|
引导不起来
CFE version 6.30.163.2002 (r382208) based on BBP 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Sun Dec 31 21:10:50 CST 2023 (root@afeng11)
Copyright (C) 2000-2008 Broadcom Corporation.
Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
Found an ST compatible serial flash with 256 64KB blocks; total size 16MB
bcm_robo_enable_switch: EEE is disabled
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.163.2002 (r382208)
CPU type 0x19749: 600MHz
Tot mem: 131072 KBytes
CFE mem: 0x80700000 - 0x8095F130 (2486576)
Data: 0x80738770 - 0x8073BE00 (13968)
BSS: 0x8073BE00 - 0x8075D130 (135984)
Heap: 0x8075D130 - 0x8095D130 (2097152)
Stack: 0x8095D130 - 0x8095F130 (8192)
Text: 0x80700000 - 0x80738768 (231272)
Device eth0: hwaddr 00-22-15-A5-03-00, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
boot the image...
Loader:raw Filesys:tftp Dev:eth0 File:: Optionsnull)
Loading: TFTP Server.
Failed.
Could not load :: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: ...... 3404660 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
start_kernel
Linux version 2.6.22.19 (root@ubuntu) (gcc version 4.2.3) #12 Thu Mar 16 22:44:54 CST 2023
CPU revision is: 00019749
Found an ST compatible serial flash with 256 64KB blocks; total size 16MB
Determined physical RAM map:
memory: 07fff000 @ 00000000 (usable)
memory: 08000000 @ 87fff000 (usable)
Built 1 zonelists. Total pages: 585216
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 2048 (order: 11, 8192 bytes)
CPU: BCM5300 rev 1 pkg 0 at 600 MHz
Using 300.000 MHz high precision timer.
console [ttyS0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 238608k/131068k available (2611k kernel code, 22664k reserved, 516k data, 196k init, 131072k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Initializing host
PCI: Reset RC
PCI: Initializing host
PCI: Reset RC
PCI: Fixing up bus 0
PCI/PCIe coreunit 1 is set to bus 1.
PCI: Fixing up bridge
PCI: Fixing up bridge
PCI: Enabling device 0000:01:00.1 (0004 -> 0006)
PCI: Fixing up bus 1
PCI/PCIe coreunit 0 is set to bus 2.
PCI: Fixing up bridge
PCI: Fixing up bridge
PCI: Enabling device 0000:02:00.1 (0004 -> 0006)
PCI: Fixing up bus 2
NET: Registered protocol family 2
Time: MIPS clocksource has been installed.
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
highmem bounce pool size: 64 pages
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
io scheduler noop registered (default)
HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0xb8000300 (irq = 8) is a 16550A
serial8250: ttyS1 at MMIO 0xb8000400 (irq = 8) is a 16550A
PPP generic driver version 2.4.2
MPPE/MPPC encryption/compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V0.18.3
p p t p driver version 0.8.5
pflash: found no supported devices
Creating 5 MTD partitions on "sflash":
0x00000000-0x00040000 : "pmon"
0x00040000-0x00ff0000 : "linux"
0x00176ac8-0x00f50000 : "rootfs"
0x00ff0000-0x01000000 : "nvram"
0x00f70000-0x00ff0000 : "jffs2"
dev_nvram_init: _nvram_init
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
u32 classifier
OLD policer on
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (2048 buckets, 16384 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
net/ipv4/netfilter/tomato_ct.c [Mar 16 2023 22:44:48]
ipt_account 0.1.21 : Piotr Gasidlo <quaker@barbara.eu.org>, http://code.google.com/p/ipt-account/
NET: Registered protocol family 1
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 196k freed
Warning: unable to open an initial console.
Algorithmics/MIPS FPU Emulator v1.5
1: set_action 0
firmware version: 3.0.0.4.380.70_0
[1 init:init_nvram +5] init_nvram for model(40)
############################ unknown model #################################
num_of_mssid_support(0x0088): [mssid] support [0] mssid
ctf: module license 'Proprietary' taints kernel.
et_module_init: passivemode set to 0x0
et_module_init: et_txq_thresh set to 0xce4
bcm_robo_enable_switch: EEE is disabled
hotplug net INTERFACE=eth0 ACTION=add
eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.163.2002 (r382208)
set_wltxpower(0x01d0): [rc] no Power Control on this model
hotplug net INTERFACE=eth0 ACTION=add
wl_module_init: passivemode set to 0x0
PCI: Enabling device 0000:01:01.0 (0000 -> 0002)
hotplug net INTERFACE=eth1 ACTION=add
eth1: Broadcom BCM4331 802.11 Wireless Controller 6.30.163.2002 (r382208)
PCI: Enabling device 0000:02:01.0 (0000 -> 0002)
hotplug net INTERFACE=eth2 ACTION=add
eth2: Broadcom BCM43a2 802.11 Wireless Controller 6.30.163.2002 (r382208)
hotplug net INTERFACE=eth1 ACTION=add
hotplug net INTERFACE=eth2 ACTION=add
1: check_action 0
start jffs2: 4, 524288
/ # start_logger:
_ifconfig: name=eth0 flags=1043 IFUP addr=(null) netmask=(null)
hotplug net INTERFACE=vlan1 ACTION=add
hotplug net INTERFACE=vlan2 ACTION=add
hotplug net INTERFACE=vlan1 ACTION=add
update_lan_state(lan_, 0, 0)
[1 init:start_dnsmasq +8] begin
[1 init:stop_dnsmasq +8] begin
[1 init:stop_dnsmasq +8] end
hotplug net INTERFACE=vlan2 ACTION=add
[1 init:start_dnsmasq +9] end
start_lan_port(0) 1
TZ watchdog
decomp: fname=/var/lib/misc/rstats-speed.gz
decomp: gzip -dc /var/lib/misc/rstats-speed.gz > /var/tmp/rstats-uncomp != 0
load: speed_count = 0
load: read source= save_path=
load_history: fname=/var/lib/misc/rstats-history.gz
decomp: fname=/var/lib/misc/rstats-history.gz
decomp: gzip -dc /var/lib/misc/rstats-history.gz > /var/tmp/rstats-uncomp != 0
decomp: fname=/var/lib/misc/rstats-history.gz
illegal, cannot enable DualWAN
decomp: gzip -dc /var/lib/misc/rstats-history.gz > /var/tmp/rstats-uncomp != 0
load_history: load failed
start_wan: start_wan_if(0)!
[1 init:start_wan_if +10] unit=0.
update_wan_state(wan0_, 0, 0)
convert_wan_nvram(wan0_)
start_usb
NTFS (with native replay) support included
optimized: speed
Build_for__asus_n66u_2011-10-27_U86_r187446_b122
usb hotplug INTERFACE=(null) ACTION=add USBPORT=(null) HOST=(null) DEVICE=(null)
usb hotplug INTERFACE=9/0/0 ACTION=add USBPORT=(null) HOST=(null) DEVICE=(null)
330: check_action 0
checking for user scripts: '.usbhotplug'
usb hotplug INTERFACE=(null) ACTION=add USBPORT=(null) HOST=(null) DEVICE=(null)
usb hotplug INTERFACE=9/0/0 ACTION=add USBPORT=(null) HOST=(null) DEVICE=(null)
343: check_action 0
checking for user scripts: '.usbhotplug'
[1 init:init_main +13] recv signal 14 from pid [1:/sbin/init] (from user)
[1 init:init_main +28] recv signal 14 from pid [1:/sbin/init] (from user)
<rc_service> [i:watchdog] 241:notify_rc stop_httpd241: check_action 0
241: set_action 7
[1 init:init_main +39] recv signal 16 from pid [241:watchdog] (from user)
cmd[0]=stop_httpd
[1 init:handle_notifications +39] running: 1 httpd
handle_notifications() end
241: set_action 0
<rc_service> [i:watchdog] 241:notify_rc start_httpd[1 init:init_main +42] recv signal 16 from pid [241:watchdog] (from user)
cmd[0]=start_httpd
[1 init:handle_notifications +42] running: 2 httpd
handle_notifications() end
[1 init:init_main +42] recv signal 14 from pid [1:/sbin/init] (from user)
<rc_service> [i:watchdog] 241:notify_rc stop_httpd241: check_action 0
241: set_action 7
[1 init:init_main +71] recv signal 16 from pid [241:watchdog] (from user)
cmd[0]=stop_httpd
[1 init:handle_notifications +71] running: 1 httpd
handle_notifications() end
241: set_action 0
<rc_service> [i:watchdog] 241:notify_rc start_httpd[1 init:init_main +74] recv signal 16 from pid [241:watchdog] (from user)
cmd[0]=start_httpd
[1 init:handle_notifications +74] running: 2 httpd
handle_notifications() end
[1 init:init_main +74] recv signal 14 from pid [1:/sbin/init] (from user)
<rc_service> [i:watchdog] 241:notify_rc stop_httpd241: check_action 0
241: set_action 7
[1 init:init_main +103] recv signal 16 from pid [241:watchdog] (from user)
cmd[0]=stop_httpd
[1 init:handle_notifications +103] running: 1 httpd
handle_notifications() end
241: set_action 0
<rc_service> [i:watchdog] 241:notify_rc start_httpd[1 init:init_main +106] recv signal 16 from pid [241:watchdog] (from user)
cmd[0]=start_httpd
[1 init:handle_notifications +106] running: 2 httpd
handle_notifications() end
[1 init:init_main +106] recv signal 14 from pid [1:/sbin/init] (from user)
<rc_service> [i:watchdog] 241:notify_rc stop_httpd241: check_action 0
241: set_action 7
[1 init:init_main +135] recv signal 16 from pid [241:watchdog] (from user)
cmd[0]=stop_httpd
[1 init:handle_notifications +135] running: 1 httpd
handle_notifications() end
241: set_action 0
<rc_service> [i:watchdog] 241:notify_rc start_httpd[1 init:init_main +138] recv signal 16 from pid [241:watchdog] (from user)
cmd[0]=start_httpd
[1 init:handle_notifications +138] running: 2 httpd
handle_notifications() end
[1 init:init_main +138] recv signal 14 from pid [1:/sbin/init] (from user)
<rc_service> [i:watchdog] 241:notify_rc stop_httpd241: check_action 0
241: set_action 7
[1 init:init_main +167] recv signal 16 from pid [241:watchdog] (from user)
cmd[0]=stop_httpd
[1 init:handle_notifications +167] running: 1 httpd
handle_notifications() end
241: set_action 0
<rc_service> [i:watchdog] 241:notify_rc start_httpd[1 init:init_main +170] recv signal 16 from pid [241:watchdog] (from user)
cmd[0]=start_httpd
[1 init:handle_notifications +170] running: 2 httpd
handle_notifications() end
[1 init:init_main +170] recv signal 14 from pid [1:/sbin/init] (from user)
<rc_service> [i:watchdog] 241:notify_rc stop_httpd241: check_action 0
241: set_action 7
[1 init:init_main +199] recv signal 16 from pid [241:watchdog] (from user)
cmd[0]=stop_httpd
[1 init:handle_notifications +199] running: 1 httpd
handle_notifications() end
241: set_action 0
<rc_service> [i:watchdog] 241:notify_rc start_httpd[1 init:init_main +202] recv signal 16 from pid [241:watchdog] (from user)
cmd[0]=start_httpd
[1 init:handle_notifications +202] running: 2 httpd
handle_notifications() end
[1 init:init_main +202] recv signal 14 from pid [1:/sbin/init] (from user)
/ #
/ #
/ #
/ # ifconfig
eth0 Link encap:Ethernet HWaddr 00:22:15:A5:03:00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:997 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:86759 (84.7 KiB) TX bytes:0 (0.0 B)
Interrupt:4 Base address:0x2000
|
|