As long as 199 3 Netcom 4G wireless router DDR2*2G IPQ8064 dual-core Gigabit network port AC1200 wireless USB3.0

mk-link

90%~9.5% are new, some of them are permissions, but the SSD is removed. When the 4G router is plugged into the mobile phone card, it can be used. When used by APs, it supports Gigabit POE

CPU: IPQ8064 Dual-core 1.4G
Memory: 2G DDR2 (H5Q4G63CFR*4pcs)
flash: 32M（FL256AIFR0）
SSD: Dismantled (+100 yuan if 128G is needed)
Network: QCA8337 Gigabit*1 (there is also a place on the board to add another network port)
WiFi: AC1200 2.4G 300M 5G should be 866M
GPS module: GPS-96U7
Appears to be a Bluetooth module: CC2541
TTL: 1 MicroUSB debugging port (find a MicroUSB data cable and connect it to RXD, connect the white cable to TXD, and connect the black cable to GND)
USB: 1 x USB3.0 (original firmware function not developed)
Antenna: Full built-in antenna, 1 external SMA interface
MiniPCI-E: 3 x (USB)*2, Msata*1 with 4G module installed
Power supply: 3P + ACC to positive - negative 9~36V wide voltage
POE Power Supply: Supports Gigabit POE power supply
Much better than regular 4G routing!!

You don't need to do anything when you get it, and you can put it into use directly by inserting the card. This product has been set before it is issued, and it can be used directly after getting it, if you need to change the wifi password, please see the setting method on the back.
MTFI-2.4G wireless cipher Aa123456
MTFI-5G wireless cipher Aa123456

When APs use:
1 network cable is connected to M520, 1 head is connected to your LAN router or switch→ plug in the power supply of M520→ find the signal of MTFI-xx, fill in the wifi password and you can use it.

When 4G routing uses:
Insert the mobile phone card into MIS 1→ plug in the power supply of the M520→ find the signal of MTFI-xx, fill in the wifi password and it will be useful

About 9-9.5% are new, most of which have not yet been installed!
Main unit (including 4G module)*1 unit
12V1A power supply*1 (changed by special interface)
External Antenna*1 (attached to the case)
The price of no 128G SSD is 199 yuan! Some are 299 yen!! (SSDs seem to be of little use in practice.) Firmware does not have disk sharing function)

Majestic green mountains

Good thing, it would be even more awesome if there was a great god to do the firmware

friend8179

Good thing, it's a pity, I don't have an application scenario

liang12410210

Good stuff, with ideas

FrankWu

What is the wireless coverage area when using AP?

cg1984

It looks so powerful, but I don't know what the wireless signal strength is

longyunjie

🐮 This thing looks more stable than Huawei ZTE's CPE, supporting three-network 4G?

mk-link

longyunjie Posted on 2019-9-15 10:23
🐮 This thing looks more stable than Huawei ZTE's CPE, supporting three-network 4G?

Triple network 4G has a built-in U9300 or EC20 module. Full Netcom.

yuqiaogd

Interested in supporting IPv6 address allocation?

mk-link

yuqiaogd posted on 2019-9-17 15:20
Interested in supporting IPv6 address allocation?

I don't understand this...

yuqiaogd

mk-link posted on 2019-9-17 16:32
I don't understand this...

For example, if I use a 4G card that supports IPv6, can the client be assigned to the global IPv6 address?

qwjifeng

It cannot be used as a wired router

kaka1943

Looks good