刷了C大的固件，LOG日志里每天有很多报错，请问你们有遇到吗？

huilvse

Jun  2 07:08:58 kernel: ERROR!!! MlmeEnqueueForRecv(): un-recongnized mgmt->subtype=4, STA-00:00:00:00:00:00
Jun  2 16:41:38 kernel: Replay Counter Different in group msg 2 of 2-way handshake!
Jun  2 20:41:41 kernel: Replay Counter Different in group msg 2 of 2-way handshake!
Jun  2 21:41:45 kernel: Replay Counter Different in group msg 2 of 2-way handshake!
Jun  2 22:34:57 NTP Client: Synchronizing time to 2001:470:0:50::2.
Jun  2 23:41:44 kernel: Replay Counter Different in group msg 2 of 2-way handshake!
Jun  3 00:41:48 kernel: Replay Counter Different in group msg 2 of 2-way handshake!
Jun  3 01:41:46 kernel: Replay Counter Different in group msg 2 of 2-way handshake!
Jun  3 03:41:49 kernel: Replay Counter Different in group msg 2 of 2-way handshake!
Jun  3 05:41:50 kernel: Replay Counter Different in group msg 2 of 2-way handshake!
Jun  3 06:41:52 kernel: Replay Counter Different in group msg 2 of 2-way handshake!
Jun  3 07:41:53 kernel: Replay Counter Different in group msg 2 of 2-way handshake!
Jun  3 16:42:01 kernel: Replay Counter Different in group msg 2 of 2-way handshake!
Jun  3 17:42:03 kernel: Replay Counter Different in group msg 2 of 2-way handshake!
Jun  3 18:42:04 kernel: Replay Counter Different in group msg 2 of 2-way handshake!
Jun  3 22:34:57 NTP Client: Synchronizing time to ntp1.aliyun.com.
Jun  3 22:35:02 NTP Client: System time changed, offset: 4.665509s
Jun  3 22:42:12 kernel: Replay Counter Different in group msg 2 of 2-way handshake!
Jun  4 04:42:18 kernel: Replay Counter Different in group msg 2 of 2-way handshake!
Jun  4 20:42:34 kernel: Replay Counter Different in group msg 2 of 2-way handshake!
Jun  4 22:35:01 NTP Client: Synchronizing time to 2001:470:0:50::2.
Jun  4 22:51:10 kernel: sta port not secure, os should not send packets!!!

报错如上，每天都很多，有大神知道这是啥意思么？

请不要胡乱输入以及粘贴、复制等方式灌水

请尊重作者、并共同维护网站的正常阅读，否则账户将会被限制发帖、回帖，站内短信以及阅读权限等都会受到影响，谢谢。 具体限制方式：https://www.right.com.cn/forum/thread-8307840-1-1.html

Ricardo33

是C大编译的版本还是其它人编译的版本？

huya1121

我自己编译的 没有这种类型的error
Jun  4 22:46:59 adbyby: 已关闭全部8118透明代理端口。
Jun  4 22:46:59 dnsmasq[3393]: exiting on receipt of SIGTERM
Jun  4 22:46:59 dnsmasq[8981]: started, version 2.80 cachesize 1024
Jun  4 22:46:59 dnsmasq[8981]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify dumpfile
Jun  4 22:46:59 dnsmasq[8981]: warning: ignoring resolv-file flag because no-resolv is set
Jun  4 22:46:59 dnsmasq-dhcp[8981]: DHCP, IP range 10.0.0.2 -- 10.0.0.52, lease time 1d
Jun  4 22:46:59 dnsmasq-dhcp[8981]: DHCP, sockets bound exclusively to interface br0
Jun  4 22:46:59 dnsmasq[8981]: using nameserver 127.0.0.1#65353
Jun  4 22:46:59 dnsmasq[8981]: read /etc/hosts - 4 addresses
Jun  4 22:46:59 dnsmasq[8981]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jun  4 22:46:59 dnsmasq-dhcp[8981]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jun  4 22:46:59 dnsmasq[8981]: using nameserver 127.0.0.1#65353
Jun  4 22:46:59 adbyby: Adbyby已关闭。
Jun  4 22:46:59 adbyby: 正在检查规则是否需要更新!
Jun  4 22:47:00 adbyby: 没有更新的规则,本次无需更新！
Jun  4 22:47:00 adbyby: Adbyby规则更新完成
Jun  4 22:47:00 adbyby: 正在处理规则...
Jun  4 22:47:01 adbyby: anti_AD下载成功,处理中...
Jun  4 22:47:01 adbyby: 添加8118透明代理端口。
Jun  4 22:47:01 adbyby: 保存adbyby防火墙规则成功！
Jun  4 22:47:01 dnsmasq[8981]: exiting on receipt of SIGTERM
Jun  4 22:47:02 dnsmasq[9123]: started, version 2.80 cachesize 1024
Jun  4 22:47:02 dnsmasq[9123]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify dumpfile
Jun  4 22:47:02 dnsmasq[9123]: warning: ignoring resolv-file flag because no-resolv is set
Jun  4 22:47:02 dnsmasq-dhcp[9123]: DHCP, IP range 10.0.0.2 -- 10.0.0.52, lease time 1d
Jun  4 22:47:02 dnsmasq-dhcp[9123]: DHCP, sockets bound exclusively to interface br0
Jun  4 22:47:02 adbyby: Adbyby启动完成。
Jun  4 22:47:02 dnsmasq[9123]: using nameserver 127.0.0.1#65353
Jun  4 22:47:02 dnsmasq[9123]: read /etc/hosts - 4 addresses
Jun  4 22:47:02 dnsmasq[9123]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jun  4 22:47:02 dnsmasq-dhcp[9123]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jun  4 22:47:02 dnsmasq[9123]: using nameserver 127.0.0.1#65353
Jun  4 22:47:32 adbyby: 已关闭全部8118透明代理端口。
Jun  4 22:47:32 dnsmasq[9123]: exiting on receipt of SIGTERM
Jun  4 22:47:32 dnsmasq[9190]: started, version 2.80 cachesize 1024
Jun  4 22:47:32 dnsmasq[9190]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify dumpfile
Jun  4 22:47:32 dnsmasq[9190]: warning: ignoring resolv-file flag because no-resolv is set
Jun  4 22:47:32 dnsmasq-dhcp[9190]: DHCP, IP range 10.0.0.2 -- 10.0.0.52, lease time 1d
Jun  4 22:47:32 dnsmasq-dhcp[9190]: DHCP, sockets bound exclusively to interface br0
Jun  4 22:47:32 dnsmasq[9190]: using nameserver 127.0.0.1#65353
Jun  4 22:47:32 dnsmasq[9190]: read /etc/hosts - 4 addresses
Jun  4 22:47:32 dnsmasq[9190]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jun  4 22:47:32 dnsmasq-dhcp[9190]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jun  4 22:47:32 dnsmasq[9190]: using nameserver 127.0.0.1#65353
Jun  4 22:47:32 adbyby: Adbyby已关闭。
Jun  4 22:47:32 adbyby: 正在检查规则是否需要更新!
Jun  4 22:47:33 adbyby: 没有更新的规则,本次无需更新！
Jun  4 22:47:33 adbyby: Adbyby规则更新完成
Jun  4 22:47:33 adbyby: 正在处理规则...
Jun  4 22:47:34 adbyby: anti_AD下载成功,处理中...
Jun  4 22:47:34 adbyby: 添加8118透明代理端口。
Jun  4 22:47:34 adbyby: 保存adbyby防火墙规则成功！
Jun  4 22:47:34 dnsmasq[9190]: exiting on receipt of SIGTERM
Jun  4 22:47:34 dnsmasq[9332]: started, version 2.80 cachesize 1024
Jun  4 22:47:34 dnsmasq[9332]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify dumpfile
Jun  4 22:47:34 dnsmasq[9332]: warning: ignoring resolv-file flag because no-resolv is set
Jun  4 22:47:34 dnsmasq-dhcp[9332]: DHCP, IP range 10.0.0.2 -- 10.0.0.52, lease time 1d
Jun  4 22:47:34 dnsmasq-dhcp[9332]: DHCP, sockets bound exclusively to interface br0
Jun  4 22:47:34 adbyby: 设置每隔04时30分，自动更新规则！
Jun  4 22:47:34 dnsmasq[9332]: using nameserver 127.0.0.1#65353
Jun  4 22:47:34 adbyby: Adbyby启动完成。
Jun  4 22:47:34 dnsmasq[9332]: read /etc/hosts - 4 addresses
Jun  4 22:47:34 dnsmasq[9332]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jun  4 22:47:34 dnsmasq-dhcp[9332]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jun  4 22:47:34 dnsmasq[9332]: using nameserver 127.0.0.1#65353
Jun  4 23:41:06 sshd[10690]: error: kex_exchange_identification: Connection closed by remote host
Jun  4 23:41:28 sshd[10691]: Invalid user root from 116.153.32.211 port 50052
Jun  4 23:41:28 sshd[10691]: error: Could not get shadow information for NOUSER
Jun  4 23:41:28 sshd[10691]: Failed password for invalid user root from 116.153.32.211 port 50052 ssh2
Jun  4 23:41:28 sshd[10691]: Received disconnect from 116.153.32.211 port 50052:11: Normal Shutdown, Thank you for playing [preauth]
Jun  4 23:41:28 sshd[10691]: Disconnected from invalid user root 116.153.32.211 port 50052 [preauth]
Jun  4 23:41:28 sshd[10692]: Invalid user root from 116.153.32.211 port 51648
Jun  4 23:41:28 sshd[10692]: error: Could not get shadow information for NOUSER
Jun  4 23:41:28 sshd[10692]: Failed password for invalid user root from 116.153.32.211 port 51648 ssh2
Jun  4 23:41:28 sshd[10692]: Received disconnect from 116.153.32.211 port 51648:11: Normal Shutdown, Thank you for playing [preauth]
Jun  4 23:41:28 sshd[10692]: Disconnected from invalid user root 116.153.32.211 port 51648 [preauth]
Jun  5 00:00:00 adbyby: 已关闭全部8118透明代理端口。
Jun  5 00:00:00 dnsmasq[9332]: exiting on receipt of SIGTERM
Jun  5 00:00:00 dnsmasq[11221]: started, version 2.80 cachesize 1024
Jun  5 00:00:00 dnsmasq[11221]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify dumpfile
Jun  5 00:00:00 dnsmasq[11221]: warning: ignoring resolv-file flag because no-resolv is set
Jun  5 00:00:00 dnsmasq-dhcp[11221]: DHCP, IP range 10.0.0.2 -- 10.0.0.52, lease time 1d
Jun  5 00:00:00 dnsmasq-dhcp[11221]: DHCP, sockets bound exclusively to interface br0
Jun  5 00:00:00 dnsmasq[11221]: using nameserver 127.0.0.1#65353
Jun  5 00:00:00 dnsmasq[11221]: read /etc/hosts - 4 addresses
Jun  5 00:00:00 dnsmasq[11221]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jun  5 00:00:00 dnsmasq-dhcp[11221]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jun  5 00:00:00 dnsmasq[11221]: using nameserver 127.0.0.1#65353
Jun  5 00:00:00 adbyby: Adbyby已关闭。
Jun  5 00:00:00 adbyby: 正在检查规则是否需要更新!
Jun  5 00:00:01 adbyby: 没有更新的规则,本次无需更新！
Jun  5 00:00:01 adbyby: Adbyby规则更新完成
Jun  5 00:00:01 adbyby: 正在处理规则...
Jun  5 00:00:02 adbyby: anti_AD下载成功,处理中...
Jun  5 00:00:03 adbyby: 添加8118透明代理端口。
Jun  5 00:00:03 adbyby: 保存adbyby防火墙规则成功！
Jun  5 00:00:03 dnsmasq[11221]: exiting on receipt of SIGTERM
Jun  5 00:00:03 dnsmasq[11345]: started, version 2.80 cachesize 1024
Jun  5 00:00:03 dnsmasq[11345]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify dumpfile
Jun  5 00:00:03 dnsmasq[11345]: warning: ignoring resolv-file flag because no-resolv is set
Jun  5 00:00:03 dnsmasq-dhcp[11345]: DHCP, IP range 10.0.0.2 -- 10.0.0.52, lease time 1d
Jun  5 00:00:03 dnsmasq-dhcp[11345]: DHCP, sockets bound exclusively to interface br0
Jun  5 00:00:03 dnsmasq[11345]: using nameserver 127.0.0.1#65353
Jun  5 00:00:03 dnsmasq[11345]: read /etc/hosts - 4 addresses
Jun  5 00:00:03 dnsmasq[11345]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jun  5 00:00:03 dnsmasq-dhcp[11345]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jun  5 00:00:03 dnsmasq[11345]: using nameserver 127.0.0.1#65353
Jun  5 02:54:40 sshd[15357]: error: kex_exchange_identification: read: Connection reset by peer
Jun  5 02:54:42 sshd[15358]: Connection closed by 198.108.66.241 port 35284 [preauth]
Jun  5 06:13:00 sshd[19972]: error: kex_exchange_identification: client sent invalid protocol identifier "GET / HTTP/1.1"
Jun  5 06:44:56 ss-server[590]: server recv: Connection reset by peer
Jun  5 07:54:49 sshd[22510]: error: kex_exchange_identification: Connection closed by remote host
Jun  5 08:22:23 sshd[23188]: Invalid user root from 59.63.203.200 port 55440
Jun  5 08:22:23 sshd[23188]: error: Could not get shadow information for NOUSER
Jun  5 08:22:23 sshd[23188]: Failed password for invalid user root from 59.63.203.200 port 55440 ssh2
Jun  5 08:22:23 sshd[23188]: Connection closed by invalid user root 59.63.203.200 port 55440 [preauth]
Jun  5 08:22:24 sshd[23190]: Invalid user root from 59.63.203.200 port 55554
Jun  5 08:22:24 sshd[23190]: error: Could not get shadow information for NOUSER
Jun  5 08:22:24 sshd[23190]: Failed password for invalid user root from 59.63.203.200 port 55554 ssh2
Jun  5 08:22:24 sshd[23190]: Connection closed by invalid user root 59.63.203.200 port 55554 [preauth]
Jun  5 08:22:25 sshd[23192]: Invalid user root from 59.63.203.200 port 55714
Jun  5 08:22:25 sshd[23192]: error: Could not get shadow information for NOUSER
Jun  5 08:22:25 sshd[23192]: Failed password for invalid user root from 59.63.203.200 port 55714 ssh2
Jun  5 08:22:25 sshd[23192]: Connection closed by invalid user root 59.63.203.200 port 55714 [preauth]
Jun  5 10:56:49 sshd[26699]: error: kex_exchange_identification: read: Connection reset by peer
Jun  5 10:56:49 sshd[26700]: error: kex_exchange_identification: client sent invalid protocol identifier "GET / HTTP/1.1"
Jun  5 10:56:59 sshd[26701]: Connection closed by 198.108.66.212 port 41004 [preauth]
Jun  5 16:17:19 sshd[1669]: error: kex_exchange_identification: banner line contains invalid characters
Jun  5 16:43:56 sshd[2322]: error: kex_exchange_identification: banner line contains invalid characters

huilvse

Ricardo33 发表于 2020-6-5 18:31
是C大编译的版本还是其它人编译的版本？

Padavan & N56U project community & by hanwckf

huilvse

Ricardo33 发表于 2020-6-5 18:31
是C大编译的版本还是其它人编译的版本？

固件版本:        3.4.3.9-099_20200507

428255177

我也有很多报错。不知道什么原因

Kayro

一样的报错，不知道怎么回事。我看C大固件有很多issue错误，感觉会放弃这个固件的更新

丘丘9

最后那个报错是不是因为开了内网穿透？

nazca001

我自编译的也有那些个报错，应该是源码的问题。