|
|
本帖最后由 dj530 于 2012-3-20 21:15 编辑
改了双闪存4M+8M，内存换了64M，4M闪存的系统一切正常，8M通电无线灯不亮，固件是不是有问题需要怎么弄？
谢谢楼下诸位热情回复！
U-Boot 1.1.4 (Apr 25 2011 - 16:03:02)
AP91 (ar7240) U-boot
DRAM:
sri
#### TAP VALUE 1 = 8, 2 = 8
64 MB
id read 0x100000ff
flash size 8388608, sector count = 128
Flash: 8 MB
Using default environment
In: serial
Out: serial
Err: serial
Net: ag7240_enet_initialize...
No valid address in Flash. Using fixed address
: cfg1 0xf cfg2 0x7014
eth0: 00:03:7f:09:0b:ad
eth0 up
No valid address in Flash. Using fixed address
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
ATHRS26: resetting s26
ATHRS26: s26 reset done
eth1 up
eth0, eth1
Autobooting in 1 seconds
## Booting image at 9f020000 ...
Uncompressing Kernel Image ... OK
Starting kernel ...
Booting AR7240(Python)...
Linux version 2.6.15--LSDK-7.3.0.300 gcc version 3.4.4 #1 Fri Sep 3 12:31:04 CST 2010
flash_size passed from bootloader = 8
CPU revision is: 00019374
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
User-defined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Built 1 zonelists
Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs init=/sbin/init mtdparts=ar7100-nor0:128k(u-boot),1024k(kernel),2816k(rootfs),64k(config),64k(art) mem=32M
Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
PID hash table entries: 256 (order: 8, 4096 bytes)
Using 200.000 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 30540k/32768k available (1373k kernel code, 2212k reserved, 294k data, 128k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
NET: Registered protocol family 16
Reset button pressed.
Returning IRQ 48
AR7240 GPIOC major 0
squashfs: version 3.3 (2007/10/31) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered
Serial: 8250/16550 driver $Revision: #1 $ 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x0 (irq = 19) is a 16550A
RAMDISK driver initialized: 1 RAM disks of 8192K size 1024 blocksize
PPP generic driver version 2.4.2
PPPoX init, max protocols:3
NET: Registered protocol family 24
pppox protocol 0 register. max:3
cmdlinepart partition parsing not available
Searching for RedBoot partition table
5 RedBoot partitions found on MTD device ar7240-nor0
Creating 5 MTD partitions on "ar7240-nor0":
0x00000000-0x00020000 : "boot"
0x00020000-0x00120000 : "kernel"
0x00120000-0x003e0000 : "rootfs"
0x003e0000-0x003f0000 : "config"
0x003f0000-0x00400000 : "art"
->Oops: flash id 0xef4017 .
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 128k freed
init started: BusyBox v1.01 (2010.09.03-04:20+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
This board use 2.6.15
ip_conntrack version 2.4 (256 buckets, 5120 max) - 244 bytes per conntrack
statistics: module license 'BSD' taints kernel.
insmod: cannot open module `/lib/modules/2.6.15/kernel/flashid.ko': No such file or directory
pppox protocol 1 register. max:3
PPPoL2TP kernel driver, V0.17. fixed many bug. drop rcv pkts and xmit pkts while no buffer, use pass time HZ/4.only drop ip pkt. no printk. xl2tpd 15 retries xmit. 08.20
PPTP driver version 0.8.3
pppox protocol 2 register. max:3
insmod: cannot open module `/lib/modules/2.6.15/kernel/harmony.ko': No such file or directory
Now flash open!
Now flash open!
sys_mode=0 mac:8106c000 ag7240_macs[0]:00000000 ag7240_macs[1]:8106c000
2
sys_mode=0 mac:81ca4000 ag7240_macs[0]:81ca4000 ag7240_macs[1]:8106c000
1
+++ pvid_bitmap initial
(none) mips #1 Fri Sep 3 12:31:04 CST 2010 (none)
(none) login: sys_mode 0 PHY4 auto-negotiation enable
Attention: PHY4 Class A setting in debug 5 register which is not described in DS
phy_setup ethUnit:0 phyUnit:4
Port 4, Neg Success
ATHRS26: resetting s26
ATHRS26: s26 reset done
sys_mode 0 PHY0 auto-negotiation enable
Attention: PHY 0 Class A setting in debug 5 register which is not described in DS
sys_mode 0 PHY1 auto-negotiation enable
Attention: PHY 1 Class A setting in debug 5 register which is not described in DS
sys_mode 0 PHY2 auto-negotiation enable
Attention: PHY 2 Class A setting in debug 5 register which is not described in DS
sys_mode 0 PHY3 auto-negotiation enable
Attention: PHY 3 Class A setting in debug 5 register which is not described in DS
++++ athrs26_igmp_setup once
vtable vid: 0x00000002, bitmap 0x00000003
vtable vid: 0x00000004, bitmap 0x00000005
vtable vid: 0x00000006, bitmap 0x00000007
vtable vid: 0x00000008, bitmap 0x00000009
vtable vid: 0x0000000a, bitmap 0x0000000b
vtable vid: 0x0000000c, bitmap 0x0000000d
vtable vid: 0x0000000e, bitmap 0x0000000f
vtable vid: 0x00000010, bitmap 0x00000011
vtable vid: 0x00000012, bitmap 0x00000013
vtable vid: 0x00000014, bitmap 0x00000015
vtable vid: 0x00000016, bitmap 0x00000017
vtable vid: 0x00000018, bitmap 0x00000019
vtable vid: 0x0000001a, bitmap 0x0000001b
vtable vid: 0x0000001c, bitmap 0x0000001d
vtable vid: 0x0000001e, bitmap 0x0000001f
vtable vid: 0x00000020, bitmap 0x00000021
++ PVID: 0x0000001a, bitmap: 0x0000001f
++ PVID: 0x0000001a, bitmap: 0x0000001f
++ PVID: 0x0000001c, bitmap: 0x0000001f
++ PVID: 0x0000001e, bitmap: 0x0000001f
++ PVID: 0x00000020, bitmap: 0x0000001f
phy_setup ethUnit:1 phyUnit:0
phy_setup ethUnit:1 phyUnit:1
phy_setup ethUnit:1 phyUnit:2
phy_setup ethUnit:1 phyUnit:3
Port 0, Neg Success
Port 1, Neg Success
Port 2, Neg Success
Port 3, Neg Success
device eth0 entered promiscuous mode
phy_setup ethUnit:1 phyUnit:0
phy_setup ethUnit:1 phyUnit:1
phy_setup ethUnit:1 phyUnit:2
phy_setup ethUnit:1 phyUnit:3
Port 0, Neg Success
Port 1, Neg Success
Port 2, Neg Success
Port 3, Neg Success
++++ phy_up is 1, fdx is 1, speed is 1
AG7240: enet unit:1 phy:3 is up...Mii 100Mbps full duplex
AG7240: enet unit 1 phy 3 mode 0x4c04
br0: port 1(eth0) entering learning state
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
ip_conntrack_rtsp v0.01 loading
ip_nat_rtsp v0.01 loading
ath_hal: 0.9.17.1 (AR5416, DEBUG, REGOPS_FUNC, WRITE_EEPROM, 11D)
wlan: 0.8.4.2 (Atheros/multi-bss)
ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
ath_pci: 0.9.4.5 (Atheros/multi-bss)
ath_dev_attach: unable to attach hardware; HAL status 7
wlan_me: Version 0.1
Copyright (c) 2008 Atheros Communications, Inc. All Rights Reserved
wlan: mac acl policy registered
+++ GE0 RX DMA ENABLE
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看，没有账号？立即注册
×
|
/1 
IP卡
狗仔卡
发表于 2012-3-18 17:00
置顶卡
沉默卡
喧嚣卡
顶贴卡
显身卡
要把art.bin刷进去才行！
