设为首页收藏本站

简体中文 繁體中文 English 日本語 Deutsch 한국 사람 بالعربية TÜRKÇE português คนไทย

切换到窄版

 找回密码
 立即注册

QQ登录

只需一步，快速开始

搜索
恩山无线论坛»论坛 › 无线设备软件相关板块 › TOMATO专版 › 我的8230改128M内存过程，8230刷Tomato的朋友进来就有惊 ...
广告投放联系QQ68610888
12345下一页
返回列表 发新帖
楼主: rig***

我的8230改128M内存过程，8230刷Tomato的朋友进来就有惊喜

[复制链接]
| 显示全部楼层
麻烦rightzd兄指点，感谢

顺便说一句，cpu被我小超频了，不过300M在原厂cfe的时候十分稳定，应该不是这个原因

CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Mon Dec 26 17:51:02 CST 2005 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena
Initializing Devices.

No DPN
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.37.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
et1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.37.0
CPU type 0x29006: 300MHz
Total memory: 32768 KBytes

Total memory used by CFE:  0x80300000 - 0x803A39C0 (670144)
Initialized Data:          0x803398D0 - 0x8033BFE0 (10000)
BSS Area:                  0x8033BFE0 - 0x8033D9C0 (6624)
Local Heap:                0x8033D9C0 - 0x803A19C0 (409600)
Stack Area:                0x803A19C0 - 0x803A39C0 (8192)
Text (code) segment:       0x80300000 - 0x803398D0 (235728)
Boot area (physical):      0x003A4000 - 0x003E4000
Relocation Factor:         I:00000000 - D:00000000

Boot version: v3.7
The boot is CFE

No mac find, use default mac

eou_key_init(): Find key pair in location 0
The eou device id is same
The eou public key is same
The eou private key is same
Device eth0:  hwaddr 00-11-50-2F-12-04, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Reading :: Failed.: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3920 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029006
Linux version 2.4.35 (eko@dd-wrt) (gcc version 3.4.4 (OpenWrt-2.0)) #3067 Thu Apr 23 14:39:51 CEST 2009
Setting the PFC to its default value
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
CPU: BCM4704 rev 8 at 300 MHz
Using 150.000 MHz high precision timer.
Calibrating delay loop... 299.00 BogoMIPS
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
PCI: Initializing host
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bus 1
Initializing RT netlink socket
Starting kswapd
pty: 256 Unix98 ptys configured
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
ip_conntrack version 2.1 (512 buckets, 4096 max) - 336 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_random match loaded
netfilter PSD loaded - (c) astaro AG
ipt_IPV4OPTSSTRIP loaded
VFS: Mounted root (squashfs filesystem) readonly.
starting Architecture code for broadcom
Booting device: Linksys WRTSL54GS
boardflags are 0x0018
enable Afterburner, boardflags are 0x0218
eth2: No such device
PCI: Enabling device 01:01.0 (0004 -> 0006)
eth2: Broadcom BCM4318 802.11 Wireless Controller 4.80.56.0
sh: can't create /proc/sys/net/ipv4/tcp_congestion_control: nonexistent directory
eth2: Operation not supported
wl0.1: No such device
wl0.2: No such device
wl0.3: No such device
eth2: Operation not supported
eth2: Invalid argument
eth2: Invalid argument
br0: Bad file descriptor
br0: Bad file descriptor
eth2: Operation not supported
wl0.1: No such device
wl0.2: No such device
wl0.3: No such device
eth2: Operation not supported
eth2: Invalid argument
eth2: Invalid argument
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
Key is a RSA key
Wrote key to '/tmp/root/.ssh/ssh_host_rsa_key'
Key is a DSS key
Wrote key to '/tmp/root/.ssh/ssh_host_dss_key'
eth1: No such process
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
sh: /tmp/.rc_startup: not found

[ 本帖最后由 bestdoctors 于 2009-4-27 23:35 编辑 ]
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

54***
| 显示全部楼层
300M HZ 和260M 差不多。
超的意义不大，个人感觉。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

keny***
| 显示全部楼层
GPIO的问题怎么样了？无线LED灯怎么才能正常工作？
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

rig***
 楼主| | 显示全部楼层
回48楼，看这个log的描述是引导openwrt后有线网卡没有驱动成功，只有无线网卡认出来。

CFE阶段能认到有线网卡
No DPN
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.37.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
et1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.37.0
CPU type 0x29006: 300MHz
Total memory: 32768 KBytes


openwrt内核部分只认到无线网卡
PCI: Enabling device 01:01.0 (0004 -> 0006)
eth2: Broadcom BCM4318 802.11 Wireless Controller 4.80.56.0
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

| 显示全部楼层
难怪了，我从TTL里面能进入openwrt，却从有线网卡死活访问不了，而openwrt默认是关闭有线网卡的

因为8230 SD的加载的问题尚未解决，所以，还是打消玩openwrt的念头了
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

| 显示全部楼层
晚上继续测试，虽然麻烦，不过这8230确实经得了折腾，随我如何刷写，就是死不了

wrtsl54gs的cfe发现不稳定，就换了300n的，这次换300n又发现一个现象，在我完成好一切设置之后能够上网了，同时开了迅雷和bt下载，表现尚还稳定。但是我一旦输入超频的那几条命令，nvram set clkfreq，然后重启，就再也启动不了了

从TTL 里面居然看不到任何一条的启动信息，根本就是完全死了一样。难道是这条超频的命令也导致wrtsl54gs的cfe不稳定？很有可能。

但是，在原厂cfe下，超频至300M却是十分的稳定，任我如何增加负载，坚如磐石

[ 本帖最后由 bestdoctors 于 2009-4-28 21:30 编辑 ]
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

| 显示全部楼层
现在刷的是300N，没有超频，简单的做了一些设置，上网。

看看信息

CPU ProcId is: 0x00029006, options: 0x0000004d
Linux version 2.4.37 (eko@dd-wrt) (gcc version 3.4.6 (OpenWrt-2.0)) #3371 Thu Apr 23 12:58:20 CEST 2009
Setting the PFC to its default value
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblookle=ttyS0,115200
CPU: BCM4704 rev 8 at 264 MHz
Using 132.000 MHz high precision timer.
Calibrating delay loop... 263.78 BogoMIPS
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
PCI: Initializing host
PCI: Enabling CardBus
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Setting latency timer of device 01:00.0 to 64
PCI: Fixing up bus 1
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
PCI: Setting latency timer of device 00:01.0 to 64
PCI: Setting latency timer of device 00:02.0 to 64
PCI: Setting latency timer of device 01:01.0 to 64
PCI: Enabling device 01:01.0 (0004 -> 0006)
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Flash device: 0x400000 at 0x1c000000
bootloader size: 262144
Physically mapped flash: Filesystem type: squashfs, size=0x2ad618
partition size = 2872320
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x003f0000 : "linux"
0x00122c00-0x003e0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x003f0000-0x00400000 : "nvram"
0x003e0000-0x003f0000 : "ddwrt"
sflash not supported on this router
Initializing Cryptographic API
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
ip_conntrack version 2.1 (512 buckets, 4096 max) - 336 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_random match loaded
netfilter PSD loaded - (c) astaro AG
ipt_osf: Startng OS fingerprint matching module.
ipt_IPV4OPTSSTRIP loaded
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
device eth0 entered promiscuous mode
device eth2 entered promiscuous mode
device eth1 entered promiscuous mode
device eth1 left promiscuous mode
device eth0 left promiscuous mode
device eth2 left promiscuous mode
device eth0 entered promiscuous mode
device eth2 entered promiscuous mode
device eth0 left promiscuous mode
device eth2 left promiscuous mode
device eth0 entered promiscuous mode
device eth2 entered promiscuous mode
device eth1 entered promiscuous mode
device eth1 left promiscuous mode
device eth0 left promiscuous mode
device eth2 left promiscuous mode
device eth0 entered promiscuous mode
device eth2 entered promiscuous mode
device eth1 entered promiscuous mode
device eth1 left promiscuous mode
device eth1 entered promiscuous mode
device eth1 left promiscuous mode
device eth0 left promiscuous mode
device eth2 left promiscuous mode
device eth0 entered promiscuous mode
device eth2 entered promiscuous mode
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

| 显示全部楼层
原帖由 5417 于 2009-4-27 12:32 发表
  
rightzd有空，用Beyond Compare比较下，看看结果。

对了，我的128M内存，默认识别64M，一激活128M就挂的问题，你有什么高见？



第一个可能、那颗电阻你补上了么？

第二个可能、你的内存颗粒有问题，特别是靠近底部的那颗。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

| 显示全部楼层

本帖子中包含更多资源

您需要 登录 才可以下载或查看，没有账号？立即注册

×
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

yua***
| 显示全部楼层
太强了，只有佩服了
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

54***
| 显示全部楼层
第一个可能、那颗电阻你补上了么？

第二个可能、你的内存颗粒有问题，特别是靠近底部的那颗。
恩山无线 发表于 2009-4-30 10:41


十分感谢老大的回复。
r33电阻，原来就有啊。
我的buffalo WZR-G108，原配的内存是 16Mx 2片，32M DDRSDRAM的。

今天又搞了一整天，把两片又换了2个芯片，还是只有64M，激活128M，就挂。
郁闷到了极点了！。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

54***
| 显示全部楼层
十分感谢老大的回复。
r33电阻，原来就有啊。
我的buffalo WZR-G108，原配的内存是 16Mx 2片，32M DDRSDRAM的。

今天又搞了一整天，把两片又换了2个芯片，还是只有64M，激活128M，就挂。
郁闷到了极点了！ ...
5417 发表于 2009-5-4 01:19



各位，小弟的G108已经可以激活128M内存。
过程就略了。太多的体力劳动。

前面不能激活的原因是，我的HY DDR芯片的体质问题。
不能使用nvram set sdram_ncdl=0x0这个参数。

直接
nvram set sdram_init=0x0011
nvram commit
reboot
即可激活128M。

走了个大弯路。焊坏了一个64M的芯片。买了2个烙铁头。
耗费了至少24小时的手工。错过若干电视节目。
期间，顺便给RA100A的ADSL升级64M内存。

最后感谢下 楼主。感谢大猫，恩山和关注过此问题的看官。
呵呵，从此焊接内存芯片的自信大增。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

mv***
| 显示全部楼层
我是16M的8230，可以直接用LZ提供的那个CFE刷吗？
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

lion***
| 显示全部楼层
  1. 劉明
复制代码
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

mv***
| 显示全部楼层
LZ下一步朝8M FLASH 进军啊，刷DDWRT MEGA版本
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

12345下一页
返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

欢迎大家光临恩山无线论坛上一条 /1 下一条

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-4-30 02:27

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱：js12377 | @jischina.com.cn 举报电话：025-88802724 本站不良内容举报信箱：68610888@qq.com 举报电话：0519-86695797

快速回复 返回顶部 返回列表