有谁能说下SmartDNS配置 没有面板那种？

daha***

我用梅林 或者 armbian 安装了 SmartDNS


问题是 教程中 没说 怎么修改smartdns.conf

请问如何配置这个文件 在哪填上游DNS 怎么屏蔽广告 哪位好心人给一份demo 看看
这玩意也没有中文注释 ！

附上内容

# dns server name, defaut is host name
# server-name,
# example:
#   server-name smartdns
#
119.29.29.29 alidns
233.5.5.5   alidns
114.114.114.114 114DNS

# Include another configuration options
# conf-file [file]
# conf-file blacklist-ip.conf

# dns server bind ip and port, default dns server port is 53, support binding multi ip and port
# bind udp server
#   bind [IP]:[port] [-group [group]] [-no-rule-addr] [-no-rule-nameserver] [-no-rule-ipset] [-no-speed-check] [-no-cache] [-no-rule-soa] [-no-dualstack-selection]
# bind tcp server
#   bind-tcp [IP]:[port] [-group [group]] [-no-rule-addr] [-no-rule-nameserver] [-no-rule-ipset] [-no-speed-check] [-no-cache] [-no-rule-soa] [-no-dualstack-selection]
# option:
#   -group: set domain request to use the appropriate server group.
#   -no-rule-addr: skip address rule.
#   -no-rule-nameserver: skip nameserver rule.
#   -no-rule-ipset: skip ipset rule.
#   -no-speed-check: do not check speed.
#   -no-cache: skip cache.
#   -no-rule-soa: Skip address SOA(#) rules.
#   -no-dualstack-selection: Disable dualstack ip selection.
# example:
#  IPV4:
#    bind :53
#    bind :6053 -group office -no-speed-check
#  IPV6:
#    bind [::]:53
#    bind-tcp [::]:53
bind [::]:53

# tcp connection idle timeout
# tcp-idle-time [second]

# dns cache size
# cache-size [number]
#   0: for no cache
cache-size 512

# prefetch domain
# prefetch-domain [yes|no]
# prefetch-domain yes

# List of hosts that supply bogus NX domain results
# bogus-nxdomain [ip/subnet]

# List of IPs that will be filtered when nameserver is configured -blacklist-ip parameter
# blacklist-ip [ip/subnet]

# List of IPs that will be accepted when nameserver is configured -whitelist-ip parameter
# whitelist-ip [ip/subnet]

# List of IPs that will be ignored
# ignore-ip [ip/subnet]

# speed check mode
# speed-check-mode [ping|tcp:port|none|,]
# example:
#   speed-check-mode ping,tcp:80
#   speed-check-mode tcp:443,ping
#   speed-check-mode none

# force AAAA query return SOA
# force-AAAA-SOA [yes|no]

# Enable IPV4, IPV6 dual stack IP optimization selection strategy
# dualstack-ip-selection-threshold [num] (0~1000)
# dualstack-ip-selection [yes|no]
# dualstack-ip-selection yes

# edns client subnet
# edns-client-subnet [ip/subnet]
# edns-client-subnet 192.168.1.1/24
# edns-client-subnet [8::8]/56

# ttl for all resource record
# rr-ttl: ttl for all record
# rr-ttl-min: minimum ttl for resource record
# rr-ttl-max: maximum ttl for resource record
# example:
# rr-ttl 300
# rr-ttl-min 60
# rr-ttl-max 86400

# set log level
# log-level: [level], level=fatal, error, warn, notice, info, debug
# log-file: file path of log file.
# log-size: size of each log file, support k,m,g
# log-num: number of logs
log-level info
# log-file /opt/var/log/smartdns.log
# log-size 128k
# log-num 2

# dns audit
# audit-enable [yes|no]: enable or disable audit.
# audit-enable yes
# audit-SOA [yes|no]: enable or disalbe log soa result.
# audit-size size of each audit file, support k,m,g
# audit-file /opt/var/log/smartdns-audit.log
# audit-size 128k
# audit-num 2

# remote udp dns server list
# server [IP]:[PORT] [-blacklist-ip] [-whitelist-ip] [-check-edns] [-group [group] ...] [-exclude-default-group]
# default port is 53
#   -blacklist-ip: filter result with blacklist ip
#   -whitelist-ip: filter result whth whitelist ip,  result in whitelist-ip will be accepted.
#   -check-edns: result must exist edns RR, or discard result.
#   -group [group]: set server to group, use with nameserver /domain/group.
#   -exclude-default-group: exclude this server from default group.
# server 8.8.8.8 -blacklist-ip -check-edns -group g1 -group g2

# remote tcp dns server list
# server-tcp [IP]:[PORT] [-blacklist-ip] [-whitelist-ip] [-group [group] ...] [-exclude-default-group]
# default port is 53
# server-tcp 8.8.8.8

# remote tls dns server list
# server-tls [IP]:[PORT] [-blacklist-ip] [-whitelist-ip] [-spki-pin [sha256-pin]] [-group [group] ...] [-exclude-default-group]
#   -spki-pin: TLS spki pin to verify.
#   -tls-host-check: cert hostname to verify.
#   -hostname: TLS sni hostname.
# Get SPKI with this command:
#    echo | openssl s_client -connect '[ip]:853' | openssl x509 -pubkey -noout | openssl pkey -pubin -outform der | openssl dgst -sha256 -binary | openssl enc -base64
# default port is 853
# server-tls 8.8.8.8
# server-tls 1.0.0.1

# remote https dns server list
# server-https https://[host]:[port]/path [-blacklist-ip] [-whitelist-ip] [-spki-pin [sha256-pin]] [-group [group] ...] [-exclude-default-group]
#   -spki-pin: TLS spki pin to verify.
#   -tls-host-check: cert hostname to verify.
#   -hostname: TLS sni hostname.
#   -http-host: http host.
# default port is 443
# server-https https://cloudflare-dns.com/dns-query

# specific nameserver to domain
# nameserver /domain/[group|-]
# nameserver /www.example.com/office, Set the domain name to use the appropriate server group.
# nameserver /www.example.com/-, ignore this domain

# specific address to domain
# address /domain/[ip|-|-4|-6|#|#4|#6]
# address /www.example.com/1.2.3.4, return ip 1.2.3.4 to client
# address /www.example.com/-, ignore address, query from upstream, suffix 4, for ipv4, 6 for ipv6, none for all
# address /www.example.com/#, return SOA to client, suffix 4, for ipv4, 6 for ipv6, none for all

# enable ipset timeout by ttl feature
# ipset-timeout [yes]

# specific ipset to domain
# ipset /domain/[ipset|-]
# ipset /www.example.com/block, set ipset with ipset name of block
# ipset /www.example.com/-, ignore this domain

lai***

到官网去看看说明吧

daha***

laimama 发表于 2020-2-8 10:22
到官网去看看说明吧

就是没说具体怎么配置啊

WRO***

github上readme很清楚啊写的