FreshTomato Stable 2024.5 (2024.12.24)
本帖最后由 legendtemp 于 2025-1-4 01:02 编辑官方http://freshtomato.org/logo.png网址：FreshTomato
Current Release
2024.5 (2024.12.24)
The most important functions are:
[*]Bandwidth monitoring
[*]Advanced QoS
[*]Access control
[*]Enabled SSH/Telnet protocols
[*]Configurable buttons and LED’s
[*]Support for many wireless modes
[*]Built-in Openvirtual** server/client
[*]SNMP protocol
[*]IP/MAC BW Limiter
[*]ARP Binding
http://freshtomato.org/images/status-overview-dark-thumb.png http://freshtomato.org/images/status-overview-blue-thumb.png
本帖最后由 legendtemp 于 2024-12-22 00:04 编辑
支持硬件列表Hardware Compatibility Table
NOTE: You may need to zoom out in your browser to see content in the Notes column.
ModelRevCPU TypeMHzCPUsLANUSB2USB3WiFiFlashNVRAMRAMBuild (SDK)Notes
Asus DSL-AC68U
ARM8002100011AC1900128MB64KB256MBK26ARM (SDK6.37)Supported from 2022.3.
See this forum thread for details.
NoDSL Support.This device is to be used as a router only. The WAN port is initialized to LAN port 1.
Asus RT-N10P
MIPS-R23001100--N3008MB32KB32MBK26RT-N (SDK5.110)
Asus RT-N10UA1/B1/C1MIPS-R230011001-N3008MB32KB32MBK26RT-N (SDK5.110)
Asus RT-N12A1MIPS-R23001100--N3004MB32KB32MBK26 (SDK5.10)
Asus RT-N12B1/C1/D1MIPS-R23001100--N3008MB32KB32MBK26RT-N (SDK5.110)
Asus RT-N12HPA1/B1MIPS-R23001100--N3008MB32KB32MBK26RT-N (SDK5.110)Support for High Power model added in 2020.4.
Asus RT-N12K
MIPS-R23001100--N3008MB32KB32MBK26RT-N (SDK5.110)
Asus RT-N12VP
MIPS-R23001100--N3008MB32KB32MBK26RT-N (SDK5.110)
Asus RT-N15U
MIPS-R2500110001-N3008MB32KB64MBK26RT-N (SDK5.110)
Asus RT-N16
MIPS-R2480110002-N30032MB32KB128MBK26 (SDK5.10) or K26RT-N (SDK5.110)32K NVRAM build required.
Asus RT-AC1750B1ARM10002100011AC1750128MB64KB256MBK26ARM (SDK6.37)Supported from 2021.3.
Asus RT-N18U
ARM8001100011N600128MB64KB256MBK26ARM (SDK6.37)Single core (please use images ending with “…-64K-NOSMP.trx”).
Asus RT-N53
MIPS-R23001100--N6008MB32KB32MBK26RT-N (SDK5.110)
Asus RT-N66UB1MIPS-R2600110002-N90032MB64KB256MBK26RT-N (SDK5.110) or K26RT-AC
Asus RT-N66UC1 (B2)ARM10002100011N900128MB64KB256MBK26ARM (SDK6.37)Supported from 2020.8.
Asus RT-AC1900U
ARM10002100011AC1900128MB64KB256MBK26ARM (SDK6.37)Supported from 2021.3.
Upgrade from AsusWRT to FreshTomato
See this wiki page for details.
Asus RT-AC56S
ARM8001100011AC1200128MB64KB128MBK26ARM (SDK6.37)Single core. (Please use images ending with “…-64K-NOSMP.trx”).
Asus RT-AC56U/R
ARM8002100011AC1200128MB64KB256MBK26ARM (SDK6.37)
Asus RT-AC66UA1/A2/B1MIPS-R2600110002-AC175032MB64KB256MBK26RT-AC (SDK6.30)This model is different than the RT-AC66U_B1 below. This is a MIPS-R2 device with two black USB 2.0 ports at the rear.
Asus RT-AC66U_B1B2 (other Revs ?)ARM10002100011AC1750128MB64KB256MBK26ARM (SDK6.37)This model is different than the RT-AC66U above. This is an ARM device with one blue USB 3.0 port at the front of and one black USB 2.0 port at the rear.
Asus RT-AC67U
ARM10002100011AC1900128MB64KB256MBK26ARM (SDK6.37)Supported from 2020.8.
Asus RT-AC68U/R/P/WA1/A2/B1ARM8002100011AC1900128MB64KB256MBK26ARM (SDK6.37)
Asus RT-AC68UC1/E1/V3ARM10002100011AC1900128MB64KB256MBK26ARM (SDK6.37)C1/E1 supported from 2019.3
V3 supported from 2021.3
V4 NOT supported
Asus RT-AC68UB2ARM14002100011AC1900128MB64KB256MBK26ARM (SDK6.37)
Asus RT-AC1900P
ARM14002100011AC1900128MB64KB256MBK26ARM (SDK6.37)
Asus RT-AC3200
ARM10002100011AC3200128MB128KB256MBK26ARM7 (SDK7)Please check NVRAM first (64KB default at release or 128KB after Asus update). To get 128KB FreshTomato version flashed, you must first have Asus stock firmware V3.0.0.4.382.51374 installed.
Asus RT-AC3100
ARM14002100011AC3100128MB128KB512MBK26ARM714 (SDK714)Supported from 2022.6
See this forum thread for details.
Asus RT-AC88U
ARM14002100011AC3100128MB128KB512MBK26ARM714 (SDK714)Supported from 2022.6
See this forum thread for details.
This image supports only LAN ports 1 - 4 + WAN port. Currently, the external RTL8365MB switch (LAN Ports 5 - 8) will not be used/supported.
Asus RT-AC5300
ARM14002100011AC5300128MB128KB512MBK26ARM714 (SDK714)Supported from 2022.6
See this forum thread for details.
(This is not the Asus GT-AC5300).
Asus TUF-AX3000_V2
ARM170041000-1AX3000256MB128KB512MBK419ARM (HND 5.04AX)Supported from 2023.3.
2.5Gb WAN (Internet) Port.
Based on AsusWRT GPL 388.22525.
Offers AsusWRT GUI/Features and some FreshTomato Features (as of Sept, 2023)
Asus WL-330gE
MIPS-R12401100--G544MBhttps://wiki.freshtomato.org/lib/images/smileys/fixme.svg16MBK26 (SDK5.10)
Asus WL-500GPv1/v2MIPS-R124011002-G548MB32KB32MBK26 (SDK5.10)
Asus WL-500W
MIPS-R126411002-G548MB32KB32MBK26 (SDK5.10)
Asus WL-520GU
MIPS-R124011001-G544MB32KB16MBK26 (SDK5.10)
Belkin F5D8235v3MIPS-R2533110001-N3008MB64KB64MBK26 (SDK5.10) or K26RT-N (SDK5.110)Only v3 is Broadcom-based.
Belkin F7D3301/7301v1MIPS-R245311002-N3008MB32KB64MBK26 (SDK5.10)
Belkin F7D3302/7302v1MIPS-R245311001-N3008MB32KB64MBK26 (SDK5.10)Belkin F7D3302/7302.
Belkin F7D4302/F7D8302v1MIPS-R245311001-A/N6008MB32KB64MBK26 (SDK5.10) or K26RT-N (SDK5.110)Belkin Play Wireless
Belkin F9K1102v1/v3MIPS-R253311001-N6008MB32KB64MBK26RT-N (SDK5.110)See this forum thread for details.
Belkin F9K1113v2ARM8001100011AC120016MB64KB128MBK26ARM (SDK6.37)Supported from 2021.1.
Additional cooling may be needed. This router can get hot due to its design. See this forum thread for details.
(wl0 is the 5 GHz radio).
Buffalo WHR-G54S
MIPS-R12001100--G544MB32KB16MBK26 (SDK5.10)
Buffalo WHR-G125
MIPS-R12401100--G1084MB32KB16MBK26 (SDK5.10)
Buffalo WHR-HP-G54
MIPS-R12001100--G544MB32KB16MBK26 (SDK5.10)
Buffalo WZR-D1800H
MIPS-R2600110001-AC1750128MB64KB128MBK26RT-N (SDK5.110)
Buffalo WZR-1750DHP
ARM8002100011AC1750128MB64KB512MBK26ARM (SDK6.37)See this forum thread for details.
CD-R King CW-5358U
MIPS-R2https://wiki.freshtomato.org/lib/images/smileys/fixme.svghttps://wiki.freshtomato.org/lib/images/smileys/fixme.svg1001-N3008MBhttps://wiki.freshtomato.org/lib/images/smileys/fixme.svg32MBhttps://wiki.freshtomato.org/lib/images/smileys/fixme.svg
Cisco M10 v2
MIPS-R23001100--N3004MB32KB32MBK26RT-N (SDK5.110)
D-Link DIR-320
MIPS-R124011001-N1504MBhttps://wiki.freshtomato.org/lib/images/smileys/fixme.svg32MBK26 (SDK5.10)
D-Link DIR-620C1MIPS-R253011001-N3008MBhttps://wiki.freshtomato.org/lib/images/smileys/fixme.svg64MBK26RT-N (SDK5.110)
D-Link DIR-865L
MIPS-R2600110001-AC175016MB32KB256MBK26RT-AC (SDK6.30)Supported from 2020.8.
NVRAM is limited to 32K. Use special build.
D-Link DIR-868LA1/B1/C1ARM80021000-1AC1750128MB32KB128MBK26ARM (SDK6.37)NVRAM is limited to 32K. Use special build.
Fiboom HG320
MIPS-R253311001-https://wiki.freshtomato.org/lib/images/smileys/fixme.svg16MB32KB256MBK26RT-N (SDK5.110)
Huawei WS880
ARM80021000-1AC1750128MB64KB128MBK26ARM (SDK6.37)
Linksys E800
MIPS-R23001100--N1508MB64KB32MBK26RT-N (SDK5.110)
Linksys E900
MIPS-R23001100--N3008MB64KB32MBK26RT-N (SDK5.110)
Linksys E1000v1/v2/v2.1MIPS-R23001100--N3004MB32KB32MBK26RT-N (SDK5.110)
Linksys E1200v1MIPS-R23001100--N3004MB64KB32MBK26RT-N (SDK5.110)
Linksys E1200v2MIPS-R23001100--N3008MB64KB32MBK26RT-N (SDK5.110)
Linksys E1500
MIPS-R23001100--N3008MB64KB32MBK26RT-N (SDK5.110)
Linksys E1550
MIPS-R230011001-N30016MB60KB64MBK26RT-N (SDK5.110)
Linksys E2000
MIPS-R235411000--N3008MB60KB32MBK26 (SDK5.10) or K26RT-N (SDK5.110)
Linksys E2500v1/v2MIPS-R23001100--N6008MB64KB64MBK26RT-N (SDK5.110)NVRAM is limited to 32kB.
Linksys E2500v3MIPS-R250011001-N60016MB64KB64MBK26RT-N (SDK5.110)NVRAM is limited to 32kB.
Linksys E3000
MIPS-R2480110001-N6008MB60KB64MBK26 (SDK5.10) or K26RT-N (SDK5.110)
Linksys E3200
MIPS-R2500110001-N60016MB64KB64MBK26RT-N (SDK5.110)60K NVRAM.
Linksys E4200v1MIPS-R2480110001-N75016MB60KB64MBK26RT-N (SDK5.110)v2 is not supported, due to its Marvell chipset.
Linksys EA6200v1ARM80011000-1AC900128MB64KB128MBK26ARM (SDK6.37)CFE 32KB NVRAM Bug.
Read this before flashing.
Single core (Use images ending with “…-64K-NOSMP.trx”)
(wl0 is 5 GHz radio).
Linksys EA6300v1ARM80021000-1AC1200128MB64KB128MBK26ARM (SDK6.37)CFE 32KB NVRAM Bug.
Read this before flashing.
Linksys EA6350v1ARM80011000-1AC1200128MB64KB128MBK26ARM (SDK6.37)CFE 32KB NVRAM Bug.
Read this before flashing.
Single core (please use images ending with: “…-64K-NOSMP.trx”)
Linksys EA6350v2ARM80021000-1AC1200128MB64KB128MBK26ARM (SDK6.37)Supported from 2022.1.
See this forum thread for details.
Linksys EA6400
ARM80021000-1AC1200128MB64KB128MBK26ARM (SDK6.37)CFE 32KB NVRAM Bug.
Read this before flashing.
Linksys EA6500v2ARM8002100011AC1750128MB64KB256MBK26ARM (SDK6.37)CFE 32KB NVRAM Bug.
Read this before flashing.
Linksys EA6700
ARM8002100011AC1750128MB64KB256MBK26ARM (SDK6.37)CFE 32KB NVRAM Bug.
Read this before flashing.
Linksys EA6900v1/v1.1ARM8002100011AC1900128MB64KB256MBK26ARM (SDK6.37)CFE 32KB NVRAM Bug.
Read this before flashing.
Linksys WRT54GLv1/v1.1MIPS-R12001100--G544MB32KB16MBK26 (SDK5.10)
Linksys WRT54G/GSv2/v3/v4MIPS-R12401100--G544-8MB32KB32-64MBK26 (SDK5.10)
Linksys WRTSL54GS
MIPS-R126611001-G548MB32KB32MBK26 (SDK5.10)
Linksys WRT160Nv1MIPS-R12661100--N3004MB32KB32MBK26 (SDK5.10)
Linksys WRT160Nv3MIPS-R23001100--N3004MB32KB32MBK26 (SDK5.10)
Linksys WRT300Nv1MIPS-R12641100--N3004MB32KB32MBK26 (SDK5.10)
Linksys WRT310Nv2MIPS-R230011000--N3004MB32KB32MBK26 (SDK5.10)Same as WRT160N v3
Linksys WRT320N
MIPS-R235411000--N3008MB32KB32MBK26 (SDK5.10)
Linksys WRT610Nv2MIPS-R2480110001-N3008MB32KB64MBK26 (SDK5.10)
Netgear AC1450
ARM80021000-1AC1750128MB64KB256MBK26ARM (SDK6.37)Supported from 2022.3 .
See this forum thread for details.
Netgear R6200v2ARM80011000-1AC1200128MB64KB256MBK26ARM (SDK6.37)Supported from 2023.5
See this forum thread for details.
Netgear R6250
ARM80021000-1AC1600128MB64KB256MBK26ARM (SDK6.37)
Netgear R6300v1MIPS-R26001100021AC1750128MB64KB128MBK26RT-AC (SDK6.30)
Netgear R6300v2ARM8002100011AC1750128MB64KB256MBK26ARM (SDK6.37)
Netgear R6400v1ARM8002100011AC1750128MB128KB256MBK26ARM (SDK6.37)
Netgear R6400v2ARM10002100011AC1750128MB128KB256MBK26ARM (SDK6.37)
Netgear R6700v1ARM100021000-1AC1750128MB64KB256MBK26ARM (SDK6.37)Supported from 2020.8.
Do not enable JFFS with firmware less than 2022.1 for R6900, R7000 and R6700v1. Doing so will delete board_data partition!
Netgear R6700v3ARM10002100011AC1750128MB128KB256MB (512MB)K26ARM (SDK6.37)Some of these routers have 512 MB RAM. Images for both variants are provided:
“…-AIO-128K-512M.trx” (support for 512 MB RAM)
“…-AIO-128K.trx” (support up to 256 MB RAM)
If RAM unknown or unsure, use the 512 MB RAM version. It will always work.
Netgear R6900v1ARM100021000-1AC1900128MB64KB256MBK26ARM (SDK6.37)Supported from 2021.3
Do not enable JFFS with firmware before 2022.1 for R6900, R7000 and R6700v1. Doing so will delete board_data partition!
Netgear R7000
ARM10002100011AC1900128MB64KB256MBK26ARM (SDK6.37)Do not enable JFFS with firmware before2022.1 on R6900, R7000 and R6700v1. Doing so will delete board_data partition!
If you have a custom CFE, like Vortex 1.3.0.7, flash back your original Netgear cfe / bootloader before updating to 2020.3 and newer.
Netgear EX7000
ARM80021000-1AC190016MB64KB128MBK26ARM (SDK6.37)Work in progress. Switch is not yet working. See this forum thread for details.
Netgear R7900
ARM100021000-1AC3000128MB64KB512MB (256 MB?)K26ARM7 (SDK7)Supported from 2022.4.
Netgear R8000
ARM10002100011AC3200128MB64KB256MBK26ARM7 (SDK7)Do not enable JFFS with firmware before 2022.3 for R8000. Doing so can delete/damage board_data partition!
Netgear XR300
ARM100021000-1AC1750128MB128KB512MBK26ARM (SDK6.37)Supported from 2021.1.
(images ending with “…-128K-512M.trx”)
Netgear WNR2000v2MIPS-R23001100--N3004MB32KB32MBK26 (SDK5.10)Flash storage limited to about 3.5MB, so 2020.x IPv6 image is the only current firmware that will fit.
Netgear WNR3500v2MIPS-R245311000--N3003.5MB32KB32MBK26 (SDK5.10)Due to hard-coded jffs2 partition, flash size is reduced to only 3,473,408 bytes. As of today, FT 2020.x MiniIPV6 is 3,407,872 bytes and is the only image type that fits.
Netgear WNR3500Lv1MIPS-R2453110001-N3008MB32KB64MBK26 (SDK5.10)Only enable JFFS on the mini fw otherwise your board_data partition is overwritten. Image must be smaller than ~7.3 MB (7,654,604.8 Bytes or 7,475.2 KB)
See this forum thread for details.
Netgear WNR3500Lv2MIPS-R2480110001-N30032MB32KB128MBK26RT-N (SDK5.110)Please use only images with the name “freshtomato-Netgear-3500Lv2-K26USB_RT-N5x-XXXX.chk” (AIO or virtual** version).
Netgear WNDR3400v1MIPS-R248011001-N6008MB64KB64MBK26RT-N (SDK5.110)
Netgear WNDR3400v2/v3MIPS-R253011001-N6008MB64KB64MBK26RT-N (SDK5.110)See this forum thread for details.
Netgear WNDR3700v3MIPS-R2480110001-N6008MB64KB64MBK26RT-N (SDK5.110)Supported from 2020.6.
Netgear WNDR4000
MIPS-R2480110001
N7508MB64KB64MBK26RT-N (SDK5.110)Supported from 2020.6.
Netgear WNDR4500v1MIPS-R2600110002-N900128MB64KB128MBK26RT-AC (SDK6.30)At least up to 2022.2, the LEDs do not function.
Netgear WNDR4500v2MIPS-R2600110002-N900128MB64KB128MBK26RT-AC (SDK6.30)
Ovislink WL1600GL
MIPS-R12401100--G1254MBhttps://wiki.freshtomato.org/lib/images/smileys/fixme.svg16MBK26 (SDK5.10)
Tenda AC15v1.0ARM80021000-1AC190016MB64KB128MBK26ARM (SDK6.37)
Tenda AC18v1.0ARM80021000-1AC1900128MB64KB256MBK26ARM (SDK6.37)
Tenda N6
MIPS-R23001100--N6008MB32KB64MBK26RT-N (SDK5.110)
Tenda N60
MIPS-R2500110001-N6008MB32KB64MBK26RT-N (SDK5.110)
Tenda N80
MIPS-R2500110001-N9008MB64KB128MBK26RT-N (SDK5.110)
Tenda W1800R
MIPS-R2600110002-AC175016MB64KB256MBK26RT-AC (SDK6.30)
Xiaomi Mi R1D
ARM1000210001-AC1200128MB64KB256MBK26ARM (SDK6.37)This unit may be bricked if you try to FULLY erase NVRAM. Resetting values to defaults is safe. To access the CFE when you have stock xVortex CFE, power on while holding the Reset button for 10 seconds.
See this forum thread for details.
Use images with ending “…-Custom-64K.trx”
(wl0 is the 5 GHz radio).
ZTE ZXV10 H618B
MIPS-R124011001-G5416MBhttps://wiki.freshtomato.org/lib/images/smileys/fixme.svg32MBK26 (SDK5.10)
ZTE H218N
MIPS-R2500110001-N30016MBhttps://wiki.freshtomato.org/lib/images/smileys/fixme.svg64MBK26RT-N (SDK5.110)
3月20就更新了 用了几周 停稳的 但是2.4g不行 RG200E-CA刷了，不错，可以多wan 2020.05.08最新版的FreshTomato版本2020.3新鲜出炉了，这个版本使用了新的无线驱动，解决了很多路由器以前2.4GHz频道传输性能低下的问题。 居然有小米R1D的固件
但是不太敢刷 本帖最后由 serino 于 2020-5-31 17:26 编辑
请教下，我小米R1D上已经是隔壁的Tomato了，想刷成FreshTomato，
是不是直接下载 FreshTomato R1D 的固件， 然后在 KoolshareTomato 的 系统管理 > 升级 把固件丢进去点升级就行了？
还是需要做什么事先的准备工作，比如需要勾选清除NVRAM什么的
————————————
我没清除设置，更不敢重置NVRAM，直接刷上去了
但是很奇怪，5G wifi 刚启动可以到866Mbps，但是有设备连接上之后，只能上5xxMbps
我信道宽度已经选了80Mbps，wifi 功率也从30mw调到60wm，但还是没办法上866
————————————
我把 5G 的 Region 改成 #a
协商带宽就正常了
serino 发表于 2020-5-18 19:19
请教下，我小米R1D上已经是隔壁的Tomato了，想刷成FreshTomato，
是不是直接下载 FreshTomato R1D 的固件 ...
抱歉哈，这么久回复，我的建议是 跨版本的刷机还是要谨慎，注意看刷机说明。英文不行的用翻译。另外我还是建议 清除NVRAM （恢复出厂设置） 手机刷机的 三清 ，因为这样就可以避免很多乱七八糟的问题。祝你顺利。 legendtemp 发表于 2020-5-27 00:26
抱歉哈，这么久回复，我的建议是 跨版本的刷机还是要谨慎，注意看刷机说明。英文不行的用翻译。另外我还 ...
这机子貌似有点特殊，我还是不太敢清除NVRAM，直接刷的，没出现问题
改了个WiFi的Region，现在能上866Mbps了 serino 发表于 2020-5-27 04:37
这机子貌似有点特殊，我还是不太敢清除NVRAM，直接刷的，没出现问题
改了个WiFi的Region，现在能上866Mb ...
跟你一样的路由器 是把这个固件直接升级的吗？ cctv88888999 发表于 2020-5-30 13:16
跟你一样的路由器 是把这个固件直接升级的吗？
是的，我直接从 KoolshareTomato 升级成 FreshTomato，没重置 NVRAM
WiFi Region 我选的 #a，不知道是不是全区，信号协商带宽就正常了 好东西，ea6200 red---socks2转发到n1 v1+1ray套cf可以跑1.6G 腾达类的BCM5357主控的 能刷么？ 更新至Stable:2020.5 (2020-07-17) 收藏，还有老路由器