红米AX5求助，红米AX5求助，

lqb06251

本人有一台红米AX5,RA67刷机过程中把NAND闪存弄坏了，，，手里有编程器，热心网友也给我传了一份编程器固件，可现在就是开机闪烁，然后不断重启，不知道什么原因，，请大神指导



Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.XF.0.3-00077-IPQ60xxLZB-2
S - IMAGE_VARIANT_STRING=IPQ6018LA
S - OEM_IMAGE_VERSION_STRING=crm-ubuntu64
S - Boot Interface: NAND
S - Secure Boot: Off
S - Boot Config @ 0x000a602c = 0x000002e5
S - JTAG ID @ 0x000a607c = 0x001390e1
S - OEM ID @ 0x000a6080 = 0x00000000
S - Serial Number @ 0x000a4128 = 0x0fbfdd72
S - OEM Config Row 0 @ 0x000a4188 = 0x0000000000000000
S - OEM Config Row 1 @ 0x000a4190 = 0x0000000000000000
S - Feature Config Row 0 @ 0x000a4130 = 0x0000800018200021
S - Feature Config Row 1 @ 0x000a4138 = 0x02c3e83783000009
S - PBL Patch Ver: 1
S - I-cache: On
S - D-cache: On
B -      3413 - PBL, Start
B -       592 - bootable_media_detect_entry, Start
B -      4339 - bootable_media_detect_success, Start
B -      5147 - elf_loader_entry, Start
B -      5319 - auth_hash_seg_entry, Start
B -      7786 - auth_hash_seg_exit, Start
B -      8281 - elf_segs_hash_verify_entry, Start
B -    110468 - elf_segs_hash_verify_exit, Start
B -    114895 - auth_xbl_sec_hash_seg_entry, Start
B -    115039 - auth_xbl_sec_hash_seg_exit, Start
B -    121584 - xbl_sec_segs_hash_verify_entry, Start
B -    121585 - xbl_sec_segs_hash_verify_exit, Start
B -    122514 - PBL, End
B -    103303 - SBL1, Start
B -    243390 - GCC [RstStat:0x0, RstDbg:0x600000] WDog Stat : 0x4
B -    245830 - clock_init, Start
D -      2836 - clock_init, Delta
B -    254400 - boot_flash_init, Start
D -     29585 - boot_flash_init, Delta
B -    287188 - sbl1_ddr_set_default_params, Start
D -       213 - sbl1_ddr_set_default_params, Delta
B -    293806 - boot_config_data_table_init, Start
D -      4727 - boot_config_data_table_init, Delta - (575 Bytes)
B -    303597 - CDT Version:2,Platform ID:8,Major ID:3,Minor ID:2,Subtype:0
B -    308477 - Image Load, Start
D -      6618 - OEM_MISC Image Loaded, Delta - (0 Bytes)
B -    317810 - Image Load, Start
D -      5063 - PMIC Image Loaded, Delta - (0 Bytes)
B -    325709 - sbl1_ddr_set_params, Start
B -    330681 - CPR configuration: 0x366
B -    333883 - Pre_DDR_clock_init, Start
D -       183 - Pre_DDR_clock_init, Delta
D -         0 - sbl1_ddr_set_params, Delta
B -    370514 - Image Load, Start
D -       457 - APDP Image Loaded, Delta - (0 Bytes)
B -    383629 - Image Load, Start
D -       427 - QTI_MISC Image Loaded, Delta - (0 Bytes)
B -    386038 - Image Load, Start
D -       885 - Auth Metadata
D -       762 - Segments hash check
D -     22387 - QSEE Dev Config Image Loaded, Delta - (36354 Bytes)
B -    410377 - Image Load, Start
D -      6557 - Auth Metadata
D -     10645 - Segments hash check
D -    329858 - QSEE Image Loaded, Delta - (1470632 Bytes)
B -    740692 - Image Load, Start
D -       701 - Auth Metadata
D -       976 - Segments hash check
D -     34557 - RPM Image Loaded, Delta - (102664 Bytes)
B -    776926 - Image Load, Start
D -       702 - Auth Metadata
D -      3081 - Segments hash check
D -    115961 - APPSBL Image Loaded, Delta - (544160 Bytes)
B -    908503 - SBL1, End
D -    805505 - SBL1, Delta
S - Flash Throughput, 5000 KB/s  (2155057 Bytes,  423178 us)
S - Core 0 Frequency, 800 MHz
S - DDR Frequency, 466 MHz


U-Boot 2016.01 (Jan 29 2021 - 08:03:41 +0000), Build: jenkins-common_router_openwrt_ota_publish-814

DRAM:  smem ram ptable found: ver: 2 len: 4
256 MiB
NAND:  ONFI device found
ID = 9500f1ef
Vendor = ef
Device = f1
SF: Unsupported flash IDs: manuf 00, jedec 0000, ext_jedec 0000
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
128 MiB
MMC:   sdhci: Node Not found, skipping initialization

PCI0 is not defined in the device tree
In:    serial@78B1000
Out:   serial@78B1000
Err:   serial@78B1000
machid: 8030200
eth0 MAC Address from ART is not valid,use random ethaddr
### main_loop: bootcmd="bootmiwifi"
Hit any key to stop autoboot:  0
trigger button release!
boot from rootfs 1
  miwifi: check crash in rmem !  
ubi0: attaching mtd1
ubi0: scanning is finished
ubi0: attached mtd1 (name "mtd=0", size 36 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 288, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 265/17, WL threshold: 4096, image sequence number: 961333453
ubi0: available PEBs: 0, total reserved PEBs: 288, PEBs reserved for bad PEB handling: 20
Read 0 bytes from volume kernel to 44000000
No size specified -> Using max size (3809280)
qpic_nand_read_oob: ecc failure while reading from 35c1000
qpic_nand_read_oob: ecc failure while reading from 35c1000
qpic_nand_read_oob: ecc failure while reading from 35c1000
qpic_nand_read_oob: ecc failure while reading from 35c1000
read err ffffffb6
ubi0: detaching mtd1
ubi0: mtd1 is detached
Erasing NAND...
Erasing at 0x7e0000 -- 100% complete.
Writing to NAND... OK
resetting ...

矿佬

看不懂。直接66包含往返运费寄给我给你改装1g内存刷openwrt算了。联系133637337

httpcom126

闪存型号不对，你检察看看，我有次也这样

zhuoling1234

应该是内存小了，换个大内存，或者重新写原厂系统

啥都不懂咋办啊

vlv777 发表于 2022-11-22 03:56
看不懂。直接66包含往返运费寄给我给你改装1g内存刷openwrt算了。联系133637337

卧槽老板无处不在啊哈哈

qq285591764

支持下....