ligo_
发表于 2017-7-2 04:25
长妈 发表于 2017-6-30 18:04
楼主我们学校的版本号是显示这样的,,,前面那一大堆空着的难道要加入空格x20吗?
默认不行吗?试试CH\x20V7.10-0310格式就是这样,我也不知道中间那个字符怎么来的。。。
jxq9571
发表于 2017-7-2 05:19
看看是啥:lol
长妈
发表于 2017-7-3 16:30
ligo_ 发表于 2017-7-2 04:25
默认不行吗?试试CH\x20V7.10-0310格式就是这样,我也不知道中间那个字符怎么来的。。。
那个E不用加是不?直接用CH\x20V7.10-0310,key用HuaWei3COM1X这个吗?
我怕又给黑名单了,借朋友的号来测试的,怕版本不对又把别人号弄黑名单了好尴尬:(
ligo_
发表于 2017-7-3 20:41
长妈 发表于 2017-7-3 16:30
那个E不用加是不?直接用CH\x20V7.10-0310,key用HuaWei3COM1X这个吗?
我怕又给黑名单了,借朋友的号来 ...
对,长度是固定的
422579979
发表于 2017-7-9 22:13
dalao请问下网件R6100能刷这个插件吗 我现在刷了op lede 目前系统版本LEDE Reboot 17.01.2
422579979
发表于 2017-7-9 23:05
root@LEDE:/tmp# opkg installnjit8021xclient_2.0_arm_cortex-a9.ipk
opkg: unknown sub-command installnjit8021xclient_2.0_arm_cortex-a9.ipk
usage: opkg sub-command
where sub-command is one of:
Package Manipulation:
update Update list of available packages
upgrade <pkgs> Upgrade packages
install <pkgs> Install package(s)
configure <pkgs> Configure unpacked package(s)
remove <pkgs|regexp> Remove package(s)
flag <flag> <pkgs> Flag package(s)
<flag>=hold|noprune|user|ok|installed|unpacked (one per invocation)
Informational Commands:
list List available packages
list-installed List installed packages
list-upgradable List installed and upgradable packages
list-changed-conffiles List user modified configuration files
files <pkg> List files belonging to <pkg>
search <file|regexp> List package providing <file>
find <regexp> List packages whose name or description matches <regexp>
info Display all info for <pkg>
status Display all status for <pkg>
download <pkg> Download <pkg> to current directory
compare-versions <v1> <op> <v2>
compare versions using <= < > >= = << >>
print-architecture List installable package architectures
depends [-A] +
whatdepends [-A] +
whatdependsrec [-A] +
whatrecommends[-A] +
whatsuggests[-A] +
whatprovides [-A] +
whatconflicts [-A] +
whatreplaces [-A] +
Options:
-A Query all packages not just those installed
-V[<level>] Set verbosity level to <level>.
--verbosity[=<level>] Verbosity levels:
0 errors only
1 normal messages (default)
2 informative messages
3 debug
4 debug level 2
-f <conf_file> Use <conf_file> as the opkg configuration file
--conf <conf_file>
--cache <directory> Use a package cache
-d <dest_name> Use <dest_name> as the the root directory for
--dest <dest_name> package installation, removal, upgrading.
<dest_name> should be a defined dest name from
the configuration file, (but can also be a
directory name in a pinch).
-o <dir> Use <dir> as the root directory for
--offline-root <dir> offline installation of packages.
--add-arch <arch>:<prio> Register architecture with given priority
--add-dest <name>:<path> Register destination with given path
Force Options:
--force-depends Install/remove despite failed dependencies
--force-maintainer Overwrite preexisting config files
--force-reinstall Reinstall package(s)
--force-overwrite Overwrite files from other package(s)
--force-downgrade Allow opkg to downgrade packages
--force-space Disable free space checks
--force-postinstall Run postinstall scripts even in offline mode
--force-remove Remove package even if prerm script fails
--force-checksum Don't fail on checksum mismatches
--noaction No action -- test only
--download-only No action -- download only
--nodeps Do not follow dependencies
--nocase Perform case insensitive pattern matching
--size Print package size when listing available packages
--force-removal-of-dependent-packages
Remove package and all dependencies
--autoremove Remove packages that were installed
automatically to satisfy dependencies
-t Specify tmp-dir.
--tmp-dir Specify tmp-dir.
-l Specify lists-dir.
--lists-dir Specify lists-dir.
regexp could be something like 'pkgname*' '*file*' or similar
e.g. opkg info 'libstd*' or opkg search '*libop*' or opkg remove 'libncur*'
422579979
发表于 2017-7-9 23:42
楼主我现在装是装成功了但是我找不到H3C 管理入口
423315675
发表于 2017-7-10 10:16
谢谢楼主000000000
ligo_
发表于 2017-7-10 13:41
422579979 发表于 2017-7-9 23:42
楼主我现在装是装成功了但是我找不到H3C 管理入口
没有luci,在ssh测试成功后放启动脚本里。
422579979
发表于 2017-7-10 16:39
ligo_ 发表于 2017-7-10 13:41
没有luci,在ssh测试成功后放启动脚本里。
这个要怎么弄的路由器小白...
ligo_
发表于 2017-7-12 08:55
422579979 发表于 2017-7-10 16:39
这个要怎么弄的路由器小白...
在ssh输入
njit-client username password eth0.2
(username和password换成你的用户名和密码)
出现success并且能上网就成功了,返回错误代码就想办法解决。
测试成功后在web的启动脚本里加入
njit-client username password eth0.2 >/dev/null 2>&1 &
最后重启路由看看能不能上网
hhy
发表于 2017-7-12 16:34
[ ] Client: Start.
Server: Request Identity!
Client: Response First Identity.
Server: Request MD5-Challenge!
Client: Response MD5-Challenge.
Server: Failure.
请教楼主这是怎么回事
422579979
发表于 2017-7-13 00:06
ligo_ 发表于 2017-7-12 08:55
在ssh输入
njit-client username password eth0.2
(username和password换成你的用户名和密码)
好的谢谢到时候回校试试
op09090
发表于 2017-7-13 13:20
支持一个,大家都用成功了吗
ligo_
发表于 2017-7-13 18:43
hhy 发表于 2017-7-12 16:34
[ ] Client: Start.
Server: Request Identity!
Client: Response First Identity.
后面没有了吗?你inode登录试试,如果你的账号没被黑名单的话可能是mac问题。解决方法是解绑mac或者mac伪装。
页:
1
2
[3]
4
5
6
7
8
9
10
11
12