第一款平价11AC路由器TP-Link WDR7500的Openwrt固件出来了！

szman

价格只有其他11ac路由器的一半，不过固件仍有问题，还不如4530%好用。细节如下：

forum。openwrt。org/viewtopic.php?id=44201&p=2

It's time to do a release for those of you who want to try out openwrt on your wdr7500.
Tested, working:
Ethernet
dual channel 2.4Ghz 802.11n wifi
Usb ports + mounting ext2 filesystem
System led lights (except for the 5ghz led)
ssh, telnet
Configuring the system using Luci
Samba
Tested, not working:
5ghz 802.11n wifi and wireless ac. It should be possible to enable this once the ath10k driver gets into the kernel
tri-channel wireless, openwrt only supports dual channel right now.
Untested, may work:
Mounting ntfs and vfat filesystems
Wireless at >150mb/s. The best any of my computers can do is 150mb/s
WPS/QSS switch
Any wan connections other than dhcp e.g.PPPoE
So if you can give up 5ghz wireless n and wireless ac feel free to try out my firmware from here:
h t t ps ://www。dropbox。com/sh/2ttawsgz669wvnd/Le0XrPvPXY
The only "supported by me" way of flashing this is to break into the bootloader with a serial cable tftpboot the factory image into ram, erase the nand from 0x20000 +0x7C0000 and write the factory image to 0x20000 +0x7C0000.

请不要胡乱输入以及粘贴、复制等方式灌水

请尊重作者、并共同维护网站的正常阅读，否则账户将会被限制发帖、回帖，并且积分可能会被清零，站内短信以及阅读权限等都会受到影响，谢谢。 具体限制方式：https://www.right.com.cn/forum/thread-8307840-1-1.html

bamboolee

支持下 等固件完善了就开刷

ZHIZAI100

请问是什么配置的？谢谢。

axishero

op早支持了，问题是5g部分没有驱动，而且ath10k确定永不支持v1的ar9880，楼主折腾下驱动吧

haxc

5g起不了，也残废了一半吧

换号了

我在官方看到 加个不便宜额....

ooof

问一下，谁知知道这里的两个文件分别是怎么用的：  https://www。dropbox。com/sh/2ttawsgz669wvnd/Le0XrPvPXY

谢谢！