secure operations - update keys later when the first station connects
  216. [ 1632.850000] br-lan: port 3(ath0) entered forwarding state
  217. [ 1632.860000] br-lan: port 3(ath0) entered forwarding state
  218. [ 1632.860000] 8021q: adding VLAN 0 to HW filter on device ath0
  219. daemon: No such device[ 1632.880000] wlan_mlme_stop_bss: do_wme_init is set to 0

  220. daemon: No such device
  221. [ 1634.860000] br-lan: port 3(ath0) entered forwarding state
  222. [ 1635.660000] mlme_create_infra_bss:530 numvaps = 1 do_wme_init is set
  223. [ 1635.670000] mlme_create_infra_bss:533 vap active 1 numvaps 1
  224. [ 1635.680000] [ol_ath_iw_setcountry][1552] *p=43, *(p+1)=4e
  225. [ 1635.690000] isCountryCodeValid: EEPROM regdomain 0x0
  226. [ 1635.690000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
  227. [ 1635.700000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
  228. [ 1635.710000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0
  229. [ 1635.710000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
  230. [ 1635.720000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150
  231. [ 1635.730000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080
  232. [ 1635.730000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080
  233. [ 1635.740000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080
  234. [ 1635.750000] Add VHT80 channel: 5210
  235. [ 1635.750000] Add VHT80 channel: 5290
  236. [ 1635.760000] Add VHT80 channel: 5775
  237. [ 1635.760000] Skipping VHT80 channel 5825
  238. [ 1635.770000] wlan_mlme_stop_bss: do_wme_init is set to 0
  239. [ 1635.790000] br-lan: port 3(ath0) entered disabled state
  240. [ 1635.810000] ath_ioctl: SIOC80211IFCREATE CALLED
  241. [ 1635.810000] wmi_unified_vdev_create_send: ID = 0 VAP Addr = b8:fd:32:00:00:9b:
  242. [ 1635.820000] Setting dscp for vap id: 0
  243. [ 1635.830000] VAP device ath1 created osifp: (87b5b380) os_if: (82ac0000)
  244. [ 1635.870000] Set freq vap 0 stop send + 82ac0000
  245. [ 1635.880000] wlan_mlme_stop_bss: do_wme_init is set to 0
  246. [ 1635.880000] OL vap_stop +
  247. [ 1635.880000] wmi_unified_vdev_stop_send for vap 0 (86cf0000)
  248. [ 1635.890000] OL vap_stop -
  249. [ 1635.890000] STOPPED EVENT for vap 0 (86cf0000)
  250. [ 1635.900000] Set freq vap 0 stop send -82ac0000
  251. [ 1636.030000] Set wait done --82ac0000
  252. [ 1636.050000] Setting Max Stations:60
  253. Interface doesn't accept private ioctl...
  254. stafwd (8BE0): Invalid argument
  255. [ 1636.080000]  
  256. [ 1636.080000]  DES SSID SET=
  257. [ 1636.090000]  
  258. [ 1636.090000]  DES SSID SET=SSID_5G_000099
  259. [ 1636.130000] wlan_mlme_stop_bss: do_wme_init is set to 0
  260. [ 1636.140000] OL vap_stop +
  261. [ 1636.140000] wmi_unified_vdev_stop_send for vap 0 (86cf0000)
  262. [ 1636.150000] OL vap_stop -
  263. [ 1636.150000] STOPPED EVENT for vap 0 (86cf0000)
  264. [ 1636.280000] OL vap_start +
  265. [ 1636.280000] wmi_unified_vdev_start_send for vap 0 (86cf0000)
  266. [ 1636.280000] OL vap_start -
  267. [ 1636.290000] ol_ath_wmm_update:
  268. [ 1636.290000] ieee80211_beacon_init:(360) Restore wme params
  269. [ 1636.300000] ol_ath_wmm_update:
  270. [ 1636.300000] wmi_unified_vdev_up_send for vap 0 (86cf0000)
  271. [ 1637.290000] 8021q: adding VLAN 0 to HW filter on device ath1
  272. [ 1637.870000] device ath1 entered promiscuous mode
  273. [ 1637.870000] br-lan: port 4(ath1) entered forwarding state
  274. [ 1637.880000] br-lan: port 4(ath1) entered forwarding state
  275. Configuration fi[ 1637.960000]  ieee80211_ioctl_siwmode: imr.ifm_active=18875008, new mode=3, valid=1
  276. le: /var/run/hos[ 1637.970000] wlan_mlme_stop_bss: do_wme_init is set to 0
  277. tapd-ath1.conf
  278. [ 1637.980000] wmi_unified_vdev_stop_send for vap 0 (86cf0000)
  279. [ 1637.990000] STOPPED EVENT for vap 0 (86cf0000)
  280. [ 1637.990000] br-lan: port 4(ath1) entered disabled state
  281. [ 1638.000000]  DEVICE IS DOWN ifname=ath1
  282. ath1: Could not [ 1638.000000]  DEVICE IS DOWN ifname=ath1
  283. connect to kernel driver
  284. Using interface ath1 with hwaddr b8:fd:32:00:00:9b and ssid 'SSID_5G_000099'
  285. [ 1638.190000] wlan_mlme_stop_bss: do_wme_init is set to 0
  286. [ 1638.190000] OL vap_stop +
  287. [ 1638.190000] wmi_unified_vdev_stop_send for vap 0 (86cf0000)
  288. [ 1638.200000] OL vap_stop -
  289. [ 1638.200000] STOPPED EVENT for vap 0 (86cf0000)
  290. [ 1638.340000] OL vap_start +
  291. [ 1638.340000] wmi_unified_vdev_start_send for vap 0 (86cf0000)
  292. [ 1638.340000] OL vap_start -
  293. [ 1638.350000] ol_ath_wmm_update:
  294. [ 1638.350000] ieee80211_beacon_init:(360) Restore wme params
  295. [ 1638.360000] ol_ath_wmm_update:
  296. [ 1638.360000] wmi_unified_vdev_up_send for vap 0 (86cf0000)
  297. [ 1638.580000] [wifi1] FWLOG: [1686773] WAL_DBGID_SECURITY_ENCR_EN (  )
  298. [ 1638.590000] [wifi1] FWLOG: [1686773] WAL_DBGID_SECURITY_MCAST_KEY_SET ( 0x1 )
  299. [ 1639.350000] br-lan: port 4(ath1) entered forwarding state
  300. [ 1639.350000] br-lan: port 4(ath1) entered forwarding state
  301. [ 1639.360000] 8021q: adding VLAN 0 to HW filter on device ath1
  302. daemon: No such device[ 1639.370000] wlan_mlme_stop_bss: do_wme_init is set to 0

  303. daemon: No suc[ 1639.370000] wmi_unified_vdev_stop_send for vap 0 (86cf0000)
  304. h device
  305. [ 1639.380000] STOPPED EVENT for vap 0 (86cf0000)
  306. [ 1639.510000] OL vap_start +
  307. [ 1639.510000] wmi_unified_vdev_start_send for vap 0 (86cf0000)
  308. [ 1639.510000] OL vap_start -
  309. [ 1639.520000] ieee80211_wme_initparams : iv_rescan  is set
  310. [ 1639.520000] ieee80211_beacon_init:(360) Restore wme params
  311. [ 1639.530000] ol_ath_wmm_update:
  312. [ 1639.530000] wmi_unified_vdev_up_send for vap 0 (86cf0000)
  313. [ 1639.550000] wlan_mlme_stop_bss: do_wme_init is set to 0
  314. [ 1639.550000] wmi_unified_vdev_stop_send for vap 0 (86cf0000)
  315. [ 1639.560000] STOPPED EVENT for vap 0 (86cf0000)
  316. [ 1639.570000] br-lan: port 4(ath1) entered disabled state
  317. [ 1639.580000] [wifi1] FWLOG: [1687981] WAL_DBGID_SECURITY_MCAST_KEY_SET ( 0x1 )
  318. Error for wireless request "Set Frequency" (8B04) :
  319.     SET failed on device ath04 ; No such device.
  320. Error for wireless request "Set Frequency" (8B04) :
  321.     SET failed on device ath14 ; No such device.
  322. ath04     no private ioctls.

  323. ath14     no private ioctls.

  324. [ 1640.570000] PRIV_PTK: Register module band-steering success.
  325. /etc/rc.common: local: line 1: enable,: bad variable name
  326. sh: bad number
  327. /etc/rc.common: local: line 1: enable,: bad variable name
  328. sh: bad number
  329. Terminated
  330. root@RFA-333_000099:/tmp#
复制代码
6.iwconfig显示的wifi信息如下
  1. iwconfig
  2. wifi0     no wireless extensions.

  3. lo        no wireless extensions.

  4. eth1      no wireless extensions.

  5. ath1      IEEE 802.11ac  ESSID:"SSID_5G_000099"  
  6.           Mode:Master  Frequency:5.785 GHz  Access Point: Not-Associated   
  7.           Bit Rate:0 kb/s   Tx-Power=15 dBm   
  8.           RTS thr:off   Fragment thr:off
  9.           Encryption key:off
  10.           Power Management:off
  11.           Link Quality=21/94  Signal level=-85 dBm  Noise level=-95 dBm
  12.           Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
  13.           Tx excessive retries:0  Invalid misc:0   Missed beacon:0

  14. eth0      no wireless extensions.

  15. ath0      IEEE 802.11ng  ESSID:"SSID_2G_000099"  
  16.           Mode:Master  Frequency:2.437 GHz  Access Point: Not-Associated   
  17.           Bit Rate:0 kb/s   Tx-Power=21 dBm   
  18.           RTS thr:off   Fragment thr:off
  19.           Encryption key:off
  20.           Power Management:off
  21.           Link Quality=0/94  Signal level=-95 dBm  Noise level=-95 dBm
  22.           Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
  23.           Tx excessive retries:0  Invalid misc:0   Missed beacon:0

  24. br-lan    no wireless extensions.

  25. wifi1     no wireless extensions.

  26. bond0     no wireless extensions.
复制代码
7.网上找了很多资料,都说删除/dev/random,然后把random 软连接到urandom,但是我试了wifi还是启动不了

8.有知道相关问题的麻烦告知一下,谢谢了。

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有账号?立即注册

×
我的恩山、我的无线 The best wifi forum is right here.
发表于 2017-10-21 10:29 | 显示全部楼层
我编译qsdk 生成固件刷进去为啥  luci菜单里没有wifi。。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2017-10-21 12:44 | 显示全部楼层
碰巧遇到过这个问题,看能不能对得上号:
[PATCH] /dev/random: Insufficient of entropy on many architectures
https://lwn.net/Articles/567070/
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-4-26 21:08

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表