[2019-03-05]改华硕[N14U N54U]5G 2G的7620老毛子Padavan固件(私人云储存 aria2 QOS)

shen***

shengxian 发表于 2016-9-3 12:48
9.3管理界面进不去了

重启可以了

xr***

每次h大更新固件 我本地没有更新 但是重启 功能 ss   就不正常了 是不是我打开了自动更新脚本 按钮导致？
因为脚本自动更新了 而固件却没有 导致 启动异常了？

biye***

又更新了，谢谢大大

jiang***

Love4Taylor 发表于 2016-9-3 12:52
防火墙调整最大连接数

一直有一个位置设备加入，什么东西，这个“unknown”是什么东西啊！！
13:34:15 crond[2014]: crond (busybox 1.24.2) started, log level 8
Sep  3 13:36:07 bwmon[1130]: UNKNOW join your network: IP: 172.20.38.188, MAC: f0:76:1c:d2:16:7f!
Sep  3 13:36:27 bwmon[1130]: iPhone join your network: IP: 192.168.1.101, MAC: c0:f2:fb:95:fb:50!
Sep  3 13:37:31 login[2158]: invalid password for 'UNKNOWN' on 'pts/1'
Sep  3 13:37:48 login[2185]: invalid password for 'UNKNOWN' on 'pts/1'
Sep  3 13:38:03 login[2253]: invalid password for 'UNKNOWN' on 'pts/1'
Sep  3 13:38:18 login[2276]: invalid password for 'UNKNOWN' on 'pts/1'
Sep  3 13:38:34 login[2282]: invalid password for 'UNKNOWN' on 'pts/1'
Sep  3 13:38:49 login[2303]: invalid password for 'UNKNOWN' on 'pts/0'
Sep  3 13:39:05 login[2307]: invalid password for 'UNKNOWN' on 'pts/0'

Le***

Love4Taylor 发表于 2016-9-3 11:46
期待你来写一个😂

哈哈，我也是看到楼上说的才问呀！话说，你写好了记得扔一个坛子里泡菜！

幻想***

正好看看

kuni***

有人知道是什么情况吗，路由器不断重拨，刷其它固件没有这情况，用的是极1S，
Jan  1 00:00:22 pppd[492]: PPP session is 240 (0xf0)
Jan  1 00:00:22 pppd[492]: Connected to a0:f3:e4:82:13:aa via interface eth2.2
Jan  1 00:00:22 pppd[492]: Using interface ppp0
Jan  1 00:00:22 pppd[492]: Connect: ppp0 <--> eth2.2
Jan  1 00:00:25 automount: /sbin/automount.sh mmcblk0    AiCard_01
Jan  1 00:00:25 automount: mount  device /dev/mmcblk0 () to /media/AiCard_01 @@@@@ /media/AiCard_01
Jan  1 00:00:25 Automount: AiCard_01
Jan  1 00:00:25 automount: /sbin/automount.sh mmcblk0p1    AiCard_02
Jan  1 00:00:26 automount: mount  device /dev/mmcblk0p1 () to /media/AiCard_02 @@@@@ /media/AiCard_02
Jan  1 00:00:26 pppd[492]: syncppp not active
Jan  1 00:00:26 Automount: AiCard_02
Jan  1 00:00:26 pppd[492]: Remote message: Login ok
Jan  1 00:00:26 pppd[492]: PAP authentication succeeded
Jan  1 00:00:26 pppd[492]: peer from calling number A0:F3:E4:82:13:AA authorized
Jan  1 00:00:26 pppd[492]: local  IP address 14.222.188.190
Jan  1 00:00:26 pppd[492]: remote IP address 10.111.236.1
Jan  1 00:00:26 pppd[492]: primary   DNS address 202.96.128.86
Jan  1 00:00:26 pppd[492]: secondary DNS address 202.96.134.133
Jan  1 00:00:26 pppd[492]: LCP terminated by peer
Jan  1 00:00:26 pppd[492]: Connect time 0.0 minutes.
Jan  1 00:00:26 pppd[492]: Sent 0 bytes, received 0 bytes.
Jan  1 00:00:26 pppd[492]: Modem hangup
Jan  1 00:00:26 pppd[492]: Connection terminated.
Jan  1 00:00:26 pppd[492]: Sent PADT
Jan  1 00:00:26 RT-N14U: WAN up (ppp0)
Jan  1 00:00:26 【QOS】: 最大下载 2560 KB/S,最大上传 256 KB/S
Jan  1 00:00:26 【WebUI】: 稍等后启动相关设置
Jan  1 00:00:26 admin: 运行后 WAN 状态: WAN 状态:【up】, WAN 接口:【ppp0】, WAN IP:【14.222.188.190】
Jan  1 00:00:26 PPPoE: Connected
Jan  1 00:00:26 【QOS】: QOS 没有开启或闪存不足缺模块
Jan  1 00:00:26 【防火墙规则】: 脚本完成
Jan  1 00:00:26 【WebUI】: 稍等后启动相关设置
Jan  1 00:00:26 crond[896]: crond (busybox 1.24.2) started, log level 8
Jan  1 00:00:36 pppd[492]: PPP session is 241 (0xf1)
Jan  1 00:00:36 pppd[492]: Connected to a0:f3:e4:82:13:aa via interface eth2.2
Jan  1 00:00:36 pppd[492]: Using interface ppp0
Jan  1 00:00:36 pppd[492]: Connect: ppp0 <--> eth2.2
Jan  1 00:00:39 pppd[492]: syncppp not active
Jan  1 00:00:39 pppd[492]: Remote message: Login ok
Jan  1 00:00:39 pppd[492]: PAP authentication succeeded
Jan  1 00:00:39 pppd[492]: peer from calling number A0:F3:E4:82:13:AA authorized
Jan  1 00:00:39 pppd[492]: local  IP address 14.119.4.37
Jan  1 00:00:39 pppd[492]: remote IP address 10.111.236.1
Jan  1 00:00:39 pppd[492]: primary   DNS address 202.96.128.86
Jan  1 00:00:39 pppd[492]: secondary DNS address 202.96.134.133
Jan  1 00:00:39 pppd[492]: LCP terminated by peer
Jan  1 00:00:39 pppd[492]: Connect time 0.0 minutes.
Jan  1 00:00:39 pppd[492]: Sent 0 bytes, received 0 bytes.
Jan  1 00:00:39 pppd[492]: Modem hangup
Jan  1 00:00:39 pppd[492]: Connection terminated.
Jan  1 00:00:39 RT-N14U: WAN up (ppp0)
Jan  1 00:00:39 pppd[492]: Sent PADT
Jan  1 00:00:39 【QOS】: 最大下载 2560 KB/S,最大上传 256 KB/S
Jan  1 00:00:39 admin: 运行后 WAN 状态: WAN 状态:【up】, WAN 接口:【ppp0】, WAN IP:【14.119.4.37】
Jan  1 00:00:39 【WebUI】: 稍等后启动相关设置
Jan  1 00:00:39 PPPoE: Connected
Jan  1 00:00:39 【QOS】: QOS 没有开启或闪存不足缺模块
Jan  1 00:00:39 【WebUI】: 稍等后启动相关设置
Jan  1 00:00:39 【防火墙规则】: 脚本完成
Jan  1 00:00:39 crond[1104]: crond (busybox 1.24.2) started, log level 8
Jan  1 00:00:45 【script】: 脚本检查更新
Jan  1 00:00:49 pppd[492]: PPP session is 242 (0xf2)
Jan  1 00:00:49 pppd[492]: Connected to a0:f3:e4:82:13:aa via interface eth2.2
Jan  1 00:00:49 pppd[492]: Using interface ppp0
Jan  1 00:00:49 pppd[492]: Connect: ppp0 <--> eth2.2
Jan  1 00:00:52 pppd[492]: syncppp not active
Jan  1 00:00:52 pppd[492]: Remote message: Login ok
Jan  1 00:00:52 pppd[492]: PAP authentication succeeded
Jan  1 00:00:52 pppd[492]: peer from calling number A0:F3:E4:82:13:AA authorized
Jan  1 00:00:52 pppd[492]: local  IP address 14.119.4.37
Jan  1 00:00:52 pppd[492]: remote IP address 10.111.236.1
Jan  1 00:00:52 pppd[492]: primary   DNS address 202.96.128.86
Jan  1 00:00:52 pppd[492]: secondary DNS address 202.96.134.133
Jan  1 00:00:52 pppd[492]: LCP terminated by peer
Jan  1 00:00:52 pppd[492]: Connect time 0.0 minutes.
Jan  1 00:00:52 pppd[492]: Sent 0 bytes, received 0 bytes.
Jan  1 00:00:52 pppd[492]: Modem hangup
Jan  1 00:00:52 pppd[492]: Connection terminated.
Jan  1 00:00:52 RT-N14U: WAN up (ppp0)
Jan  1 00:00:52 pppd[492]: Sent PADT
Jan  1 00:00:52 【QOS】: 最大下载 2560 KB/S,最大上传 256 KB/S
Jan  1 00:00:52 【WebUI】: 稍等后启动相关设置
Jan  1 00:00:52 admin: 运行后 WAN 状态: WAN 状态:【up】, WAN 接口:【ppp0】, WAN IP:【14.119.4.37】
Jan  1 00:00:52 PPPoE: Connected
Jan  1 00:00:52 【QOS】: QOS 没有开启或闪存不足缺模块
Jan  1 00:00:52 【WebUI】: 稍等后启动相关设置
Jan  1 00:00:52 crond[1247]: crond (busybox 1.24.2) started, log level 8
Jan  1 00:00:52 【防火墙规则】: 脚本完成
Jan  1 00:01:02 pppd[492]: PPP session is 243 (0xf3)
Jan  1 00:01:02 pppd[492]: Connected to a0:f3:e4:82:13:aa via interface eth2.2
Jan  1 00:01:02 pppd[492]: Using interface ppp0
Jan  1 00:01:02 pppd[492]: Connect: ppp0 <--> eth2.2
Jan  1 00:01:05 pppd[492]: syncppp not active
Jan  1 00:01:05 pppd[492]: Remote message: Login ok
Jan  1 00:01:05 pppd[492]: PAP authentication succeeded
Jan  1 00:01:05 pppd[492]: peer from calling number A0:F3:E4:82:13:AA authorized
Jan  1 00:01:05 pppd[492]: local  IP address 14.216.140.235
Jan  1 00:01:05 pppd[492]: remote IP address 10.111.236.1
Jan  1 00:01:05 pppd[492]: primary   DNS address 202.96.128.86
Jan  1 00:01:05 pppd[492]: secondary DNS address 202.96.134.133
Jan  1 00:01:05 pppd[492]: LCP terminated by peer
Jan  1 00:01:05 pppd[492]: Connect time 0.0 minutes.
Jan  1 00:01:05 pppd[492]: Sent 0 bytes, received 0 bytes.
Jan  1 00:01:05 pppd[492]: Modem hangup
Jan  1 00:01:05 pppd[492]: Connection terminated.
Jan  1 00:01:05 RT-N14U: WAN up (ppp0)
Jan  1 00:01:05 pppd[492]: Sent PADT
Jan  1 00:01:05 【QOS】: 最大下载 2560 KB/S,最大上传 256 KB/S
Jan  1 00:01:05 【WebUI】: 稍等后启动相关设置
Jan  1 00:01:05 admin: 运行后 WAN 状态: WAN 状态:【up】, WAN 接口:【ppp0】, WAN IP:【14.216.140.235】
Jan  1 00:01:05 PPPoE: Connected
Jan  1 00:01:05 【QOS】: QOS 没有开启或闪存不足缺模块
Jan  1 00:01:06 【WebUI】: 稍等后启动相关设置
Jan  1 00:01:06 【防火墙规则】: 脚本完成
Jan  1 00:01:06 crond[1403]: crond (busybox 1.24.2) started, log level 8
Jan  1 00:01:15 pppd[492]: PPP session is 244 (0xf4)
Jan  1 00:01:15 pppd[492]: Connected to a0:f3:e4:82:13:aa via interface eth2.2
Jan  1 00:01:15 pppd[492]: Using interface ppp0
Jan  1 00:01:15 pppd[492]: Connect: ppp0 <--> eth2.2
Jan  1 00:01:18 pppd[492]: syncppp not active
Jan  1 00:01:18 pppd[492]: Remote message: Login ok
Jan  1 00:01:18 pppd[492]: PAP authentication succeeded
Jan  1 00:01:18 pppd[492]: peer from calling number A0:F3:E4:82:13:AA authorized
Jan  1 00:01:18 pppd[492]: local  IP address 14.216.140.235
Jan  1 00:01:18 pppd[492]: remote IP address 10.111.236.1
Jan  1 00:01:18 pppd[492]: primary   DNS address 202.96.128.86
Jan  1 00:01:18 pppd[492]: secondary DNS address 202.96.134.133
Jan  1 00:01:18 pppd[492]: LCP terminated by peer
Jan  1 00:01:18 pppd[492]: Connect time 0.0 minutes.
Jan  1 00:01:18 pppd[492]: Sent 0 bytes, received 0 bytes.
Jan  1 00:01:18 pppd[492]: Modem hangup
Jan  1 00:01:18 pppd[492]: Connection terminated.
Jan  1 00:01:18 RT-N14U: WAN up (ppp0)
Jan  1 00:01:18 pppd[492]: Sent PADT
Jan  1 00:01:18 【QOS】: 最大下载 2560 KB/S,最大上传 256 KB/S
Jan  1 00:01:18 【WebUI】: 稍等后启动相关设置
Jan  1 00:01:18 admin: 运行后 WAN 状态: WAN 状态:【up】, WAN 接口:【ppp0】, WAN IP:【14.216.140.235】
Jan  1 00:01:18 PPPoE: Connected
Jan  1 00:01:18 【QOS】: QOS 没有开启或闪存不足缺模块
Jan  1 00:01:19 【WebUI】: 稍等后启动相关设置
Jan  1 00:01:19 【防火墙规则】: 脚本完成
Jan  1 00:01:19 crond[1554]: crond (busybox 1.24.2) started, log level 8
Jan  1 00:01:28 pppd[492]: PPP session is 245 (0xf5)
Jan  1 00:01:28 pppd[492]: Connected to a0:f3:e4:82:13:aa via interface eth2.2
Jan  1 00:01:28 pppd[492]: Using interface ppp0
Jan  1 00:01:28 pppd[492]: Connect: ppp0 <--> eth2.2
Jan  1 00:01:31 pppd[492]: syncppp not active
Jan  1 00:01:31 pppd[492]: Remote message: Login ok
Jan  1 00:01:31 pppd[492]: PAP authentication succeeded
Jan  1 00:01:31 pppd[492]: peer from calling number A0:F3:E4:82:13:AA authorized
Jan  1 00:01:31 pppd[492]: local  IP address 14.216.140.235
Jan  1 00:01:31 pppd[492]: remote IP address 10.111.236.1
Jan  1 00:01:31 pppd[492]: primary   DNS address 202.96.128.86
Jan  1 00:01:31 pppd[492]: secondary DNS address 202.96.134.133
Jan  1 00:01:31 pppd[492]: LCP terminated by peer
Jan  1 00:01:31 pppd[492]: Connect time 0.0 minutes.
Jan  1 00:01:31 pppd[492]: Sent 0 bytes, received 0 bytes.
Jan  1 00:01:31 pppd[492]: Modem hangup
Jan  1 00:01:31 pppd[492]: Connection terminated.
Jan  1 00:01:31 RT-N14U: WAN up (ppp0)
Jan  1 00:01:31 pppd[492]: Sent PADT
Jan  1 00:01:31 【QOS】: 最大下载 2560 KB/S,最大上传 256 KB/S
Jan  1 00:01:31 【WebUI】: 稍等后启动相关设置
Jan  1 00:01:32 admin: 运行后 WAN 状态: WAN 状态:【up】, WAN 接口:【ppp0】, WAN IP:【14.216.140.235】
Jan  1 00:01:32 PPPoE: Connected
Jan  1 00:01:32 【QOS】: QOS 没有开启或闪存不足缺模块
Jan  1 00:01:32 【防火墙规则】: 脚本完成
Jan  1 00:01:32 【WebUI】: 稍等后启动相关设置
Jan  1 00:01:32 crond[1703]: crond (busybox 1.24.2) started, log level 8
Jan  1 00:01:41 pppd[492]: PPP session is 246 (0xf6)
Jan  1 00:01:41 pppd[492]: Connected to a0:f3:e4:82:13:aa via interface eth2.2
Jan  1 00:01:41 pppd[492]: Using interface ppp0
Jan  1 00:01:41 pppd[492]: Connect: ppp0 <--> eth2.2
Jan  1 00:01:45 pppd[492]: syncppp not active
Jan  1 00:01:45 pppd[492]: Remote message: Login ok
Jan  1 00:01:45 pppd[492]: PAP authentication succeeded
Jan  1 00:01:45 pppd[492]: peer from calling number A0:F3:E4:82:13:AA authorized
Jan  1 00:01:45 pppd[492]: local  IP address 14.222.189.95
Jan  1 00:01:45 pppd[492]: remote IP address 10.111.236.1
Jan  1 00:01:45 pppd[492]: primary   DNS address 202.96.128.86
Jan  1 00:01:45 pppd[492]: secondary DNS address 202.96.134.133
Jan  1 00:01:45 pppd[492]: LCP terminated by peer
Jan  1 00:01:45 pppd[492]: Connect time 0.0 minutes.
Jan  1 00:01:45 pppd[492]: Sent 0 bytes, received 0 bytes.
Jan  1 00:01:45 RT-N14U: WAN up (ppp0)
Jan  1 00:01:45 pppd[492]: Modem hangup
Jan  1 00:01:45 pppd[492]: Connection terminated.
Jan  1 00:01:45 pppd[492]: Sent PADT
Jan  1 00:01:45 【QOS】: 最大下载 2560 KB/S,最大上传 256 KB/S
Jan  1 00:01:45 【WebUI】: 稍等后启动相关设置
Jan  1 00:01:45 admin: 运行后 WAN 状态: WAN 状态:【up】, WAN 接口:【ppp0】, WAN IP:【14.222.189.95】
Jan  1 00:01:45 PPPoE: Connected
Jan  1 00:01:45 【QOS】: QOS 没有开启或闪存不足缺模块
Jan  1 00:01:45 【防火墙规则】: 脚本完成
Jan  1 00:01:45 【WebUI】: 稍等后启动相关设置
Jan  1 00:01:45 crond[1844]: crond (busybox 1.24.2) started, log level 8
Jan  1 00:01:55 pppd[492]: PPP session is 247 (0xf7)
Jan  1 00:01:55 pppd[492]: Connected to a0:f3:e4:82:13:aa via interface eth2.2
Jan  1 00:01:55 pppd[492]: Using interface ppp0
Jan  1 00:01:55 pppd[492]: Connect: ppp0 <--> eth2.2
Jan  1 00:01:58 pppd[492]: syncppp not active
Jan  1 00:01:58 pppd[492]: Remote message: Login ok
Jan  1 00:01:58 pppd[492]: PAP authentication succeeded
Jan  1 00:01:58 pppd[492]: peer from calling number A0:F3:E4:82:13:AA authorized
Jan  1 00:01:58 pppd[492]: local  IP address 14.222.189.51
Jan  1 00:01:58 pppd[492]: remote IP address 10.111.236.1
Jan  1 00:01:58 pppd[492]: primary   DNS address 202.96.128.86
Jan  1 00:01:58 pppd[492]: secondary DNS address 202.96.134.133
Jan  1 00:01:58 pppd[492]: LCP terminated by peer
Jan  1 00:01:58 pppd[492]: Connect time 0.0 minutes.
Jan  1 00:01:58 pppd[492]: Sent 0 bytes, received 0 bytes.
Jan  1 00:01:58 pppd[492]: Modem hangup
Jan  1 00:01:58 pppd[492]: Connection terminated.
Jan  1 00:01:58 pppd[492]: Sent PADT
Jan  1 00:01:58 RT-N14U: WAN up (ppp0)
Jan  1 00:01:58 【QOS】: 最大下载 2560 KB/S,最大上传 256 KB/S
Jan  1 00:01:58 【WebUI】: 稍等后启动相关设置
Jan  1 00:01:58 admin: 运行后 WAN 状态: WAN 状态:【up】, WAN 接口:【ppp0】, WAN IP:【14.222.189.51】
Jan  1 00:01:58 PPPoE: Connected
Jan  1 00:01:58 【QOS】: QOS 没有开启或闪存不足缺模块
Jan  1 00:01:58 【WebUI】: 稍等后启动相关设置
Jan  1 00:01:59 【防火墙规则】: 脚本完成
Jan  1 00:01:59 crond[2018]: crond (busybox 1.24.2) started, log level 8
Jan  1 00:02:08 pppd[492]: PPP session is 248 (0xf8)
Jan  1 00:02:08 pppd[492]: Connected to a0:f3:e4:82:13:aa via interface eth2.2
Jan  1 00:02:08 pppd[492]: Using interface ppp0
Jan  1 00:02:08 pppd[492]: Connect: ppp0 <--> eth2.2
Jan  1 00:02:11 pppd[492]: syncppp not active
Jan  1 00:02:11 pppd[492]: Remote message: Login ok
Jan  1 00:02:11 pppd[492]: PAP authentication succeeded
Jan  1 00:02:11 pppd[492]: peer from calling number A0:F3:E4:82:13:AA authorized
Jan  1 00:02:11 pppd[492]: local  IP address 14.222.190.179
Jan  1 00:02:11 pppd[492]: remote IP address 10.111.236.1
Jan  1 00:02:11 pppd[492]: primary   DNS address 202.96.128.86
Jan  1 00:02:11 pppd[492]: secondary DNS address 202.96.134.133
Jan  1 00:02:11 pppd[492]: LCP terminated by peer
Jan  1 00:02:11 pppd[492]: Connect time 0.0 minutes.
Jan  1 00:02:11 pppd[492]: Sent 0 bytes, received 0 bytes.
Jan  1 00:02:11 pppd[492]: Modem hangup
Jan  1 00:02:11 pppd[492]: Connection terminated.
Jan  1 00:02:11 pppd[492]: Sent PADT
Jan  1 00:02:11 RT-N14U: WAN up (ppp0)
Jan  1 00:02:11 【QOS】: 最大下载 2560 KB/S,最大上传 256 KB/S
Jan  1 00:02:11 【WebUI】: 稍等后启动相关设置
Jan  1 00:02:11 admin: 运行后 WAN 状态: WAN 状态:【up】, WAN 接口:【ppp0】, WAN IP:【14.222.190.179】
Jan  1 00:02:11 PPPoE: Connected
Jan  1 00:02:11 【QOS】: QOS 没有开启或闪存不足缺模块
Jan  1 00:02:11 【WebUI】: 稍等后启动相关设置
Jan  1 00:02:11 crond[2169]: crond (busybox 1.24.2) started, log level 8
Jan  1 00:02:11 【防火墙规则】: 脚本完成
Jan  1 00:02:15 【script】: 脚本不需更新
Jan  1 00:02:16 【自定义脚本0】: 脚本完成
Jan  1 00:02:16 dnsmasq[383]: exiting on receipt of SIGTERM
Jan  1 00:02:16 dnsmasq[2365]: started, version 2.76 cachesize 1024
Jan  1 00:02:16 dnsmasq[2365]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Jan  1 00:02:16 dnsmasq-dhcp[2365]: DHCP, IP range 192.168.199.2 -- 192.168.199.244, lease time 1d
Jan  1 00:02:16 dnsmasq-dhcp[2365]: DHCP, sockets bound exclusively to interface br0
Jan  1 00:02:16 dnsmasq[2365]: read /etc/hosts - 3 addresses
Jan  1 00:02:16 dnsmasq[2365]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan  1 00:02:16 dnsmasq-dhcp[2365]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan  1 00:02:16 【网络检测】: 互联网状态:12, 经过时间:ts.
Jan  1 00:02:16 【连接 AP】: 12秒后, 自动搜寻 ap
Jan  1 00:02:21 pppd[492]: PPP session is 249 (0xf9)
Jan  1 00:02:21 pppd[492]: Connected to a0:f3:e4:82:13:aa via interface eth2.2
Jan  1 00:02:21 pppd[492]: Using interface ppp0
Jan  1 00:02:21 pppd[492]: Connect: ppp0 <--> eth2.2
Jan  1 00:02:24 pppd[492]: syncppp not active
Jan  1 00:02:24 pppd[492]: Remote message: Login ok
Jan  1 00:02:24 pppd[492]: PAP authentication succeeded
Jan  1 00:02:24 pppd[492]: peer from calling number A0:F3:E4:82:13:AA authorized
Jan  1 00:02:24 pppd[492]: local  IP address 14.120.97.245
Jan  1 00:02:24 pppd[492]: remote IP address 10.111.236.1
Jan  1 00:02:24 pppd[492]: primary   DNS address 202.96.128.86
Jan  1 00:02:24 pppd[492]: secondary DNS address 202.96.134.133
Jan  1 00:02:24 pppd[492]: LCP terminated by peer
Jan  1 00:02:24 pppd[492]: Connect time 0.0 minutes.
Jan  1 00:02:24 pppd[492]: Sent 0 bytes, received 0 bytes.
Jan  1 00:02:24 RT-N14U: WAN up (ppp0)
Jan  1 00:02:24 pppd[492]: Modem hangup
Jan  1 00:02:24 pppd[492]: Connection terminated.
Jan  1 00:02:24 pppd[492]: Sent PADT
Jan  1 00:02:24 【QOS】: 最大下载 2560 KB/S,最大上传 256 KB/S
Jan  1 00:02:24 【WebUI】: 稍等后启动相关设置
Jan  1 00:02:24 admin: 运行后 WAN 状态: WAN 状态:【up】, WAN 接口:【ppp0】, WAN IP:【14.120.97.245】
Jan  1 00:02:24 PPPoE: Connected
Jan  1 00:02:25 【QOS】: QOS 没有开启或闪存不足缺模块
Jan  1 00:02:25 【WebUI】: 稍等后启动相关设置
Jan  1 00:02:25 【防火墙规则】: 脚本完成
Jan  1 00:02:25 crond[2502]: crond (busybox 1.24.2) started, log level 8
Jan  1 00:02:28 【连接 AP】: 脚本完成
Jan  1 00:02:28 【MentoHUST】: 关闭
Jan  1 00:02:34 pppd[492]: PPP session is 250 (0xfa)
Jan  1 00:02:34 pppd[492]: Connected to a0:f3:e4:82:13:aa via interface eth2.2
Jan  1 00:02:34 pppd[492]: Using interface ppp0
Jan  1 00:02:34 pppd[492]: Connect: ppp0 <--> eth2.2
Jan  1 00:02:34 pppd[492]: syncppp not active
Jan  1 00:02:34 pppd[492]: Remote message: Login ok
Jan  1 00:02:34 pppd[492]: PAP authentication succeeded
Jan  1 00:02:34 pppd[492]: peer from calling number A0:F3:E4:82:13:AA authorized
Jan  1 00:02:34 pppd[492]: local  IP address 14.222.191.110
Jan  1 00:02:34 pppd[492]: remote IP address 10.111.236.1
Jan  1 00:02:34 pppd[492]: primary   DNS address 202.96.128.86
Jan  1 00:02:34 pppd[492]: secondary DNS address 202.96.134.133
Jan  1 00:02:34 pppd[492]: LCP terminated by peer
Jan  1 00:02:34 pppd[492]: Connect time 0.0 minutes.
Jan  1 00:02:34 pppd[492]: Sent 0 bytes, received 0 bytes.
Jan  1 00:02:34 pppd[492]: Modem hangup
Jan  1 00:02:34 pppd[492]: Connection terminated.
Jan  1 00:02:34 RT-N14U: WAN up (ppp0)
Jan  1 00:02:34 pppd[492]: Sent PADT
Jan  1 00:02:34 【QOS】: 最大下载 2560 KB/S,最大上传 256 KB/S
Jan  1 00:02:34 【WebUI】: 稍等后启动相关设置
Jan  1 00:02:34 admin: 运行后 WAN 状态: WAN 状态:【up】, WAN 接口:【ppp0】, WAN IP:【14.222.191.110】
Jan  1 00:02:34 PPPoE: Connected
Jan  1 00:02:35 【QOS】: QOS 没有开启或闪存不足缺模块
Jan  1 00:02:35 【WebUI】: 稍等后启动相关设置
Jan  1 00:02:35 crond[2694]: crond (busybox 1.24.2) started, log level 8
Jan  1 00:02:35 【防火墙规则】: 脚本完成
Jan  1 00:02:44 kernel: mtk_esw: Link Status Changed - Port WAN Link Down

1551***

为什么设置好了SS  谷歌邮箱和youtube打不开呢？是不是哪里没设置好？还是。。。。

为失足***

感谢分享，论坛有你更精彩！真诚的为你顶贴，让您的贴子不再下沉！

jaysh***

摄魂 发表于 2016-8-24 09:54
L大，设置目前来看是没有问题的，SS账号和IP和端口密码加密模式都没有问题，其他都是固件默认，我就开了S ...

重置SS的IP规则试试

wm***

Love4Taylor 发表于 2016-9-3 12:42
自己查 getpeername: Transport endpoint is not connected 的错误
和固件无关

那肯定被和谐了，设置肯定没问题，之前用的很正常，就昨天开始不能用了。

dev***

谢谢分享好东西

dev***

不错学习了  正在刷小米2路由

llddp***

优酷L1刷的上次更新的改华硕固件，路由宝插件是不是让官方封了，9月1日开始没收益了，而且一个问题是 插件不时丢失重启，大约10~17分钟重启一次

喵***

Sep  3 15:30:56 【SS】: SS服务器1 设置内容：jp1.agro.hk 端口:1092 加密方式:rc4-md5
Sep  3 15:30:56 【ss-redir】: 启动所有的 SS 连线, 出现的 SS 日志并不是错误报告, 只是使用状态日志, 请不要慌张, 只要系统正常你又看不懂就无视它！
Sep  3 15:30:56 ss-redir[11028]: initializing ciphers... rc4-md5
Sep  3 15:30:56 ss-redir[11028]: UDP relay enabled
Sep  3 15:30:56 ss-redir[11028]: listening at 0.0.0.0:1090
Sep  3 15:30:57 crond[11073]: crond (busybox 1.24.2) started, log level 8
Sep  3 15:30:59 SS: 脚本完成
Sep  3 15:30:59 【SS】: 检测:找不到 SS_SPEC 转发规则, 重新添加
Sep  3 15:31:00 SS: 脚本完成
Sep  3 15:31:00 【SS】: 设置 SS 的防火墙规则
Sep  3 15:31:00 【SS】: 出国模式
Sep  3 15:31:00 【SS】: 设置内网(LAN)访问控制
Sep  3 15:31:00 【SS】: pdnsd 模式:0, 0走代理 1直连
Sep  3 15:31:00 【SS】: 外网(WAN)访问控制，设置 WAN IP 转发或忽略代理中转
Sep  3 15:31:02 crond[11723]: crond (busybox 1.24.2) started, log level 8

今天看到固件更新，更新完后重启SS无法启动了，有谁知道是什么问题么？