求助 网件R6220显示LuCI - Lua Configuration Interface

zhang***

1、按照帖子[url=https://www.right.com.cn/forum/forum.php?mod=viewthread&tid=208580&highlight=6220[7.25]https://www.right.com.cn/forum/forum.php?mod=viewthread&tid=208580&highlight=6220[/url][url=https://www.right.com.cn/forum/forum.php?mod=viewthread&tid=208580&highlight=6220[7.25][url=https://www.right.com.cn/forum/forum.php?mod=viewthread&tid=208580&highlight=6220[7.25][7.25[/url]更新FAQ] 网件R6220已经适配潘多拉和 LEDE (Openwrt) 附不拆机刷方法和固件[/url] ；刷了LEDE；可以进去。
2、操作失误，在LEDE更新固件里面直接刷入pb-boot；
3、路由有时候无限重启，捅屁眼恢复后，192.168.1.1能进入显示LuCI - Lua Configuration Interface ；
4、过段时候就无法显示，ping不通。
该怎么办，是不是砖了？

zhang***

z自己顶 有么有人能帮我解决的？ 千兆 丢了可惜了

zhang***

自己摸索搞定。
1、在度娘下载WinPcap，安装到电脑上面；
2、再下载Nmrpflash网件路由器救砖修复工具通用版0.9.11支持win10；
3、继续在网件官网下载最新的R6220固件R6220_V1.1.0.50_1.0.1.img
4、将Nmrpflash和R6220_V1.1.0.50_1.0.1.img拷贝到你的电脑的D盘根目录；
5、R6220关电源捅屁眼开机持续捅10S以上，松开。设置电脑IP地址192.168.1.2-254
6、电脑管理员模式运行CMD，输入D：
7、输入nmrpflash.exe -i net0 -a 192.168.1.1 -f R6220_V1.1.0.50_1.0.1.img(注，有多个网卡时，可能需要nat0换成net1...)
8、如果提示No response after 60 seconds. Bailing out.则重启路由器，在电脑端看到本地连接已连接，迅速键入7条那句话，后续将出现
Advertising NMRP server on net1 ... -
Received configuration request from a0:63:
Sending configuration: 192.168.1.1, netmas
Received upload request with empty filenam
Uploading R6220.img ... OK
Waiting for remote to respond.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Received keep-alive request.
Remote finished. Closing connection.
Reboot your device now.

表示救砖成功，重启路由即可进入熟悉的画面。

wxi***

我也遇到这个问题了，我感觉是端口占用问题，目前不太会排除。暂时解决方法是重启路由器 就可以