|
本帖最后由 CrazyX 于 2016-5-19 22:14 编辑
第一个样本
May 19 10:41:16 【script】: 脚本不需更新
May 19 10:41:16 自定义脚本0: 脚本完成
May 19 10:41:17 dnsmasq[333]: exiting on receipt of SIGTERM
May 19 10:41:17 dnsmasq[662]: started, version 2.75 cachesize 512
May 19 10:41:17 dnsmasq[662]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts no-TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
May 19 10:41:17 dnsmasq-dhcp[662]: DHCP, IP range 192.168.1.2 -- 192.168.1.244, lease time 1d
May 19 10:41:17 dnsmasq-dhcp[662]: DHCP, sockets bound exclusively to interface br0
May 19 10:41:17 dnsmasq[662]: read /etc/hosts - 3 addresses
May 19 10:41:17 dnsmasq[662]: read /etc/storage/dnsmasq/hosts - 0 addresses
May 19 10:41:17 dnsmasq-dhcp[662]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
May 19 10:41:17 dnsmasq[662]: using nameserver 此处正确
May 19 10:41:17 dnsmasq[662]: using nameserver 此处正确
May 19 10:41:17 di: 互联网状态:12, 经过时间: ts.
May 19 10:41:17 连接AP: 12秒后,自动搜寻ap
May 19 10:41:29 连接AP: 脚本完成
May 19 10:41:29 MentoHUST: 关闭
May 19 10:41:53 iptables: 删除8118转发规则
May 19 10:41:54 adbyby: 开始下载7620n.tar.gz
May 19 10:41:58 adbyby: 启动adbyby程序
May 19 10:42:00 【adbyby】: 第一次加载规则完毕
May 19 10:42:00 dnsmasq[662]: exiting on receipt of SIGTERM
May 19 10:42:00 dnsmasq[891]: started, version 2.75 cachesize 512
第二个样本
May 19 13:05:49 DHCP WAN Client: bound (eth2.2), IP: 10.100.44.11, GW: 10.100.44.254, lease time: 691200
May 19 13:05:49 RT-AC54U: WAN up (eth2.2)
May 19 13:05:49 dnsmasq[5277]: read /etc/hosts - 3 addresses
May 19 13:05:49 dnsmasq[5277]: read /etc/storage/dnsmasq/hosts - 0 addresses
May 19 13:05:49 dnsmasq-dhcp[5277]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
May 19 13:05:49 dnsmasq[5277]: using nameserver 此处正确
May 19 13:05:49 dnsmasq[5277]: using nameserver 此处正确
May 19 13:05:49 QOS: 最大下载2560 KB/S,最大上传256 KB/S
May 19 13:05:50 webui: UI 开关遍历状态监测
May 19 13:05:50 QOS: QOS没有开启或闪存不足缺模块
May 19 13:05:50 自定义脚本0: 脚本完成
May 19 13:05:50 防火墙规则: 脚本完成
May 19 13:05:50 yyggshsh: 运行后WAN上/下活动: WAN动作:【up】,WAN接口名称:【eth2.2】,WANIPv4地址:【10.100.44.11】
May 19 13:05:50 webui: UI 开关遍历状态监测
May 19 13:05:50 自定义脚本0: 脚本完成
May 19 13:05:55 相框显示: 停止程序
May 19 13:05:56 MentoHUST: 关闭
May 19 13:05:56 crond[9258]: crond (busybox 1.24.2) started, log level 8
May 19 13:05:56 dnsmasq[5277]: exiting on receipt of SIGTERM
May 19 13:05:57 SS: 脚本完成
May 19 13:05:57 dnsmasq[9376]: started, version 2.75 cachesize 512
May 19 13:05:57 dnsmasq[9376]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts no-TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
May 19 13:05:57 dnsmasq-dhcp[9376]: DHCP, IP range 192.168.1.2 -- 192.168.1.244, lease time 1d
May 19 13:05:57 dnsmasq-dhcp[9376]: DHCP, sockets bound exclusively to interface br0
May 19 13:05:57 dnsmasq[9376]: read /etc/hosts - 3 addresses
May 19 13:05:57 dnsmasq[9376]: read /etc/storage/dnsmasq/hosts - 0 addresses
May 19 13:05:57 dnsmasq-dhcp[9376]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
May 19 13:05:57 dnsmasq[9376]: using nameserver 此处正确
May 19 13:05:57 dnsmasq[9376]: using nameserver 此处正确
May 19 13:05:57 SS: 脚本完成
May 19 13:05:57 SS: SS service stop.
实际上到扩展功能设置里面打开锐捷拨号以后,每次重新连接wan就会有MentoHUST: 关闭这一行,而且在设置页面输入拨号信息保存以后重启路由器并没有拨号出去,完全启动路由器以后并未连接到外网。
通过控制台敲拨号命令进去可以成功拨号,不过重启之后就掉了,估计就是MentoHUST: 关闭这一行的作用确实是生效的。
感谢楼主的辛勤劳动~
|
|