求教，hg100n路由器连接ttl登陆后输入e n后再登陆就显示密码错误。

13859024

我就这样弄了之后，就登陆不了ttl的终端的login
Erase all flash (except bootrom)? (y/n):y
No image tag found.  Erase the blocks start at [1]
..............................................................................

Resetting board...HELO
CPUI
L1CI
DRAM
----
PHYS
ZQDN
PHYE
DINT
LSYN
USYN
MSYN
LMBE
PASS
----
ZBSS
CODE
DATA
L12F
MAIN


CFE version 1.7.37-104.5 for BCM96328 (32bit,SP,BE)
Build Date: Tue Oct 25 12:00:18 CST 2011 (tyrone@sw3-code-build-srv-02)
Copyright (C) 2000-2009 Broadcom Corporation.

HS Serial flash device: name MX25L32, id 0xc216 size 4096KB
Total Flash size: 4096K with 79 sectors
Flash not used for Auxillary File System
Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz
Main Thread: TP0
Memory Test Passed
Total Memory: 67108864 bytes (64MB)
Boot Address: 0xb8000000

** Flash image not found. **

Board IP address                  : 192.168.1.1:ffffff00  
Host IP address                   : 192.168.1.100  
Gateway IP address                :   
Run from flash/host (f/h)         : f  
Default host run file name        : vmlinux  
Default host flash file name      : bcm963xx_fs_kernel  
Boot delay (0-9 seconds)          : 1  
Board Id (0-7)                    : DSL100N-B1 v2  
Number of MAC Addresses (1-32)    : 5  
Base MAC Address                  : c8:6c:87:cb:d9:bb  
PSI Size (1-64) KBytes            : 20  
Enable Backup PSI [0|1]           : 1  
System Log Size (0-256) KBytes    : 8  
Flash Block Size (1-128) in KBytes: 64  
Auxillary File System Size Percent: 0  
Main Thread Number [0|1]          : 0  
Serial Number                     : 4F200C86C87CBD9BB  
Password for Useradmin            : tmhhq  
SSID for first wireless (10-31)   : ChinaNet-yPRJ  
Password for first wireless (8-31): ygp9gkef  
PA(e=External PA,i=Internal PA)   : i  
Minimal Core Max Size (0-2097152) in Bytes: 0  

The Max Size of Minimal Core is 0, can't boot Minimal Core Successfully

login:telecomadmin
Password:
web info: Waiting for connection on socket 0.
web info: Waiting for connection on socket 1.
web info: Waiting for connection on socket 2.
CFE> e n
Erase nvram? (y/n):y

Resetting board...HELO
CPUI
L1CI
DRAM
----
PHYS
ZQDN
PHYE
DINT
LSYN
USYN
MSYN
LMBE
PASS
----
ZBSS
CODE
DATA
L12F
MAIN


CFE version 1.7.37-104.5 for BCM96328 (32bit,SP,BE)
Build Date: Tue Oct 25 12:00:18 CST 2011 (tyrone@sw3-code-build-srv-02)
Copyright (C) 2000-2009 Broadcom Corporation.

HS Serial flash device: name MX25L32, id 0xc216 size 4096KB

*** Board is not initialized properly ***

Press:  <enter> to use current value
        '-' to go previous parameter
        '.' to clear the current value
        'x' to exit this command
96328avng        ------- 0
HGW-2501N-B      ------- 1
HGW-2501HNU-B    ------- 2
HGW-500HNU-B     ------- 3
DSL100N-B1 v2    ------- 4
DSL2101HNU-B1    ------- 5
DSL-2101N-B1     ------- 6
HGW-2502HNU-B    ------- 7
Board Id (0-7)                    :  0
Number of MAC Addresses (1-32)    :  10  
Base MAC Address                  :  00:10:18:00:00:00  
PSI Size (1-64) KBytes            :  24  
Enable Backup PSI [0|1]           :  0  
System Log Size (0-256) KBytes    :  0  
Flash Block Size (1-128) in KBytes:  64  
Auxillary File System Size Percent:  0  
Main Thread Number [0|1]          :  0  
Serial Number                     :  47900001FA3B98504  
Serial Number is *47900001FA3B98504*
Password for Useradmin            :  0019cb000001  
Password for useradmin is *0019cb000001*
SSID for first wireless (10-31)   :  Huatian  
ssid for wireless is *Huatian*
Password for first wireless (8-31):  0019cb000001  
Password for wireless is *0019cb000001*
PA(e=External PA,i=Internal PA)   :  i  
PA type is *i*
Minimal Core Max Size (0-2097152) in Bytes:  0  
Total Flash size: 4096K with 79 sectors
Flash not used for Auxillary File System
Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz
Main Thread: TP0
Memory Test Passed
Total Memory: 67108864 bytes (64MB)
Boot Address: 0xb8000000

Use default boot line parameters: e=192.168.1.1:ffffff00 h=192.168.1.100 g= r=f f=vmlinux i=bcm963xx_fs_kernel d=1 p=0
** Flash image not found. **

Board IP address                  : 192.168.1.1:ffffff00  
Host IP address                   : 192.168.1.100  
Gateway IP address                :   
Run from flash/host (f/h)         : f  
Default host run file name        : vmlinux  
Default host flash file name      : bcm963xx_fs_kernel  
Boot delay (0-9 seconds)          : 1  
Board Id (0-7)                    : 96328avng  
Number of MAC Addresses (1-32)    : 10  
Base MAC Address                  : 00:10:18:00:00:00  
PSI Size (1-64) KBytes            : 24  
Enable Backup PSI [0|1]           : 0  
System Log Size (0-256) KBytes    : 0  
Flash Block Size (1-128) in KBytes: 64  
Auxillary File System Size Percent: 0  
Main Thread Number [0|1]          : 0  
Serial Number                     : 47900001FA3B98504  
Password for Useradmin            : 0019cb000001  
SSID for first wireless (10-31)   : Huatian  
Password for first wireless (8-31): 0019cb000001  
PA(e=External PA,i=Internal PA)   : i  
Minimal Core Max Size (0-2097152) in Bytes: 0  

The Max Size of Minimal Core is 0, can't boot Minimal Core Successfully
login:
login:telecomadmin
Passwordogin failed, invalid password
login:

13859024

求大神来解答。