|
|
本帖最后由 w1634w 于 2017-11-11 13:33 编辑
按照楼主的方法、设置步骤，最终无法实现用本人的小米note顶配版安卓手机通过USB共享网络上网，求解？？？？？？？？？？？？？
root@LEDE:~# lsusb
Bus 003 Device 003: ID 2717:ff88
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@LEDE:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.60 (w1634w@w1634w-virtual-machine) (gcc version 5.4.0 (LEDE GCC 5.4.0 r204-f56a918) ) #0 SMP Sat Nov 4 07:39:50 2017
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt:Machine model: Netgear Nighthawk X4S R7800
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 122880
[ 0.000000] free_area_init_node: node 0, pgdat c0736180, node_mem_map dda39000
[ 0.000000] Normal zone: 960 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 122880 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 13 pages/cpu @dda04000 s20940 r8192 d24116 u53248
[ 0.000000] pcpu-alloc: s20940 r8192 d24116 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
[ 0.000000] Kernel command line:
[ 0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 479404K/491520K available (3936K kernel code, 250K rwdata, 748K rodata, 236K init, 242K bss, 12116K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc05e0588 (3938 kB)
[ 0.000000] .init : 0xc06bd000 - 0xc06f8000 ( 236 kB)
[ 0.000000] .data : 0xc06f8000 - 0xc0736a80 ( 251 kB)
[ 0.000000] .bss : 0xc0738000 - 0xc07749c8 ( 243 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000022] Switching to timer-based delay loop, resolution 160ns
[ 0.000231] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000251] pid_max: default: 32768 minimum: 301
[ 0.000355] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000369] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001028] CPU: Testing write buffer coherency: ok
[ 0.001305] Setting up static identity map for 0x42208280 - 0x422082d8
[ 0.004626] Brought up 2 CPUs
[ 0.004643] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.004652] CPU: All CPU(s) started in SVC mode.
[ 0.017755] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.017953] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.017980] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.018062] pinctrl core: initialized pinctrl subsystem
[ 0.019362] NET: Registered protocol family 16
[ 0.019605] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.051769] cpuidle: using governor ladder
[ 0.082785] cpuidle: using governor menu
[ 0.084956] qcom_rpm 108000.rpm: could not find pctldev for node /soc/pinmux@800000/i2c4_pinmux, deferring probe
[ 0.135460] msm_bus_fabric_init_driver
[ 0.136967] usbcore: registered new interface driver usbfs
[ 0.137066] usbcore: registered new interface driver hub
[ 0.137151] usbcore: registered new device driver usb
[ 0.137208] pps_core: LinuxPPS API ver. 1 registered
[ 0.137221] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.137253] PTP clock support registered
[ 0.139262] clocksource: Switched to clocksource dg_timer
[ 0.143353] NET: Registered protocol family 2
[ 0.144016] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.144062] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.144121] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.144175] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.144199] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.144380] NET: Registered protocol family 1
[ 0.144430] PCI: CLS 0 bytes, default 64
[ 0.145911] No memory allocated for crashlog
[ 0.146252] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.152936] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.152952] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.160802] io scheduler noop registered
[ 0.160820] io scheduler deadline registered (default)
[ 0.162595] 1b500000.pci supply vdda not found, using dummy regulator
[ 0.162717] 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.162810] 1b500000.pci supply vdda_refclk not found, using dummy regulator
[ 0.163590] OF: PCI: host bridge /soc/pci@1b500000 ranges:
[ 0.163631] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[ 0.163658] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
[ 0.271401] qcom-pcie 1b500000.pci: link up
[ 0.273398] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.273419] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.273438] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[ 0.273453] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.273469] pci_bus 0000:00: scanning bus
[ 0.273513] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.273598] pci 0000:00:00.0: calling 0xc0213b14
[ 0.273666] pci 0000:00:00.0: supports D1
[ 0.273675] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.273693] pci 0000:00:00.0: PME# disabled
[ 0.273961] pci_bus 0000:00: fixups for bus
[ 0.273986] PCI: bus0: Fast back to back transfers disabled
[ 0.274008] pci 0000:00:00.0: scanning [bus 01-01] behind bridge, pass 0
[ 0.274140] pci_bus 0000:01: scanning bus
[ 0.274315] pci 0000:01:00.0: [168c:0046] type 00 class 0x028000
[ 0.274543] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.274985] pci 0000:01:00.0: calling 0xc0213b14
[ 0.275625] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.275665] pci 0000:01:00.0: PME# disabled
[ 0.276006] pci_bus 0000:01: fixups for bus
[ 0.276074] PCI: bus1: Fast back to back transfers disabled
[ 0.276090] pci_bus 0000:01: bus scan returning with max=01
[ 0.276108] pci 0000:00:00.0: scanning [bus 01-01] behind bridge, pass 1
[ 0.276125] pci_bus 0000:00: bus scan returning with max=01
[ 0.276268] pci 0000:00:00.0: fixup irq: got 136
[ 0.276279] pci 0000:00:00.0: assigning IRQ 136
[ 0.276362] pci 0000:01:00.0: fixup irq: got 136
[ 0.276371] pci 0000:01:00.0: assigning IRQ 136
[ 0.276436] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[ 0.276460] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.276587] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.276610] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.276997] aer 0000:00:00.0:pcie002: service driver aer loaded
[ 0.277396] 1b700000.pci supply vdda not found, using dummy regulator
[ 0.277488] 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.277585] 1b700000.pci supply vdda_refclk not found, using dummy regulator
[ 0.278364] OF: PCI: host bridge /soc/pci@1b700000 ranges:
[ 0.278402] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
[ 0.278425] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
[ 0.388485] qcom-pcie 1b700000.pci: link up
[ 0.390453] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.390471] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.390486] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.390500] pci_bus 0001:00: scanning bus
[ 0.390539] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.390608] pci 0001:00:00.0: calling 0xc0213b14
[ 0.390668] pci 0001:00:00.0: supports D1
[ 0.390678] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.390691] pci 0001:00:00.0: PME# disabled
[ 0.390929] pci_bus 0001:00: fixups for bus
[ 0.390947] PCI: bus0: Fast back to back transfers disabled
[ 0.390963] pci 0001:00:00.0: scanning [bus 01-01] behind bridge, pass 0
[ 0.391102] pci_bus 0001:01: scanning bus
[ 0.391274] pci 0001:01:00.0: [168c:0046] type 00 class 0x028000
[ 0.391496] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.391937] pci 0001:01:00.0: calling 0xc0213b14
[ 0.392574] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.392615] pci 0001:01:00.0: PME# disabled
[ 0.392961] pci_bus 0001:01: fixups for bus
[ 0.393030] PCI: bus1: Fast back to back transfers disabled
[ 0.393043] pci_bus 0001:01: bus scan returning with max=01
[ 0.393058] pci 0001:00:00.0: scanning [bus 01-01] behind bridge, pass 1
[ 0.393074] pci_bus 0001:00: bus scan returning with max=01
[ 0.393138] pcieport 0000:00:00.0: fixup irq: got 136
[ 0.393147] pcieport 0000:00:00.0: assigning IRQ 136
[ 0.393226] pci 0000:01:00.0: fixup irq: got 136
[ 0.393235] pci 0000:01:00.0: assigning IRQ 136
[ 0.393364] pci 0001:00:00.0: fixup irq: got 169
[ 0.393373] pci 0001:00:00.0: assigning IRQ 169
[ 0.393451] pci 0001:01:00.0: fixup irq: got 169
[ 0.393461] pci 0001:01:00.0: assigning IRQ 169
[ 0.393514] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.393536] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.393657] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 0.393676] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.394027] aer 0001:00:00.0:pcie002: service driver aer loaded
[ 0.396877] L2 @ QSB rate. Forcing new rate.
[ 0.397069] L2 @ 384000 KHz
[ 0.397248] CPU0 @ 800000 KHz
[ 0.397260] CPU1 @ QSB rate. Forcing new rate.
[ 0.397384] CPU1 @ 384000 KHz
[ 0.401801] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 0.403293] gsbi 1a200000.gsbi: GSBI port protocol: 3 crci: 0
[ 0.404908] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.405849] msm_serial 16340000.serial: msm_serial: detected port #0
[ 0.405951] msm_serial 16340000.serial: uartclk = 7372800
[ 0.406035] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 170, base_baud = 460800) is a MSM
[ 0.406071] msm_serial: console setup on port #0
[ 1.113644] console [ttyMSM0] enabled
[ 1.118385] msm_serial: driver initialized
[ 1.129910] loop: module loaded
[ 1.131965] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
[ 1.131999] nand: AMD/Spansion S34MS01G2
[ 1.138457] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.142552] 10 ofpart partitions found on MTD device qcom_nand.0
[ 1.149835] Creating 10 MTD partitions on "qcom_nand.0":
[ 1.155910] 0x000000000000-0x000000c80000 : "qcadata"
[ 1.166218] random: fast init done
[ 1.183537] 0x000000c80000-0x000001180000 : "APPSBL"
[ 1.193312] 0x000001180000-0x000001200000 : "APPSBLENV"
[ 1.196138] 0x000001200000-0x000001340000 : "art"
[ 1.201572] 0x000001340000-0x000001480000 : "artbak"
[ 1.206344] 0x000001480000-0x000001680000 : "kernel"
[ 1.212692] 0x000001680000-0x000003480000 : "ubi"
[ 1.270465] 0x000003480000-0x000007900000 : "netgear"
[ 1.400580] 0x000007900000-0x000008000000 : "reserve"
[ 1.415342] 0x000001480000-0x000003480000 : "firmware"
[ 1.478233] no rootfs found after FIT image in "firmware"
[ 1.479745] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 1.484851] m25p80 spi32766.0: unrecognized JEDEC id bytes: 00, 00, 00
[ 1.489888] m25p80: probe of spi32766.0 failed with error -2
[ 1.497525] libphy: GPIO Bitbanged MDIO: probed
[ 1.533860] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[ 2.529412] libphy: Fixed MDIO Bus: probed
[ 2.529453] libphy: mdio_driver_register: qca8k
[ 2.536071] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 2.536837] Ring mode enabled
[ 2.542157] DMA HW capability register supported
[ 2.544998] Enhanced/Alternate descriptors
[ 2.550731] Enabled extended descriptors
[ 2.553594] RX Checksum Offload Engine supported
[ 2.557761] COE Type 2
[ 2.562536] TX Checksum insertion supported
[ 2.564706] Wake-Up On Lan supported
[ 2.569220] Enable RX Mitigation via HW Watchdog Timer
[ 2.575437] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 2.577815] Ring mode enabled
[ 2.583129] DMA HW capability register supported
[ 2.585973] Enhanced/Alternate descriptors
[ 2.591616] Enabled extended descriptors
[ 2.594574] RX Checksum Offload Engine supported
[ 2.598743] COE Type 2
[ 2.603492] TX Checksum insertion supported
[ 2.605684] Wake-Up On Lan supported
[ 2.610272] Enable RX Mitigation via HW Watchdog Timer
[ 2.615084] i2c /dev entries driver
[ 2.620302] Calibration not found.
[ 2.622274] qcom-tsens 900000.thermal-sensor: tsens calibration failed
[ 2.627510] Speed bin: 0
[ 2.632330] PVS bin: 3
[ 2.637471] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[ 2.637581] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[ 2.645259] sdhci: Secure Digital Host Controller Interface driver
[ 2.651694] sdhci: Copyright(c) Pierre Ossman
[ 2.657858] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.665360] NET: Registered protocol family 10
[ 2.670584] NET: Registered protocol family 17
[ 2.672730] 8021q: 802.1Q VLAN Support v1.8
[ 2.676762] Registering SWP/SWPB emulation handler
[ 2.698203] qcom_rpm 108000.rpm: RPM firmware 3.0.16777364
[ 2.712945] s1a: Bringing 0uV into 1050000-1050000uV
[ 2.713451] s1b: Bringing 0uV into 1050000-1050000uV
[ 2.717424] s2a: Bringing 0uV into 775000-775000uV
[ 2.722521] s2b: Bringing 0uV into 775000-775000uV
[ 2.730949] of: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19
[ 2.732112] of: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:1, -19
[ 2.740831] UBI: auto-attach mtd6
[ 2.747196] ubi0: attaching mtd6
[ 2.880154] random: crng init done
[ 2.918091] UBI: EOF marker found, PEBs from 56 will be erased
[ 2.942853] ubi0: scanning is finished
[ 2.972830] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 162 LEBs
[ 2.973284] ubi0: attached mtd6 (name "ubi", size 30 MiB)
[ 2.978236] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.983770] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.990545] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.997334] ubi0: good PEBs: 240, bad PEBs: 0, corrupted PEBs: 0
[ 3.004168] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 3.010416] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1655104278
[ 3.017391] ubi0: available PEBs: 0, total reserved PEBs: 240, PEBs reserved for bad PEB handling: 20
[ 3.027351] ubi0: background thread "ubi_bgt0d" started, PID 78
[ 3.036459] block ubiblock0_0: created from ubi0:0(rootfs)
[ 3.041609] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 3.047111] hctosys: unable to open rtc device (rtc0)
[ 3.684141] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 3.684375] Freeing unused kernel memory: 236K
[ 3.690328] This architecture does not have kernel memory protection.
[ 5.048208] init: Console is alive
[ 5.048461] init: - watchdog -
[ 6.951368] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 7.216354] exFAT: Version 1.2.9
[ 7.222442] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.223936] SCSI subsystem initialized
[ 7.229695] libata version 3.00 loaded.
[ 7.231498] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
[ 7.231609] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 7.237061] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[ 7.246396] scsi host0: ahci
[ 7.254156] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 95
[ 7.581920] ata1: SATA link down (SStatus 0 SControl 300)
[ 7.583183] ehci-platform: EHCI generic platform driver
[ 7.588461] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.591763] ohci-platform: OHCI generic platform driver
[ 7.720148] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 7.720225] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 7.724784] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 7.732281] xhci-hcd xhci-hcd.0.auto: irq 172, io mem 0x11000000
[ 7.741967] hub 1-0:1.0: USB hub found
[ 7.747080] hub 1-0:1.0: 1 port detected
[ 7.751147] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 7.754674] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 7.760274] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 7.768457] hub 2-0:1.0: USB hub found
[ 7.776001] hub 2-0:1.0: 1 port detected
[ 7.780016] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 7.783507] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 7.789030] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 7.796466] xhci-hcd xhci-hcd.1.auto: irq 173, io mem 0x10000000
[ 7.806099] hub 3-0:1.0: USB hub found
[ 7.811545] hub 3-0:1.0: 1 port detected
[ 7.814974] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 7.818891] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 7.824319] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 7.832176] hub 4-0:1.0: USB hub found
[ 7.840144] hub 4-0:1.0: 1 port detected
[ 7.845945] usbcore: registered new interface driver usb-storage
[ 7.847777] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 7.855921] init: - preinit -
[ 12.228328] dwmac1000: Master AXI performs any burst length
[ 12.228401] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 12.233136] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 12.242189] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 13.291629] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 13.291696] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 15.437149] mount_root: loading kmods from internal overlay
[ 15.483747] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 15.493383] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 16.103432] blk_update_request: I/O error, dev mtdblock0, sector 0
[ 16.104378] blk_update_request: I/O error, dev mtdblock0, sector 8
[ 16.109418] blk_update_request: I/O error, dev mtdblock0, sector 16
[ 16.115661] blk_update_request: I/O error, dev mtdblock0, sector 24
[ 16.121985] blk_update_request: I/O error, dev mtdblock0, sector 0
[ 16.127098] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 16.134729] blk_update_request: I/O error, dev mtdblock1, sector 0
[ 16.141369] blk_update_request: I/O error, dev mtdblock1, sector 8
[ 16.147524] blk_update_request: I/O error, dev mtdblock1, sector 16
[ 16.153763] blk_update_request: I/O error, dev mtdblock1, sector 24
[ 16.160244] blk_update_request: I/O error, dev mtdblock1, sector 0
[ 16.165376] Buffer I/O error on dev mtdblock1, logical block 0, async page read
[ 16.654952] UBIFS (ubi0:1): default file-system created
[ 16.679858] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 164
[ 16.802124] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 16.802172] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 16.808953] UBIFS (ubi0:1): FS size: 19300352 bytes (18 MiB, 152 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
[ 16.818927] UBIFS (ubi0:1): reserved for root: 911602 bytes (890 KiB)
[ 16.829184] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID E1561F06-4489-4FAD-84A8-091DD98D67FD, small LPT model
[ 16.837354] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 16.846998] block: unable to load configuration (fstab: Entry not found)
[ 16.853741] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
[ 16.860695] block: unable to load configuration (fstab: Entry not found)
[ 16.866950] block: attempting to load /etc/config/fstab
[ 16.874685] block: extroot: not configured
[ 16.949649] UBIFS (ubi0:1): un-mount UBI device 0
[ 16.949677] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[ 16.957432] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 165
[ 17.080828] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 17.080868] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 17.087666] UBIFS (ubi0:1): FS size: 19300352 bytes (18 MiB, 152 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
[ 17.097632] UBIFS (ubi0:1): reserved for root: 911602 bytes (890 KiB)
[ 17.107863] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID E1561F06-4489-4FAD-84A8-091DD98D67FD, small LPT model
[ 17.126588] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 17.130085] Buffer I/O error on dev mtdblock1, logical block 0, async page read
[ 17.830996] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 17.831232] block: unable to load configuration (fstab: Entry not found)
[ 17.836894] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
[ 17.844039] block: unable to load configuration (fstab: Entry not found)
[ 17.850336] block: attempting to load /etc/config/fstab
[ 17.857461] block: extroot: not configured
[ 17.901343] mount_root: overlay filesystem has not been fully initialized yet
[ 17.901847] mount_root: switching to ubifs overlay
[ 17.934876] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 18.127557] procd: - early -
[ 18.127689] procd: - watchdog -
[ 18.969844] procd: - watchdog -
[ 18.970359] procd: - ubus -
[ 19.582096] procd: - init -
[ 19.755496] kmodloader: loading kernel modules from /etc/modules.d/*
[ 19.762201] Initializing XFRM netlink socket
[ 19.762704] NET: Registered protocol family 15
[ 19.773892] gre: GRE over IPv4 demultiplexor driver
[ 19.774472] ip_gre: GRE over IPv4 tunneling driver
[ 19.780090] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 19.785398] Netfilter messages via NETLINK v0.30.
[ 19.793105] ip_set: protocol 6
[ 19.805240] Loading modules backported from Linux version wt-2017-10-06-0-ga7a22fbbd1f0
[ 19.805263] Backport generated by backports.git v4.14-rc2-1-6-gedfb595c
[ 19.904914] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 19.904995] ath10k_pci 0000:01:00.0: enabling bus mastering
[ 19.905448] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 20.137440] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[ 20.137493] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 28.114218] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
[ 28.114269] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 28.164241] firmware ath10k!QCA9984!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 28.578004] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 28.578069] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 28.596552] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.4-00082 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast crc32 f301de65
[ 30.871877] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:1 crc32 751efba1
[ 36.724489] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 36.811772] ath: EEPROM regdomain: 0x0
[ 36.811778] ath: EEPROM indicates default country code should be used
[ 36.811783] ath: doing EEPROM country->regdmn map search
[ 36.811791] ath: country maps to regdmn code: 0x3a
[ 36.811796] ath: Country alpha2 being used: US
[ 36.811801] ath: Regpair used: 0x3a
[ 36.815899] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 36.815993] ath10k_pci 0001:01:00.0: enabling bus mastering
[ 36.816480] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 37.011153] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2
[ 37.011195] ath10k_pci 0001:01:00.0: Falling back to user helper
[ 38.075003] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
[ 38.075035] ath10k_pci 0001:01:00.0: Falling back to user helper
[ 38.107121] firmware ath10k!QCA9984!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 38.107248] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 38.115078] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 38.127331] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.4-00082 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast crc32 f301de65
[ 40.408722] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:2 crc32 751efba1
[ 46.257530] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 46.341662] ath: EEPROM regdomain: 0x0
[ 46.341667] ath: EEPROM indicates default country code should be used
[ 46.341670] ath: doing EEPROM country->regdmn map search
[ 46.341677] ath: country maps to regdmn code: 0x3a
[ 46.341683] ath: Country alpha2 being used: US
[ 46.341687] ath: Regpair used: 0x3a
[ 46.351066] u32 classifier
[ 46.351087] input device check on
[ 46.352656] Actions configured
[ 46.357335] Mirror/redirect action on
[ 46.370629] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 46.375796] fuse init (API version 7.26)
[ 46.383134] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 46.429393] ctnetlink v0.93: registering with nfnetlink.
[ 46.476064] usbcore: registered new interface driver ums-alauda
[ 46.476759] usbcore: registered new interface driver ums-cypress
[ 46.481722] usbcore: registered new interface driver ums-datafab
[ 46.488165] usbcore: registered new interface driver ums-freecom
[ 46.494332] usbcore: registered new interface driver ums-isd200
[ 46.499784] usbcore: registered new interface driver ums-jumpshot
[ 46.505436] usbcore: registered new interface driver ums-karma
[ 46.512067] usbcore: registered new interface driver ums-sddr09
[ 46.518373] usbcore: registered new interface driver ums-sddr55
[ 46.524091] usbcore: registered new interface driver ums-usbat
[ 46.528961] usbcore: registered new interface driver usblp
[ 46.547904] xt_time: kernel timezone is -0000
[ 46.548575] usbcore: registered new interface driver cdc_ether
[ 46.552058] fast-classifier: starting up
[ 46.557024] fast-classifier: registered
[ 46.565562] PPP generic driver version 2.4.2
[ 46.566012] PPP MPPE Compression module registered
[ 46.569683] NET: Registered protocol family 24
[ 46.574474] usbcore: registered new interface driver rndis_host
[ 46.579081] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 70.806321] blk_update_request: 10 callbacks suppressed
[ 70.806325] blk_update_request: I/O error, dev mtdblock0, sector 0
[ 70.811000] blk_update_request: I/O error, dev mtdblock0, sector 8
[ 70.817095] blk_update_request: I/O error, dev mtdblock0, sector 16
[ 70.823318] blk_update_request: I/O error, dev mtdblock0, sector 24
[ 70.829656] blk_update_request: I/O error, dev mtdblock0, sector 0
[ 70.835177] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 70.842168] blk_update_request: I/O error, dev mtdblock1, sector 0
[ 70.849130] blk_update_request: I/O error, dev mtdblock1, sector 8
[ 70.855450] blk_update_request: I/O error, dev mtdblock1, sector 16
[ 70.861615] blk_update_request: I/O error, dev mtdblock1, sector 24
[ 70.867753] blk_update_request: I/O error, dev mtdblock1, sector 0
[ 70.873456] Buffer I/O error on dev mtdblock1, logical block 0, async page read
[ 71.109163] dwmac1000: Master AXI performs any burst length
[ 71.109201] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 71.113722] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 71.122693] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 71.135034] br-lan: port 1(eth1.1) entered blocking state
[ 71.135333] br-lan: port 1(eth1.1) entered disabled state
[ 71.141206] device eth1.1 entered promiscuous mode
[ 71.146171] device eth1 entered promiscuous mode
[ 71.154667] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 71.180403] dwmac1000: Master AXI performs any burst length
[ 71.180456] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 71.184945] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[ 71.194069] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 71.207582] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[ 72.169676] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 72.260515] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 78.271195] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 78.271814] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 78.276500] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[ 78.282594] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 78.290670] br-lan: port 1(eth1.1) entered blocking state
[ 78.294874] br-lan: port 1(eth1.1) entered forwarding state
[ 78.300928] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 78.322443] br-lan: port 2(wlan0) entered blocking state
[ 78.322495] br-lan: port 2(wlan0) entered disabled state
[ 78.327520] device wlan0 entered promiscuous mode
[ 84.474140] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 84.761700] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 84.761983] br-lan: port 2(wlan0) entered blocking state
[ 84.767146] br-lan: port 2(wlan0) entered forwarding state
[ 84.774064] br-lan: port 3(wlan1) entered blocking state
[ 84.777760] br-lan: port 3(wlan1) entered disabled state
[ 84.784067] device wlan1 entered promiscuous mode
[ 85.158555] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 85.158841] br-lan: port 3(wlan1) entered blocking state
[ 85.164155] br-lan: port 3(wlan1) entered forwarding state
[ 170.269675] br-lan: port 3(wlan1) entered disabled state
[ 170.269734] br-lan: port 2(wlan0) entered disabled state
[ 170.274077] br-lan: port 1(eth1.1) entered disabled state
[ 170.295516] device eth1.1 left promiscuous mode
[ 170.295537] device eth1 left promiscuous mode
[ 170.298923] br-lan: port 1(eth1.1) entered disabled state
[ 170.310654] IPv6: ADDRCONF(NETDEV_UP): eth1.1: link is not ready
[ 170.377566] device wlan0 left promiscuous mode
[ 170.377638] br-lan: port 2(wlan0) entered disabled state
[ 170.381330] device wlan1 left promiscuous mode
[ 170.386405] br-lan: port 3(wlan1) entered disabled state
[ 170.444242] dwmac1000: Master AXI performs any burst length
[ 170.444286] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 170.448736] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 170.457832] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 170.469372] br-lan: port 1(eth1.1) entered blocking state
[ 170.470474] br-lan: port 1(eth1.1) entered disabled state
[ 170.476648] device eth1.1 entered promiscuous mode
[ 170.481349] device eth1 entered promiscuous mode
[ 170.487824] br-lan: port 2(wlan0) entered blocking state
[ 170.490796] br-lan: port 2(wlan0) entered disabled state
[ 170.496368] device wlan0 entered promiscuous mode
[ 170.503454] br-lan: port 3(wlan1) entered blocking state
[ 170.505912] br-lan: port 3(wlan1) entered disabled state
[ 170.511656] device wlan1 entered promiscuous mode
[ 170.519787] br-lan: port 3(wlan1) entered blocking state
[ 170.521187] br-lan: port 3(wlan1) entered forwarding state
[ 170.526604] br-lan: port 2(wlan0) entered blocking state
[ 170.531934] br-lan: port 2(wlan0) entered forwarding state
[ 171.529684] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 171.529735] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 171.538853] br-lan: port 1(eth1.1) entered blocking state
[ 171.543729] br-lan: port 1(eth1.1) entered forwarding state
[ 370.939825] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 371.119435] usb-storage 3-1:1.1: USB Mass Storage device detected
[ 371.120536] scsi host1: usb-storage 3-1:1.1
[ 403.385391] usb 3-1: USB disconnect, device number 2
[ 403.878219] usb 3-1: new high-speed USB device number 3 using xhci-hcd
[ 404.065846] rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-xhci-hcd.1.auto-1, RNDIS device, 06:eb:ea:87:ac:a9
root@LEDE:~# ifconfig -a
br-lan Link encap:Ethernet HWaddr B0:39:56:94:04:77
inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fd3d:2f92:c919::1/60 Scope:Global
inet6 addr: fe80::b239:56ff:fe94:477/64 Scope ink
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:10622 errors:0 dropped:0 overruns:0 frame:0
TX packets:10820 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1177482 (1.1 MiB) TX bytes:4635994 (4.4 MiB)
eth0 Link encap:Ethernet HWaddr B0:39:56:94:04:78
inet6 addr: fe80::b239:56ff:fe94:478/64 Scopeink
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5138 errors:0 dropped:0 overruns:0 frame:0
TX packets:4295 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3914780 (3.7 MiB) TX bytes:711293 (694.6 KiB)
Interrupt:100
eth0.2 Link encap:Ethernet HWaddr B0:39:56:94:04:78
inet addr:192.168.1.183 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::b239:56ff:fe94:478/64 Scopeink
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3343 errors:0 dropped:0 overruns:0 frame:0
TX packets:4283 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3743824 (3.5 MiB) TX bytes:692961 (676.7 KiB)
eth1 Link encap:Ethernet HWaddr B0:39:56:94:04:77
inet6 addr: fe80::b239:56ff:fe94:477/64 Scopeink
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:11703 errors:0 dropped:0 overruns:0 frame:0
TX packets:11610 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1496427 (1.4 MiB) TX bytes:4954991 (4.7 MiB)
Interrupt:101
eth1.1 Link encap:Ethernet HWaddr B0:39:56:94:04:77
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:10622 errors:0 dropped:0 overruns:0 frame:0
TX packets:10815 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1177482 (1.1 MiB) TX bytes:4635448 (4.4 MiB)
gre0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
NOARP MTU:1476 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
gretap0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1462 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
ifb0 Link encap:Ethernet HWaddr 3A:36:84:44 0:1A
BROADCAST NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
ifb1 Link encap:Ethernet HWaddr 42:B6:AD:80:19:F7
BROADCAST NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encapocal Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:4054 errors:0 dropped:0 overruns:0 frame:0
TX packets:4054 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:292515 (285.6 KiB) TX bytes:292515 (285.6 KiB)
usb0 Link encap:Ethernet HWaddr 06:EB:EA:87:AC:A9
inet addr:192.168.42.221 Bcast:192.168.42.255 Mask:255.255.255.0
inet6 addr: fe80::4eb:eaff:fe87:aca9/64 Scopeink
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:195 errors:0 dropped:0 overruns:0 frame:0
TX packets:238 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:23262 (22.7 KiB) TX bytes:32750 (31.9 KiB)
wlan0 Link encap:Ethernet HWaddr B0:39:56:94:04:79
inet6 addr: fe80::b239:56ff:fe94:479/64 Scopeink
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:824 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:100824 (98.4 KiB)
wlan1 Link encap:Ethernet HWaddr B0:39:56:94:04:7A
inet6 addr: fe80::b239:56ff:fe94:47a/64 Scopeink
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:823 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:100464 (98.1 KiB)
|
|
简体中文
繁體中文
English
日本語
Deutsch
한국 사람
بالعربية
TÜRKÇE
português
คนไทย
IP卡
狗仔卡
置顶卡
沉默卡
喧嚣卡
顶贴卡
显身卡
