MOTO 850G不行了，怎样用TTL线修复啊？

ch***

电源灯红色的

CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Fri Mar 26 14:00:09 CST 2004 (xavier@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena.
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.50.21.0
CPU type 0x29007: 200MHz
Total memory: 0x2000000 bytes (32MB)

Total memory used by CFE:  0x8032C690 - 0x80431FB0 (1071392)
Initialized Data:          0x8032C690 - 0x8032EC00 (9584)
BSS Area:                  0x8032EC00 - 0x8032FFB0 (5040)
Local Heap:                0x8032FFB0 - 0x8042FFB0 (1048576)
Stack Area:                0x8042FFB0 - 0x80431FB0 (8192)
Text (code) segment:       0x80300000 - 0x80309940 (39232)
Boot area (physical):      0x00432000 - 0x00472000
Relocation Factor:         I:00000000 - D:00000000

Checking MAC address...
MAC address is correct.

wl_hwaddr error. Skip GPLUS check.
Device eth0:  hwaddr 00-0C-E5-53-90-6F, ipaddr 192.168.10.1, mask 255.255.255.0
        gateway not set, nameserver not set

    *CFE for Motorola WR850G v3.01 [AFTERBURNER], Release date: Mar. 26, 2004

Reading ::
起动到这里就不行了，不能进CFE>

恩山***

原帖由 chyao 于 2007-3-30 12:45 发表
电源灯红色的

CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Fri Mar 26 14:00:09 CST 2004 (xavier@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

...

仔细看这里：https://www.right.com.cn/forum/v ... &extra=page%3D1

ch***

仔细看了啊，起动到
wl_hwaddr error. Skip GPLUS check.
Device eth0:  hwaddr 00-0C-E5-53-90-6F, ipaddr 192.168.10.1, mask 255.255.255.0
        gateway not set, nameserver not set

    *CFE for Motorola WR850G v3.01 [AFTERBURNER], Release date: Mar. 26, 2004

Reading ::
不动了？？

恩山***

再仔细点看看………………里面已经说了方法了

lion***

你还是用 JTAG 吧，TTL 线有时是修不好的。
我那个850最后都是用JTAG修好的，TTL 搞来搞去都是不行。

ch***

我没有JTAG啊，看来自己修不了了，寄回去给恩山算了