找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
查看: 3344|回复: 5

[k3] TTL可以看见ip和mac地址,没见到进不去CFE>

[复制链接]
发表于 2018-4-9 23:52 | 显示全部楼层 |阅读模式
在lostloger的K3梅林固件内系统升级直接刷了固件K3_V21.5.37.246_tb.bin进不去CFE了
TTL进去是这样的,前面的省略了,后面的和好多帖子的情况不一样,是不是没救了
Decompressing...done


CFE version 7.14.131.47 (r629548) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Wed Aug  2 14:01:07 CST 2017 (jenkins@SOHO-OPWRT)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
DDR Clock: 800 MHz
Info: DDR frequency set from clkfreq=1400,*800*
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.131.47 (r629548)
CPU type 0x0: 1400MHz
Tot mem: 524288 KBytes

CFE mem:    0x00F00000 - 0x017D1E38 (9248312)
Data:       0x00F6A210 - 0x00F6A7DC (1484)
BSS:        0x00F6A7E8 - 0x00FCFE38 (415312)
Heap:       0x00FCFE38 - 0x017CFE38 (8388608)
Stack:      0x017CFE38 - 0x017D1E38 (8192)
Text:       0x00F00000 - 0x00F5DE30 (384560)

Device eth0:  hwaddr 68-DB-54-43-DC-A3, ipaddr 192.168.2.1, mask 255.255.255.0
        gateway not set, nameserver not set
Loader:raw Filesys:raw Dev:nflash0.os File: Optionsnull)
Loading: ..... 5280704 bytes read
Entry at 0x00008000
Closing network.
Starting program at 0x00008000
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
brd: module loaded
loop: module loaded
pflash: found no supported devices
bcmsflash: found no supported devices
Boot partition size = 524288(0x80000)
lookup_nflash_rootfs_offset: offset = 0x400000
nflash: squash filesystem with lzma found at block 48
Creating 8 MTD partitions on "nflash":
0x000000000000-0x000000080000 : "boot"
0x000000080000-0x000000180000 : "nvram"
0x000000180000-0x000000280000 : "nvram_back"
0x000000280000-0x0000002c0000 : "res_info"
0x000000300000-0x000000320000 : "pro_info"
0x000000380000-0x0000003a0000 : "dev_info"
0x000000400000-0x000003000000 : "linux"
0x00000061e258-0x000003000000 : "rootfs"
PPP generic driver version 2.4.2
NET: Registered protocol family 24
usbmon: debugfs is not available
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
u32 classifier
    Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8035 buckets, 32140 max)
ctnetlink v0.93: registering with nfnetlink.
xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
init_module:price_compare!
creat nlsock ok!
Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
NAND device: Manufacturer ID: 0xc2, Chip ID: 0xf1 (Unknown NAND 128MiB 3,3V 8-bit)
Spare area=64 eccbytes 28, ecc bytes located at:
9 10 11 12 13 14 15 25 26 27 28 29 30 31 41 42 43 44 45 46 47 57 58 59 60 61 62 63
Available 35 bytes at (off,len):
(1,8) (16,9) (32,9) (48,9) (0,0) (0,0) (0,0) (0,0)
Scanning device for bad blocks
Options: NO_AUTOINCR,NO_READRDY,
Creating 1 MTD partitions on "brcmnand":
0x000003000000-0x000008000000 : "brcmnand"
VFS: Mounted root (squashfs filesystem) readonly on device 31:7.
devtmpfs: mounted
Freeing init memory: 236K
yaffs: dev is 32505864 name is "mtdblock8" rw
yaffs: passed flags ""
yaffs: yaffs: Attempting MTD mount of 31.8,"mtdblock8"
yaffs: checking block 0 bad
yaffs: yaffs_read_super: is_checkpointed 1
/tmp/media/nand/config.tgz: No such file or directory
[usb_test]:usb_stat file init successful!
/sbin/hotplug2: No such file or directory
insmod: ipv6.ko: no module by that name found

Done insmod insmod: bcm57xx.ko: no module by that name found
et
Done insmod bcm57xx
Done insmod dpsta
Done insmod dhd
Done insmod hotplug detected product:  1d6b/2/206
hotplug detected product:  1d6b/2/206
hotplug detected action:  add
hotplug detected action:  add
hotplug detected product:  1d6b/1/206
hotplug detected action:  add
hotplug detected product:  1d6b/1/206
hotplug detected action:  add
GMAC3 not supported...
wl WARNING: console log level set to 1
dhcp6s: No such file or directory
[Jan 01 08:00:00] radvd: ioctl(SIOCGIFADDR) failed for vlan2: Cannot assign requested address
[Jan 01 08:00:00] radvd: interface vlan2 has no IPv4 addresses, disabling 6to4 prefix
[Jan 01 08:00:00] radvd: interface vlan2 is not UP
[Jan 01 08:00:00] radvd: interface vlan2 does not exist
[Jan 01 08:00:00] radvd: error parsing or activating the config file: /tmp/radvd.conf
creatednsmanqconf 502 ip = 192.168.2.1
info, udhcp server (v0.9.8) started
killall: hspotap: no process killed
BSD 1 bsd_info_init(1328): Err: ifnams[eth1] get bssid failure
BSD 1 bsd_info_init(1328): Err: ifnams[eth2] get bssid failure
BSD Aborting...
killall: dhd_monitor: no process killed
ACSD >>main(689): No interface specified, exiting...killall: smbd: no process killed
start_samba in
smbini_init 1
smbini_init 2
builddefaultini ret = 0
smbini_init 1
smbini_init 2
start_uhmi
wlconf wan_ifname = vlan2
info, udhcp client (v0.9.8) started
vlan2 dhcp
vlan2: No such process
custom_script f_filter >/dev/null 2>&1
send_default
the s_buf is EventCode=1
uhmi_uart.c_53:standard input is not a terminal device

uhmi init .............ok!
[806:main()]=>WAN_daemon: execute WAN_daemon.
uhmi thread creat......ok!
[DEBUG][http_start_inform_533] HTTP_INFORM : url = http://soho.cloud.phicomm.com/FX_Cloud/login/status, host=192.168.2.1, port=80, page=/FX_Cloud/login/status

[DEBUG][http_fmt_mac_290] http_fmt_mac change MAC 68B:54:43C:A3 to 68DB5443DCA3

[DEBUG][http_inform_build_587] http_data = EventCode=DeviceAddreS-S Report&roductClass=K3&SerialNumber=68DB5443DCA3&DeviceInfo.SpecVersion=1.0&DeviceInfo.HardwareVersion=A1&DeviceInfo.SoftwareVersion=V21.5.37.246&DeviceInfo.Address.IPv4.1=&DeviceInfo.Address.DNSv4.1=0.0.0.0&DeviceInfo.Address.DNSv4.2=0.0.0.0&DeviceInfo.Address.GW=0.0.0.0&DeviceInfo.UpnpIP=NULL&DeviceInfo.UpnpPort=0&DeviceInfo.HW_ID=6a5b48dcf193a5cbf89e50fc9cbbcd4b&DeviceInfo.PRODUCT_ID=85d929179ef25de820e8dff805411ac6&DeviceInfo.FW_VER=21.5.37.246&WanMac=68DB5443DCA3&UserAgreementVersion=0
[DEBUG][http_inform_build_610] http.url = /FX_Cloud/routerActiveReport/wanip

[DEBUG][http_inform_build_643] POST /FX_Cloud/routerActiveReport/wanip HTTP/1.1
Host: 192.168.2.1
Connection: keep-alive
Accept: text/html,application/xhtml+xml,application/xml,*/*
User-Agent: TR069-Client
Content-Length: 1064
Content-Type: application/x-www-form-urlencoded
Accept-Language: zh-cn
Accept-Encoding: gzip, deflate

content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
[DEBUG][http_inform_build_644] http.bufLen = 1373
[DEBUG][http_inform_state_412] state = 1, set timeout=10000

start_wl is set
                              


System boots up completely.

         
start collect process
iptables -F -t nat 1>/dev/null 2>&1
iptables -F -t mangle 1>/dev/null 2>&1
iptables -I INPUT -i br0 -p udp --sport 68 -d 255.255.255.255 --dport 67 -m state --state NEW -j ACCEPT
tc qdisc del dev  root
Cannot find device "root"
tc qdisc del dev vlan2 root
RTNETLINK answers: No such file or directory
tc qdisc del dev br0 root
RTNETLINK answers: No such file or directory
iptables -t mangle -F ip_ctl
iptables: No chain/target/match by that name.
iptables -t mangle -D FORWARD -j ip_ctl 1>/dev/null 2>&1
skip_ipct down 1>/dev/null 2>&1
chpasswd: password for 'admin' changed
mcu version: 1.2.108
[DEBUG][http_msg_handler_1016] mask = 00000004, sid = 0
[DEBUG][http_inform_state_412] state = 2, set timeout=15000

[DEBUG][http_msg_handler_1033] Socket connected, start informing !
[DEBUG][http_msg_handler_1016] mask = 00000002, sid = 0
[DEBUG][http_msg_handler_1047] Receive response !
[DEBUG][http_recv_1279] buf =

[DEBUG][http_recv_1288] http.rxbuf =

[DEBUG][http_recv_1305] #####################

#####################

[DEBUG][http_recv_1308]
[DEBUG][http_inform_response_1084] Receive acs response, http.status=0
[ERROR][http_inform_response_1127] HTTP Status = 0
[DEBUG][http_inform_state_412] state = 5, set timeout=0

[ERROR][http_msg_handler_1062] INFORM Failed, prev inform state : 2
[DEBUG][http_start_inform_533] HTTP_INFORM : url = http://soho.cloud.phicomm.com/FX_Cloud/login/status, host=192.168.2.1, port=80, page=/FX_Cloud/login/status

[DEBUG][http_fmt_mac_290] http_fmt_mac change MAC 68B:54:43C:A3 to 68DB5443DCA3

[DEBUG][http_inform_build_587] http_data = EventCode=DeviceAddreS-S Report&roductClass=K3&SerialNumber=68DB5443DCA3&DeviceInfo.SpecVersion=1.0&DeviceInfo.HardwareVersion=A1&DeviceInfo.SoftwareVersion=V21.5.37.246&DeviceInfo.Address.IPv4.1=&DeviceInfo.Address.DNSv4.1=0.0.0.0&DeviceInfo.Address.DNSv4.2=0.0.0.0&DeviceInfo.Address.GW=0.0.0.0&DeviceInfo.UpnpIP=NULL&DeviceInfo.UpnpPort=0&DeviceInfo.HW_ID=6a5b48dcf193a5cbf89e50fc9cbbcd4b&DeviceInfo.PRODUCT_ID=85d929179ef25de820e8dff805411ac6&DeviceInfo.FW_VER=21.5.37.246&WanMac=68DB5443DCA3&UserAgreementVersion=0
[DEBUG][http_inform_build_610] http.url = /FX_Cloud/routerActiveReport/wanip

[DEBUG][http_inform_build_643] POST /FX_Cloud/routerActiveReport/wanip HTTP/1.1
Host: 192.168.2.1
Connection: keep-alive
Accept: text/html,application/xhtml+xml,application/xml,*/*
User-Agent: TR069-Client
Content-Length: 1064
Content-Type: application/x-www-form-urlencoded
Accept-Language: zh-cn
Accept-Encoding: gzip, deflate

content=DF0C2647B3729A3D08C77A845ADF447F6D0E5F8D94B081BD2C4FED91D082162F58B2DDAA280B1AF9A647EC4A30E75FAD0BB18EDF70B5752F0E4B18E96E6A57A61432E02DFB04A855190958E05FC98C1E764036438D9A807617D2E3C6E66C8466F125839CDC19725C3B3CFF77A51222BAA01D34AFEC97D0322CF17B7FB475E0B5D9756839BE10866326185726EF98938A7D926034AF85B4C93B609FF4502DC6CEB5624B87888F17D74290DFC760ED5E70E514782926870C4FB83F6B09E9C106FE22F6720CC83188B8710F74080DD8A405A5B83DE555A000E2BFA2AA37E5E506ADCBC981DC5EC2D9E9C470797DBC6EEFF879E3DFD46FA7E254A9623E01E6A119CF3C28928F59BF26261C5CD23DC22B4806FE2D139F99AA0DC392A5209C7A3D5E72DB13BAFC53D184F9451B048EC04634D53C59BA898C17F678F24DDCACE189A514325B448B506F07E08106EB2CAB5B8CC3865C883863B84DBE644FBF4203C5BDECB677E62C550CE79BA126E1BB2621ABCB543DA7F63565554A26A1A0B8F36EB2CFAA9380EEDF73965E7ABBCD6A129BD8572C29AC53D166CFD5AF1A3C88ED647393B255DC1F900D176DB29FA5E4120E1DB46BA65B859B47EA5F1EC0B27AB15D738F8DA5D747CB11F1DD1A8C997BE3B3E2916D4EDB350DCDD4B4C7389899BF8FF4DE039124641DD400EC0DD83BAA2CEDFCF16DC41C7734385DA274DA01A1B6945B3F80FD99F0267C1D2E01969B90AE031397
[DEBUG][http_inform_build_644] http.bufLen = 1373
[DEBUG][http_inform_state_412] state = 1, set timeout=10000

[929:main()]=>dhcp_daemon: wan port disconnected
kill -12 727
[DEBUG][http_msg_handler_1016] mask = 00000004, sid = 0
[DEBUG][http_inform_state_412] state = 2, set timeout=15000

[DEBUG][http_msg_handler_1033] Socket connected, start informing !
info, Entering released state
[DEBUG][http_msg_handler_1016] mask = 00000002, sid = 0
[DEBUG][http_msg_handler_1047] Receive response !
[DEBUG][http_recv_1279] buf =

[DEBUG][http_recv_1288] http.rxbuf =

[DEBUG][http_recv_1305] #####################

#####################

[DEBUG][http_recv_1308]
[DEBUG][http_inform_response_1084] Receive acs response, http.status=0
[ERROR][http_inform_response_1127] HTTP Status = 0
[DEBUG][http_inform_state_412] state = 5, set timeout=0

[ERROR][http_msg_handler_1062] INFORM Failed, prev inform state : 2
[DEBUG][http_start_inform_533] HTTP_INFORM : url = http://soho.cloud.phicomm.com/FX_Cloud/login/status, host=192.168.2.1, port=80, page=/FX_Cloud/login/status

[DEBUG][http_fmt_mac_290] http_fmt_mac change MAC 68B:54:43C:A3 to 68DB5443DCA3

[DEBUG][http_inform_build_587] http_data = EventCode=DeviceAddreS-S Report&roductClass=K3&SerialNumber=68DB5443DCA3&DeviceInfo.SpecVersion=1.0&DeviceInfo.HardwareVersion=A1&DeviceInfo.SoftwareVersion=V21.5.37.246&DeviceInfo.Address.IPv4.1=&DeviceInfo.Address.DNSv4.1=0.0.0.0&DeviceInfo.Address.DNSv4.2=0.0.0.0&DeviceInfo.Address.GW=0.0.0.0&DeviceInfo.UpnpIP=NULL&DeviceInfo.UpnpPort=0&DeviceInfo.HW_ID=6a5b48dcf193a5cbf89e50fc9cbbcd4b&DeviceInfo.PRODUCT_ID=85d929179ef25de820e8dff805411ac6&DeviceInfo.FW_VER=21.5.37.246&WanMac=68DB5443DCA3&UserAgreementVersion=0
[DEBUG][http_inform_build_610] http.url = /FX_Cloud/routerActiveReport/wanip

[DEBUG][http_inform_build_643] POST /FX_Cloud/routerActiveReport/wanip HTTP/1.1
Host: 192.168.2.1
Connection: keep-alive
Accept: text/html,application/xhtml+xml,application/xml,*/*
User-Agent: TR069-Client
Content-Length: 1064
Content-Type: application/x-www-form-urlencoded
Accept-Language: zh-cn
Accept-Encoding: gzip, deflate

content=DF0C2647B3729A3D08C77A845ADF447F6D0E5F8D94B081BD2C4FED91D082162F58B2DDAA280B1AF9A647EC4A30E75FAD0BB18EDF70B5752F0E4B18E96E6A57A61432E02DFB04A855190958E05FC98C1E764036438D9A807617D2E3C6E66C8466F125839CDC19725C3B3CFF77A51222BAA01D34AFEC97D0322CF17B7FB475E0B5D9756839BE10866326185726EF98938A7D926034AF85B4C93B609FF4502DC6CEB5624B87888F17D74290DFC760ED5E70E514782926870C4FB83F6B09E9C106FE22F6720CC83188B8710F74080DD8A405A5B83DE555A000E2BFA2AA37E5E506ADCBC981DC5EC2D9E9C470797DBC6EEFF879E3DFD46FA7E254A9623E01E6A119CF3C28928F59BF26261C5CD23DC22B4806FE2D139F99AA0DC392A5209C7A3D5E72DB13BAFC53D184F9451B048EC04634D53C59BA898C17F678F24DDCACE189A514325B448B506F07E08106EB2CAB5B8CC3865C883863B84DBE644FBF4203C5BDECB677E62C550CE79BA126E1BB2621ABCB543DA7F63565554A26A1A0B8F36EB2CFAA9380EEDF73965E7ABBCD6A129BD8572C29AC53D166CFD5AF1A3C88ED647393B255DC1F900D176DB29FA5E4120E1DB46BA65B859B47EA5F1EC0B27AB15D738F8DA5D747CB11F1DD1A8C997BE3B3E2916D4EDB350DCDD4B4C7389899BF8FF4DE039124641DD400EC0DD83BAA2CEDFCF16DC41C7734385DA274DA01A1B6945B3F80FD99F0267C1D2E01969B90AE031397
[DEBUG][http_inform_build_644] http.bufLen = 1373
[DEBUG][http_inform_state_412] state = 1, set timeout=10000

[DEBUG][http_msg_handler_1016] mask = 00000004, sid = 0
[DEBUG][http_inform_state_412] state = 2, set timeout=15000

[DEBUG][http_msg_handler_1033] Socket connected, start informing !
[DEBUG][http_msg_handler_1016] mask = 00000002, sid = 0
[DEBUG][http_msg_handler_1047] Receive response !
[DEBUG][http_recv_1279] buf =

[DEBUG][http_recv_1288] http.rxbuf =

[DEBUG][http_recv_1305] #####################

#####################

[DEBUG][http_recv_1308]
[DEBUG][http_inform_response_1084] Receive acs response, http.status=0
[ERROR][http_inform_response_1127] HTTP Status = 0
[DEBUG][http_inform_state_412] state = 5, set timeout=0

[ERROR][http_msg_handler_1062] INFORM Failed, prev inform state : 2
[DEBUG][http_start_inform_533] HTTP_INFORM : url = http://soho.cloud.phicomm.com/FX_Cloud/login/status, host=192.168.2.1, port=80, page=/FX_Cloud/login/status

[DEBUG][http_fmt_mac_290] http_fmt_mac change MAC 68B:54:43C:A3 to 68DB5443DCA3

[DEBUG][http_inform_build_587] http_data = EventCode=DeviceAddreS-S Report&roductClass=K3&SerialNumber=68DB5443DCA3&DeviceInfo.SpecVersion=1.0&DeviceInfo.HardwareVersion=A1&DeviceInfo.SoftwareVersion=V21.5.37.246&DeviceInfo.Address.IPv4.1=&DeviceInfo.Address.DNSv4.1=0.0.0.0&DeviceInfo.Address.DNSv4.2=0.0.0.0&DeviceInfo.Address.GW=0.0.0.0&DeviceInfo.UpnpIP=NULL&DeviceInfo.UpnpPort=0&DeviceInfo.HW_ID=6a5b48dcf193a5cbf89e50fc9cbbcd4b&DeviceInfo.PRODUCT_ID=85d929179ef25de820e8dff805411ac6&DeviceInfo.FW_VER=21.5.37.246&WanMac=68DB5443DCA3&UserAgreementVersion=0
[DEBUG][http_inform_build_610] http.url = /FX_Cloud/routerActiveReport/wanip

[DEBUG][http_inform_build_643] POST /FX_Cloud/routerActiveReport/wanip HTTP/1.1
Host: 192.168.2.1
Connection: keep-alive
Accept: text/html,application/xhtml+xml,application/xml,*/*
User-Agent: TR069-Client
Content-Length: 1064
Content-Type: application/x-www-form-urlencoded
Accept-Language: zh-cn
Accept-Encoding: gzip, deflate

content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
[DEBUG][http_inform_build_644] http.bufLen = 1373
[DEBUG][http_inform_state_412] state = 1, set timeout=10000

[DEBUG][http_msg_handler_1016] mask = 00000004, sid = 0
[DEBUG][http_inform_state_412] state = 2, set timeout=15000

[DEBUG][http_msg_handler_1033] Socket connected, start informing !
[DEBUG][http_msg_handler_1016] mask = 00000002, sid = 0
[DEBUG][http_msg_handler_1047] Receive response !
[DEBUG][http_recv_1279] buf =

[DEBUG][http_recv_1288] http.rxbuf =

[DEBUG][http_recv_1305] #####################

#####################

[DEBUG][http_recv_1308]
[DEBUG][http_inform_response_1084] Receive acs response, http.status=0
[ERROR][http_inform_response_1127] HTTP Status = 0
[DEBUG][http_inform_state_412] state = 5, set timeout=0

[ERROR][http_msg_handler_1062] INFORM Failed, prev inform state : 2
 楼主| 发表于 2018-4-9 23:58 | 显示全部楼层
^C^C^H^H^H^H^H^H^H^H^H^H^H^H^H^H^H^H^H
/ #
/ # help
/bin/sh: help: not found
/ # help
/bin/sh: help: not found
/ # [DEBUG][http_recv_1308]
/bin/sh: [DEBUG][http_recv_1308]: not found
/ # [DEBUG][http_inform_response_1084] Receive acs response, http.status=0
/bin/sh: [DEBUG][http_inform_response_1084]: not found
/ # [ERROR][http_inform_response_1127] HTTP Status = 0
/bin/sh: [ERROR][http_inform_response_1127]: not found
/ # [DEBUG][http_inform_state_412] state = 5, set timeout=0
/bin/sh: [DEBUG][http_inform_state_412]: not found
/ #
/ # [ERROR][http_msg_handler_1062] INFORM Failed, prev inform state : 2
/bin/sh: [ERROR][http_msg_handler_1062]: not found
/ # ^C^C^H^H^H^H^H^H^H^H^H^H^H^H^H^H^H^H^H
/bin/sh: ^C^C^H^H^H^H^H^H^H^H^H^H^H^H^H^H^H^H^H: not found
/ # / #
/bin/sh: /: Permission denied
/ # / # help
/bin/sh: /: Permission denied
/ # /bin/sh: help: not found
/bin/sh: /bin/sh:: not found
/ # / # help
/bin/sh: /: Permission denied
/ # /bin/sh: help: not found
/bin/sh: /bin/sh:: not found
/ # / # sion denied
/bin/sh: /: Permission denied
/ # / # /bin/sh: help: not found
/bin/sh: /: Permission denied
/ # /bin/sh: /bin/sh:: not found
/bin/sh: /bin/sh:: not found
/ # / # / # sion denied
/bin/sh: /: Permission denied
/ # / # /bin/sh: help: not found
/bin/sh: /: Permission denied
/ # /bin/sh: /bin/sh:: not found
/bin/sh: /bin/sh:: not found
回复 支持 反对

使用道具 举报

发表于 2018-4-10 00:00 | 显示全部楼层
启动按ctrl+c

点评

mok
这是取消的意思,没用的  详情 回复 发表于 2018-4-10 10:41
回复 支持 反对

使用道具 举报

 楼主| 发表于 2018-4-10 10:41 | 显示全部楼层

这是取消的意思,没用的
回复 支持 反对

使用道具 举报

发表于 2018-4-10 15:41 | 显示全部楼层
关机 按住reset不放,开电源
回复 支持 反对

使用道具 举报

 楼主| 发表于 2018-4-30 10:28 | 显示全部楼层
我的K3好了,难道没坏?我确实在-------在lostloger的K3梅林固件内系统升级直接刷了固件K3_V21.5.37.246_tb.bin,一开始是不行的,难道折腾久了就好了?现在固件显示确实是官方-root版了
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

欢迎大家光临恩山无线论坛上一条 /1 下一条

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-6-15 06:03

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com

快速回复 返回顶部 返回列表