J1900在openwrt不能正常重启的BIOS选项说明

msil***

对于J1900在openwrt不能正常重启的，下面是intel官方定义项说明，分享给大家
BIOS设置选项：
Power Technology
Select Energy Efficient to support power-saving mode. Select Custom to customize system power settings. Select Max Performance to optimize system performance. Select Disabled to disable power-saving settings. The options are Disable, Energy Efficient, and Custom.
选择节能模式支持节电模式。选择“自定义”自定义系统电源设置。选择“最大性能”以优化系统性能。选择“禁用”以禁用节能设置。选项包括禁用、节能和自定义。
*If the option is set to Custom or Energy Efficient, the following items will display:
如果该选项设置为自定义或节能，将显示以下项目
Energy Performance Tuning (Available when Power Technology is set to Custom or Energy Efficient)
能源性能调整（电源技术设置为自定义或节能时可用）
Select Enable for energy-performance tuning support to enhance energy efficiency, which might compromise system performance. The options are Enable and Disable.
选择启用能源性能调优支持以提高能源效率，这可能会降低系统性能。选项为启用和禁用
Energy Performance Bias Setting (Available when Power Technology is set to Custom or Energy Efficient)
能量性能偏差设置（当功率技术设置为自定义或节能时可用）
Use this feature to select an appropriate fan setting to achieve maximum system performance (with maximum cooling) or maximum energy efficiency with maximum power saving). The fan speeds are controlled by the firmware management via IPMI 2.0. The options are Performance, Balanced Performance, Balanced Power, and Power.
使用此功能可选择适当的风扇设置，以实现最大系统性能（最大冷却）或最大节能。风扇速度由固件管理通过IPMI 2.0控制。选项包括性能、平衡性能、平衡功率和功率
Energy Efficiency Turbo (Available when Power Technology is set to Custom or Energy Efficient) Select Enable for the system to operate at turbo mode with reduced power consumption so that your machine can achieve maximum system performance with the maximum power efficiency possible. The options are Enable and Disable. *If the option is set to Custom, the following items will display:
能效涡轮（在功率技术设置为“自定义”或“节能”时可用）选择“启用”，使系统以涡轮模式运行，同时降低功耗，这样您的机器可以以最大的功率效率实现最大的系统性能。选项为启用和禁用。*如果该选项设置为“自定义”，将显示以下项目：
CPU P State Control (Available when Power Technology is set to Custom)
EIST (P-states)
EIST (Enhanced Intel SpeedStep Technology) allows the system to automatically adjust processor voltage and core frequency to reduce power consumption and heat dissipation. The options are Disable and Enable.
EIST（增强型Intel SpeedStep技术）允许系统自动调整处理器电压和核心频率，以降低功耗和散热。选项为禁用和启用。
Turbo Mode
Select Enable to use the Turbo Mode to boost system performance. The options are Enable and Disable.
选择启用以使用涡轮模式提高系统性能。选项为启用和禁用
P-state Coordination
This item is used to change the P-state (Power-Performance State) coordination type. P-state is also known as 'SpeedStep' for Intel processors. Select HW_ALL to change the P-state coordination type for hardware components only. Select SW_ALL to change the P-state coordination type for all software installed in the system. Select SW_ANY to change the P-state coordination type for a software program in the system. The options are HW_All, SW_ALL, and SW_ANY.
此项用于更改P状态（电源性能状态）协调类型。p-state也被称为英特尔处理器的“speedstep”。选择“全部硬件”更改仅硬件组件的P状态协调类型。选择sw_all更改系统中安装的所有软件的P状态协调类型。选择sw_any更改系统中软件程序的P状态协调类型。选项包括hw_all、sw_all和sw_any。
CPU C State Control (Available when Power Technology is set to Custom)
Package C State limit
CPU C状态控制（电源技术设置为自定义时可用）
C包状态限制
Use this item to set the limit on the C-State package register. The options are C0/1 state, C2 state, C6 (non-Retention) state, and C6 (Retention) state.
CPU C3 Report
使用此项设置C状态包寄存器的限制。选项包括c0/1状态、c2状态、c6（非保留）状态和c6（保留）状态。
CPU C3报告
Select Enable to allow the BIOS to report the CPU C3 State (ACPI C2) to the operatingsystem. During the CPU C3 State, the CPU clock generator is turned off. The options are Enable and Disable.
选择启用以允许BIOS向操作系统报告CPU C3状态（ACPI C2）。在CPU C3状态下，CPU时钟发生器关闭。选项为启用和禁用。
CPU C6 Report (Available when Power Technology is set to Custom)
Select Enable to allow the BIOS to report the CPU C6 state (ACPI C3) to the operating system. During the CPU C6 state, power to all cache is turned off. The options are Enable and Disable.
Enhanced Halt State (C1E)
CPU C6报告（电源技术设置为自定义时可用）

选择启用以允许BIOS向操作系统报告CPU C6状态（ACPI C3）。在CPU C6状态下，关闭所有缓存的电源。选项为启用和禁用。
增强停止状态（C1E）
Select Enabled to use Enhanced Halt-State technology, which will significantly reduce the CPU's power consumption by reducing the CPU's clock cycle and voltage during a Halt-state. The options are Disable and Enable.
选择启用以使用增强的停止状态技术，这将通过在停止状态期间降低CPU的时钟周期和电压显著降低CPU的功耗。选项为禁用和启用
CPU T State Control (Available when Power Technology is set to Custom)
ACPI (Advanced Configuration Power Interface) T-States
CPU T状态控制（电源技术设置为自定义时可用）
ACPI（高级配置电源接口）T状态
Select Enable to support CPU throttling by the operating system to reduce power consumption. The options are Enable and Disable.
选择“启用”以支持操作系统的CPU限制以降低功耗。选项为启用和禁用。

xs70***

重启的时候你op界面的代码显示啥

jjs***

所以到底应该怎么设置

寒***

我的J1900 ，爱快的虚拟机安装OP失败。。。。

YL***

所以 没看明白。。。我的J1900工控机  装openwrt有时设置候重启就卡住  不知道为什么    按照网上方法设置成安卓或者linu的引导方式 也没用