k3救砖ttl一直出这个，下一步怎么弄啊！

fengzhe***

cfe是不是没有了？我把ttl信息帖上来，希望大家可以帮我看看！】Digital core power voltage set to 1.05V
Decompressing...done


CFE version 7.14.131.47 (r629548) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Fri Mar 10 11:38:37 CST 2017 (jenkins@SOHO-OPWRT)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
DDR Clock: 400 MHz
Warning: invalid DDR setting of 0 MHz ignored. DDR frequency will be set to 400 MHz.
Warning: invalid CPU setting of 0 MHz ignored. armclock frequency will be set to 800 MHz.
CPU type 0x0: 800MHz
Tot mem: 524288 KBytes

CFE mem:    0x00F00000 - 0x017CB47C (9221244)
Data:       0x00F638DC - 0x00F63E64 (1416)
BSS:        0x00F63E70 - 0x00FC947C (415244)
Heap:       0x00FC947C - 0x017C947C (8388608)
Stack:      0x017C947C - 0x017CB47C (8192)
Text:       0x00F00000 - 0x00F57A40 (358976)

Loader:raw Filesys:raw Dev:nflash0.os File: Optionsnull)
Loading: .... 4260192 bytes read
Entry at 0x00008000
Starting program at 0x00008000
[    2.280000] console [ttyS0] enabled, bootconsole disabled
[    2.290000] serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
[    2.300000] brd: module loaded
[    2.300000] loop: module loaded
[    2.310000] pflash: found no supported devices
[    2.310000] bcmsflash: found no supported devices
[    2.870000] Boot partition size = 524288(0x80000)
[    2.870000] lookup_nflash_rootfs_offset: offset = 0x400000
[    2.880000] nflash: squash filesystem with lzma found at block 45
[    2.890000] Creating 5 MTD partitions on "nflash":
[    2.890000] 0x000000000000-0x000000080000 : "boot"
[    2.900000] 0x000000080000-0x000000180000 : "nvram"
[    2.900000] 0x000000180000-0x000000400000 : "phicomm"
[    2.910000] 0x000000400000-0x000002600000 : "linux"
[    2.910000] 0x0000005b1bd0-0x000002600000 : "rootfs"
[    2.920000] PPP generic driver version 2.4.2
[    2.920000] Mirror/redirect action on
[    2.930000] u32 classifier
[    2.930000]     Actions configured
[    2.930000] Netfilter messages via NETLINK v0.30.
[    2.940000] nf_conntrack version 0.5.0 (8050 buckets, 32200 max)
[    2.950000] ctnetlink v0.93: registering with nfnetlink.
[    2.950000] xt_time: kernel timezone is -0000
[    2.960000] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.960000] TCP cubic registered
[    2.970000] NET: Registered protocol family 10
[    2.970000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    2.980000] NET: Registered protocol family 17
[    2.980000] L2TP core driver, V2.0
[    2.980000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[    2.990000] All bugs added by David S. Miller <davem@redhat.com>
[    3.000000] Registering the dns_resolver key type
[    3.020000] Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
[    3.030000] NAND device: Manufacturer ID: 0xc2, Chip ID: 0xf1 (Unknown NAND 128MiB 3,3V 8-bit)
[    3.040000] Spare area=64 eccbytes 28, ecc bytes located at:
[    3.040000]  9 10 11 12 13 14 15 25 26 27 28 29 30 31 41 42 43 44 45 46 47 57 58 59 60 61 62 63
[    3.050000] Available 35 bytes at (off,len):
[    3.050000] (1,8) (16,9) (32,9) (48,9) (0,0) (0,0) (0,0) (0,0)
[    3.060000] Scanning device for bad blocks
[    3.340000] Options: NO_AUTOINCR,NO_READRDY,
[    3.340000] Creating 1 MTD partitions on "brcmnand":
[    3.350000] 0x000002600000-0x000008000000 : "brcmnand"
[    3.360000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    3.380000] devtmpfs: mounted
[    3.380000] Freeing init memory: 224K
## mknod /dev/null: File exists
## mknod /dev/console: File exists
1: set_action 0


Hit ENTER for console...

Firmware version: 3.0.0.4.380.69_1
[1 preinit:init_nvram +8] init_nvram for model(49)
num_of_mssid_support(0x0089): [mssid] support [3] mssid
MAC: (null)
WL1MAC: (null)
WL2MAC: (null)


==>>gmac3_override_nvram

[    8.570000] ctf: module license 'Proprietary' taints kernel.
[    8.570000] Disabling lock debugging due to kernel taint
[    8.690000] et_module_init: passivemode set to 0x0
[    8.700000] et_module_init: txworkq set to 0x0
[    8.710000] et_module_init: et_txq_thresh set to 0xce4
[    8.710000] et_module_init: et_rxlazy_timeout set to 0x3e8
[    8.720000] et_module_init: et_rxlazy_framecnt set to 0x20
[    8.720000] et_module_init: et_rxlazy_dyn_thresh set to 0
[    8.790000] fwd0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.131.56 (r641653)
[    8.850000] fwd1: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.131.56 (r641653)
[    8.940000] fwd2: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.131.56 (r641653)
illegal, cannot enable LACP
hotplug net INTERFACE=fwd0 ACTION=add
hotplug net INTERFACE=fwd2 ACTION=add
hotplug net INTERFACE=fwd1 ACTION=add
hotplug net INTERFACE=fwd0 ACTION=add
hotplug net INTERFACE=fwd2 ACTION=add
hotplug net INTERFACE=fwd1 ACTION=add
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> init_wl country power -------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> load_wl [ dpsta dhd ] -------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> load_wl [ dpsta ] -------------------------------------
hotplug net INTERFACE=dpsta ACTION=add
hotplug net INTERFACE=dpsta ACTION=add
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> load dhd/wl [ dhd ]-[ instance_base=0 dhd_msg_level=0 ] -------------------------------------
[   11.030000] PCI_PROBE:  bus 1, slot 0,vendor 14E4, device 4365(good PCI location)
[   11.150000] PCI: Enabling device 0001:01:00.0 (0140 -> 0142)
[   11.270000] dhd_attach(): thread:dhd_watchdog_thread:193 started
[   11.850000] Dongle Host Driver, version 1.363.45.58013 (r651509)
[   11.850000] Compiled in drivers/net/wireless/bcmdhd on Jun 15 2017 at 08:42:46
[   11.880000] Register interface [eth0]  MAC: 00:90:4c:1b:00:01
[   11.880000]
hotplug net INTERFACE=eth0 ACTION=add
[   12.010000] PCI_PROBE:  bus 1, slot 0,vendor 14E4, device 4365(good PCI location)
hotplug net INTERFACE=eth0 ACTION=add
[   12.120000] PCI: Enabling device 0002:01:00.0 (0140 -> 0142)
[   12.240000] dhd_attach(): thread:dhd_watchdog_thread:199 started
[   12.820000] Dongle Host Driver, version 1.363.45.58013 (r651509)
[   12.820000] Compiled in drivers/net/wireless/bcmdhd on Jun 15 2017 at 08:42:46
[   12.830000] Register interface [eth1]  MAC: 00:90:4c:1b:00:01
[   12.830000]
hotplug net INTERFACE=eth1 ACTION=add
hotplug net INTERFACE=eth1 ACTION=add
1: check_action 0
start yaffs2: 5, 94371840
/ # start_logger:
update_lan_state(lan_, 0, 0)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>start_lan init_wl_compact -------------------------------------
generate_wl_para(0x0aab): unit 0 subunit -1
num_of_mssid_support(0x0089): [mssid] support [3] mssid
killall_tk: waiting name=envrams n=9
killall_tk: waiting name=envrams n=8
killall_tk: waiting name=envrams n=7
killall_tk: waiting name=envrams n=6
killall_tk: waiting name=envrams n=5
killall_tk: waiting name=envrams n=4
killall_tk: waiting name=envrams n=3
killall_tk: waiting name=envrams n=2
killall_tk: waiting name=envrams n=1
killall_tk: waiting name=envrams n=0
killall_tk: SIGKILL name=envrams n=9
generate_wl_para(0x0dbe): bw: 0
generate_wl_para(0x0dc0): chanspec: 0
generate_wl_para(0x0dc1): bw_cap: 3
generate_wl_para(0x0dc7): obss_coex: 1
wlconf_pre(0x0e66): set vhtmode 1
generate_wl_para(0x0aab): unit 1 subunit -1
eth2: cmd=39: No such device
num_of_mssid_support(0x0089): [mssid] support [3] mssid
killall_tk: waiting name=envrams n=9
killall_tk: waiting name=envrams n=8
killall_tk: waiting name=envrams n=7
killall_tk: waiting name=envrams n=6
killall_tk: waiting name=envrams n=5
killall_tk: waiting name=envrams n=4
killall_tk: waiting name=envrams n=3
killall_tk: waiting name=envrams n=2
killall_tk: waiting name=envrams n=1
killall_tk: waiting name=envrams n=0
killall_tk: SIGKILL name=envrams n=9
killall_tk: waiting name=envrams n=9
killall_tk: waiting name=envrams n=8
killall_tk: waiting name=envrams n=7
killall_tk: waiting name=envrams n=6
killall_tk: waiting name=envrams n=5
killall_tk: waiting name=envrams n=4
killall_tk: waiting name=envrams n=3
killall_tk: waiting name=envrams n=2
killall_tk: waiting name=envrams n=1
killall_tk: waiting name=envrams n=0
killall_tk: SIGKILL name=envrams n=9
generate_wl_para(0x0dbe): bw: 0
generate_wl_para(0x0dc0): chanspec: 0
generate_wl_para(0x0dc1): bw_cap: 7
generate_wl_para(0x0dc7): obss_coex: 0
wlconf_pre(0x0e66): set vhtmode 1
_ifconfig: name=fwd0 flags=0000  addr=(null) netmask=(null)
_ifconfig: name=fwd0 flags=1343 IFUP addr=(null) netmask=(null)
_ifconfig: name=fwd1 flags=0000  addr=(null) netmask=(null)
_ifconfig: name=fwd1 flags=1343 IFUP addr=(null) netmask=(null)
start_lan: setting up the bridge br0
hotplug net INTERFACE=br0 ACTION=add
hotplug net INTERFACE=br0 ACTION=add
vlan1: cmd=14: No such device
_ifconfig: name=vlan1 flags=1243 IFUP addr=(null) netmask=(null)
vlan1: No such device
_ifconfig: name=eth1 flags=1243 IFUP addr=(null) netmask=(null)
start_lan: setting MAC of br0 bridge to 00:90:4C:1B:00:01
generate_wl_para(0x0aab): unit 1 subunit -1
num_of_mssid_support(0x0089): [mssid] support [3] mssid
killall_tk: waiting name=envrams n=9
killall_tk: waiting name=envrams n=8
killall_tk: waiting name=envrams n=7
killall_tk: waiting name=envrams n=6
killall_tk: waiting name=envrams n=5
killall_tk: waiting name=envrams n=4
killall_tk: waiting name=envrams n=3
killall_tk: waiting name=envrams n=2
killall_tk: waiting name=envrams n=1
killall_tk: waiting name=envrams n=0
killall_tk: SIGKILL name=envrams n=9
killall_tk: waiting name=envrams n=9
killall_tk: waiting name=envrams n=8
killall_tk: waiting name=envrams n=7
killall_tk: waiting name=envrams n=6
killall_tk: waiting name=envrams n=5
killall_tk: waiting name=envrams n=4
killall_tk: waiting name=envrams n=3
killall_tk: waiting name=envrams n=2
killall_tk: waiting name=envrams n=1
killall_tk: waiting name=envrams n=0
killall_tk: SIGKILL name=envrams n=9
generate_wl_para(0x0dbe): bw: 0
generate_wl_para(0x0dc0): chanspec: 0
generate_wl_para(0x0dc1): bw_cap: 7
generate_wl_para(0x0dc7): obss_coex: 0
generate_wl_para(0x0aab): unit 1 subunit 1
generate_wl_para(0x0aab): unit 1 subunit 2
generate_wl_para(0x0aab): unit 1 subunit 3
killall_tk: waiting name=envrams n=9
killall_tk: waiting name=envrams n=8
killall_tk: waiting name=envrams n=7
killall_tk: waiting name=envrams n=6
killall_tk: waiting name=envrams n=5
killall_tk: waiting name=envrams n=4
killall_tk: waiting name=envrams n=3
killall_tk: waiting name=envrams n=2
killall_tk: waiting name=envrams n=1
killall_tk: waiting name=envrams n=0
killall_tk: SIGKILL name=envrams n=9

eth2: cmd=14: No such device
_ifconfig: name=eth2 flags=1243 IFUP addr=(null) netmask=(null)
eth2: No such device
_ifconfig: name=br0 flags=1243 IFUP addr=192.168.2.1 netmask=255.255.255.0
_ifconfig: name=lo flags=1043 IFUP addr=127.0.0.1 netmask=255.0.0.0
route_manip: cmd=ADD name=lo addr=127.0.0.0 netmask=255.0.0.0 gateway=0.0.0.0 metric=0
update_lan_state(lan_, 2, 0)
nat_rule: stop_nat_rules 1.
eth2: WLC_GET_VAR(chanspecs): No such device
failed to get valid chanspec list
start_lan 1944
# wanduck: Got LAN(-1) information:
et ioctl SIOCGETCROBORD failed!

# Enable direct rule
et ioctl SIOCGETCROBORD failed!
acsd: scan in progress .....
acsd: selected channel spec(done): 0xe09b
acsd: selected channel specpre-adj) 0xe09b (149/80)
acsd: Adjusted channel spec: 0xe09b (149/80)
acsd: selected DFS-exit channel spec: 0xe09b (149/80)
acsd: selected channel spec(done): 0xe09b
acsd: selected channel specpre-adj) 0xe09b (149/80)
acsd: Adjusted channel spec: 0xe09b (149/80)
acsd: selected channel specadj) 0xe09b (149/80)
[1 preinit:start_dnsmasq +25] begin
[1 preinit:stop_dnsmasq +25] begin
[1 preinit:stop_dnsmasq +25] end
[1 preinit:start_dnsmasq +25] end
start_lan_port(0) 1
decomp: fname=/var/lib/misc/rstats-speed.gz
TZ watchdog
decomp: gzip -dc /var/lib/misc/rstats-speed.gz > /var/tmp/rstats-uncomp != 0
load: speed_count = 0
load: read source= save_path=
load_history: fname=/var/lib/misc/rstats-history.gz
decomp: fname=/var/lib/misc/rstats-history.gz
decomp: gzip -dc /var/lib/misc/rstats-history.gz > /var/tmp/rstats-uncomp != 0
decomp: fname=/var/lib/misc/rstats-history.gz
decomp: gzip -dc /var/lib/misc/rstats-history.gz > /var/tmp/rstats-uncomp != 0
load_history: load failed
illegal, cannot enable DualWAN
vlan1: cmd=14: No such device
disk_monitor: starting...
disk_monitor: day=1, week=6, time=0:0.
disk_monitor: decide if scan the target...
disk_monitor: 0: wait_second=86400...
disk_monitor: 1: wait_second=86400...
disk_monitor: wait_second=86400...
disk_monitor: Pause...

[bwdpi check] starting...
eth2: cmd=14: No such device
[   25.960000] === p p t p init ===
start_wan: start_wan_if(0)!
[1 preinit:start_wan_if +26] unit=0.
update_wan_state(wan0_, 0, 0)
convert_wan_nvram(wan0_)
_ifconfig: name=eth0 flags=0000  addr=(null) netmask=(null)
** wan_ifname: eth0 is NOT UP
_ifconfig: name=eth0 flags=1043 IFUP addr=(null) netmask=(null)
update_wan_state(wan0_, 1, 0)
start_wan_if(0x077f): ifup:eth0
_ifconfig: name=eth0 flags=1043 IFUP addr=(null) netmask=(null)
start_wan_if(0x0795): start auth:0
start_auth:: done
start_wan_if(0x079e): start udhcpc:eth0, 0
start_wan_if(): End.
udhcpc_wan:: deconfig
_ifconfig: name=eth0 flags=1043 IFUP addr=0.0.0.0 netmask=(null)
wan_down(eth0)
wan_down(eth0): .
stop_auth:: done
route_manip: cmd=DEL name=eth0 addr=0.0.0.0 netmask=0.0.0.0 gateway=(null) metric=0
update_wan_state(wan0_, 3, 0)
update_wan_state(wan0_, 4, 3)
udhcpc:: deconfig done
killall_tk: waiting name=envrams n=9
killall_tk: waiting name=envrams n=8
killall_tk: waiting name=envrams n=7
killall_tk: waiting name=envrams n=6
killall_tk: waiting name=envrams n=5
killall_tk: waiting name=envrams n=4
killall_tk: waiting name=envrams n=3
killall_tk: waiting name=envrams n=2
[579 watchdog:btn_check +28] button RESET pressed
killall_tk: waiting name=envrams n=1
[579 watchdog:btn_check +28] button RESET pressed
killall_tk: waiting name=envrams n=0
[579 watchdog:btn_check +28] button RESET pressed
killall_tk: SIGKILL name=envrams n=9
[579 watchdog:btn_check +28] button RESET pressed
[579 watchdog:btn_check +28] button RESET pressed
[579 watchdog:btn_check +28] button RESET pressed
[579 watchdog:btn_check +28] button RESET pressed
[579 watchdog:btn_check +28] button RESET pressed
[579 watchdog:btn_check +28] button RESET pressed
et ioctl SIOCGETCROBORD failed!
[579 watchdog:btn_check +28] button RESET pressed
[579 watchdog:btn_check +29] button RESET pressed
[579 watchdog:btn_check +29] button RESET pressed
[579 watchdog:btn_check +29] button RESET pressed
[579 watchdog:btn_check +29] button RESET pressed
[579 watchdog:btn_check +29] button RESET pressed
[579 watchdog:btn_check +29] button RESET pressed
killall_tk: waiting name=envrams n=9
[579 watchdog:btn_check +29] button RESET pressed
killall_tk: waiting name=envrams n=8
[579 watchdog:btn_check +29] button RESET pressed
killall_tk: waiting name=envrams n=7
[579 watchdog:btn_check +29] button RESET pressed
killall_tk: waiting name=envrams n=6
[579 watchdog:btn_check +29] button RESET pressed
killall_tk: waiting name=envrams n=5
[579 watchdog:btn_check +30] button RESET pressed
killall_tk: waiting name=envrams n=4
[579 watchdog:btn_check +30] button RESET pressed
You can release RESET button now!
killall_tk: waiting name=envrams n=3
[579 watchdog:btn_check +30] button RESET pressed
You can release RESET button now!
killall_tk: waiting name=envrams n=2
[579 watchdog:btn_check +30] button RESET pressed
You can release RESET button now!
killall_tk: waiting name=envrams n=1
[579 watchdog:btn_check +30] button RESET pressed
You can release RESET button now!
killall_tk: waiting name=envrams n=0
[579 watchdog:btn_check +30] button RESET pressed
You can release RESET button now!
killall_tk: SIGKILL name=envrams n=9
[579 watchdog:btn_check +30] button RESET pressed
You can release RESET button now!
[579 watchdog:btn_check +30] button RESET pressed
You can release RESET button now!
[579 watchdog:btn_check +30] button RESET pressed
You can release RESET button now!
killall_tk: waiting name=envrams n=9
[579 watchdog:btn_check +30] button RESET pressed
You can release RESET button now!
killall_tk: waiting name=envrams n=8
[579 watchdog:btn_check +31] button RESET pressed
You can release RESET button now!
killall_tk: waiting name=envrams n=7
[579 watchdog:btn_check +31] button RESET pressed
You can release RESET button now!
killall_tk: waiting name=envrams n=6
[579 watchdog:btn_check +31] button RESET pressed
You can release RESET button now!
killall_tk: waiting name=envrams n=5
[579 watchdog:btn_check +31] button RESET pressed
You can release RESET button now!
killall_tk: waiting name=envrams n=4
[579 watchdog:btn_check +31] button RESET pressed
You can release RESET button now!

fengzhe***

在线等，救命啊！

siyo***

怎么提示reset按钮被按住了

搞***

是混血梅林吗？我的也是这个提示，不过没影响，工作正常

fengzhe***

搞叽叽 发表于 2018-1-7 03:19
是混血梅林吗？我的也是这个提示，不过没影响，工作正常

电脑获取不到ip地址，进不了cfe，无线Wifi也是获取不到地址，请问硬件坏了没有啊！

fengzhe***

硬件坏了么有，还是系统问题啊！

fengzhe***

心累啊！折腾死了！

唯涂涂***

fengzheng081212 发表于 2018-1-7 13:41
心累啊！折腾死了！

大哥，我和你一样的情况，最后怎么弄好的啊

A2511***

唯涂涂不可辜负 发表于 2018-3-4 23:22
大哥，我和你一样的情况，最后怎么弄好的啊

你的弄好了嘛？

xpa***

中间有一行让你按回车进入命令行

liang***

是不是把无线板拆了，其实把无线板装上就好了，梅林好像有类似开机自检的东西，硬件有问题无法开机

dppll@***

进cfe本来就需要手动设置电脑IP的，cfe不带DHCP服务。

15480***

这也是这种情况，愁死我了