|
我实在是看不懂 1条都不明白
Sep 12 13:15:58 kern.info syslog: Got connection: 2051
Sep 12 13:15:58 kern.info syslog: Connecting PPPoE socket: 00:18:82:22:4d:ce 2051 ixp1 0x3ed00
Sep 12 13:15:58 kern.debug syslog: using channel 5
Sep 12 13:15:58 kern.notice syslog: Connect: ppp0 <--> ixp1
Sep 12 13:15:58 kern.warn syslog: Couldn't increase MTU to 1500.
Sep 12 13:15:58 kern.err syslog: Couldn't increase MRU to 1500
Sep 12 13:15:58 kern.info syslog: LCP is allowed to come up.
Sep 12 13:16:04 kern.warn syslog: Couldn't increase MTU to 1500.
Sep 12 13:16:04 kern.err syslog: Couldn't increase MRU to 1500
Sep 12 13:16:07 kern.info syslog: Remote message: Authentication success,Welcome!
Sep 12 13:16:07 kern.info syslog: PAP authentication success
Sep 12 13:16:07 kern.warn syslog: Local IP address changed to 119.85.87.99
Sep 12 13:18:07 kern.info syslog: No response to 3 echo-requests
Sep 12 13:18:07 kern.notice syslog: Serial link appears to be disconnected.
Sep 12 13:18:07 kern.warn syslog: Couldn't increase MTU to 1500.
Sep 12 13:18:07 kern.err syslog: Couldn't increase MRU to 1500
Sep 12 13:18:07 kern.info syslog: LCP down.
Sep 12 13:18:13 kern.notice syslog: Connection terminated.
Sep 12 13:18:13 kern.info syslog: Connect time 2.2 minutes.
Sep 12 13:18:13 kern.info syslog: Sent 10389842 bytes, received 70054791 bytes.
Sep 12 13:18:13 kern.warn syslog: Doing disconnect
Sep 12 13:18:43 kern.info syslog: Sending PADI
Sep 12 13:18:43 kern.info syslog: HOST_UNIQ successful match
Sep 12 13:18:43 kern.info syslog: HOST_UNIQ successful match
Sep 12 13:18:43 kern.info syslog: Got connection: 226c
Sep 12 13:18:43 kern.info syslog: Connecting PPPoE socket: 00:18:82:22:4d:ce 226c ixp1 0x3ed00
Sep 12 13:18:43 kern.debug syslog: using channel 6
Sep 12 13:18:43 kern.notice syslog: Connect: ppp0 <--> ixp1
Sep 12 13:18:43 kern.warn syslog: Couldn't increase MTU to 1500.
Sep 12 13:18:43 kern.err syslog: Couldn't increase MRU to 1500
Sep 12 13:18:43 kern.info syslog: LCP is allowed to come up.
Sep 12 13:18:43 kern.info syslog: Remote message: Authentication success,Welcome!
Sep 12 13:18:43 kern.info syslog: PAP authentication success
Sep 12 13:18:43 kern.warn syslog: Local IP address changed to 119.85.84.126
Sep 12 13:20:23 kern.info syslog: No response to 3 echo-requests
Sep 12 13:20:23 kern.notice syslog: Serial link appears to be disconnected.
Sep 12 13:20:23 kern.warn syslog: Couldn't increase MTU to 1500.
Sep 12 13:20:23 kern.err syslog: Couldn't increase MRU to 1500
Sep 12 13:20:23 kern.info syslog: LCP down.
Sep 12 13:20:29 kern.notice syslog: Connection terminated.
Sep 12 13:20:29 kern.info syslog: Connect time 1.7 minutes.
Sep 12 13:20:29 kern.info syslog: Sent 10523953 bytes, received 70350022 bytes.
Sep 12 13:20:29 kern.warn syslog: Doing disconnect
Sep 12 13:20:59 kern.info syslog: Sending PADI
Sep 12 13:22:01 kern.info syslog: HOST_UNIQ successful match
Sep 12 13:22:03 kern.info syslog: HOST_UNIQ successful match
Sep 12 13:22:03 kern.info syslog: Got connection: 32fd
Sep 12 13:22:03 kern.info syslog: Connecting PPPoE socket: 00:18:82:22:4d:ce 32fd ixp1 0x3ed00
Sep 12 13:22:03 kern.debug syslog: using channel 7
Sep 12 13:22:03 kern.notice syslog: Connect: ppp0 <--> ixp1
Sep 12 13:22:03 kern.warn syslog: Couldn't increase MTU to 1500.
Sep 12 13:22:03 kern.err syslog: Couldn't increase MRU to 1500
Sep 12 13:22:03 kern.info syslog: LCP is allowed to come up.
Sep 12 13:22:03 kern.info syslog: Remote message: Authentication success,Welcome!
Sep 12 13:22:03 kern.info syslog: PAP authentication success
Sep 12 13:22:03 kern.warn syslog: Local IP address changed to 119.85.80.33
Sep 12 13:25:40 kern.notice ANISDKTOOL: aniAsfLog.c: 84 Started ANISDKTOOL with Pid 2872
Sep 12 13:25:40 kern.notice ANISDKTOOL: aniAsfLog.c: 84 Started ANISDKTOOL with Pid 2878
Sep 12 13:25:41 kern.notice ANISDKTOOL: aniAsfLog.c: 84 Started ANISDKTOOL with Pid 2880
Sep 12 13:25:41 kern.notice ANISDKTOOL: aniAsfLog.c: 84 Started ANISDKTOOL with Pid 2882
Sep 12 13:25:41 kern.notice ANISDKTOOL: aniAsfLog.c: 84 Started ANISDKTOOL with Pid 2884
Sep 12 13:25:41 kern.info ANISDKTOOL: aniSdkAppsIf.c:1817 CountryCode USI
Sep 12 13:25:41 kern.notice ANISDKTOOL: aniAsfLog.c: 84 Started ANISDKTOOL with Pid 2886
Sep 12 13:25:41 kern.notice ANISDKTOOL: aniAsfLog.c: 84 Started ANISDKTOOL with Pid 2888
Sep 12 13:25:41 kern.notice ANISDKTOOL: aniAsfLog.c: 84 Started ANISDKTOOL with Pid 2890
Sep 12 13:25:41 kern.notice ANISDKTOOL: aniAsfLog.c: 84 Started ANISDKTOOL with Pid 2892
Sep 12 13:25:41 kern.notice ANISDKTOOL: aniAsfLog.c: 84 Started ANISDKTOOL with Pid 2894
Sep 12 13:25:41 kern.notice ANISDKTOOL: aniAsfLog.c: 84 Started ANISDKTOOL with Pid 2896
Sep 12 13:25:41 kern.notice ANISDKTOOL: aniAsfLog.c: 84 Started ANISDKTOOL with Pid 2898
Sep 12 13:25:41 kern.notice ANISDKTOOL: aniAsfLog.c: 84 Started ANISDKTOOL with Pid 2900
Sep 12 13:25:41 kern.notice ANISDKTOOL: aniAsfLog.c: 84 Started ANISDKTOOL with Pid 2902
Sep 12 13:25:41 kern.err WSM: aniWsmDefaults.c:551 Ignoring BandType for Radio 0
Sep 12 13:25:41 kern.err WSM: aniWsmRadMisc.c:408 Radio (0) Resetting Meas from RADMEAS_ACTIVE
Sep 12 13:25:41 kern.warn kernel: [0][12][3][1067794] RECEIVED STOP_BSS_REQ with reason code=911
Sep 12 13:25:41 kern.warn kernel: [0][12][3][1067794] Triggering RESET_REQ
Sep 12 13:25:41 kern.warn kernel: [0][10][2][1067794] nimSysResetReq: Reason Code = 0x6
Sep 12 13:25:41 kern.warn kernel: [0][19][2][1563155] ERROR : invalid AP frame to,from=1,0
Sep 12 13:25:41 kern.warn kernel: [0][19][2][1563155] Error! process MAC header failed
Sep 12 13:25:41 kern.warn kernel: [0][19][2][1563155] dphProcessTxPacket : process Tx BD failed
Sep 12 13:25:41 kern.warn kernel: [0][19][2][1563155] ERROR : invalid AP frame to,from=1,0
Sep 12 13:25:41 kern.warn kernel: [0][19][2][1563155] Error! process MAC header failed
Sep 12 13:25:41 kern.warn kernel: [0][19][2][1563155] dphProcessTxPacket : process Tx BD failed
Sep 12 13:25:41 kern.debug kernel: wns msg rcvd: type = 0x1300^Ilength = 32
Sep 12 13:25:41 kern.warn kernel: wlan0: Rcvd a eWSM_DRV_RADIO_DISABLE_REQ for radio[0]
Sep 12 13:25:41 kern.info kernel: br0: port 2(wlan0) entering disabled state
Sep 12 13:25:41 kern.warn kernel: mac_mod_exit: Cleaning MAC FW module: radio Id 0
Sep 12 13:25:42 kern.info kernel: br0: port 2(wlan0) entering disabled state
Sep 12 13:25:42 kern.info kernel: device wlan0 left promiscuous mode
Sep 12 13:25:42 kern.warn kernel: Starting MAC FW module...radioID = 0 NUM_RADIO 1 - param_addr = 0xc0f68eac
Sep 12 13:25:42 kern.warn kernel: [0][1a][3][1563246] bg = 1, nTx = 1, nRx = 2, cb=0, ap=1, mpci=0
Sep 12 13:25:42 kern.warn kernel: [0][11][3][1] Sending CFG_DNLD_REQ
Sep 12 13:25:42 kern.warn kernel: [0][11][3][1] CFG size 2752 bytes MAGIC dword is 0xdeaddead
Sep 12 13:25:42 kern.warn kernel: [0][11][3][1] CFG hdr totParams 161 intParams 120 strBufSize 648/1456
Sep 12 13:25:43 kern.err AA: aagRadioDisable: radioId 0 to disable is not yet configured!
Sep 12 13:25:43 kern.info kernel: device wlan0 entered promiscuous mode
Sep 12 13:25:43 kern.info kernel: wlan0: attempt to add interface with same source address.
Sep 12 13:25:43 kern.info kernel: br0: port 2(wlan0) entering learning state
Sep 12 13:25:43 kern.warn kernel: [0][12][3][3] Going to parse numSSID in the START_BSS_REQ, len=9
Sep 12 13:25:43 kern.debug kernel: wns msg rcvd: type = 0x1300^Ilength = 32
Sep 12 13:25:43 kern.debug kernel: wns msg rcvd: type = 0x1304^Ilength = 48
Sep 12 13:25:58 kern.info kernel: br0: port 2(wlan0) entering forwarding state
Sep 12 13:25:58 kern.info kernel: br0: topology change detected, propagating
Sep 12 13:26:16 kern.debug kernel: wns msg rcvd: type = 0x1308^Ilength = 46
Sep 12 13:29:33 kern.notice ANISDKTOOL: aniAsfLog.c: 84 Started ANISDKTOOL with Pid 3041 |
|