How to access IPv6 via IPv4

kover

Due to the lack of a v4 public address, the server was built with v6
The router at home supports both v4 and v6
However, because the set-top box is relatively old, V6 is not supported
Is there any way to get the router to access v6 and then forward it to the v4 set-top box?
That is, the set-top box forwards access to the v6 server through the router

zhy9559

Use an IPv6-capable private machine (such as a soft router or server) to forward a port of IPv6 to IPv4

liaohcai

With the socat plugin

kover

zhy9559 Posted on 2023-1-31 23:49
Use an IPv6-capable private machine (such as a soft router or server) to forward a port of IPv6 to IPv4

Does the Lao Maozi system support it?

kover

Liaohcai Posted on 2023-2-1 02:04
With the socat plugin

The old Maozi system doesn't seem to support it.,My router doesn't prompt the opkg command.,The original system doesn't have this plug-in.,Can't install it.

liaohcai

kover Posted on 2023-2-1 07:19
The old Maozi system doesn't seem to support it.,My router doesn't prompt the opkg command.,The original system doesn't have this plug-in.,Can't install it.

Extract the socat in the archive to the /etc/storage directory of Padavan, and give it the run permission.
Running on SSH Terminal:

1. /etc/storage/socat TCP6-LISTEN:4431,ipv6-v6only,reuseaddr,fork TCP6:domain name:443 &

Copy the code

1. /etc/storage/socat TCP6-LISTEN:801,ipv6-v6only,reuseaddr,fork TCP6:domain name:80 &

Copy the code

Finally, you can use direct access router IP:801 or IP:4431 to access the content of the IPV6 domain website
What if you want to access domain name2?
It is simple, too

1. /etc/storage/socat TCP6-LISTEN:4432,ipv6-v6only,reuseaddr,fork TCP6:domain name 2:443 &

Copy the code

1. /etc/storage/socat TCP6-LISTEN:802,ipv6-v6only,reuseaddr,fork TCP6:domain name 2:80 &

Copy the code

Finally, you can use direct access router IP:802 or IP:4432 to access the content of the IPV6 domain website

kover

Posted by liaohcai on 2023-2-2 02:20
Extract the socat in the archive to the /etc/storage directory of Padavan, and give it the run permission.
Running on SSH Terminal:

I'll give it a try, thanks in advance. I'll reply if I can

kover

Posted by liaohcai on 2023-2-2 02:20
Extract the socat in the archive to the /etc/storage directory of Padavan, and give it the run permission.
Running on SSH Terminal:

No, I feel like the TCP6-LISTEN port you wrote scans v6, and it can't be accessed with v4


/etc/storage/socat TCP4-LISTEN:88,bind=0.0.0.0,reuseaddr,fork TCP6:domain name:80 &

I changed it to like this, as if it was okay

liaohcai

Also look like this LISTEN:88,ipv4,reuseaddr,fork TCP6:domain name:80&

cityren

Posted by liaohcai on 2023-2-2 02:20
Extract the socat in the archive to the /etc/storage directory of Padavan, and give it the run permission.
Running on SSH Terminal:

Thanks for sharing, stream batch

King13

T 66666