请问pandorabox如何开启full cone nat

shinin***

本人小白，查到资料如下
http://www.joewein.net/info/sw-iptables-full-cone-nat.htm

Solution:
On the netfilter mailinglist, Pedro Gonçalves suggested the following: Using iptables, I set all policies to "ACCEPT" and I was able to setup two kinds of NAT:
(192.168.2.170 is my "public" address and 10.0.0.1 is my "private" address

/-"Full Cone NAT", with the following rules:/
iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to-source 192.168.2.170
iptables -t nat -A PREROUTING -i eth0 -j DNAT --to-destination 10.0.0.1

可是在luci中应该怎么配置？

luc***

试试 网络--防火墙--自定义规则 里面添加。

008***

防火墙 --- Netfilter  ----NAT 类型 (仅UDP)