已解决：任子行 net 110 88F6281，固件和刷机方法

csu05m***

改以下文件
(op根目录)/target/linux/archxxx/base-files/etc/board.d/02_network

l***

csu05michael 发表于 2017-9-4 21:39
改以下文件
(op根目录)/target/linux/archxxx/base-files/etc/board.d/02_network

你好，这里，我分别改过这几个位置。

1.试过将eth0，eth1分别改为eth0.1，eth0.2
2.1 2 3 4 5t以及下面0 5t这里我改过多个组合，比如0 1 2 3 5t和4 5t，偶尔好一点的情况是LAN可以自动分配IP地址了。
但从始自终，交换机不能建立，WAN口没有。

我比较菜，对交换机VLAN更不了解，麻烦大牛具体指点。

csu05m***

lce 发表于 2017-9-5 10:49
你好，这里，我分别改过这几个位置。

1.试过将eth0，eth1分别改为eth0.1，eth0.2

设备网口布局是什么样子的，WAN口在左还是右

l***

csu05michael 发表于 2017-9-5 12:06
设备网口布局是什么样子的，WAN口在左还是右

你好，WAN在最左，往右依次是四个LAN。。
详见：https://www.right.com.cn/forum/f ... =%C8%CE%D7%D3%D0%D0

l***

我这样配置的时候，通过无线网络可以上网，但相当于瘦AP，IP地址是上级路由的LAN网IP（192.168.10.x）。通过有线不能上网，有线的IP地址是192.168.1.X网段，也就是正常的LAN分配的IP段。

如果我把下面那行‘4 5t'改成’4 6t'，则连接无线网络后，无线网络的IP地址是正常的192.168.1.x的网段，有线网络也是，但都不能上网。

不论怎样，在luci，网络->交换机里，不能启用。。命令行swconfig list也没有。如果/etc/init.d/network restart，则有提示：Failed to connect to the switch. Use the "list" command to see which switches are available.

csu05m***

仔细阅读02_network这个文件吧，switch配置、网口布局都在这里面

l***

附系统日志：

Tue Sep  5 11:57:23 2017 kern.info kernel: [  743.494009] br-lan: port 1(eth0.1) entered forwarding state
Tue Sep  5 11:57:23 2017 daemon.notice netifd: Interface 'lan' is enabled
Tue Sep  5 11:57:23 2017 daemon.notice netifd: Interface 'lan' is setting up now
Tue Sep  5 11:57:23 2017 daemon.notice netifd: Interface 'lan' is now up
Tue Sep  5 11:57:23 2017 daemon.notice netifd: Interface 'loopback' is enabled
Tue Sep  5 11:57:23 2017 daemon.notice netifd: Interface 'loopback' is setting up now
Tue Sep  5 11:57:23 2017 daemon.notice netifd: Interface 'loopback' is now up
Tue Sep  5 11:57:23 2017 daemon.notice netifd: Interface 'wan' is enabled
Tue Sep  5 11:57:23 2017 daemon.notice netifd: Network device 'lo' link is up
Tue Sep  5 11:57:23 2017 daemon.notice netifd: Interface 'loopback' has link connectivity
Tue Sep  5 11:57:23 2017 daemon.notice netifd: Network device 'eth0' link is up
Tue Sep  5 11:57:23 2017 daemon.notice netifd: VLAN 'eth0.2' link is up
Tue Sep  5 11:57:23 2017 daemon.notice netifd: Interface 'wan' has link connectivity
Tue Sep  5 11:57:23 2017 daemon.notice netifd: Interface 'wan' is setting up now
Tue Sep  5 11:57:23 2017 daemon.notice netifd: VLAN 'eth0.1' link is up
Tue Sep  5 11:57:23 2017 daemon.notice netifd: Bridge 'br-lan' link is up
Tue Sep  5 11:57:23 2017 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Sep  5 11:57:23 2017 daemon.notice netifd: wan (5764): udhcpc (v1.23.2) started
Tue Sep  5 11:57:23 2017 daemon.notice netifd: wan (5764): Sending discover...
Tue Sep  5 11:57:23 2017 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Sep  5 11:57:24 2017 daemon.notice netifd: radio0 (5746): Configuration file: /var/run/hostapd-phy0.conf
Tue Sep  5 11:57:24 2017 kern.info kernel: [  744.208414] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Tue Sep  5 11:57:24 2017 kern.info kernel: [  744.227076] device wlan0 entered promiscuous mode
Tue Sep  5 11:57:24 2017 kern.info kernel: [  744.231894] br-lan: port 2(wlan0) entered forwarding state
Tue Sep  5 11:57:24 2017 kern.info kernel: [  744.237419] br-lan: port 2(wlan0) entered forwarding state
Tue Sep  5 11:57:24 2017 daemon.notice netifd: radio0 (5746): Using interface wlan0 with hwaddr 94:db:c9:79:9a:30 and ssid "BUTONGWIFI"
Tue Sep  5 11:57:24 2017 kern.info kernel: [  744.287920] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Tue Sep  5 11:57:24 2017 daemon.notice netifd: radio0 (5746): wlan0: interface state UNINITIALIZED->ENABLED
Tue Sep  5 11:57:24 2017 daemon.notice netifd: radio0 (5746): wlan0: AP-ENABLED
Tue Sep  5 11:57:24 2017 daemon.notice netifd: Network device 'wlan0' link is up
Tue Sep  5 11:57:24 2017 user.notice upnp daemon: external interface not found, not starting
Tue Sep  5 11:57:25 2017 kern.info kernel: [  745.487449] br-lan: port 1(eth0.1) entered forwarding state
Tue Sep  5 11:57:26 2017 kern.info kernel: [  746.227446] br-lan: port 2(wlan0) entered forwarding state
Tue Sep  5 11:57:26 2017 daemon.notice netifd: wan (5764): Sending discover...
Tue Sep  5 11:57:29 2017 daemon.notice netifd: wan (5764): Sending discover...
Tue Sep  5 11:57:47 2017 kern.info kernel: [  767.017853] device wlan0 left promiscuous mode
Tue Sep  5 11:57:47 2017 kern.info kernel: [  767.022363] br-lan: port 2(wlan0) entered disabled state
Tue Sep  5 11:57:47 2017 kern.info kernel: [  767.524127] br-lan: port 1(eth0.1) entered disabled state
Tue Sep  5 11:57:47 2017 kern.info kernel: [  767.531590] device eth0.1 left promiscuous mode
Tue Sep  5 11:57:47 2017 kern.info kernel: [  767.536148] device eth0 left promiscuous mode
Tue Sep  5 11:57:47 2017 kern.info kernel: [  767.540638] br-lan: port 1(eth0.1) entered disabled state
Tue Sep  5 11:57:47 2017 kern.info kernel: [  767.569123] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
Tue Sep  5 11:57:47 2017 kern.info kernel: [  767.586608] device eth0 entered promiscuous mode
Tue Sep  5 11:57:47 2017 kern.info kernel: [  767.598309] br-lan: port 1(eth0) entered forwarding state
Tue Sep  5 11:57:47 2017 kern.info kernel: [  767.603753] br-lan: port 1(eth0) entered forwarding state
Tue Sep  5 11:57:47 2017 daemon.notice netifd: Interface 'lan' is enabled
Tue Sep  5 11:57:47 2017 daemon.notice netifd: Interface 'lan' is setting up now
Tue Sep  5 11:57:47 2017 daemon.notice netifd: Interface 'lan' is now up
Tue Sep  5 11:57:47 2017 kern.info kernel: [  767.624644] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
Tue Sep  5 11:57:47 2017 kern.info kernel: [  767.655169] device eth0.1 entered promiscuous mode
Tue Sep  5 11:57:47 2017 kern.info kernel: [  767.660104] br-lan: port 2(eth0.1) entered forwarding state
Tue Sep  5 11:57:47 2017 kern.info kernel: [  767.665713] br-lan: port 2(eth0.1) entered forwarding state
Tue Sep  5 11:57:47 2017 daemon.notice netifd: Interface 'loopback' is enabled
Tue Sep  5 11:57:47 2017 daemon.notice netifd: Interface 'loopback' is setting up now
Tue Sep  5 11:57:47 2017 daemon.notice netifd: Interface 'loopback' is now up
Tue Sep  5 11:57:47 2017 daemon.notice netifd: Interface 'wan' is enabled
Tue Sep  5 11:57:47 2017 daemon.notice netifd: Network device 'lo' link is up
Tue Sep  5 11:57:47 2017 daemon.notice netifd: Interface 'loopback' has link connectivity
Tue Sep  5 11:57:47 2017 daemon.notice netifd: Bridge 'br-lan' link is up
Tue Sep  5 11:57:47 2017 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Sep  5 11:57:47 2017 daemon.notice netifd: Network device 'eth0' link is up
Tue Sep  5 11:57:47 2017 daemon.notice netifd: VLAN 'eth0.2' link is up
Tue Sep  5 11:57:47 2017 daemon.notice netifd: Interface 'wan' has link connectivity
Tue Sep  5 11:57:47 2017 daemon.notice netifd: Interface 'wan' is setting up now
Tue Sep  5 11:57:47 2017 daemon.notice netifd: VLAN 'eth0.1' link is up
Tue Sep  5 11:57:47 2017 daemon.notice netifd: wan (6063): udhcpc (v1.23.2) started
Tue Sep  5 11:57:47 2017 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Sep  5 11:57:48 2017 daemon.notice netifd: wan (6063): Sending discover...
Tue Sep  5 11:57:48 2017 daemon.notice netifd: radio0 (6045): Configuration file: /var/run/hostapd-phy0.conf
Tue Sep  5 11:57:48 2017 kern.info kernel: [  768.428344] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Tue Sep  5 11:57:48 2017 kern.info kernel: [  768.439789] device wlan0 entered promiscuous mode
Tue Sep  5 11:57:48 2017 kern.info kernel: [  768.444570] br-lan: port 3(wlan0) entered forwarding state
Tue Sep  5 11:57:48 2017 kern.info kernel: [  768.450131] br-lan: port 3(wlan0) entered forwarding state
Tue Sep  5 11:57:48 2017 daemon.notice netifd: radio0 (6045): Using interface wlan0 with hwaddr 94:db:c9:79:9a:30 and ssid "BUTONGWIFI"
Tue Sep  5 11:57:48 2017 kern.info kernel: [  768.497057] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Tue Sep  5 11:57:48 2017 daemon.notice netifd: radio0 (6045): wlan0: interface state UNINITIALIZED->ENABLED
Tue Sep  5 11:57:48 2017 daemon.notice netifd: radio0 (6045): wlan0: AP-ENABLED
Tue Sep  5 11:57:48 2017 daemon.notice netifd: Network device 'wlan0' link is up
Tue Sep  5 11:57:49 2017 user.notice upnp daemon: external interface not found, not starting
Tue Sep  5 11:57:49 2017 kern.info kernel: [  769.597480] br-lan: port 1(eth0) entered forwarding state
Tue Sep  5 11:57:49 2017 kern.info kernel: [  769.657474] br-lan: port 2(eth0.1) entered forwarding state
Tue Sep  5 11:57:50 2017 kern.info kernel: [  770.447443] br-lan: port 3(wlan0) entered forwarding state
Tue Sep  5 11:57:51 2017 daemon.notice netifd: wan (6063): Sending discover...
Tue Sep  5 11:57:52 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:57:54 2017 daemon.notice netifd: wan (6063): Sending discover...
Tue Sep  5 11:57:57 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:57:58 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:58:00 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:58:01 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:58:06 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:58:11 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:58:16 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:58:21 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:58:26 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:58:31 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:58:36 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:58:41 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:58:46 2017 daemon.notice easycwmpd: add event '2 PERIODIC'
Tue Sep  5 11:58:46 2017 daemon.notice easycwmpd: start session
Tue Sep  5 11:58:46 2017 daemon.notice easycwmpd: configured acs url http://192.168.1.110:8080/openacs/acs
Tue Sep  5 11:58:46 2017 daemon.notice easycwmpd: external script init
Tue Sep  5 11:58:46 2017 daemon.notice easycwmpd: external: execute inform parameter
Tue Sep  5 11:58:46 2017 daemon.notice easycwmpd: send Inform
Tue Sep  5 11:58:46 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:58:49 2017 daemon.notice easycwmpd: LibCurl Error: Failed to connect to 192.168.1.110 port 8080: No route to host
Tue Sep  5 11:58:49 2017 daemon.notice easycwmpd: sending http message failed
Tue Sep  5 11:58:49 2017 daemon.notice easycwmpd: sending Inform failed
Tue Sep  5 11:58:49 2017 daemon.notice easycwmpd: external: execute apply service
Tue Sep  5 11:58:49 2017 daemon.notice easycwmpd: external script exit
Tue Sep  5 11:58:49 2017 daemon.notice easycwmpd: end session failed
Tue Sep  5 11:58:49 2017 daemon.notice easycwmpd: retry session in 3840 sec, RetryCount = 12
Tue Sep  5 11:58:51 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:58:56 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:59:01 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:59:06 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:59:11 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:59:13 2017 daemon.info hostapd: wlan0: STA e0:ca:94:cb:0c:a0 IEEE 802.11: authenticated
Tue Sep  5 11:59:13 2017 daemon.info hostapd: wlan0: STA e0:ca:94:cb:0c:a0 IEEE 802.11: associated (aid 1)
Tue Sep  5 11:59:13 2017 daemon.info hostapd: wlan0: STA e0:ca:94:cb:0c:a0 RADIUS: starting accounting session 59AE20BC-00000000
Tue Sep  5 11:59:13 2017 daemon.warn odhcpd[2418]: DHCPV6 SOLICIT IA_NA from 000100011fc08f1c8c736eb86e7c on br-lan: ok fdff:d2a8:7075::763/128
Tue Sep  5 11:59:16 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:59:21 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:59:26 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:59:31 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:59:36 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:59:41 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:59:46 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:59:51 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 11:59:56 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 12:00:01 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 12:00:06 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 12:00:11 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 12:00:16 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 12:00:21 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 12:00:26 2017 daemon.notice easycwmpd: add event '2 PERIODIC'
Tue Sep  5 12:00:26 2017 daemon.notice easycwmpd: start session
Tue Sep  5 12:00:26 2017 daemon.notice easycwmpd: configured acs url http://192.168.1.110:8080/openacs/acs
Tue Sep  5 12:00:26 2017 daemon.notice easycwmpd: external script init
Tue Sep  5 12:00:26 2017 daemon.notice easycwmpd: external: execute inform parameter
Tue Sep  5 12:00:26 2017 daemon.notice easycwmpd: send Inform
Tue Sep  5 12:00:26 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 12:00:29 2017 daemon.notice easycwmpd: LibCurl Error: Failed to connect to 192.168.1.110 port 8080: No route to host
Tue Sep  5 12:00:29 2017 daemon.notice easycwmpd: sending http message failed
Tue Sep  5 12:00:29 2017 daemon.notice easycwmpd: sending Inform failed
Tue Sep  5 12:00:29 2017 daemon.notice easycwmpd: external: execute apply service
Tue Sep  5 12:00:29 2017 daemon.notice easycwmpd: external script exit
Tue Sep  5 12:00:29 2017 daemon.notice easycwmpd: end session failed
Tue Sep  5 12:00:29 2017 daemon.notice easycwmpd: retry session in 3840 sec, RetryCount = 13
Tue Sep  5 12:00:31 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 12:00:36 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 12:00:41 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 12:00:46 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 12:00:51 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 12:00:56 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 12:01:01 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 12:01:06 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 12:01:11 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 12:01:16 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 12:01:21 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 12:01:26 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 12:01:31 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 12:01:36 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 12:01:41 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 12:01:45 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Tue Sep  5 12:02:06 2017 daemon.notice easycwmpd: add event '2 PERIODIC'
Tue Sep  5 12:02:06 2017 daemon.notice easycwmpd: start session
Tue Sep  5 12:02:06 2017 daemon.notice easycwmpd: configured acs url http://192.168.1.110:8080/openacs/acs
Tue Sep  5 12:02:06 2017 daemon.notice easycwmpd: external script init
Tue Sep  5 12:02:06 2017 daemon.notice easycwmpd: external: execute inform parameter
Tue Sep  5 12:02:06 2017 daemon.notice easycwmpd: send Inform
Tue Sep  5 12:02:09 2017 daemon.notice easycwmpd: LibCurl Error: Failed to connect to 192.168.1.110 port 8080: No route to host
Tue Sep  5 12:02:09 2017 daemon.notice easycwmpd: sending http message failed
Tue Sep  5 12:02:09 2017 daemon.notice easycwmpd: sending Inform failed
Tue Sep  5 12:02:09 2017 daemon.notice easycwmpd: external: execute apply service
Tue Sep  5 12:02:09 2017 daemon.notice easycwmpd: external script exit
Tue Sep  5 12:02:09 2017 daemon.notice easycwmpd: end session failed
Tue Sep  5 12:02:09 2017 daemon.notice easycwmpd: retry session in 3840 sec, RetryCount = 14

l***

向大家汇报进展，最新的发现：
把LAN接口绑定到eth0的时候，LAN接口就能自动分配内网IP地址，但WAN接口无法获取外网IP地址。。所有的网口包括WAN口，此时都表现LAN口的特性，也就是和电脑连接，会自动分配内网IP地址。

把WAN接口绑定到eth0的时候，WAN接口就能获取外网IP地址，但LAN接口无法自动分配内网IP地址。。
所有的网口包括LAN口，此时都表现WAN口的特性，也就是和上级路由连接，会获取外网IP地址。

LAN或WAN口绑定到eth1或eth0.1，eth0.2等，均无法获得或者分配IP地址。。。只有eth0可以。。

l***

现在认为问题出在vlan这里，vlan不知什么原因不能启用，交换机无法连接。。。

l***

报告大家，我的问题已经解决了。是代码中我把marvell写成marvel导致。

flexy***

lce 发表于 2017-9-7 19:42
报告大家，我的问题已经解决了。是代码中我把marvell写成marvel导致。

你的编译的LEDE完成 了没 ？搞完了分享给我用用呗。

l***

flexyangjie 发表于 2017-10-4 17:51
你的编译的LEDE完成 了没 ？搞完了分享给我用用呗。

下载链接已放在一楼

flexy***

lce 发表于 2017-10-7 19:54
下载链接已放在一楼

好，感谢分享。。。。。马上安排测试

wg***

楼主，能不能把patch文件发一下，想用L大神的LEDE源码自己编译一下，谢谢了