openwrt升级固件报错问题请教

zzb771***

openwrt-21.02源码编译的固件，升级基于红米ac2100路由器上的openwrt升级报错


命令行报错信息:
root@OpenWrt:~# sysupgrade -n -v /tmp/openwrt-ramips-mt7621-xiaomi_redmi-router-ac2100-squashfs-sysupgrade.bin
Device xiaomi,redmi-router-ac2100 not supported by this image
Supported devices: xiaomi,redmi-router-ac2100 - Image version mismatch: image 1.1, device 1.0. Please wipe config during upgrade (force required) or reinstall. Reason: Config cannot be migrated from swconfig to DSA
Image check failed.

具体的配置勾

dreamt***

换个镜像格式

av***

新源码升级成DSA架构，没法保留设置升级，强刷清空设置即可。

zzb771***

avin4 发表于 2021-11-11 14:52
新源码升级成DSA架构，没法保留设置升级，强刷清空设置即可。

请问一下路由器强制清空设置如何操作，或者源码内核能取消DSA的勾选吗

av***

zzb771357319 发表于 2021-11-11 17:48
请问一下路由器强制清空设置如何操作，或者源码内核能取消DSA的勾选吗

1. sysupgrade --help
   
2. Usage: /sbin/sysupgrade [<upgrade-option>...] <image file or URL>
   
3.        /sbin/sysupgrade [-q] [-i] [-c] [-u] [-o] [-k] <backup-command> <file>
   
4. 
   
5. upgrade-option:
   
6.         -f <config>  restore configuration from .tar.gz (file or url)
   
7.         -i           interactive mode
   
8.         -c           attempt to preserve all changed files in /etc/
   
9.         -o           attempt to preserve all changed files in /, except those
   
10.                      from packages but including changed confs.
    
11.         -u           skip from backup files that are equal to those in /rom
    
12.         -n           do not save configuration over reflash
    
13.         -p           do not attempt to restore the partition table after flash.
    
14.         -k           include in backup a list of current installed packages at
    
15.                      /etc/backup/installed_packages.txt
    
16.         -T | --test
    
17.                      Verify image and config .tar.gz but do not actually flash.
    

复制代码

-F | --force
                     Flash image even if image checks fail, this is dangerous!

1. 
   
2.         -q           less verbose
   
3.         -v           more verbose
   
4.         -h | --help  display this help
   
5. 
   
6. backup-command:
   
7.         -b | --create-backup <file>
   
8.                      create .tar.gz of files specified in sysupgrade.conf
   
9.                      then exit. Does not flash an image. If file is '-',
   
10.                      i.e. stdout, verbosity is set to 0 (i.e. quiet).
    
11.         -r | --restore-backup <file>
    
12.                      restore a .tar.gz created with sysupgrade -b
    
13.                      then exit. Does not flash an image. If file is '-',
    
14.                      the archive is read from stdin.
    
15.         -l | --list-backup
    
16.                      list the files that would be backed up when calling
    
17.                      sysupgrade -b. Does not create a backup file.
    

复制代码

官方源码和非官方源码，譬如本坛流行的lean，互刷可能出问题，从breed刷过渡固件再刷新固件就是了

DSA……上游已经改了，改的一团乱，但是没得选，是屎是尿都没法，只能一口吞

zzb771***

avin4 发表于 2021-11-11 18:32
-F | --force
                     Flash image even if image checks fail, this is dangerous!

感谢，问题解决