|
记得那天早上开机 就卡开机画面 一天都没动,然后按照[webpad]大佬的 刷机方法 结果
USB未知设备 直接无法识别
然后上TTL线 https://www.right.com.cn/forum/thread-326314-1-1.html
线序 左到右 GND TX RX VCC GND
开始跑马 ctrl+C 中断 8G 优盘 固件地址 发现16G或者以上的都不能用
然后开始输入升级命令
gxm_q201_v1#usb_update bootloader bootloader.img
usb_start_count 0
(Re)start USB...
USB0: USB3.0 XHCI init start
Register 3000140 NbrPorts 3
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... init_part() 278: PART_TYPE_DOS
1 Storage Device(s) found
[fat]Filesize is 0xb8200B[0M]
[MSG]Down(store) part(bootloader) sz(0xb8200) fmt(normal)
[MSG]totalSlotNum = 0, nextWriteBackSlot 12
[fat]Filesize is 0xb8200B[0M]
[fat]0x:leftSz 200 < BPS 1000, gotSz 8200
[MSG]Burn Start...
emmc/sd response timeout, cmd13, status=0xa1ff2800
emmc/sd response timeout, cmd13, status=0x1ff2800
emmc/sd response timeout, cmd13, status=0x1ff2800
emmc/sd response timeout, cmd13, status=0x1ff2800
emmc/sd response timeout, cmd13, status=0xa1ff2800
emmc/sd response timeout, cmd13, status=0x1ff2800
amlmmc cmd <NULL> failed
store - STORE sub-system
Usage:
store store init flag
store read name addr off|partition size
read 'size' bytes starting at offset 'off'
to/from memory address 'addr', skipping bad blocks.
store write name addr off|partition size
write 'size' bytes starting at offset 'off'
to/from memory address 'addr', skipping bad blocks.
store rom_write add off size.
write uboot to the boot device
store erase boot/data:
erase the area which is uboot or data
store erase partition <partition_name>:
erase the area which partition in u-boot
store erase dtb
store erase key
store disprotect key
store rom_protect on/off
store scrub off|partition size
scrub the area from offset and size
store dtb iread/read/write addr <size>
read/write dtb, size is optional
store key read/write addr <size>
read/write key, size is optional
store mbr addr
update mbr/partition table by dtb
cmd store rom_write failed
[MSG]align bootloader sz from 0xb8200 to 0xc0000
ERR(../drivers/usb/gadget/v2_burning/v2_common/optimus_download.c)L575:Fail in optimus_storage_write, data 0x0000000007700000, wantSz 0xb8200
ERR(../drivers/usb/gadget/v2_burning/v2_common/optimus_buffer_manager.c)L242:this burn size 0 <= last left size 0, data 0x0000000007700000
ERR(../drivers/usb/gadget/v2_burning/v2_sdc_burn/optimus_sdc_update.c)L242:fail in report data ready, rcode 1
=====>Burn part bootloader in fmt normal FAILED!!<======
ERR(../drivers/usb/gadget/v2_burning/v2_usb_burn/optimus_usb_update.c)L112:Fail to burn partition (bootloader) with image file (bootloader.img) in format (normal)
gxm_q201_v1#
请问大神还有救嘛?
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有账号?立即注册
×
|