TTL按照教程救砖 但是无法中断 能有大神帮我看看吗？

skyf***

0
trigger button release!
boot from rootfs 0
  miwifi: check crash in rmem !
ubi0: attaching mtd1
ubi0: scanning is finished
ubi0: attached mtd1 (name "mtd=0", size 35 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 286, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 3/0, WL threshold: 4096, image sequence number: 1138970629
ubi0: available PEBs: 10, total reserved PEBs: 276, PEBs reserved for bad PEB handling: 20
Read 0 bytes from volume kernel to 44000000
No size specified -> Using max size (4952064)
Could not find PCI in device tree
## Loading kernel from FIT Image at 44000000 ...
   Using 'config@ac04' configuration
   Trying 'kernel-1' kernel subimage
     Description:  ARM64 OpenWrt Linux-5.15.50
     Type:         Kernel Image
     Compression:  gzip compressed
     Data Start:   0x440000e8
     Data Size:    4797006 Bytes = 4.6 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x41000000
     Entry Point:  0x41000000
     Hash algo:    crc32
     Hash value:   7e450de3
     Hash algo:    sha1
     Hash value:   5130a2717a30b6eaa3cae2ad99b964890e86185d
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 44000000 ...
   Using 'config@ac04' configuration
   Trying 'fdt-1' fdt subimage
     Description:  ARM64 OpenWrt redmi_ax6 device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x44493474
     Data Size:    42520 Bytes = 41.5 KiB
     Architecture: AArch64
     Hash algo:    crc32
     Hash value:   f3b0be10
     Hash algo:    sha1
     Hash value:   3889ea890d683ced401633c07b60c804700ef662
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Booting using the fdt blob at 0x44493474
   Uncompressing Kernel Image ... OK
   Loading Device Tree to 4a3f2000, end 4a3ff617 ... OK
Using machid 0x8010010 from environment

Starting kernel ...

Jumping to AARCH64 kernel via monitor
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.15.50 (Boos4721@Boos) (aarch64-openwrt-linux-musl-gcc (GCC11.3.0-r5190-4fabd708d By Boos4721) 11.3.0, GNU ld (GNU Binutils) 2.38) #0 SMP Tue Jun 28 05:44:20 2022
[    0.000000] Machine model: Redmi AX6
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000040000000-0x000000005fffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x0000000040ffffff]
[    0.000000]   node   0: [mem 0x0000000041000000-0x000000004a3fffff]
[    0.000000]   node   0: [mem 0x000000004a400000-0x000000004a4fffff]
[    0.000000]   node   0: [mem 0x000000004a500000-0x000000004a5fffff]
[    0.000000]   node   0: [mem 0x000000004a600000-0x000000004e8fffff]
[    0.000000]   node   0: [mem 0x000000004e900000-0x000000005fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] psci: OSI mode supported.
[    0.000000] percpu: Embedded 17 pages/cpu s30296 r8192 d31144 u69632
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129024
[    0.000000] Kernel command line: ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait uart_en=1 root=/dev/ubiblock0_1
[    0.000000] Unknown kernel command line parameters "uart_en=1", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stackff, heap allocff, heap freeff
[    0.000000] Memory: 415888K/524288K available (7488K kernel code, 894K rwdata, 2004K rodata, 1216K init, 282K bss, 108400K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479]
[    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000182] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000199] pid_max: default: 32768 minimum: 301
[    0.000350] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.000367] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.001943] rcu: Hierarchical SRCU implementation.
[    0.002114] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.002592] smp: Bringing up secondary CPUs ...
[    0.003208] Detected VIPT I-cache on CPU1
[    0.003279] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.003904] Detected VIPT I-cache on CPU2
[    0.003947] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.004528] Detected VIPT I-cache on CPU3
[    0.004567] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.004627] smp: Brought up 1 node, 4 CPUs
[    0.004654] SMP: Total of 4 processors activated.
[    0.004662] CPU features: detected: 32-bit EL0 Support
[    0.004669] CPU features: detected: CRC32 instructions
[    0.004724] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[    0.004734] CPU: All CPU(s) started at EL1
[    0.004756] alternatives: patching kernel code
[    0.011889] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.011927] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.012086] pinctrl core: initialized pinctrl subsystem
[    0.013136] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.013618] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[    0.013661] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.013698] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.014023] thermal_sys: Registered thermal governor 'step_wise'
[    0.015353] cpuidle: using governor menu
[    0.015560] ASID allocator initialised with 65536 entries
[    0.085418] cryptd: max_cpu_qlen set to 1000
[    0.088651] SCSI subsystem initialized
[    0.088828] usbcore: registered new interface driver usbfs
[    0.088876] usbcore: registered new interface driver hub
[    0.088914] usbcore: registered new device driver usb
[    0.089154] qcom_scm: convention: smc arm 64
[    0.090432] clocksource: Switched to clocksource arch_sys_counter
[    0.091089] NET: Registered PF_INET protocol family
[    0.091221] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.091777] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.091804] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.091819] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.091870] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.091951] TCP: Hash tables configured (established 4096 bind 4096)
[    0.092035] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.092064] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.092219] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.092253] PCI: CLS 0 bytes, default 64
[    0.098342] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.102088] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.102109] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.155800] xor: measuring software checksum speed
[    0.162066]    8regs           :  1577 MB/sec
[    0.167340]    32regs          :  1868 MB/sec
[    0.173712]    arm64_neon      :  1547 MB/sec
[    0.173721] xor: using function: 32regs (1868 MB/sec)
[    0.178485] bam-dma-engine 704000.dma: num-channels unspecified in dt
[    0.178512] bam-dma-engine 704000.dma: num-ees unspecified in dt
[    0.182313] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.182862] msm_serial 78b3000.serial: msm_serial: detected port #0
[    0.182902] msm_serial 78b3000.serial: uartclk = 3686400
[    0.182947] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 22, base_baud = 230400) is a MSM
[    0.182979] msm_serial: console setup on port #0
[    0.810457] printk: console [ttyMSM0] enabled
[    0.815451] msm_serial: driver initialized
[    0.823546] loop: module loaded
[    0.824895] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x61
[    0.826411] nand: ESMT PSR1GA30DT
[    0.833017] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    0.837008] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
[    0.844582] pmd9655_s3: supplied by regulator-dummy
[    0.849831] pmd9655_s4: supplied by regulator-dummy
[    0.854587] pmd9655_ldo11: supplied by regulator-dummy
[    0.872418] i2c_dev: i2c /dev entries driver
[    0.875844] sdhci: Secure Digital Host Controller Interface driver
[    0.875885] sdhci: Copyright(c) Pierre Ossman
[    0.881782] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.887107] NET: Registered PF_INET6 protocol family
[    0.892745] Segment Routing with IPv6
[    0.896887] In-situ OAM (IOAM) with IPv6
[    0.900490] NET: Registered PF_PACKET protocol family
[    0.904448] 8021q: 802.1Q VLAN Support v1.8
[    0.926073] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[    0.926363] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
[    0.932230] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1
[    0.938799] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
[    0.946587] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
[    0.953979] cpr3_mem_acc_init: apc: not using memory accelerator regulator
[    0.963110] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      SVS: open-loop= 704000 uV
[    0.970052] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      NOM: open-loop= 808000 uV
[    0.980041] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused    TURBO: open-loop= 864000 uV
[    0.989855] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused   STURBO: open-loop= 944000 uV
[    0.999706] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      SVS: quot[ 7]= 719, quot_offset[ 7]=   0
[    1.009471] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      NOM: quot[ 7]= 923, quot_offset[ 7]= 200
[    1.020321] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused    TURBO: quot[ 7]=1022, quot_offset[ 7]=  95
[    1.031258] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused   STURBO: quot[ 7]=1175, quot_offset[ 7]= 150
[    1.042327] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
[    1.044327] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x61
[    1.059890] nand: ESMT PSR1GA30DT
[    1.066313] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.069794] 15 qcomsmem partitions found on MTD device qcom_nand.0
[    1.077008] Creating 15 MTD partitions on "qcom_nand.0":
[    1.083163] 0x000000000000-0x000000100000 : "0:sbl1"
[    1.090013] 0x000000100000-0x000000200000 : "0:mibib"
[    1.094885] 0x000000200000-0x000000500000 : "0:qsee"
[    1.101650] 0x000000500000-0x000000580000 : "0:devcfg"
[    1.104378] 0x000000580000-0x000000600000 : "0:rpm"
[    1.109315] 0x000000600000-0x000000680000 : "0:cdt"
[    1.114179] 0x000000680000-0x000000700000 : "0:appsblenv"
[    1.118964] 0x000000700000-0x000000800000 : "0:appsbl"
[    1.125027] 0x000000800000-0x000000880000 : "0:art"
[    1.129545] 0x000000880000-0x000000900000 : "bdata"
[    1.134354] 0x000000900000-0x000000980000 : "crash"
[    1.139184] 0x000000980000-0x000000a00000 : "crash_syslog"
[    1.144087] 0x000000a00000-0x000002dc0000 : "rootfs"
[    1.182067] mtd: device 12 (rootfs) set to be root filesystem
[    1.182417] mtdsplit: no squashfs found in "rootfs"
[    1.186799] 0x000002dc0000-0x000007040000 : "rootfs_1"
[    1.253019] 0x000007040000-0x0000070c0000 : "rsvd0"
[    1.259294] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 800000 KHz, changing to: 1017600 KHz
[    1.260494] remoteproc remoteproc0: cd00000.q6v5_wcss is available
[    1.269261] ubi0: attaching mtd12
[    1.471183] ubi0: scanning is finished
[    1.478413] ubi0: attached mtd12 (name "rootfs", size 35 MiB)
[    1.478450] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.483157] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.489914] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.496785] ubi0: good PEBs: 286, bad PEBs: 0, corrupted PEBs: 0
[    1.503546] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    1.509794] ubi0: max/mean erase counter: 3/0, WL threshold: 4096, image sequence number: 1138970629
[    1.516836] ubi0: available PEBs: 10, total reserved PEBs: 276, PEBs reserved for bad PEB ha▒[    1.535441] Waiting for root device /dev/ubiblock0_1...
[   31.830455] pmd9655_ldo11: disabling
？

这是TTL导出来的信息，扩充了容量，刷了op15的系统，可以进入，然后web升级了一个固件就进不去了，黄灯长亮，就买了usb转ttl，连接好了，导出来就是这些信息，这是不是深度砖了？？？

skyf***

我自己搞明白怎么回事了 原来是通电前就要按住回车键 不然肯定是来不及的 太快了

zi***

skyfelix 发表于 2022-7-31 16:50
我自己搞明白怎么回事了 原来是通电前就要按住回车键 不然肯定是来不及的 太快了
...

我的AX6  TTL也不能中断，按楼主的方法也不行，boot_wait  是off,不知怎么处理