求高手解决。。。。

晋鹏***

把一个AP的固件写入另一台里面，俩台配制是完全一样的，第一次启动完全正常，第二次启动出现如下的信息： The system is going down NOW !! Sending SIGTERM to all processes. Exiting Syslogd! Please stand by while rebooting the system. Restarting system. +ATHRF1: Port 0, Neg Success ATHRF1: unit 0 phy addr 0 ATHRF1: reg0 1000 Ethernet eth0: MAC address 00:03:7f:ff:ff:fe IP: 0.0.0.0/255.255.255.0, Gateway: 0.0.0.0 Default server: 0.0.0.0 RedBoot(tm) bootstrap and debug environment [ROMRAM] Non-certified release, version UNKNOWN - built 13:43:16, Jul 23 2011 Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. Board: pb44 RAM: 0x80000000-0x82000000, [0x80047df0-0x80fb1000] available FLASH: 0xbf000000 - 0xc0000000, 64 blocks of 0x00040000 bytes each. == Executing boot script in 2.000 seconds - enter ^C to abort RedBoot> fis boot Image loaded from 0x807ffff0 image_magic = 49540001 image_len = 6f5010 read image version 125 size = 0x006f5010 checking crc... crc ok! Now booting linux kernel: Base address 0x80050000 Entry 0x80800000 Cmdline : console=ttyS0,115200 root=31:00 rootfstype=squashfs boot_partition=2 init=/sbin/init wan_mac=00:1f:6f:35:8e:34 Decompressing kernel... Decompressing Kernel.... OK. found squashfs at 840010 Unlocking bootcfg ... Reading from bootcfg to /var/tmp/bootcfg ...  [r] Install gpio modules Unlocking bootcfg ... Reading from bootcfg to /var/tmp/bootcfg ...  [r] bconf = 00:1f:6f:35:8e:34 Install wifi modules VAP device wlan0 created wlan0 VAP device wlan0 created wlan0 Unlocking bootcfg ... Reading from bootcfg to /var/tmp/bootcfg ...  [r] bconf = 00:1f:6f:35:8e:34 Reload wifi modules Unlocking bootcfg ... Reading from bootcfg to /var/tmp/bootcfg ...  [r] bconf = 00:1f:6f:35:8e:34 Install wan modules apconfig: "wlan0/enable" not found in nvram apconfig: "wlan0/opmode" not found in nvram apconfig: "wlan0/phymode" not found in nvram apconfig: "wlan0/autochannel" not found in nvram apconfig: "wlan0/channel" not found in nvram apconfig: "wlan0/txpower" not found in nvram apconfig: "wlan0/nmodeenable" not found in nvram apconfig: "wlan0/datarate" not found in nvram apconfig: "wlan0/beaconinterval" not found in nvram apconfig: "wlan0/dtimperiod" not found in nvram apconfig: "wlan0/rtsthreshold" not found in nvram apconfig: "wlan0/fragthreshold" not found in nvram apconfig: "wlan0/vlanforward" not found in nvram apconfig: "wlan0/txchain" not found in nvram apconfig: "wlan0/rxchain" not found in nvram apconfig: "wlan0/SHGI" not found in nvram apconfig: "wlan0/AMPDU" not found in nvram apconfig: "wlan0/AMSDU" not found in nvram apconfig: "wlan0/ChannelWidth" not found in nvram apconfig: "wlan0/hiddenssid" not found in nvram apconfig: "wlan0/wepkeyascii" not found in nvram apconfig: "wlan0/encryptkey" not found in nvram apconfig: "wlan0/assoccount" not found in nvram apconfig: "wlan0/wmm" not found in nvram apconfig: "wlan0/intrabss" not found in nvram apconfig: "wlan0/aclmode" not found in nvram apconfig: "wlan0_0/enable" not found in nvram apconfig: "wlan0_1/enable" not found in nvram apconfig: "wlan0_2/enable" not found in nvram apconfig: "wlan0_3/enable" not found in nvram apconfig: "wlan0_4/enable" not found in nvram apconfig: "wlan0_5/enable" not found in nvram apconfig: "wlan0_6/enable" not found in nvram apconfig: "wlan0_7/enable" not found in nvram apconfig: "wlan0_8/enable" not found in nvram apconfig: "wlan0_9/enable" not found in nvram apconfig: "wlan0_10/enable" not found in nvram apconfig: "wlan0_11/enable" not found in nvram apconfig: "wlan0_12/enable" not found in nvram apconfig: "wlan0_13/enable" not found in nvram apconfig: "wlan0_14/enable" not found in nvram apconfig: [info ] ----------configure device(wifi1):---------- apconfig: [info ] enable wlan0 apconfig: [info ] nvramedit set wlan0 wrong channelwidth in wirelessmode apconfig: "wan/maxthroughput" not found in nvram apconfig: "wlan/maxthroughput" not found in nvram apconfig: "wlan0/qos" not found in nvram apconfig: "ath0/enable" not found in nvram apconfig: "ath0/opmode" not found in nvram apconfig: "ath0/phymode" not found in nvram apconfig: "ath0/autochannel" not found in nvram apconfig: "ath0/channel" not found in nvram apconfig: "ath0/txpower" not found in nvram apconfig: "ath0/nmodeenable" not found in nvram apconfig: "ath0/datarate" not found in nvram apconfig: "ath0/beaconinterval" not found in nvram apconfig: "ath0/dtimperiod" not found in nvram apconfig: "ath0/rtsthreshold" not found in nvram apconfig: "ath0/fragthreshold" not found in nvram apconfig: "ath0/vlanforward" not found in nvram apconfig: "ath0/txchain" not found in nvram apconfig: "ath0/rxchain" not found in nvram apconfig: "ath0/SHGI" not found in nvram apconfig: "ath0/AMPDU" not found in nvram apconfig: "ath0/AMSDU" not found in nvram apconfig: "ath0/ChannelWidth" not found in nvram apconfig: "ath0/hiddenssid" not found in nvram apconfig: "ath0/wepkeyascii" not found in nvram apconfig: "ath0/encryptkey" not found in nvram apconfig: "ath0/assoccount" not found in nvram apconfig: "ath0/wmm" not found in nvram apconfig: "ath0/intrabss" not found in nvram apconfig: "ath0/aclmode" not found in nvram apconfig: "ath0_0/enable" not found in nvram apconfig: "ath0_1/enable" not found in nvram apconfig: "ath0_2/enable" not found in nvram apconfig: "ath0_3/enable" not found in nvram apconfig: "ath0_4/enable" not found in nvram apconfig: "ath0_5/enable" not found in nvram apconfig: "ath0_6/enable" not found in nvram apconfig: "ath0_7/enable" not found in nvram apconfig: "ath0_8/enable" not found in nvram apconfig: "ath0_9/enable" not found in nvram apconfig: "ath0_10/enable" not found in nvram apconfig: "ath0_11/enable" not found in nvram apconfig: "ath0_12/enable" not found in nvram apconfig: "ath0_13/enable" not found in nvram apconfig: "ath0_14/enable" not found in nvram apconfig: [info ] ----------configure device(wifi0):---------- apconfig: [info ] enable ath0 apconfig: [info ] nvramedit set ath0 wrong channelwidth in wirelessmode apconfig: "wan/maxthroughput" not found in nvram apconfig: "ath/maxthroughput" not found in nvram apconfig: "wlan0/qos" not found in nvram apconfig: "ath0/wds" not found in nvram apconfig: "ath0/wds" not found in nvram apconfig: "wlan0/txpower" not found in nvram apconfig: "wlan/att" not found in nvram apconfig: "ath0/txpower" not found in nvram apconfig: "ath/att" not found in nvram SIOCGIFFLAGS: No such device SIOCGIFFLAGS: No such device SIOCGIFFLAGS: No such device ifconfig: up: error fetching interface information: Device not found udhcpc: option requires an argument -- i BusyBox v1.01 (2012.05.08-08:58+0000) multi-call binary Usage: udhcpc [-Cfbnqv] [-c CLIENTID] [-H HOSTNAME] [-i INTERFACE] [-p pidfile] [-r IP] [-s script]         -c,     --clientid=CLIENTID     Set client identifier         -C,     --clientid-none Suppress default client identifier         -H,     --hostname=HOSTNAME     Client hostname         -h,                             Alias for -H         -f,     --foreground    Do not fork after getting lease         -b,     --background    Fork to background if lease cannot be immediatel y negotiated.         -i,     --interface=INTERFACE   Interface to use (default: eth0)         -n,     --now   Exit with failure if lease cannot be immediately negotia ted.         -p,     --pidfile=file  Store process ID of daemon in file         -q,     --quit  Quit after obtaining lease         -r,     --request=IP    IP address to request (default: none)         -s,     --script=file   Run file at dhcp events (default: /usr/share/udh cpc/default.script)         -v,     --version       Display version SIOCSIFADDR: No such device SIOCSIFNETMASK: No such device SIOCGIFFLAGS: No such device 求高手解决。。。。。。。。坐等。。。。

晋鹏***

等待高手解决。。。

hwl***

是不是flash有加密区？

huangc***

两块flash的型号一样么，看样子是像linux没有认到flash

晋鹏***

hwlock 发表于 2013-12-6 16:47
是不是flash有加密区？

怎么解决。。可以帮帮我吗。。

晋鹏***

huangchao222 发表于 2013-12-6 16:50
两块flash的型号一样么，看样子是像linux没有认到flash

俩块不一样，本来的那块上面的内容用编程器擦除不了， 刷完以后，第一次可以启动，第二次就不行了。

huangc***

晋鹏科技 发表于 2013-12-7 00:11
俩块不一样，本来的那块上面的内容用编程器擦除不了， 刷完以后，第一次可以启动，第二次就不行了。

那很有可能是flash问题。

晋鹏***

huangchao222 发表于 2013-12-7 09:37
那很有可能是flash问题。

有解决办法吗

huangc***

晋鹏科技 发表于 2013-12-7 10:28
有解决办法吗

找相同型号的flash，找不到试下常用的那种mx25lxx，w25qxx之类的试下。

on***

lz最好把机型，还有两片flash的型号报一下
我猜想是不是39系列的flash用在了适用29系列的板子上了

晋鹏***

以前的芯片是25P28V6P
现在用的是FL128PLF
机器是三元达的wpb-5000-i-t-3an/gn-20p

ant***

FLASH很贵吗？ 换一样的型号就OK