找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
查看: 2912|回复: 3

【求助】wrt610n v1 刷TT变砖了,无法刷回来,请各位DD帮忙看下

[复制链接]
朋友一台WRT610N V1坏了,给我看看。该设备无线连接正常,但WAN口和LAN口均不能正常工作。去官网下的最新固件,刷上去,还是一样。后来去DD网上下了个固件,刷上去,可以正常启动,可以通过无线打开192.168.1.1,但是WAN口和LAN口还是不能正常工作。

在刷了DD也不行的情况下,我悲催地刷了TT K.26 8M的固件tomato-K26USB-1.28.0542-MIPSR1-8M.trx,于是乎,610启动不了了,无线连不上了,系统开机后电源灯狂闪一阵后,重启。我用TTL线连接610 V1的TTL接口,成功进入CFE模式,但是电脑端指定IP(192.168.1.100,255.255.255.0,192.168.1.1)后,居然PING 不通192.168.1.1 .
(电脑端ARP -A 显示出来的192.168.1.1 的MAC地址全是0,即使我手工指定正确的MAC地址给它,也无法连通192.168.1.1)

CFE模式下 ,IFCONFIG 出来的EHT0 IP地址是192.168.1.1 ,MAC地址也是对的。就是无法连通。也就无法TFTP了。各位DD们有什么方法帮我解决这个问题吗?{:soso_e115:}{:soso_e109:}

下附系统启动LOG.
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Wed Jun 25 19:11:21 CST 2008 (ljh@team2-complier)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing PCI. [normal]
PCI bus 0 slot 0/0: vendor 0x14e4 product 0x0800 (flash memory, rev 0x02)
PCI bus 0 slot 1/0: vendor 0x14e4 product 0x471f (ethernet network)
PCI bus 0 slot 2/0: vendor 0x14e4 product 0x471a (USB serial bus, interface 0x10
, rev 0x02)
PCI bus 0 slot 2/1: vendor 0x14e4 product 0x471a (USB serial bus, interface 0x20
, rev 0x02)
PCI bus 0 slot 3/0: vendor 0x14e4 product 0x471b (USB serial bus, rev 0x02)
PCI bus 0 slot 4/0: vendor 0x14e4 product 0x0804 (PCI bridge, rev 0x02)
PCI bus 0 slot 5/0: vendor 0x14e4 product 0x0816 (MIPS processor, rev 0x02)
PCI bus 0 slot 6/0: vendor 0x14e4 product 0x471d (IDE mass storage, rev 0x02)
PCI bus 0 slot 7/0: vendor 0x14e4 product 0x4718 (network/computing crypto, rev
0x02)
PCI bus 0 slot 8/0: vendor 0x14e4 product 0x080f (RAM memory, rev 0x02)
PCI bus 0 slot 9/0: vendor 0x14e4 product 0x471e (class 0xfe, subclass 0x00, rev
0x02)
Initializing Devices.
No DPN
This is a Parallel Flash
Boot partition size = 262144(0x40000)
Partition information:
boot    #00   00000000 -> 0003FFFF  (262144)
trx     #01   00040000 -> 0004001B  (28)
os      #02   0004001C -> 007F7FFF  (8093668)
nvram   #03   007F8000 -> 007FFFFF  (32768)
Partition information:
boot    #00   00000000 -> 0003FFFF  (262144)
trx     #01   00040000 -> 007F7FFF  (8093696)
nvram   #02   007F8000 -> 007FFFFF  (32768)
PCI bus 0 slot 1/0: pci_map_mem: attempt to map 64-bit region tag=0x800 @ addr=1
8010004
PCI bus 0 slot 1/0: pci_map_mem: addr=0x18010004 pa=0x18010000
ge0: BCM5750 Ethernet at 0x18010000
CPU type 0x2901A: 300MHz
Total memory: 65536 KBytes
Total memory used by CFE:  0x80700000 - 0x807A60E0 (680160)
Initialized Data:          0x8073A2E0 - 0x8073E570 (17040)
BSS Area:                  0x8073E570 - 0x807400E0 (7024)
Local Heap:                0x807400E0 - 0x807A40E0 (409600)
Stack Area:                0x807A40E0 - 0x807A60E0 (8192)
Text (code) segment:       0x80700000 - 0x8073A2E0 (238304)
Boot area (physical):      0x007A7000 - 0x007E7000
Relocation Factor:         I:00000000 - D:00000000
Boot version: v4.2
The boot is CFE
mac_init(): Find mac [00:22:6B:84:9F:C7] in location 0
Nothing...
country_init(): Find country code in location 0
The country is same
CMD: [ifconfig eth0 -addr=192.168.1.1 -mask=255.255.255.0]
eth0: Link speed: 1000BaseT FDX
Device eth0:  hwaddr 00-22-6B-84-9F-C7, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
CMD: [go;]
Check CRC of image1
  Len:     0x6CD000     (7131136)       (0xBC040000)
  Offset0: 0x1C         (28)            (0xBC04001C)
  Offset1: 0xAD8        (2776)  (0xBC040AD8)
  Offset2: 0xE4800      (935936)        (0xBC124800)
  Header CRC:    0x6B4CE854
  Calculate CRC: 0x6B4CE854
Image 1 is OK
Try to load image 1.
CMD: [load -raw -addr=0x807a60e0 -max=0x3a0000 :]
Loader:raw Filesys:tftp Dev:eth0 File:: Optionsnull)
Loading: Failed.
Could not load :: Timeout occured
CMD: [boot -raw -z -addr=0x80001000 -max=0x3a0000 flash0.os:]
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: .. 5192 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Linux version 2.6.22.19 (root@tomato) (gcc version 4.2.4) #1 Tue Jan 17 15:02:52
CST 2012
CPU revision is: 0002901a
Setting the PFC to its default value
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Built 1 zonelists.  Total pages: 16256
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
Primary instruction cache 32kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 32kB, 2-way, linesize 16 bytes.
Synthesized TLB refill handler (19 instructions).
Synthesized TLB load handler fastpath (31 instructions).
Synthesized TLB store handler fastpath (31 instructions).
Synthesized TLB modify handler fastpath (30 instructions).
PID hash table entries: 256 (order: 8, 1024 bytes)
CPU: BCM4785 rev 2 pkg 12 at 300 MHz
Using 150.000 MHz high precision timer.
console [ttyS0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 61848k/65536k available (2317k kernel code, 3628k reserved, 456k data, 1
12k init, 0k highmem)
SLUB: Genslabs=6, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Initializing host
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bus 1
Time: MIPS clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
squashfs: version 3.0 (2006/03/15) Phillip Lougher
io scheduler noop registered (default)
HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 8) is a 16550A
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
MPPE/MPPC encryption/compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V0.17
PPTP driver version 0.8.5
Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Flash device: 0x800000 at 0x1c000000
Creating 5 MTD partitions on "hysically mapped flash":
0x00000000-0x00040000 : "pmon"
0x00040000-0x007f0000 : "linux"
0x00124800-0x00710000 : "rootfs"
0x00710000-0x007f0000 : "jffs2"
0x007f0000-0x00800000 : "nvram"
Found a 0MB  serial flash
sflash: found no supported devices
u32 classifier
    OLD policer on
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (512 buckets, 4096 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
net/ipv4/netfilter/tomato_ct.c [Jan 17 2012 15:02:52]
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 112k freed
Warning: unable to open an initial console.
我的恩山、我的无线 The best wifi forum is right here.
610n v1  怎么可以刷tt?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| | 显示全部楼层
所以说,蛮悲催的。{:soso_e115:}
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| | 显示全部楼层
唉,不折腾了,出尸体了,外表无损良好,无划痕,内部没改过,故障现象如上文,有意者带价联系我吧!
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

欢迎大家光临恩山无线论坛上一条 /1 下一条

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-4-28 18:34

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表