请指点LEDE 内核报“UBIFS error：ubifs_decompress 错误重启怎么办？

sun***

给Netgear R7800自编译了LEDE，添加了smartdns和openclash。编译后先刷纯LEDE然后固件升级自己的*sysupgrade.bin文件。（直接刷*factory.img能传入但机器就不装无奈）

这几个月学编译咋回事花了好大劲，终于编出来了看来还没完，比较小白，超出能力想来求教一下.....谢谢各位帮助



问题发生在新装好系统，配置smartdns和openclash过程中，路由会突然跳掉重启。内核日志中同样的错误会发生好几次，差不多的开头如下：

1. [   81.353593] UBIFS error (ubi0:1 pid 5745): ubifs_decompress: cannot decompress 442 bytes, compressor zstd, error -22
   
2. [   81.353641] UBIFS error (ubi0:1 pid 5745): do_readpage: bad data node (block 0, inode 458)
   
3. [   81.363180]         magic          0x6101831
   
4. [   81.371336]         crc            0xfab9770e
   
5. [   81.375049]         node_type      1 (data node)
   
6. [   81.378623]         group_type     0 (no node group)
   
7. [   81.382702]         sqnum          10536
   
8. [   81.387107]         len            490
   
9. [   81.390578]         key            (458, data, 0)
   
10. [   81.393357]         size           4096
    
11. [   81.397460]         compr_typ      3
    
12. [   81.400843]         data size      442

复制代码

实在百度不出这可恶的UBIFS是个啥！

已下为内核日志全文，场景为跳掉自己重启后 第一时间去看内核日志：
（字数不够了，19秒后的放在2楼，第一次error从81.353593开始）

1. [    0.000000] Booting Linux on physical CPU 0x0
   
2. [    0.000000] Linux version 5.4.231 (sysnk@sysnk-ThinkPad-T480s) (gcc version 11.3.0 (OpenWrt GCC 11.3.0 r5765-9047ec70f)) #0 SMP Mon Feb 27 02:26:58 2023
   
3. [    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
   
4. [    0.000000] CPU: div instructions available: patching division code
   
5. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
   
6. [    0.000000] OF: fdt: Machine model: Netgear Nighthawk X4S R7800
   
7. [    0.000000] Memory policy: Data cache writealloc
   
8. [    0.000000] On node 0 totalpages: 122880
   
9. [    0.000000]   Normal zone: 1080 pages used for memmap
   
10. [    0.000000]   Normal zone: 0 pages reserved
    
11. [    0.000000]   Normal zone: 122880 pages, LIFO batch:31
    
12. [    0.000000] percpu: Embedded 15 pages/cpu s30348 r8192 d22900 u61440
    
13. [    0.000000] pcpu-alloc: s30348 r8192 d22900 u61440 alloc=15*4096
    
14. [    0.000000] pcpu-alloc: [0] 0 [0] 1
    
15. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 121800
    
16. [    0.000000] Kernel command line:
    
17. [    0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8
    
18. [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
    
19. [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
    
20. [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
    
21. [    0.000000] Memory: 474824K/491520K available (6448K kernel code, 198K rwdata, 1552K rodata, 1024K init, 231K bss, 16696K reserved, 0K cma-reserved, 0K highmem)
    
22. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    
23. [    0.000000] rcu: Hierarchical RCU implementation.
    
24. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
    
25. [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
    
26. [    0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
    
27. [    0.000006] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
    
28. [    0.000019] Switching to timer-based delay loop, resolution 160ns
    
29. [    0.000328] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
    
30. [    0.000348] pid_max: default: 32768 minimum: 301
    
31. [    0.000532] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
    
32. [    0.000550] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
    
33. [    0.001594] CPU: Testing write buffer coherency: ok
    
34. [    0.002873] Setting up static identity map for 0x42300000 - 0x42300060
    
35. [    0.003067] rcu: Hierarchical SRCU implementation.
    
36. [    0.003630] smp: Bringing up secondary CPUs ...
    
37. [    0.005651] smp: Brought up 1 node, 2 CPUs
    
38. [    0.005667] SMP: Total of 2 processors activated (25.00 BogoMIPS).
    
39. [    0.005676] CPU: All CPU(s) started in SVC mode.
    
40. [    0.018009] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
    
41. [    0.018154] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    
42. [    0.018182] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
    
43. [    0.018314] pinctrl core: initialized pinctrl subsystem
    
44. [    0.019934] NET: Registered protocol family 16
    
45. [    0.020235] DMA: preallocated 256 KiB pool for atomic coherent allocations
    
46. [    0.021695] cpuidle: using governor ladder
    
47. [    0.021759] cpuidle: using governor menu
    
48. [    0.057827] usbcore: registered new interface driver usbfs
    
49. [    0.057911] usbcore: registered new interface driver hub
    
50. [    0.057980] usbcore: registered new device driver usb
    
51. [    0.058041] pps_core: LinuxPPS API ver. 1 registered
    
52. [    0.058052] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    
53. [    0.058082] PTP clock support registered
    
54. [    0.058902] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
    
55. [    0.060077] clocksource: Switched to clocksource dg_timer
    
56. [    0.060917] thermal_sys: Registered thermal governor 'step_wise'
    
57. [    0.063447] NET: Registered protocol family 2
    
58. [    0.063674] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
    
59. [    0.064626] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
    
60. [    0.064671] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
    
61. [    0.064707] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
    
62. [    0.064760] TCP: Hash tables configured (established 4096 bind 4096)
    
63. [    0.064854] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
    
64. [    0.064885] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
    
65. [    0.065163] NET: Registered protocol family 1
    
66. [    0.065210] PCI: CLS 0 bytes, default 64
    
67. [    0.066520] workingset: timestamp_bits=14 max_order=17 bucket_order=3
    
68. [    0.073263] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    
69. [    0.073276] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
    
70. [    0.113639] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator
    
71. [    0.113788] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator
    
72. [    0.113902] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator
    
73. [    0.114171] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges:
    
74. [    0.114196] qcom-pcie 1b500000.pci: Parsing ranges property...
    
75. [    0.114241] qcom-pcie 1b500000.pci:    IO 0x0fe00000..0x0fefffff -> 0x0fe00000
    
76. [    0.114276] qcom-pcie 1b500000.pci:   MEM 0x08000000..0x0fdfffff -> 0x08000000
    
77. [    0.335749] qcom-pcie 1b500000.pci: Link up
    
78. [    0.335923] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
    
79. [    0.335948] pci_bus 0000:00: root bus resource [bus 00-ff]
    
80. [    0.335966] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
    
81. [    0.335983] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
    
82. [    0.336000] pci_bus 0000:00: scanning bus
    
83. [    0.336046] pci 0000:00:00.0: [17cb:0101] type 01 class 0xff0000
    
84. [    0.336218] pci 0000:00:00.0: supports D1
    
85. [    0.336233] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
    
86. [    0.336251] pci 0000:00:00.0: PME# disabled
    
87. [    0.340541] pci_bus 0000:00: fixups for bus
    
88. [    0.340565] PCI: bus0: Fast back to back transfers disabled
    
89. [    0.340583] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
    
90. [    0.340722] pci_bus 0000:01: scanning bus
    
91. [    0.340903] pci 0000:01:00.0: [168c:0046] type 00 class 0x028000
    
92. [    0.341258] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
    
93. [    0.342405] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
    
94. [    0.342451] pci 0000:01:00.0: PME# disabled
    
95. [    0.346824] pci_bus 0000:01: fixups for bus
    
96. [    0.346895] PCI: bus1: Fast back to back transfers disabled
    
97. [    0.346913] pci_bus 0000:01: bus scan returning with max=01
    
98. [    0.346930] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
    
99. [    0.346946] pci_bus 0000:00: bus scan returning with max=ff
    
100. [    0.346979] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
     
101. [    0.347001] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
     
102. [    0.347128] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
     
103. [    0.347152] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x081fffff]
     
104. [    0.347356] pcieport 0000:00:00.0: assign IRQ: got 39
     
105. [    0.347968] pcieport 0000:00:00.0: AER: enabled with IRQ 40
     
106. [    0.348557] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator
     
107. [    0.348693] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator
     
108. [    0.348826] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator
     
109. [    0.349079] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges:
     
110. [    0.349100] qcom-pcie 1b700000.pci: Parsing ranges property...
     
111. [    0.349141] qcom-pcie 1b700000.pci:    IO 0x31e00000..0x31efffff -> 0x31e00000
     
112. [    0.349172] qcom-pcie 1b700000.pci:   MEM 0x2e000000..0x31dfffff -> 0x2e000000
     
113. [    0.577453] qcom-pcie 1b700000.pci: Link up
     
114. [    0.577608] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
     
115. [    0.577627] pci_bus 0001:00: root bus resource [bus 00-ff]
     
116. [    0.577643] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
     
117. [    0.577656] pci_bus 0001:00: scanning bus
     
118. [    0.577699] pci 0001:00:00.0: [17cb:0101] type 01 class 0xff0000
     
119. [    0.577846] pci 0001:00:00.0: supports D1
     
120. [    0.577860] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
     
121. [    0.577877] pci 0001:00:00.0: PME# disabled
     
122. [    0.582125] pci_bus 0001:00: fixups for bus
     
123. [    0.582145] PCI: bus0: Fast back to back transfers disabled
     
124. [    0.582162] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
     
125. [    0.582289] pci_bus 0001:01: scanning bus
     
126. [    0.582482] pci 0001:01:00.0: [168c:0046] type 00 class 0x028000
     
127. [    0.582861] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
     
128. [    0.584094] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
     
129. [    0.584142] pci 0001:01:00.0: PME# disabled
     
130. [    0.584397] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0001:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
     
131. [    0.588580] pci_bus 0001:01: fixups for bus
     
132. [    0.588656] PCI: bus1: Fast back to back transfers disabled
     
133. [    0.588670] pci_bus 0001:01: bus scan returning with max=01
     
134. [    0.588686] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
     
135. [    0.588702] pci_bus 0001:00: bus scan returning with max=ff
     
136. [    0.588729] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
     
137. [    0.588752] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
     
138. [    0.588884] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
     
139. [    0.588904] pci 0001:00:00.0:   bridge window [mem 0x2e000000-0x2e1fffff]
     
140. [    0.589103] pcieport 0001:00:00.0: assign IRQ: got 41
     
141. [    0.589957] pcieport 0001:00:00.0: AER: enabled with IRQ 42
     
142. [    0.592801] L2 [url=home.php?mod=space&uid=162986]@[/url] QSB rate. Forcing new rate.
     
143. [    0.593025] L2 @ 384000 KHz
     
144. [    0.593208] CPU0 @ 800000 KHz
     
145. [    0.593221] CPU1 @ QSB rate. Forcing new rate.
     
146. [    0.593349] CPU1 @ 384000 KHz
     
147. [    0.597040] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
     
148. [    0.599338] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
     
149. [    0.600145] msm_serial 16340000.serial: msm_serial: detected port #0
     
150. [    0.600196] msm_serial 16340000.serial: uartclk = 7372800
     
151. [    0.600275] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 43, base_baud = 460800) is a MSM
     
152. [    0.600313] msm_serial: console setup on port #0
     
153. [    1.376312] printk: console [ttyMSM0] enabled
     
154. [    1.381335] msm_serial: driver initialized
     
155. [    1.390460] loop: module loaded
     
156. [    1.392024] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xa1
     
157. [    1.392412] nand: Macronix MX30UF1G18AC
     
158. [    1.399005] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
     
159. [    1.402760] 8 fixed-partitions partitions found on MTD device qcom_nand.0
     
160. [    1.410206] Creating 8 MTD partitions on "qcom_nand.0":
     
161. [    1.417158] 0x000000000000-0x000000c80000 : "qcadata"
     
162. [    1.443059] 0x000000c80000-0x000001180000 : "APPSBL"
     
163. [    1.452029] 0x000001180000-0x000001200000 : "APPSBLENV"
     
164. [    1.453760] 0x000001200000-0x000001340000 : "art"
     
165. [    1.458931] 0x000001340000-0x000001480000 : "artbak"
     
166. [    1.463887] 0x000001480000-0x000001880000 : "kernel"
     
167. [    1.473258] 0x000001880000-0x000007900000 : "ubi"
     
168. [    1.627268] 0x000007900000-0x000008000000 : "reserve"
     
169. [    1.656346] switch0: Atheros AR8337 rev. 2 switch registered on 37000000.mdio-mii
     
170. [    2.496717] ar8327: qca,phy-rgmii-en is not specified
     
171. [    2.497833] i2c /dev entries driver
     
172. [    2.504328] sdhci: Secure Digital Host Controller Interface driver
     
173. [    2.504360] sdhci: Copyright(c) Pierre Ossman
     
174. [    2.510297] sdhci-pltfm: SDHCI platform and OF driver helper
     
175. [    2.516522] NET: Registered protocol family 10
     
176. [    2.521829] Segment Routing with IPv6
     
177. [    2.524792] NET: Registered protocol family 17
     
178. [    2.528543] Bridge firewalling registered
     
179. [    2.533096] 8021q: 802.1Q VLAN Support v1.8
     
180. [    2.536900] Registering SWP/SWPB emulation handler
     
181. [    2.567633] qcom_rpm 108000.rpm: RPM firmware 3.0.16777364
     
182. [    2.581485] s1a: Bringing 0uV into 1050000-1050000uV
     
183. [    2.581758] s1a: supplied by regulator-dummy
     
184. [    2.585676] s1b: Bringing 0uV into 1050000-1050000uV
     
185. [    2.589968] s1b: supplied by regulator-dummy
     
186. [    2.594941] s2a: Bringing 0uV into 775000-775000uV
     
187. [    2.599175] s2a: supplied by regulator-dummy
     
188. [    2.603796] s2b: Bringing 0uV into 775000-775000uV
     
189. [    2.608211] s2b: supplied by regulator-dummy
     
190. [    2.624297] UBI: auto-attach mtd6
     
191. [    2.624318] ubi0: attaching mtd6
     
192. [    2.750483] random: crng init done
     
193. [    3.301572] ubi0: scanning is finished
     
194. [    3.311043] ubi0: attached mtd6 (name "ubi", size 96 MiB)
     
195. [    3.311061] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
     
196. [    3.315408] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
     
197. [    3.322255] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
     
198. [    3.329038] ubi0: good PEBs: 772, bad PEBs: 0, corrupted PEBs: 0
     
199. [    3.335873] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
     
200. [    3.342119] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1677236751
     
201. [    3.349094] ubi0: available PEBs: 0, total reserved PEBs: 772, PEBs reserved for bad PEB handling: 20
     
202. [    3.358505] ubi0: background thread "ubi_bgt0d" started, PID 67
     
203. [    3.359661] block ubiblock0_0: created from ubi0:0(rootfs)
     
204. [    3.373305] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
     
205. [    3.378781] hctosys: unable to open rtc device (rtc0)
     
206. [    3.389488] VFS: Mounted root (squashfs filesystem) readonly on device 259:0.
     
207. [    3.390105] Freeing unused kernel memory: 1024K
     
208. [    3.420783] Run /sbin/init as init process
     
209. [    5.214573] init: Console is alive
     
210. [    5.214817] init: - watchdog -
     
211. [    7.914345] kmodloader: loading kernel modules from /etc/modules-boot.d/*
     
212. [    7.966306] exfat: module is from the staging directory, the quality is unknown, you have been warned.
     
213. [    7.967167] exFAT: Version 1.3.0
     
214. [    7.988202] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
     
215. [    7.991224] SCSI subsystem initialized
     
216. [    7.997755] libata version 3.00 loaded.
     
217. [    8.000962] ahci 29000000.sata: 29000000.sata supply ahci not found, using dummy regulator
     
218. [    8.001100] ahci 29000000.sata: 29000000.sata supply phy not found, using dummy regulator
     
219. [    8.008228] ahci 29000000.sata: 29000000.sata supply target not found, using dummy regulator
     
220. [    8.017540] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
     
221. [    8.024990] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
     
222. [    8.030172] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
     
223. [    8.039745] scsi host0: ahci
     
224. [    8.047426] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 26
     
225. [    8.383120] ata1: SATA link down (SStatus 0 SControl 300)
     
226. [    8.387490] fsl-ehci: Freescale EHCI Host controller driver
     
227. [    8.388755] ehci-platform: EHCI generic platform driver
     
228. [    8.399906] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
     
229. [    8.400899] ohci-platform: OHCI generic platform driver
     
230. [    8.407777] dwc3-qcom 110f8800.usb3: IRQ hs_phy_irq not found
     
231. [    8.410100] dwc3-qcom 110f8800.usb3: IRQ dp_hs_phy_irq not found
     
232. [    8.416078] dwc3-qcom 110f8800.usb3: IRQ dm_hs_phy_irq not found
     
233. [    8.422164] dwc3-qcom 110f8800.usb3: IRQ ss_phy_irq not found
     
234. [    8.429909] dwc3-qcom 100f8800.usb3: IRQ hs_phy_irq not found
     
235. [    8.433787] dwc3-qcom 100f8800.usb3: IRQ dp_hs_phy_irq not found
     
236. [    8.439440] dwc3-qcom 100f8800.usb3: IRQ dm_hs_phy_irq not found
     
237. [    8.445605] dwc3-qcom 100f8800.usb3: IRQ ss_phy_irq not found
     
238. [    8.457323] dwc3 11000000.dwc3: Failed to get clk 'ref': -2
     
239. [    8.523210] dwc3 10000000.dwc3: Failed to get clk 'ref': -2
     
240. [    8.598386] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
     
241. [    8.598490] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
     
242. [    8.603183] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
     
243. [    8.610554] xhci-hcd xhci-hcd.0.auto: irq 47, io mem 0x11000000
     
244. [    8.620225] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
     
245. [    8.625754] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
     
246. [    8.631270] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
     
247. [    8.640068] hub 1-0:1.0: USB hub found
     
248. [    8.645504] hub 1-0:1.0: 1 port detected
     
249. [    8.649898] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
     
250. [    8.655414] hub 2-0:1.0: USB hub found
     
251. [    8.661530] hub 2-0:1.0: 1 port detected
     
252. [    8.665203] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
     
253. [    8.668850] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
     
254. [    8.674424] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
     
255. [    8.681809] xhci-hcd xhci-hcd.1.auto: irq 48, io mem 0x10000000
     
256. [    8.691388] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
     
257. [    8.696965] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
     
258. [    8.702611] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
     
259. [    8.710946] hub 3-0:1.0: USB hub found
     
260. [    8.716715] hub 3-0:1.0: 1 port detected
     
261. [    8.722634] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
     
262. [    8.724936] hub 4-0:1.0: USB hub found
     
263. [    8.732638] hub 4-0:1.0: 1 port detected
     
264. [    8.739091] usbcore: registered new interface driver usb-storage
     
265. [    8.741139] usbcore: registered new interface driver uas
     
266. [    8.746310] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
     
267. [    8.754225] init: - preinit -
     
268. [   18.275859] mount_root: loading kmods from internal overlay
     
269. [   18.319117] kmodloader: loading kernel modules from //etc/modules-boot.d/*
     
270. [   18.328266] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
     
271. [   18.702966] UBIFS (ubi0:1): Mounting in unauthenticated mode
     
272. [   18.703583] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 157
     
273. [   18.769273] UBIFS (ubi0:1): recovery needed
     
274. [   19.950457] UBIFS (ubi0:1): recovery completed
     
275. 
     

复制代码

sun***

1. [   19.950547] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
   
2. [   19.953787] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
   
3. [   19.961738] UBIFS (ubi0:1): FS size: 46346240 bytes (44 MiB, 365 LEBs), journal size 2285568 bytes (2 MiB, 18 LEBs)
   
4. [   19.971642] UBIFS (ubi0:1): reserved for root: 2189047 bytes (2137 KiB)
   
5. [   19.981889] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 0476B4B9-1A08-4AB2-940A-58F0F7EFA5AB, small LPT model
   
6. [   20.020605] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
   
7. [   20.240609] block: extroot: not configured
   
8. [   20.320480] UBIFS (ubi0:1): un-mount UBI device 0
   
9. [   20.349240] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
   
10. [   20.352853] UBIFS (ubi0:1): Mounting in unauthenticated mode
    
11. [   20.371642] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 158
    
12. [   20.675173] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
    
13. [   20.675204] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    
14. [   20.682061] UBIFS (ubi0:1): FS size: 46346240 bytes (44 MiB, 365 LEBs), journal size 2285568 bytes (2 MiB, 18 LEBs)
    
15. [   20.691947] UBIFS (ubi0:1): reserved for root: 2189047 bytes (2137 KiB)
    
16. [   20.702194] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 0476B4B9-1A08-4AB2-940A-58F0F7EFA5AB, small LPT model
    
17. [   20.713937] mount_root: loading kmods from internal overlay
    
18. [   20.775737] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
    
19. [   20.779055] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
    
20. [   20.845966] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
    
21. [   20.855126] block: extroot: not configured
    
22. [   20.860895] mount_root: switching to ubifs overlay
    
23. [   20.884408] urandom-seed: Seeding with /etc/urandom.seed
    
24. [   21.101846] procd: - early -
    
25. [   21.102177] procd: - watchdog -
    
26. [   21.945310] procd: - watchdog -
    
27. [   21.953863] procd: - ubus -
    
28. [   23.573305] procd: - init -
    
29. [   25.388956] kmodloader: loading kernel modules from /etc/modules.d/*
    
30. [   25.414423] urngd: v1.0.2 started.
    
31. [   25.454897] NET: Registered protocol family 38
    
32. [   25.465848] ntfs3: Max link count 4000
    
33. [   25.465867] ntfs3: Enabled Linux POSIX ACLs support
    
34. [   25.468482] ntfs3: Read-only LZX/Xpress compression included
    
35. [   25.488897] NET: Registered protocol family 15
    
36. [   25.490089] Initializing XFRM netlink socket
    
37. [   25.501711] tun: Universal TUN/TAP device driver, 1.6
    
38. [   25.504022] **********************************************************
    
39. [   25.505734] * Driver    :NSS GMAC Driver - RTL v(3.72a)
    
40. [   25.512256] * Version   :1.0
    
41. [   25.517273] * Copyright :Copyright (c) 2013-2018 The Linux Foundation. All rights reserved.
    
42. [   25.520457] **********************************************************
    
43. [   25.677406] nss_driver - fw of size 536324  bytes copied to load addr: 40000000, nss_id : 0
    
44. [   25.677936] nss_driver - Turbo Support 1
    
45. [   25.684654] Supported Frequencies -
    
46. [   25.684656] 800Mhz
    
47. [   25.688720] 800Mhz
    
48. [   25.692345] 800Mhz
    
49. [   25.694098]
    
50. [   25.698461] 654f12c8: meminfo init succeed
    
51. [   25.713437] nss_driver - fw of size 218224  bytes copied to load addr: 40800000, nss_id : 1
    
52. [   25.713668] 3b05b573: meminfo init succeed
    
53. [   25.720729] debugfs: File 'n2h' in directory 'stats' already present!
    
54. [   25.724766] debugfs: File 'qrfs' in directory 'stats' already present!
    
55. [   25.731334] debugfs: File 'c2c_tx' in directory 'stats' already present!
    
56. [   25.737699] debugfs: File 'c2c_rx' in directory 'stats' already present!
    
57. [   25.744619] debugfs: File 'unaligned' in directory 'stats' already present!
    
58. [   25.757601] node size 1 # items 2
    
59. [   25.757917] memory: 0 0 (avl 487280640) items 2 active_cores 2
    
60. [   25.761487] 654f12c8: nss core 0 booted successfully
    
61. [   25.767299] node size 1 # items 2
    
62. [   25.772325] memory: 0 0 (avl 487280640) items 2 active_cores 2
    
63. [   25.775458] 3b05b573: nss core 1 booted successfully
    
64. [   25.840516] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
    
65. [   25.870070] cryptodev: driver 1.12 loaded.
    
66. [   25.875382] PPP generic driver version 2.4.2
    
67. [   25.876473] NET: Registered protocol family 24
    
68. [   25.887413] QCA multicast snooping installed successfully
    
69. [   25.895693] Loading modules backported from Linux version v5.15.33-0-g06f50ca83ace
    
70. [   25.895722] Backport generated by backports.git v5.15.33-1-0-g183c4ab2
    
71. [   25.920020] PPP MPPE Compression module registered
    
72. [   25.925576] usbcore: registered new interface driver ums-alauda
    
73. [   25.927257] usbcore: registered new interface driver ums-cypress
    
74. [   25.932227] usbcore: registered new interface driver ums-datafab
    
75. [   25.938449] usbcore: registered new interface driver ums-freecom
    
76. [   25.944376] usbcore: registered new interface driver ums-isd200
    
77. [   25.950695] usbcore: registered new interface driver ums-jumpshot
    
78. [   25.955887] usbcore: registered new interface driver ums-karma
    
79. [   25.962625] usbcore: registered new interface driver ums-sddr09
    
80. [   25.968003] usbcore: registered new interface driver ums-sddr55
    
81. [   25.974030] usbcore: registered new interface driver ums-usbat
    
82. [   25.994680] xt_time: kernel timezone is -0000
    
83. [   26.085946] ath10k_core: unknown parameter 'frame_mode' ignored
    
84. [   26.088163] ath10k_pci 0000:01:00.0: assign IRQ: got 39
    
85. [   26.088184] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x46.
    
86. [   26.091317] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
    
87. [   26.098889] ath10k_pci 0000:01:00.0: enabling bus mastering
    
88. [   26.099443] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
    
89. [   27.610070] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
    
90. [   27.610125] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
    
91. [   27.625350] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9984-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 7ea63dc5
    
92. [   29.940641] ath10k_pci 0000:01:00.0: Loading BDF type 0
    
93. [   29.957228] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:1 crc32 826c8c57
    
94. [   33.499337] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
    
95. [   33.499361] ath10k_pci 0000:01:00.0: msdu-desc: 2500  skid: 32
    
96. [   33.581345] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
    
97. [   33.582188] ath10k_pci 0000:01:00.0: wmi print 'free: 84920 iram: 13156 sram: 11224'
    
98. [   33.873773] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
    
99. [   33.972164] ath: EEPROM regdomain: 0x0
    
100. [   33.972176] ath: EEPROM indicates default country code should be used
     
101. [   33.972185] ath: doing EEPROM country->regdmn map search
     
102. [   33.972203] ath: country maps to regdmn code: 0x3a
     
103. [   33.972217] ath: Country alpha2 being used: US
     
104. [   33.972226] ath: Regpair used: 0x3a
     
105. [   33.981719] ath10k_pci 0001:01:00.0: assign IRQ: got 41
     
106. [   33.981768] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x46.
     
107. [   33.983697] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
     
108. [   33.988681] ath10k_pci 0001:01:00.0: enabling bus mastering
     
109. [   33.989399] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
     
110. [   35.624218] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
     
111. [   35.624276] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
     
112. [   35.639348] ath10k_pci 0001:01:00.0: firmware ver 10.4b-ct-9984-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 7ea63dc5
     
113. [   37.966933] ath10k_pci 0001:01:00.0: Loading BDF type 0
     
114. [   37.967594] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:2 crc32 826c8c57
     
115. [   41.535513] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
     
116. [   41.535538] ath10k_pci 0001:01:00.0: msdu-desc: 2500  skid: 32
     
117. [   41.619424] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
     
118. [   41.620281] ath10k_pci 0001:01:00.0: wmi print 'free: 84920 iram: 13156 sram: 11224'
     
119. [   42.046159] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
     
120. [   42.152206] ath: EEPROM regdomain: 0x0
     
121. [   42.152219] ath: EEPROM indicates default country code should be used
     
122. [   42.152231] ath: doing EEPROM country->regdmn map search
     
123. [   42.152251] ath: country maps to regdmn code: 0x3a
     
124. [   42.152264] ath: Country alpha2 being used: US
     
125. [   42.152274] ath: Regpair used: 0x3a
     
126. [   42.163675] kmodloader: done loading kernel modules from /etc/modules.d/*
     
127. [   46.403613] ECM init
     
128. [   46.403662] ECM database jhash random seed: 0x3859298a
     
129. [   46.480863] ECM init complete
     
130. [   49.663766] ipq8064-mdio 37000000.mdio eth1: 1000 Mbps Full Duplex
     
131. [   50.734279] br-lan: port 1(eth1.1) entered blocking state
     
132. [   50.734310] br-lan: port 1(eth1.1) entered disabled state
     
133. [   50.739225] device eth1.1 entered promiscuous mode
     
134. [   50.744144] device eth1 entered promiscuous mode
     
135. [   50.749323] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
     
136. [   50.753995] br-lan: port 1(eth1.1) entered blocking state
     
137. [   50.759490] br-lan: port 1(eth1.1) entered forwarding state
     
138. [   50.775836] ipq8064-mdio 37000000.mdio eth0: 1000 Mbps Full Duplex
     
139. [   51.855791] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
     
140. [   51.856025] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
     
141. [   52.793168] pppoe-wan: renamed from ppp0
     
142. [   59.325630] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
     
143. [   59.325657] ath10k_pci 0001:01:00.0: msdu-desc: 2500  skid: 32
     
144. [   59.409891] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
     
145. [   59.410768] ath10k_pci 0001:01:00.0: wmi print 'free: 84920 iram: 13156 sram: 11224'
     
146. [   59.927520] ath10k_pci 0001:01:00.0: rts threshold -1
     
147. [   59.927821] ath10k_pci 0001:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
     
148. [   59.980579] br-lan: port 2(wlan1) entered blocking state
     
149. [   59.980604] br-lan: port 2(wlan1) entered disabled state
     
150. [   59.985136] device wlan1 entered promiscuous mode
     
151. [   60.034630] ath10k_pci 0001:01:00.0: NOTE:  Firmware DBGLOG output disabled in debug_mask: 0x10000000
     
152. [   60.381760] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
     
153. [   60.381976] br-lan: port 2(wlan1) entered blocking state
     
154. [   60.387190] br-lan: port 2(wlan1) entered forwarding state
     
155. [   66.359144] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
     
156. [   66.359170] ath10k_pci 0000:01:00.0: msdu-desc: 2500  skid: 32
     
157. [   66.441165] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
     
158. [   66.441982] ath10k_pci 0000:01:00.0: wmi print 'free: 84920 iram: 13156 sram: 11224'
     
159. [   66.947055] ath10k_pci 0000:01:00.0: rts threshold -1
     
160. [   66.947493] ath10k_pci 0000:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
     
161. [   66.964378] br-lan: port 3(wlan0) entered blocking state
     
162. [   66.964402] br-lan: port 3(wlan0) entered disabled state
     
163. [   66.969083] device wlan0 entered promiscuous mode
     
164. [   67.566551] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
     
165. [   67.566739] br-lan: port 3(wlan0) entered blocking state
     
166. [   67.572056] br-lan: port 3(wlan0) entered forwarding state
     
167. [   81.353593] UBIFS error (ubi0:1 pid 5745): ubifs_decompress: cannot decompress 442 bytes, compressor zstd, error -22
     
168. [   81.353641] UBIFS error (ubi0:1 pid 5745): do_readpage: bad data node (block 0, inode 458)
     
169. [   81.363180]         magic          0x6101831
     
170. [   81.371336]         crc            0xfab9770e
     
171. [   81.375049]         node_type      1 (data node)
     
172. [   81.378623]         group_type     0 (no node group)
     
173. [   81.382702]         sqnum          10536
     
174. [   81.387107]         len            490
     
175. [   81.390578]         key            (458, data, 0)
     
176. [   81.393357]         size           4096
     
177. [   81.397460]         compr_typ      3
     
178. [   81.400843]         data size      442
     
179. [   81.403788]         data:
     
180. [   81.406664]         00000000: 28 b5 2f fd 00 50 8d 0d 00 c6 56 3c 1c 70 49 d8 00 99 51 66 44 0b f2 66 a2 cc f0 ff 5f af 7f f9
     
181. [   81.408755]         00000020: 15 59 91 f6 d3 7f af 20 02 3e 00 32 00 30 00 b7 a2 88 55 47 b2 18 fe ca bb 55 5d f7 02 94 11 04
     
182. [   81.419528]         00000040: 12 40 09 8b 20 78 65 04 2d 1c 07 26 81 06 0e a2 20 70 20 36 91 04 1a f8 e1 60 0f 04 25 10 08 0c
     
183. [   81.430192]         00000060: 02 4c c1 11 b0 03 c7 81 09 4a 2c 32 e0 ad e9 1c 5e 03 5b 53 53 0b 69 1b 4e b5 3b c6 46 39 44 c5
     
184. [   81.440889]         00000080: bd 92 b1 da 6d d7 ee 82 7b b7 8d 6d dd 2e 66 35 5c f6 4d 85 a2 e1 cf 6f 2a 4c 62 b9 2b 86 07 e8
     
185. [   81.451558]         000000a0: 05 bd 70 e1 72 cc 6e 79 b9 17 b4 97 fd 6d fe b4 c8 df ef 97 32 29 a6 6d eb be 19 7c 3b 65 5b 47
     
186. [   81.462211]         000000c0: 8f 19 33 9c 4e ea 65 22 9e bb f1 8d 35 a9 06 af c2 74 d3 37 c9 b8 31 cc 4d e7 4d 75 b9 b9 29 2d
     
187. [   81.472893]         000000e0: 9e 29 9f 75 4f d4 c7 4a 7c 2c f8 98 7c 34 3e 1a 7b c4 83 e5 88 77 54 3b a6 9d 1d 8f c7 6d a8 31
     
188. [   81.483581]         00000100: 38 4f d4 5a 92 24 0d 20 03 08 80 68 73 12 40 50 08 18 04 af 10 bc 42 c0 20 08 8b 01 e1 ee 0f 74
     
189. [   81.494230]         00000120: a5 61 42 44 88 84 23 02 ca bc 2b 07 70 c3 38 18 3b 1a 8d 2e 9c 6a 1b 53 04 65 8e 43 f3 29 a2 2d
     
190. [   81.504916]         00000140: 5e b6 81 fe e4 4a 3c 13 f9 4c 16 8c 75 9f 84 db 5b 69 61 fb d1 db 4a 48 c0 01 e7 2a 36 36 00 25
     
191. [   81.515609]         00000160: 94 fd ee 90 e6 76 fe d3 c9 1c 84 7f ea 82 94 3e 33 99 b5 ab 03 5a 94 b6 6c 48 ea c6 1a ad bd eb
     
192. [   81.526286]         00000180: 5d c2 71 77 aa b0 aa a0 cc d1 c4 c3 1a cd 17 75 57 8f b6 4c 7a 7d 25 5c 7d fb 96 4e 54 5d e1 f9
     
193. [   81.536973]         000001a0: 4d 12 57 73 1b f3 f0 d5 df 67 c9 a1 5b 7f 90 86 11 2f ba 9c f8 b3 67 4e 3d 1f
     
194. [   81.547635] UBIFS error (ubi0:1 pid 5745): do_readpage: cannot read page 0 of inode 458, error -22
     
195. [   81.557266] UBIFS error (ubi0:1 pid 5745): ubifs_decompress: cannot decompress 442 bytes, compressor zstd, error -22
     
196. [   81.565713] UBIFS error (ubi0:1 pid 5745): do_readpage: bad data node (block 0, inode 458)
     
197. [   81.576367]         magic          0x6101831
     
198. [   81.584438]         crc            0xfab9770e
     
199. [   81.588096]         node_type      1 (data node)
     
200. [   81.591741]         group_type     0 (no node group)
     
201. [   81.595889]         sqnum          10536
     
202. [   81.600157]         len            490
     
203. [   81.603517]         key            (458, data, 0)
     
204. [   81.606403]         size           4096
     
205. [   81.610582]         compr_typ      3
     
206. [   81.614052]         data size      442
     
207. [   81.616814]         data:
     
208. [   81.619771]         00000000: 28 b5 2f fd 00 50 8d 0d 00 c6 56 3c 1c 70 49 d8 00 99 51 66 44 0b f2 66 a2 cc f0 ff 5f af 7f f9
     
209. [   81.621863]         00000020: 15 59 91 f6 d3 7f af 20 02 3e 00 32 00 30 00 b7 a2 88 55 47 b2 18 fe ca bb 55 5d f7 02 94 11 04
     
210. [   81.632623]         00000040: 12 40 09 8b 20 78 65 04 2d 1c 07 26 81 06 0e a2 20 70 20 36 91 04 1a f8 e1 60 0f 04 25 10 08 0c
     
211. [   81.643307]         00000060: 02 4c c1 11 b0 03 c7 81 09 4a 2c 32 e0 ad e9 1c 5e 03 5b 53 53 0b 69 1b 4e b5 3b c6 46 39 44 c5
     
212. [   81.653960]         00000080: bd 92 b1 da 6d d7 ee 82 7b b7 8d 6d dd 2e 66 35 5c f6 4d 85 a2 e1 cf 6f 2a 4c 62 b9 2b 86 07 e8
     
213. [   81.664644]         000000a0: 05 bd 70 e1 72 cc 6e 79 b9 17 b4 97 fd 6d fe b4 c8 df ef 97 32 29 a6 6d eb be 19 7c 3b 65 5b 47
     
214. [   81.675328]         000000c0: 8f 19 33 9c 4e ea 65 22 9e bb f1 8d 35 a9 06 af c2 74 d3 37 c9 b8 31 cc 4d e7 4d 75 b9 b9 29 2d
     
215. [   81.685980]         000000e0: 9e 29 9f 75 4f d4 c7 4a 7c 2c f8 98 7c 34 3e 1a 7b c4 83 e5 88 77 54 3b a6 9d 1d 8f c7 6d a8 31
     
216. [   81.696665]         00000100: 38 4f d4 5a 92 24 0d 20 03 08 80 68 73 12 40 50 08 18 04 af 10 bc 42 c0 20 08 8b 01 e1 ee 0f 74
     
217. [   81.707348]         00000120: a5 61 42 44 88 84 23 02 ca bc 2b 07 70 c3 38 18 3b 1a 8d 2e 9c 6a 1b 53 04 65 8e 43 f3 29 a2 2d
     
218. [   81.718034]         00000140: 5e b6 81 fe e4 4a 3c 13 f9 4c 16 8c 75 9f 84 db 5b 69 61 fb d1 db 4a 48 c0 01 e7 2a 36 36 00 25
     
219. [   81.728685]         00000160: 94 fd ee 90 e6 76 fe d3 c9 1c 84 7f ea 82 94 3e 33 99 b5 ab 03 5a 94 b6 6c 48 ea c6 1a ad bd eb
     
220. [   81.739369]         00000180: 5d c2 71 77 aa b0 aa a0 cc d1 c4 c3 1a cd 17 75 57 8f b6 4c 7a 7d 25 5c 7d fb 96 4e 54 5d e1 f9
     
221. [   81.750054]         000001a0: 4d 12 57 73 1b f3 f0 d5 df 67 c9 a1 5b 7f 90 86 11 2f ba 9c f8 b3 67 4e 3d 1f
     
222. [   81.760746] UBIFS error (ubi0:1 pid 5745): do_readpage: cannot read page 0 of inode 458, error -22

复制代码

av***

内核崩溃很难查，你用op官方源码试试看？smartdns和openclash都可以自己添加的