|
本帖最后由 王子殿下 于 2017-9-1 18:14 编辑
手里有个淘汰下来的腾达N4,突然想折腾一下中继,就想把他给刷了。。以前手贱升级到了9.4.2.16web升级固件一律文件不能超过704kb!!
幸亏我是工科男东西丰富手里恰好有stc- isp自动下载器本质就是一个usb转ttl,据说短接AUTO端和gnd就可以当,usb转ttl用了。。又从论坛找了固件,,焊好了ttl线,,测试ttl没问题,
万事具备只欠东风。
- U-Boot 1.1.3 (Feb 14 2011 - 02:39:31)
- Board: Ralink APSoC DRAM: 8 MB
- relocate_code Pointer at: 807b4000
- spi_wait_nsec: 42
- spi device id: ef 40 14 0 0 (40140000)
- Warning: un-recognized chip ID, please update bootloader!
- raspi_read: from:30000 len:1000
- .*** Warning - bad CRC, using default environment
- ============================================
- Ralink UBoot Version: 3.5.2.0
- --------------------------------------------
- ASIC 5350_MP (Port5<->None)
- DRAM_CONF_FROM: Boot-Strapping
- DRAM_TYPE: SDRAM
- DRAM_SIZE: 64 Mbits
- DRAM_WIDTH: 16 bits
- DRAM_TOTAL_WIDTH: 16 bits
- TOTAL_MEMORY_SIZE: 8 MBytes
- Flash component: SPI Flash
- Date:Feb 14 2011 Time:02:39:31
- ============================================
- icache: sets:256, ways:4, linesz:32 ,total:32768
- dcache: sets:128, ways:4, linesz:32 ,total:16384
- ##### The CPU freq = 360 MHZ ####
- estimate memory size =8 Mbytes
- Please choose the operation:
- 1: Load system code to SDRAM via TFTP.
- 2: Load system code then write to Flash via TFTP.
- 3: Boot system code via Flash (default).
- 4: Entr boot command line interface.
- 7: Load Boot Loader code then write to Flash via Serial.
- 9: Load Boot Loader code then write to Flash via TFTP.
- <font color="#ff0000">You choosed 3</font>
- 0
-
- <font color="#ff0000">3: System Boot system code via Flash.</font>
- ## Booting image at bc050000 ...
复制代码
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有账号?立即注册
×
|