[2019-03-05]改华硕[N14U N54U]5G 2G的7620老毛子Padavan固件(私人云储存 aria2 QOS)

大***

请教大神，我已经在自定义规则里面把 迅雷的那个改成 1了。可是在系统日志里面还是没有看到迅雷启动。192.168.1.1:9000/getsysinfo 也还是打不开啊。

Mar 31 23:14:12 syslogd started: BusyBox v1.24.1
Mar 31 23:14:12 RT-AC54U: firmware version: 3.4.3.9-099_03-26
Mar 31 23:14:12 kernel: klogd started: BusyBox v1.24.1 (2016-03-26 12:40:28 CST)
Mar 31 23:14:12 kernel: Linux version 3.4.111 (padavan@hms) (gcc version 4.4.7 (GCC) ) #5 Sun Mar 27 00:02:16 CST 2016
Mar 31 23:14:12 kernel: MediaTek SoC: MT7620A, RevID: 0206, RAM: DDR2, XTAL: 20MHz
Mar 31 23:14:12 kernel: CPU/OCP/SYS frequency: 580/193/193 MHz
Mar 31 23:14:12 kernel: CPU revision is: 00019650 (MIPS 24KEc)
Mar 31 23:14:12 kernel: Determined physical RAM map:
Mar 31 23:14:12 kernel:  memory: 08000000 @ 00000000 (usable)
Mar 31 23:14:12 kernel: Zone PFN ranges:
Mar 31 23:14:12 kernel:   Normal   0x00000000 -> 0x00008000
Mar 31 23:14:12 kernel: Movable zone start PFN for each node
Mar 31 23:14:12 kernel: Early memory PFN ranges
Mar 31 23:14:12 kernel:     0: 0x00000000 -> 0x00008000
Mar 31 23:14:12 kernel: On node 0 totalpages: 32768
Mar 31 23:14:12 kernel: free_area_init_node: node 0, pgdat 80346030, node_mem_map 81000000
Mar 31 23:14:12 kernel:   Normal zone: 256 pages used for memmap
Mar 31 23:14:12 kernel:   Normal zone: 0 pages reserved
Mar 31 23:14:12 kernel:   Normal zone: 32512 pages, LIFO batch:7
Mar 31 23:14:12 kernel: Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Mar 31 23:14:12 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Mar 31 23:14:12 kernel: pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Mar 31 23:14:12 kernel: pcpu-alloc: [0] 0
Mar 31 23:14:12 kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Mar 31 23:14:12 kernel: Kernel command line: console=ttyS0,115200n8 root=/dev/mtdblock4 rootfstype=squashfs
Mar 31 23:14:12 kernel: PID hash table entries: 512 (order: -1, 2048 bytes)
Mar 31 23:14:12 kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Mar 31 23:14:12 kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Mar 31 23:14:12 kernel: Writing ErrCtl register=0001ad40
Mar 31 23:14:12 kernel: Readback ErrCtl register=0001ad40
Mar 31 23:14:12 kernel: Memory: 126248k/131072k available (2821k kernel code, 4824k reserved, 532k data, 228k init, 0k highmem)
Mar 31 23:14:12 kernel: NR_IRQS:40
Mar 31 23:14:12 kernel: console [ttyS0] enabled
Mar 31 23:14:12 kernel: Calibrating delay loop... 385.02 BogoMIPS (lpj=770048)
Mar 31 23:14:12 kernel: pid_max: default: 32768 minimum: 301
Mar 31 23:14:12 kernel: Mount-cache hash table entries: 512
Mar 31 23:14:12 kernel: NET: Registered protocol family 16
Mar 31 23:14:12 kernel: bio: create slab <bio-0> at 0
Mar 31 23:14:12 kernel: SCSI subsystem initialized
Mar 31 23:14:12 kernel: usbcore: registered new interface driver usbfs
Mar 31 23:14:12 kernel: usbcore: registered new interface driver hub
Mar 31 23:14:12 kernel: usbcore: registered new device driver usb
Mar 31 23:14:12 kernel: PCI host bridge to bus 0000:00
Mar 31 23:14:12 kernel: pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
Mar 31 23:14:12 kernel: pci_bus 0000:00: root bus resource [io  0x10160000-0x1016ffff]
Mar 31 23:14:12 kernel: pci 0000:00:00.0: [1814:0801] type 01 class 0x060400
Mar 31 23:14:12 kernel: pci 0000:00:00.0: supports D1
Mar 31 23:14:12 kernel: pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Mar 31 23:14:12 kernel: pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
Mar 31 23:14:12 kernel: pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
Mar 31 23:14:12 kernel: pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Mar 31 23:14:12 kernel: pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Mar 31 23:14:12 kernel: pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
Mar 31 23:14:12 kernel: pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref]
Mar 31 23:14:12 kernel: pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]
Mar 31 23:14:12 kernel: pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref]
Mar 31 23:14:12 kernel: pci 0000:00:00.0: PCI bridge to [bus 01-01]
Mar 31 23:14:12 kernel: pci 0000:00:00.0:   bridge window [mem 0x20000000-0x200fffff]
Mar 31 23:14:12 kernel: pci 0000:00:00.0:   bridge window [mem 0x20100000-0x201fffff pref]
Mar 31 23:14:12 kernel: Switching to clocksource MIPS
Mar 31 23:14:12 kernel: NET: Registered protocol family 2
Mar 31 23:14:12 kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Mar 31 23:14:12 kernel: TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Mar 31 23:14:12 kernel: TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Mar 31 23:14:12 kernel: TCP: Hash tables configured (established 4096 bind 4096)
Mar 31 23:14:12 kernel: TCP: reno registered
Mar 31 23:14:12 kernel: UDP hash table entries: 256 (order: 0, 4096 bytes)
Mar 31 23:14:12 kernel: NET: Registered protocol family 1
Mar 31 23:14:12 kernel: PCI: CLS 32 bytes, default 32
Mar 31 23:14:12 kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Mar 31 23:14:12 kernel: msgmni has been set to 246
Mar 31 23:14:12 kernel: io scheduler noop registered
Mar 31 23:14:12 kernel: io scheduler bfq registered (default)
Mar 31 23:14:12 kernel: BFQ I/O-scheduler version: v7r7
Mar 31 23:14:12 kernel: Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Mar 31 23:14:12 kernel: serial8250: ttyS0 at MMIO 0x10000c00 (irq = 20) is a 16550A
Mar 31 23:14:12 kernel: Ralink GPIO driver initialized. Number of GPIO: 73, GPIO mode: 0058171D
Mar 31 23:14:12 kernel: loop: module loaded
Mar 31 23:14:12 kernel: Ralink SPI flash driver, SPI clock: 48MHz
Mar 31 23:14:12 kernel: SPI flash chip: W25Q128FV (ef 40180000) (16384 Kbytes)
Mar 31 23:14:12 kernel: Creating 7 MTD partitions on "raspi":
Mar 31 23:14:12 kernel: 0x000000000000-0x000000030000 : "Bootloader"
Mar 31 23:14:12 kernel: 0x000000030000-0x000000040000 : "Config"
Mar 31 23:14:12 kernel: 0x000000040000-0x000000050000 : "Factory"
Mar 31 23:14:12 kernel: 0x000000050000-0x000000184080 : "Kernel"
Mar 31 23:14:12 kernel: 0x000000184080-0x000000fc0000 : "RootFS"
Mar 31 23:14:12 kernel: 0x000000fc0000-0x000001000000 : "Storage"
Mar 31 23:14:12 kernel: 0x000000050000-0x000000fc0000 : "Firmware_Stub"
Mar 31 23:14:12 kernel: tun: Universal TUN/TAP device driver, 1.6
Mar 31 23:14:12 kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Mar 31 23:14:12 kernel: Ralink APSoC Ethernet Driver v3.2.3 (raeth)
Mar 31 23:14:12 kernel: raeth: PDMA RX ring 256, PDMA TX ring 512. Max packet size 1536
Mar 31 23:14:12 kernel: raeth: NAPI support, weight 32
Mar 31 23:14:12 kernel: raeth: Byte Queue Limits (BQL) support
Mar 31 23:14:12 kernel: PPP generic driver version 2.4.2
Mar 31 23:14:12 kernel: PPP MPPE Compression module registered
Mar 31 23:14:12 kernel: NET: Registered protocol family 24
Mar 31 23:14:12 kernel: PPTP driver version 0.8.5
Mar 31 23:14:12 kernel: usbcore: registered new interface driver libusual
Mar 31 23:14:12 kernel: nf_conntrack version 0.5.0 (16384 buckets, 32768 max)
Mar 31 23:14:12 kernel: xt_time: kernel timezone is -0000
Mar 31 23:14:12 kernel: Bridge firewalling registered
Mar 31 23:14:12 kernel: gre: GRE over IPv4 demultiplexor driver
Mar 31 23:14:12 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Mar 31 23:14:12 kernel: TCP: cubic registered
Mar 31 23:14:12 kernel: NET: Registered protocol family 10
Mar 31 23:14:12 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Mar 31 23:14:12 kernel: IPv6 over IPv4 tunneling driver
Mar 31 23:14:12 kernel: NET: Registered protocol family 17
Mar 31 23:14:12 kernel: L2TP core driver, V2.0
Mar 31 23:14:12 kernel: PPPoL2TP kernel driver, V2.0
Mar 31 23:14:12 kernel: 8021q: 802.1Q VLAN Support v1.8
Mar 31 23:14:12 kernel: ASUS NVRAM, v0.08. Available space: 61440. Integrity: OK
Mar 31 23:14:12 kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
Mar 31 23:14:12 kernel: Freeing unused kernel memory: 228k freed
Mar 31 23:14:12 kernel: Algorithmics/MIPS FPU Emulator v1.5
Mar 31 23:14:12 kernel: rt2860v2_ap: module license 'Proprietary' taints kernel.
Mar 31 23:14:12 kernel: APSoC AP Driver version: 2.7.2.0
Mar 31 23:14:12 kernel: PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
Mar 31 23:14:12 kernel: MT76x2 AP Driver version: 3.0.4.0.P1
Mar 31 23:14:12 kernel: usbcore: registered new interface driver usblp
Mar 31 23:14:12 kernel: Initializing USB Mass Storage driver...
Mar 31 23:14:12 kernel: usbcore: registered new interface driver usb-storage
Mar 31 23:14:12 kernel: USB Mass Storage support registered.
Mar 31 23:14:12 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mar 31 23:14:12 kernel: ehci-platform ehci-platform: Generic Platform EHCI Controller
Mar 31 23:14:12 kernel: ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Mar 31 23:14:12 kernel: ehci-platform ehci-platform: irq 26, io mem 0x101c0000
Mar 31 23:14:12 kernel: ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored
Mar 31 23:14:12 kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Mar 31 23:14:12 kernel: usb usb1: Product: Generic Platform EHCI Controller
Mar 31 23:14:12 kernel: usb usb1: Manufacturer: Linux 3.4.111 ehci_hcd
Mar 31 23:14:12 kernel: usb usb1: SerialNumber: ehci-platform
Mar 31 23:14:12 kernel: hub 1-0:1.0: USB hub found
Mar 31 23:14:12 kernel: hub 1-0:1.0: 1 port detected
Mar 31 23:14:12 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Mar 31 23:14:12 kernel: ohci-platform ohci-platform: Generic Platform OHCI Controller
Mar 31 23:14:12 kernel: ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
Mar 31 23:14:12 kernel: ohci-platform ohci-platform: irq 26, io mem 0x101c1000
Mar 31 23:14:12 kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Mar 31 23:14:12 kernel: usb usb2: Product: Generic Platform OHCI Controller
Mar 31 23:14:12 kernel: usb usb2: Manufacturer: Linux 3.4.111 ohci_hcd
Mar 31 23:14:12 kernel: usb usb2: SerialNumber: ohci-platform
Mar 31 23:14:12 kernel: hub 2-0:1.0: USB hub found
Mar 31 23:14:12 kernel: hub 2-0:1.0: 1 port detected
Mar 31 23:14:12 kernel: usb 1-1: new high-speed USB device number 2 using ehci-platform
Mar 31 23:14:12 kernel: raeth: HW IP/TCP/UDP checksum RX/TX offload enabled
Mar 31 23:14:12 kernel: raeth: HW VLAN TX offload enabled
Mar 31 23:14:12 kernel: raeth: HW Scatter/Gather TX offload enabled
Mar 31 23:14:12 kernel: mtk_esw - hw bridge: W|LLLL
Mar 31 23:14:12 kernel: mtk_esw - set broadcast storm control rate as: 10 mbps
Mar 31 23:14:12 kernel: device eth2.1 entered promiscuous mode
Mar 31 23:14:12 kernel: device eth2 entered promiscuous mode
Mar 31 23:14:14 kernel: usb 1-1: New USB device found, idVendor=1687, idProduct=3254
Mar 31 23:14:14 kernel: usb 1-1: Product: USB2.0 FlashDisk
Mar 31 23:14:14 kernel: usb 1-1: Manufacturer: Kingmax
Mar 31 23:14:14 kernel: usb 1-1: SerialNumber: 3900000001599942
Mar 31 23:14:14 kernel: scsi0 : usb-storage 1-1:1.0
Mar 31 23:14:14 kernel: mtk_esw: Link Status Changed - Port WAN Link Up
Mar 31 23:14:16 kernel:  ch1 bssid=bc:d1:77:d4:0b:08
Mar 31 23:14:18 kernel:  ch1 bssid=94:77:2b:0a:6b:4c
Mar 31 23:14:18 kernel:  ch1 bssid=c0:61:18:4e:71:ba
Mar 31 23:14:18 kernel:  ch1 bssid=1c:fa:68:44:a4:3c
Mar 31 23:14:18 kernel:  ch1 bssid=cc:34:29:95:16:f4
Mar 31 23:14:18 kernel:  ch1 bssid=24:69:68:6d:c3:ce
Mar 31 23:14:18 kernel:  ch1 bssid=00:25:86:99:16:90
Mar 31 23:14:18 kernel:  ch2 bssid=f0:b4:29:52:41:a8
Mar 31 23:14:18 kernel:  ch4 bssid=ec:88:8f:b9:96:dc
Mar 31 23:14:18 kernel:  ch6 bssid=1c:fa:68:48:d3:38
Mar 31 23:14:18 kernel:  ch6 bssid=ec:88:8f:7b:42:1e
Mar 31 23:14:18 kernel:  ch6 bssid=80:e4:da:d1:25:3b
Mar 31 23:14:18 kernel:  ch6 bssid=c8:3a:35:01:db:a8
Mar 31 23:14:18 kernel:  ch7 bssid=94:77:2b:4e:9b:1c
Mar 31 23:14:18 kernel:  ch9 bssid=c8:3a:35:4b:ad:80
Mar 31 23:14:18 kernel:  ch9 bssid=54:e6:fc:30:fd:a2
Mar 31 23:14:18 kernel:  ch11 bssid=14:b9:68:26:db:f0
Mar 31 23:14:18 kernel:  ch11 bssid=28:2c:b2:4a:8e:4c
Mar 31 23:14:18 kernel:  ch11 bssid=c0:61:18:7d:b2:9c
Mar 31 23:14:18 kernel:  ch11 bssid=0c:72:2c:ca:21:2e
Mar 31 23:14:18 kernel:  ch11 bssid=1c:fa:68:0b:8c:5e
Mar 31 23:14:18 kernel:  ch11 bssid=00:1b:2f:0e:90:16
Mar 31 23:14:18 kernel:  ch11 bssid=14:75:90:18:a3:cc
Mar 31 23:14:18 kernel:  ch13 bssid=c8:3a:35:41:bb:98
Mar 31 23:14:18 kernel: =====================================================
Mar 31 23:14:18 kernel: Channel 1 : Dirty = 546, False CCA = 588, Busy Time = 0, Skip Channel = FALSE
Mar 31 23:14:18 kernel: Channel 2 : Dirty = 402, False CCA = 342, Busy Time = 0, Skip Channel = FALSE
Mar 31 23:14:18 kernel: Channel 3 : Dirty = 376, False CCA = 188, Busy Time = 0, Skip Channel = FALSE
Mar 31 23:14:18 kernel: Channel 4 : Dirty = 402, False CCA = 311, Busy Time = 0, Skip Channel = FALSE
Mar 31 23:14:18 kernel: Channel 5 : Dirty = 392, False CCA = 237, Busy Time = 0, Skip Channel = FALSE
Mar 31 23:14:18 kernel: Channel 6 : Dirty = 408, False CCA = 259, Busy Time = 0, Skip Channel = FALSE
Mar 31 23:14:18 kernel: Channel 7 : Dirty = 418, False CCA = 406, Busy Time = 0, Skip Channel = FALSE
Mar 31 23:14:18 kernel: Channel 8 : Dirty = 396, False CCA = 807, Busy Time = 0, Skip Channel = FALSE
Mar 31 23:14:18 kernel: Channel 9 : Dirty = 480, False CCA = 235, Busy Time = 0, Skip Channel = FALSE
Mar 31 23:14:18 kernel: Channel 10 : Dirty = 416, False CCA = 143, Busy Time = 0, Skip Channel = FALSE
Mar 31 23:14:18 kernel: Channel 11 : Dirty = 594, False CCA = 233, Busy Time = 0, Skip Channel = FALSE
Mar 31 23:14:18 kernel: Channel 12 : Dirty = 304, False CCA = 193, Busy Time = 0, Skip Channel = FALSE
Mar 31 23:14:18 kernel: Channel 13 : Dirty = 306, False CCA = 105, Busy Time = 0, Skip Channel = FALSE
Mar 31 23:14:18 kernel: =====================================================
Mar 31 23:14:18 kernel: Rule 1 CCA value : Min Dirtiness ==> Select Channel 12
Mar 31 23:14:18 kernel: Min Dirty = 304
Mar 31 23:14:18 kernel: ExChannel = 8 , 0
Mar 31 23:14:18 kernel: BW        = 40
Mar 31 23:14:18 kernel: device ra0 entered promiscuous mode
Mar 31 23:14:19 kernel: =====================================================
Mar 31 23:14:19 usb_modeswitch: no rule for device 1687:3254
Mar 31 23:14:19 kernel: Channel 36 : Dirty = 0, False CCA = 33, Busy Time = 0, Skip Channel = FALSE
Mar 31 23:14:19 kernel: Channel 40 : Dirty = 0, False CCA = 47, Busy Time = 0, Skip Channel = FALSE
Mar 31 23:14:19 kernel: Channel 44 : Dirty = 0, False CCA = 62, Busy Time = 0, Skip Channel = FALSE
Mar 31 23:14:19 kernel: Channel 48 : Dirty = 0, False CCA = 73, Busy Time = 0, Skip Channel = FALSE
Mar 31 23:14:19 kernel: =====================================================
Mar 31 23:14:19 kernel: Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 36
Mar 31 23:14:19 kernel: Min Dirty = 0
Mar 31 23:14:19 kernel: ExChannel = 0 , 0
Mar 31 23:14:19 kernel: BW        = 80
Mar 31 23:14:19 kernel: scsi 0:0:0:0: Direct-Access     Kingmax  USB2.0 FlashDisk 1100 PQ: 0 ANSI: 0 CCS
Mar 31 23:14:19 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Mar 31 23:14:19 kernel: device rai0 entered promiscuous mode
Mar 31 23:14:20 kernel: sd 0:0:0:0: [sda] 15597568 512-byte logical blocks: (7.98 GB/7.43 GiB)
Mar 31 23:14:20 kernel: sd 0:0:0:0: [sda] Write Protect is off
Mar 31 23:14:20 kernel: sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
Mar 31 23:14:20 kernel: sd 0:0:0:0: [sda] No Caching mode page found
Mar 31 23:14:20 kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Mar 31 23:14:20 kernel: br0: port 3(rai0) entered forwarding state
Mar 31 23:14:20 kernel: br0: port 2(ra0) entered forwarding state
Mar 31 23:14:20 kernel: br0: port 1(eth2.1) entered forwarding state
Mar 31 23:14:21 dnsmasq[442]: started, version 2.75 cachesize 1024
Mar 31 23:14:21 dnsmasq[442]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Mar 31 23:14:21 dnsmasq-dhcp[442]: DHCP, IP range 192.168.1.2 -- 192.168.1.40, lease time 1d
Mar 31 23:14:21 dnsmasq-dhcp[442]: DHCP, sockets bound exclusively to interface br0
Mar 31 23:14:21 dnsmasq[442]: read /etc/hosts - 3 addresses
Mar 31 23:14:21 dnsmasq[442]: read /etc/storage/dnsmasq/hosts - 0 addresses
Mar 31 23:14:21 dnsmasq-dhcp[442]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Mar 31 23:14:21 kernel: sd 0:0:0:0: [sda] No Caching mode page found
Mar 31 23:14:21 kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Mar 31 23:14:21 kernel:  sda: sda1
Mar 31 23:14:21 kernel: sd 0:0:0:0: [sda] No Caching mode page found
Mar 31 23:14:21 kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Mar 31 23:14:21 kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk
Mar 31 23:14:21 automount: /sbin/automount.sh sda1    AiDisk_a1
Mar 31 23:14:21 kernel: Ralink HW NAT v2.52.0 Module Enabled, FoE Size: 16384
Mar 31 23:14:21 automount: mount  device /dev/sda1 (ntfs) to /media/AiDisk_a1 @@@@@ /media/AiDisk_a1
Mar 31 23:14:21 RT-AC54U: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
Mar 31 23:14:21 RT-AC54U: Hardware NAT/Routing: IPv4 UDP flow offload - ON
Mar 31 23:14:21 RT-AC54U: Hardware NAT/Routing: IPv6 routes offload - OFF
Mar 31 23:14:21 DHCP MAN Client: starting on eth2.2 ...
Mar 31 23:14:22 QOS: 最大下载2560 KB/S,最大上传256 KB/S
Mar 31 23:14:22 webui: 稍等后启动相关设置
Mar 31 23:14:22 QOS: QOS没有开启或闪存不足缺模块
Mar 31 23:14:22 kernel: ufsd: driver (8.6, Mar 26 2016 22:45:45, LBD=ON, delalloc, ioctl, bdi) loaded at 86b00000
Mar 31 23:14:22 kernel: NTFS (with native replay) support included
Mar 31 23:14:22 kernel: optimized: speed
Mar 31 23:14:22 kernel: Built_for__Asus_n65u_2012-03-29
Mar 31 23:14:22 crond[552]: crond (busybox 1.24.1) started, log level 8
Mar 31 23:14:22 防火墙规则: 脚本完成
Mar 31 23:14:22 pppd[557]: Plugin rp-pppoe.so loaded.
Mar 31 23:14:22 pppd[557]: RP-PPPoE plugin version 3.12 compiled against pppd 2.4.7
Mar 31 23:14:22 pppd[558]: pppd 2.4.7 started by admin, uid 0
Mar 31 23:14:22 pppd[558]: PPP session is 3618 (0xe22)
Mar 31 23:14:22 kernel: ufsd: use builtin utf8 instead of kernel utf8
Mar 31 23:14:22 pppd[558]: Connected to 00:25:9e:5c:b0:8e via interface eth2.2
Mar 31 23:14:22 pppd[558]: Using interface ppp0
Mar 31 23:14:22 pppd[558]: Connect: ppp0 <--> eth2.2
Mar 31 23:14:22 kernel: br0: port 3(rai0) entered forwarding state
Mar 31 23:14:22 kernel: br0: port 2(ra0) entered forwarding state
Mar 31 23:14:22 kernel: br0: port 1(eth2.1) entered forwarding state
Mar 31 23:14:23 httpd[563]: Server listening port 80 (HTTP).
Mar 31 23:14:23 kernel: ufsd: sda1 without journal
Mar 31 23:14:23 dropbear[569]: Running in background
Mar 31 23:14:23 miniupnpd[577]: version 1.9 starting UPnP-IGD ext if ppp0 BOOTID=1459437263
Mar 31 23:14:23 miniupnpd[577]: HTTP listening on port 24558
Mar 31 23:14:23 kernel: Netfilter messages via NETLINK v0.30.
Mar 31 23:14:23 kernel: ip_set: protocol 6
Mar 31 23:14:25 pppd[558]: Remote message: Authentication success,Welcome!
Mar 31 23:14:25 pppd[558]: PAP authentication succeeded
Mar 31 23:14:25 pppd[558]: peer from calling number 00:25:9E:5C:B0:8E authorized
Mar 31 23:14:25 pppd[558]: local  IP address 210.78.36.17
Mar 31 23:14:25 pppd[558]: remote IP address 210.78.32.1
Mar 31 23:14:25 pppd[558]: primary   DNS address 202.106.0.20
Mar 31 23:14:25 pppd[558]: secondary DNS address 202.106.0.21
Mar 31 23:14:25 RT-AC54U: WAN up (ppp0)
Mar 31 23:14:25 dnsmasq[442]: read /etc/hosts - 3 addresses
Mar 31 23:14:25 dnsmasq[442]: read /etc/storage/dnsmasq/hosts - 0 addresses
Mar 31 23:14:25 dnsmasq-dhcp[442]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Mar 31 23:14:25 dnsmasq[442]: using nameserver 202.106.0.20#53
Mar 31 23:14:25 dnsmasq[442]: using nameserver 202.106.0.21#53
Mar 31 23:14:25 admin: 运行后WAN上/下活动： WAN动作:【up】，WAN接口名称:【ppp0】，WANIPv4地址:【210.78.36.17】
Mar 31 23:14:25 QOS: 最大下载2560 KB/S,最大上传256 KB/S
Mar 31 23:14:25 webui: 稍等后启动相关设置
Mar 31 23:14:25 PPPoE: Connected
Mar 31 23:14:25 webui: 稍等后启动相关设置
Mar 31 23:14:25 QOS: QOS没有开启或闪存不足缺模块
Mar 31 23:14:25 防火墙规则: 脚本完成
Mar 31 23:14:28 FTP server: daemon is started
Mar 31 23:14:29 Samba Server: daemon is started
Mar 31 23:14:29 Transmission: Cannot start: please create dir "transmission" on target volume!
Mar 31 23:14:29 Aria: Cannot start: please create dir "aria" on target volume!
Mar 31 23:14:33 NTP Client: Synchronizing time to pool.ntp.org.
Mar 31 23:14:33 【script】: 脚本检查更新
Mar 31 23:14:34 【script】: 脚本不需更新
Mar 31 23:14:39 NTP Client: System time changed, offset: 4.756746s
Mar 31 23:14:39 自定义脚本0: 脚本完成
Mar 31 23:14:39 dnsmasq[442]: exiting on receipt of SIGTERM
Mar 31 23:14:40 dnsmasq[828]: started, version 2.75 cachesize 1024
Mar 31 23:14:40 dnsmasq[828]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Mar 31 23:14:40 dnsmasq-dhcp[828]: DHCP, IP range 192.168.1.2 -- 192.168.1.40, lease time 1d
Mar 31 23:14:40 dnsmasq-dhcp[828]: DHCP, sockets bound exclusively to interface br0
Mar 31 23:14:40 dnsmasq[828]: read /etc/hosts - 3 addresses
Mar 31 23:14:40 dnsmasq[828]: read /etc/storage/dnsmasq/hosts - 0 addresses
Mar 31 23:14:40 dnsmasq-dhcp[828]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Mar 31 23:14:40 dnsmasq[828]: using nameserver 202.106.0.20#53
Mar 31 23:14:40 dnsmasq[828]: using nameserver 202.106.0.21#53
Mar 31 23:14:40 di: 互联网状态：12, 经过时间: ts.
Mar 31 23:14:40 连接AP: 12秒后，自动搜寻ap
Mar 31 23:14:52 连接AP: 脚本完成
Mar 31 23:15:16 iptables: 删除8118转发规则
Mar 31 23:15:17 adbyby: 开始下载7620n.tar.gz
Mar 31 23:15:21 adbyby: 启动adbyby程序
Mar 31 23:15:22 【adbyby】: 第一次加载规则完毕
Mar 31 23:15:22 dnsmasq[828]: exiting on receipt of SIGTERM
Mar 31 23:15:22 dnsmasq[1024]: started, version 2.75 cachesize 1024
Mar 31 23:15:22 dnsmasq[1024]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Mar 31 23:15:22 dnsmasq-dhcp[1024]: DHCP, IP range 192.168.1.2 -- 192.168.1.40, lease time 1d
Mar 31 23:15:22 dnsmasq-dhcp[1024]: DHCP, sockets bound exclusively to interface br0
Mar 31 23:15:22 dnsmasq[1024]: read /etc/hosts - 3 addresses
Mar 31 23:15:22 dnsmasq[1024]: read /etc/storage/dnsmasq/hosts - 0 addresses
Mar 31 23:15:22 dnsmasq-dhcp[1024]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Mar 31 23:15:22 dnsmasq[1024]: using nameserver 202.106.0.20#53
Mar 31 23:15:22 dnsmasq[1024]: using nameserver 202.106.0.21#53
Mar 31 23:15:24 adbyby: 启动完成
Mar 31 23:15:24 adbyby: lazy更新：!  -----&#65533;&#65533;&#65533;&#65533;&#689;&#65533;&#65533;:  2016-3-29 21:56:17   by:xwhyc-----^M
Mar 31 23:15:24 adbyby: video更新：!  -----&#65533;&#65533;&#65533;&#65533;&#689;&#65533;&#65533;:  2016-3-31 16:41:59   by:xwhyc-----------------------------------------------^M
Mar 31 23:15:24 adbyby: 第三方规则行数：  行
Mar 31 23:15:24 adbyby: 自定义规则行数： 3 行
Mar 31 23:15:25 adbyby: adbyby 进程守护启动
Mar 31 23:15:25 自定义脚本: 脚本完成
Mar 31 23:15:35 【opt】: opt不需更新
Mar 31 23:15:35 webui: UI 开关遍历状态监测
Mar 31 23:15:35 运行路由器启动后: 脚本完成
Mar 31 23:15:35 自定义脚本0: 脚本完成
Mar 31 23:15:40 crond[1279]: crond (busybox 1.24.1) started, log level 8
Mar 31 23:15:40 dnsmasq[1024]: exiting on receipt of SIGTERM
Mar 31 23:15:41 dnsmasq[1309]: started, version 2.75 cachesize 1024
Mar 31 23:15:41 dnsmasq[1309]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Mar 31 23:15:41 dnsmasq-dhcp[1309]: DHCP, IP range 192.168.1.2 -- 192.168.1.40, lease time 1d
Mar 31 23:15:41 dnsmasq-dhcp[1309]: DHCP, sockets bound exclusively to interface br0
Mar 31 23:15:41 dnsmasq[1309]: read /etc/hosts - 3 addresses
Mar 31 23:15:41 dnsmasq[1309]: read /etc/storage/dnsmasq/hosts - 0 addresses
Mar 31 23:15:41 dnsmasq-dhcp[1309]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Mar 31 23:15:41 dnsmasq[1309]: using nameserver 202.106.0.20#53
Mar 31 23:15:41 dnsmasq[1309]: using nameserver 202.106.0.21#53
Mar 31 23:15:41 SS: 清理防火墙转发规则
Mar 31 23:15:41 SS: SS service stop.
Mar 31 23:15:45 adbyby: 找不到8118转发规则，重新添加
Mar 31 23:15:45 iptables: 添加8118转发规则
Mar 31 23:16:02 adbyby: 定时检查：找不到8118转发规则，重新添加
Mar 31 23:16:02 iptables: 添加8118转发规则
Mar 31 23:19:02 adbyby: 有多个8118转发规则，删除多余
Mar 31 23:19:02 iptables: 删除8118转发规则

wj***

jsxkim 发表于 2016-3-31 11:04
100M接入，但是开启后测速才20多M啊，只是开了QOS和adbyby，迅雷下载的时候连adbyby都要被关闭

你的路由是千兆网口吗？

8kC***

hiboyhiboyhiboy 发表于 2016-3-31 10:21
有这个功能，你选pdnsd的dns方式

意思SS的DNS解析方式也是用路由全局吗?不只局限于SS?

试了下,不能自定义DNS.提供一个网址,被污染的 download.bullguard.com

正常DNS解析会是美国68开头,中国所有DNS解析为37开头阿塞拜疆..GG

我联想Y1开启PDNSD表示无效....外国网址并不能由外国DNS解析呀...还是国内的结果..

pdx***

大家好，极路由3刷了该固件后不能发射Wifi信号了，不知道是不是个别情况？

yeah***

ss设置成功

现在我只希望ip292.168.1.101走ss流量，其他ip正常访问网络

自定义设置里我把ip改成192.168.1.101然后把前面的#删除，保存设置，重启路由

结果都是全部走ss

系统配置里面控制台那里输入命令也是不行

# 以下 IP 使用 轻量级隧道代理（临时修改方法：系统管理 - 控制台输入以下命令）
# 把该内网IP加入该ss_spec_lan_ac集合
# ipset add ss_spec_lan_ac 192.168.2.115
# 取消：把该内网IP从该ss_spec_lan_ac集合中删除（清除DNS缓存、重启浏览器后生效）
# ipset del ss_spec_lan_ac 192.168.2.115
# （可选项：删除前面的#可生效）
cat > "/tmp/ss_spec_lan_DOMAIN.txt" <<-\EOF
192.168.1.101




求大神指导

zen***

pdx1989 发表于 2016-4-1 07:59
大家好，极路由3刷了该固件后不能发射Wifi信号了，不知道是不是个别情况？

RT-AC1200HP-GPIO-12-JI3-128M        极路由-极三（HC5861），复位键GPIO#12，16M闪存，128M内存，2.4/5GWi-Fi，USB、LAN一个千兆口
我比你惨，拨号上网都连不上，刷回官版本了。

ha***

好强大。。。。。。还是不懂用

zha***

mw305 v1 机器，８Ｍ＋６４Ｍ，刷了ailuyou-64M的固件出现：
ASUS NVRAM, v0.08. Available space: 61440. Integrity: MTD is empty              
end_request: I/O error, dev mtdblock4, sector 0                                 
SQUASHFS error: squashfs_read_data failed to read block 0x0                     
SQUASHFS error: unable to read squashfs_super_block                             
VFS: Cannot open root device "mtdblock4" or unknown-block(31,4): error -5      
Please append a correct "root=" boot option; here are the available partitions:
1f00             192 mtdblock0  (driver?)                                       
1f01              64 mtdblock1  (driver?)                                       
1f02              64 mtdblock2  (driver?)                                       
1f03            1195 mtdblock3  (driver?)                                       
1f04            6420 mtdblock4  (driver?)                                       
1f05             256 mtdblock5  (driver?)                                       
1f06            7872 mtdblock6  (driver?)                                       
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,4)

如果刷PSG1208或WT3020H的话，能正常启动，可是刷了PSG1208，多了没用的５Ｇ配置，刷WT3020H的话，网口灯全都是不亮的，请教这是什么问题呢？------------------------------------
刚发现解决办法:刷WT3020H的固件，然后在路由器界面里升级，用爱路由的固件，就会有灯了，但不能恢复出厂，一恢复就又是错误死机。

jsx***

wjsh 发表于 2016-3-31 23:25
你的路由是千兆网口吗？

Y1都是百兆口，到y1的wan口的光猫是1000M，直接接光猫口到电脑speedtest测试为100M以上，主要是下载时cpu负载100%，估计发热很大

jsx***

有没有用这个固件的光猫接路由后路由接iptv可以看电视的，客厅少一根网线啊，纠结

漫***

太棒了  z再怎么做到饿了，。。

pdx***

zengqs 发表于 2016-4-1 09:37
RT-AC1200HP-GPIO-12-JI3-128M        极路由-极三（HC5861），复位键GPIO#12，16M闪存，128M内存，2.4/5GWi-Fi ...

唉。。我上网还能上，但没有无线信号~ 估计RT-AC1200HP-GPIO-12-JI3-128M是新添加的版本，还不成熟。关注后续版本~

zen***

pdx1989 发表于 2016-4-1 15:05
唉。。我上网还能上，但没有无线信号~ 估计RT-AC1200HP-GPIO-12-JI3-128M是新添加的版本，还不成熟。关注 ...

确实2.4/5GWi-Fi都开启还是没有wifi信号。我还在拨号上网呢？外网WAN设置还不会搞，死活连接不上网等后续版本再试试

cfsun***

zengqs 发表于 2016-4-1 15:54
确实2.4/5GWi-Fi都开启还是没有wifi信号。我还在拨号上网呢？外网WAN设置还不会搞，死活连接不上网等后续 ...

我的RT-AC1200HP-GPIO-12-JI3-128M也是，外网连上几秒就掉线，

libi***

极1S，7628固件，用个一两天就会卡死！必须重启或者恢复出厂设置！