【求助，老大进】新入手MSS，开机经常黄灯起不来

zg_l***

一开始用160G的IDE好像没事。后来觉得小，就去电脑市场买了个Seagate 7200.12 500G的SATA2硬盘装进去。系统装好之后经常发现无法启动，黄灯不变绿，或者变绿ping不通。5次里面只有2次能成功启动。不过一旦启动之后，非常稳定，下载几天都没事。
找公司同事焊上UART看了下log，灯不变黄：
……
Using /lib/modules/2.4.20/kernel/arch/mips/brcm-boards/bcm947xx/bcmgpio.o

Using /lib/modules/2.4.20/security/sec.o

Using /lib/modules/2.4.20/kernel/drivers/se/bcm_se.o

Checking to see that USB initialization is done...

Turning on swapping...

handling MD device /dev/md/0

analyzing super-block

disk 1: /dev/null, failed

disk 2: /dev/null, failed

disk 3: /dev/null, failed

disk 4: /dev/null, failed

disk 5: /dev/null, failed

disk 6: /dev/null, failed

disk 7: /dev/null, failed

Setting up swapspace version 1, size = 511995904 bytes

handling MD device /dev/md/1

analyzing super-block

Mounting /dev/se/2 on /shares/mss-hdd.


盒子变绿之后不能ping的log：
disk 1: /dev/null, failed
disk 2: /dev/null, failed
disk 3: /dev/null, failed
disk 4: /dev/null, failed
disk 5: /dev/null, failed
disk 6: /dev/null, failed
disk 7: /dev/null, failed
Setting up swapspace version 1, size = 511995904 bytes
handling MD device /dev/md/1
analyzing super-block
Mounting /dev/se/2 on /shares/mss-hdd.
Hit enter to short-circuit regular system start-up...No SATA controller found.
Deleting user note pool_mss-hdd_unmounted.
eth0: No such process
eth1: No such device
eth0: Network is unreachable
info, udhcp client (v0.9.8) started
……
error, SIOCGIFADDR failed, is the interface up and configured?: No such device
killall: dnsmasq: no process killed
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
rc restarting CIFS.
connect: Network is unreachable
然后按电源键也不能关机

硬盘是新的，后来也拿下来扫描过，没有红黄磁道，SMART里面UDMA CRC Error Count已经到2F4了。
老大求救啊

恩山***

将硬盘拆下放台机上初始化，不要使用清0 命令；
将硬盘盒复位；
如此这般后重新安装，最后还是有故障的话，如果是我们这里购买的，发来给我们检查。

zg_l***

换回IDE硬盘，一切正常了。每次启动都能成功。dmesg也看不到任何硬盘出错信息（原先SATA即使启动成功，dmesg里面最后几行肯定是硬盘访问出错的信息）
今晚回家再按老大的方法试试看SATA，还不行我也折腾不动了。猜测是SATA转接口不稳定或者兼容性不好造成的。
是在你们这里买的，如果发回来查的话，SATA硬盘要一并发过来不？

恩山***

要的，一并发来

zg_l***

4# 恩山无线


算了，折腾不动了，taobao又买了一个IDE来用，终于稳定了。
恩老大，那个SATA转接口可以退掉么？