ar7161刮u加usb错误代码 大神来看看 怎么办

hi***

[    7.680000] usbcore: registered new interface driver usbfs
[    7.680000] usbcore: registered new interface driver hub
[    7.690000] usbcore: registered new device driver usb
[    7.720000] SCSI subsystem initialized
[    7.730000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.740000] ehci-platform: EHCI generic platform driver
[    7.740000] ehci-platform ehci-platform: EHCI Host Controller
[    7.750000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    7.760000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    7.780000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    7.780000] hub 1-0:1.0: USB hub found
[    7.790000] hub 1-0:1.0: 2 ports detected
[    7.790000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    7.800000] ohci-platform ohci-platform: Generic Platform OHCI Controller
[    7.810000] ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
[    7.810000] ohci-platform ohci-platform: irq 14, io mem 0x1c000000
[    7.880000] hub 2-0:1.0: USB hub found
[    7.880000] hub 2-0:1.0: 2 ports detected
[    7.890000] uhci_hcd: USB Universal Host Controller Interface driver
[    7.900000] usbcore: registered new interface driver usb-storage
[    8.660000] usb 2-1: new low-speed USB device number 2 using ohci-platform
[    8.850000] usb 2-1: device descriptor read/64, error -62
[    9.140000] usb 2-1: device descriptor read/64, error -62
[    9.430000] usb 2-1: new low-speed USB device number 3 using ohci-platform
[    9.620000] usb 2-1: device descriptor read/64, error -62
[    9.910000] usb 2-1: device descriptor read/64, error -62
[   10.200000] usb 2-1: new low-speed USB device number 4 using ohci-platform
[   10.620000] usb 2-1: device not accepting address 4, error -62
[   10.800000] usb 2-1: new low-speed USB device number 5 using ohci-platform
[   11.220000] usb 2-1: device not accepting address 5, error -62
[   11.220000] hub 2-0:1.0: unable to enumerate USB device on port 1

hi***

现在是这个提示 不知道是什么意思
[   70.990000] usb 1-1: new high-speed USB device number 3 using ehci-platform
[   71.150000] hub 1-1:1.0: USB hub found
[   71.150000] hub 1-1:1.0: 7 ports detected
[   78.680000] usb 1-1.1: new high-speed USB device number 4 using ehci-platform
[   78.820000] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[   78.820000] scsi1 : usb-storage 1-1.1:1.0
[   79.830000] scsi 1:0:0:0: Direct-Access     IT1167B  USB Flash Disk   0.00 PQ: 0 ANSI: 2
[   79.840000] sd 1:0:0:0: [sda] 31711232 512-byte logical blocks: (16.2 GB/15.1 GiB)
[   79.850000] sd 1:0:0:0: [sda] Write Protect is off
[   79.850000] sd 1:0:0:0: [sda] Mode Sense: 00 00 00 00
[   79.860000] sd 1:0:0:0: [sda] Asking for cache data failed
[   79.860000] sd 1:0:0:0: [sda] Assuming drive cache: write through
[   79.870000] sd 1:0:0:0: [sda] Asking for cache data failed
[   79.880000] sd 1:0:0:0: [sda] Assuming drive cache: write through
[   79.890000]  sda: sda1
[   79.910000] sd 1:0:0:0: [sda] Asking for cache data failed
[   79.910000] sd 1:0:0:0: [sda] Assuming drive cache: write through
[   79.920000] sd 1:0:0:0: [sda] Attached SCSI removable disk
[  139.370000] FAT-fs (sda1): IO charset iso8859-1 not found

1065***

能给个AR7161的针脚定义图吗谢谢

hi***

10655166 发表于 2015-12-27 18:21
能给个AR7161的针脚定义图吗谢谢

一楼不是有附件的吗
打开就看到了

1065***

hijk1 发表于 2015-12-27 18:45
一楼不是有附件的吗
打开就看到了

没看到有附件啊，你加晶振没AR7161要加USB加晶振的