求救 又一wr941n v2返回原厂时刷砖

3438***

昨晚有好几个兄弟跟我一样 再刷了openwrt-ar71xx-tl-wr941nd-v2-squashfs-sysupgrade.bin固件后恢复原厂时挂掉

今早上没死将ttl线接上能看到启动信息 但按别的兄弟刷机时却停止不动
这是opwnwrt官方介绍的方法
ar7100> setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1
ar7100> tftp 0x80800000 openwrt-ar71xx-tl-wr941ndv2-squashfs.uni
ar7100> erase 0xbf020000 +0x3c0000
ar7100> cp.b 0x80800000 0xbf020000 0x3c0000
ar7100> reset



我的超级终端启动显示U-Boot 1.1.4 (May  1 2008 - 19:25:20)

AP81 (ar7100) U-boot
DRAM:
sri
32 MB
id read 0x100000ff
flash size 8MB, sector count = 128
Flash:  8 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag7100_enet_initialize...
Fetching MAC Address from 0x81fef230
eth0: 00:03:7f:e0:01:d2
eth0 up
eth0
Autobooting in 1 seconds, press "tp" to stop
ar7100>




能按tp停止 但不能上传固件 电脑ip为192.168.1.254  tftp地址为192.168.1.1




utobooting in 1 seconds, press "tp" to stop
ar7100> setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1
ar7100> tftp 0x80800000 wr941nv2_cn_3_9_3_up_boot(090803).bin
set link to 100M full by lqm.
dup 1 speed 100
Using eth0 device
TFTP from server 192.168.1.254; our IP address is 192.168.1.1
Filename 'wr941nv2_cn_3_9_3_up_boot(090803).bin'.
Load address: 0x80800000
Loading: T T T T T T T T T T
Retry count exceeded; starting again
set link to 100M full by lqm.
Using eth0 device
TFTP from server 192.168.1.254; our IP address is 192.168.1.1
Filename 'wr941nv2_cn_3_9_3_up_boot(090803).bin'.
Load address: 0x80800000
Loading: T T T T T T T T T T
Retry count exceeded; starting again
set link to 100M full by lqm.
Using eth0 device
TFTP from server 192.168.1.254; our IP address is 192.168.1.1
Filename 'wr941nv2_cn_3_9_3_up_boot(090803).bin'.
Load address: 0x80800000
Loading: T T T T

求大家帮助 看看那里不对

7296***

路过...我的刷成砖后直接返厂了

3438***

2# 729650915


可惜我这个质保过的时间太长了  只能折腾了

wzyw***

https://www.right.com.cn/forum/v ... 8&highlight=941 这个帖子中作者用的是081113版本的固件 你可以试着联系下作者 个人建议用思科的那个tftp工具