求助 刷了 CFE 之后 ping 不通 ttl 信息看不懂求助

JQZC***

CFE version 1.0.37-1.07 for BCM947XX (32bit,SP,LE)
Build Date: 2005钳 11奉  7泣 奉退泣 15:52:24 JST (root@ifedora)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena
Initializing Devices.
* cmdset: AMD Standard
* Insaner_1 = (0xc9)
* flashutl_cmd: type (0004), read_id (0090)
-> vendid (00C2), devid (22C9), devid2 (0000)
* flashutl_cmd: type (0003), read_id (0090)
-> vendid (00C2), devid (22C9), devid2 (0000)
* flashutl_cmd: type (0002), read_id (0090)
-> vendid (0019), devid (1000), devid2 (0000)
* Flash Info. -> manufacturer (FF), device (FF)
* Flash Info. -> manufacturer2 (0000), device2 (0000)
* Insaner_2 = (0xc9)
* cmdset: AMD Standard
* Insaner_1 = (0xc9)
* flashutl_cmd: type (0004), read_id (0090)
-> vendid (00C2), devid (22C9), devid2 (0000)
* flashutl_cmd: type (0003), read_id (0090)
-> vendid (00C2), devid (22C9), devid2 (0000)
* flashutl_cmd: type (0002), read_id (0090)
-> vendid (0019), devid (1000), devid2 (0000)
* Flash Info. -> manufacturer (FF), device (FF)
* Flash Info. -> manufacturer2 (0000), device2 (0000)
* Insaner_2 = (0xc9)
* cmdset: AMD Standard
* Insaner_1 = (0xc9)
* flashutl_cmd: type (0004), read_id (0090)
-> vendid (00C2), devid (22C9), devid2 (0000)
* flashutl_cmd: type (0003), read_id (0090)
-> vendid (00C2), devid (22C9), devid2 (0000)
* flashutl_cmd: type (0002), read_id (0090)
-> vendid (0019), devid (1000), devid2 (0000)
* Flash Info. -> manufacturer (FF), device (FF)
* Flash Info. -> manufacturer2 (0000), device2 (0000)
* Insaner_2 = (0xc9)
This chip isn't ADMtek ADM6996M.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.39.0
* memc_config: [00048009]
pmon_nvram_get:[sdram_init]=[0x0009]
pmon_nvram_get:[sdram_config]=[0x0062]
pmon_nvram_get:[sdram_refresh]=[0x0000]
pmon_nvram_get:[sdram_ncdl]=[0x0]
#### pmon_sdram_init is [0x0009]
#### pmon_sdram_config is [0x0062]
#### pmon_sdram_refresh is [0x0000]
#### pmon_sdram_ncdl is [0x0]
#### NVRAM warning sdram parameter is unset!!
#### sdram_init is [NULL]
#### sdram_config is [NULL]
#### sdram_refresh is [NULL]
#### sdram_ncdl is [NULL]
#### sdram parameter: reset (CFE default)