|
今天终于搞定,原来是NVRAM清除的问题,我的方法是这样的:
1) After doing the full factory reset of your original Linksys firmware, go to this "secret" webpage and make sure both are set to Disable. Click Apply and then Go Home. Otherwise, you'll get that stupid "You cannot downgrade the firmware" error. BTW, there is no need to rename .bin to .trx, as other pages suggested in the past. Flashing the .bin file worked just fine for me.
http://192.168.1.245/fw-conf.asp
2) After flashing with DD-WRT micro generic, the reset button no longer worked. I was able to do a factory reset from the web interface, and that seemed to work just as well.
3) Your MAC address will get corrupted after doing the upgrade. It will get changed to 00-90-4C-60-04-01. You can keep this if you want, but since I had 2 WAP54G's on my network, they needed to be different. So, I "cloned" the MAC address back to what I had originally!
4) On WAP54G, the LAN and wireless ports seem to be the same thing, and the WAN port does not exist. Changing the MAC address of the LAN also affects the wireless, and vice versa!
5) Since there's no WAN port, set WAN to disabled and firewall to off, and disable other stuff you can find that uses the WAN. Turn off DHCP server, set gateway to Router instead, disable routing, and so forth. This will also free up some memory, which will help your stability.
I also installed DD-WRT standard generic edition on a sweet WRT54G v4 that was up at my parent's house. Gave them some more range, and got my Dad interested in wireless stuff, by watching the live signal bars go back and forth. Now my Dad's moving the laptop around and trying to find the strongest spot that is still convenient
我先刷了3.04的官方firmware,然后AP自动重启一次,再自动重启1次,然后断电10秒钟;
然后刷V23sp1,这个是final版本,刷了之后居然可以清除NVRAM,爽!别急,来一个软reset,AP的reset已经不能用了,翻了整个地球的DD-WRT论坛都认为这个micro的版本没有问题,而是WAP54Gv2的硬件设计问题,不管了!
然后我再刷V23SP2。搞定。 |
|