k3c固件ISDK测试版20190419/救砖/降级/伪AP模式/多拨

paldier

目录
1.固件
2.刷机方法
3.软件
4.救砖
5.功率
6.伪AP模式
7.其他


适用硬件版本：B1\B1G\C1\S1，不支持：B2\A1

多nand切换板 https://www.right.com.cn/forum/thread-328462-1-1.html


启动需要180-300秒

感谢jbzzz一直以来的测试

集成
访客网络 upnp DDNS 乳酸菌饮料
frp adbyby aria2ng aria2 minidlna kms samba transmission luci（不完全）定时重启 pcap-dnsproxy webshell 多拨及负载均衡 3/4G无线上网 中继

支持-手动安装
CWMP amule aliddns dogcom webui-aria2 yaaw vim 网络唤醒 mentohust brook Ngrok 迅雷








--------------------------------固件------------------------------------------


uboot分为256/512内存版本

固件
http://k3c.paldier.com/bin/
http://pan.baidu.com/s/1i5vJA9B

93/113官版及国*版K3CA1
https://pan.baidu.com/s/1kUVXm0B

软件包
http://k3c.paldier.com/packages/

uboot
https://www.right.com.cn/forum/thread-266825-1-1.html

部分源代码来自https://github.com/coolsnowwolf/lede
https://github.com/paldier/K3C 部分源代码

！！！！luci仅为方便管理自己安装的软件，在此修改系统配置后果自负！！！！
刷完必须恢复一次出厂    捅菊花3秒重启，10秒重置
账号
root password  
admin password
20180607及之后版本可以使用http://router.k3c.net访问

20190419
更新插件，需要芝麻开门

20190220
更新插件，需要芝麻开门

20181225
修复在线更新链接
更新插件

20180708
添加禁用dhcpv6支持
修复伪ap模式无法禁用dhcpv6的问题
固件内置eeprom防止手残擦掉后无法启动
更新iwinfo

20180623
更新乳酸菌饮料添加酸酸模式
强制使用3天线

20180607
修复某些奇葩设备无法连接k3c的问题
添加路由域名router.k3c.net
更新快鸟
添加分区切换插件
修复一些插件

20180528
修复一些问题

20180524
更新斐讯最新版无线校准信息
添加在线更新固件

20180513
修改硬nat兼容爱国和去广告
修正同时开启爱国和去广告的兼容性
修复爱国的2种解析方式
彻底解决掉wifi的问题
修改默认wifi密码为空
修复第一次启动wifi功率异常（官版和isdk第一次启动功率会使用17和28这两个错误的设置）

20180503
修复脚本错误
添加更多汉化

20180428
修复证书日期问题
修复全部led

20180321
修复功率到30dBm，需要手动保存一次设置
修复功率设置不能保存

20180317
更新快鸟
添加brook
添加frp
移除Ngrok
尝试解决dns解析过慢的问题


20180202
强x驱动调整wifi顺序
修复中继（client和wds）
刷完必须恢复出厂

20180121
添加汉化

20180113
固件分为256/512内存版本
uboot分为256/512内存版本

20180106
更新tuxera使用梅林ugw-7.2版本
修复菜单汉化
参考蓝洞修改部分wifi启动脚本
参考蓝洞修改部分miniupnpd启动脚本

20171231
英文版，升级后必须恢复出厂
内核升级到3.10.104
添加访客网络
添加无线中继
添加WPS
添加upnp
添加黑白名单
添加USB安全移除
添加静态路由
添加DDNS
添加RIP路由
添加Hotspot？这东西和AP有什么区别
添加Ngrok
添加pcap-dnsproxy
添加webshell
支持4G无线上网卡-手动安装
支持多拨及负载均衡-手动安装
支持CWMP/TR-069-手动安装
支持网络唤醒-手动安装
修改lan框架支持指定dns端口
配置方法见/opt/lantiq/etc/dnsmasqdf.conf和/opt/lantiq/etc/resolv.conf
修复乳酸菌饮料
修复快捷菜单不显示5G
ddns添加3322 noip heipv6tb

--------------------------------------刷机方法-------------------------------------
开telnet方法
https://www.right.com.cn/forum/thread-318971-1-1.html
在线安装ssh

1.     opkg install http://k3c.paldier.com/packages/dropbear_2015.67-1_lantiq.ipk

复制代码

1. 256内存/512内存
   
2. 把rootfs.img uImage_bootcore和uImage上传到/tmp目录
   
3. /usr/sbin/upgrade /tmp/rootfs.img rootfs 0 1
   
4. /usr/sbin/upgrade /tmp/uImage_bootcore bootcore 0 1
   
5. /usr/sbin/upgrade /tmp/uImage kernel 1 1
   
6. rm -rf /overlay/*
   
7. sync
   
8. 等10秒重启
   
9. 默认ip192.168.1.1
   
10. root password
    
11. admin password
    
12. 
    
13. 
    
14. 
    
15. 刷回原厂的方法1
    
16. 
    
17. ssh里执行
    
18. wget http://iytc.net/tools/k3c_v12.sh -O - |sh
    
19. 官改没有给清除配置的机会，重启后，红灯变黄灯后捅菊花恢复出厂，之后在web里上传固件就可以回官方也可以直接用官改
    
20. （uboot版本要和固件对应否则容易砖，比如175要对应175或113，268就！只能！对应268，鉴于大部分人不知道自己uboot版本，放弃uboot方法）
    
21. 
    
22. 
    
23. 刷回原厂的方法2
    
24. mtd write kernelA.bin kernelA
    
25. mtd write kernelB.bin kernelB
    
26. mtd write rootfsA.bin rootfsA
    
27. mtd write rootfsB.bin rootfsB
    
28. mtd write bootcoreA.bin bootcoreA
    
29. mtd write bootcoreB.bin bootcoreB
    
30. rm -rf /overlay/*
    
31. sync
    
32. --------------备用-------------------
    
33. 重启后在刷
    
34. mtd write calibration.bin calibration
    
35. ---------------------------------------
    
36. 
    
37. 
    
38. 如有其他情况，2种方法执行完后在刷mtd1-16即可(除data_vol),刷法看最后面的救砖
    
39. 
    
40. 刷前务必备份所有分区 刷前务必备份所有分区 刷前务必备份所有分区 重要的事情说3遍
    
41. 
    

复制代码

-------------------------------------软件---------------------------------
http://pan.baidu.com/s/1i5vJA9B 软件

https://k3c.paldier.com/packages/


20180607
添加双分区启动切换
更新一些软件包版本
添加一些软件包


20180328
添加迅雷
添加tinc
添加zerotier

20180317
添加udp2raw
更新快鸟
20180303
添加brook
更新乳酸菌饮料

20180106
更新快鸟

20180101
更新tuxera使用梅林ugw-7.2版本

20171222
webshell
oscam
frpc
n2n_v2
usb-printer

20171125
transmission-web汉化pt版
更新Aria-Ng到20171123
arpbind
filetransfer

20171121
NFS
openvirtual**
aliddns
asterisk
dogcom
网络唤醒
20171116
修改samba匿名用户为可读写
20171115
更新ip到4.0.0
更新ip-full到4.0.0
更新libpcap到1.7.4
更新iptables到1.4.21-2
更新dropbear到2017.75
更新ipset到6.32
20171113
更新aria2到1.33.0
20171112
修复amule
更新dnsmasq

-----------------------------------关于编程器--------------------------------------------
一般刷入uboot就可以了，但是k3c特殊，如果ubootconfigA和ubootconfigB不为空并且是错误的则无法启动
uboot+ubootconfigA+ubootconfigB+gphyfirmware4个分区全部刷入才行，用winhex合并成一个文件刷入就可以了，理论上用别人的备份然后进uboot用phi_fac -s MAC改成自己的也行，calibration是无线要用的，看起来所有k3c都是相同的，最好是一起刷入，当然也可以启动后刷入备份，后面可以按最下面的刷uboot操作了


-----------------------------------------------救砖-----------------------------------------

救砖必须接TTL，以下操作全部为TTL操作
！！！注意注意，不看的救砖后依然还会是砖

以下教程为268及以上固件方案，无175固件方案

isdk下载地址，推荐使用最新版本

1. http://k3c.paldier.com/bin

复制代码

普通砖

1. 仅固件问题，比如刷错后无法启动，不含坏块/system_sw分区损坏/官改砖
   
2. 
   
3. 进uboot
   
4. 设置好网卡ip 192.168.2.100开好tftp32并且放置好 fullimage.img uImage_bootcore uImage gphy_firmware 4个文件 见上面固件下载
   
5. 开机按两下键盘
   
6. 出现GRX500>就可以继续下面操作
   
7. 必须等待完成才能运行下条命令！！！！
   
8. run update_fullimage
   
9. run update_bootcore
   
10. run update_gphyfirmware
    
11. 
    
12. 重启后用mtd刷原厂备份mtd1-16除data_vol即可恢复出厂状态，注意顺序，带AB的后刷bootcoreA/B最后刷（不含mtd8）
    
13. 最后一定要执行这两条命令后在重启
    
14. rm -rf /overlay/*
    
15. sync
    
16. 
    
17. 顺便提醒，牙膏厂拒绝broadcom网卡，乖乖换其他家的吧
    

复制代码

坏块砖/
提示出现坏块或者一直报ecc错误的/system_sw损坏的可以尝试这个方法

1. 执行此命令后继续按普通砖教程刷
   
2. nand scrub 1340000 06c00000
   

复制代码

第一例成功案例可以看504楼505楼506楼 感谢@独爱你一人的测试


官改砖
268已无此砖


---------------------------------------降级-----------------------------------------
出厂175/268的为新版uboot，已加密，降级必砖，但可以开telnet
https://www.right.com.cn/forum/thread-318971-1-1.html


---------------------------------------功率-----------------------------------------

功率计算概率论概率论概率论公式
发射总能量＝发射功率（ dBm ）＋天线增益（ dBi ）
    10    W        的无线发射功率为  40 dBm
    6.4   W        的无线发射功率为  38 dBm
    3.2   W        的无线发射功率为  35 dBm
    1.6   W        的无线发射功率为  32 dBm   
    1000  mW  的无线发射功率为  30 dBm
    800   mW   的无线发射功率为  29 dBm
    400   mW   的无线发射功率为  26 dBm
    200   mW   的无线发射功率为  23 dBm
    100   mW   的无线发射功率为  20 dBm
    50    mW    的无线发射功率为  17 dBm
    25    mW    的无线发射功率为  14 dBm
    12.5  mW  的无线发射功率为  11 dBm
    10.34 mW 的无线发射功率为  10 dBm
    8.26  mW  的无线发射功率为  9  dBm
    6.25  mW  的无线发射功率为  8  dBm
    3.125 mW 的无线发射功率为  5  dBm
    1     mW     的无线发射功率为  0  dBm


---------------------------------------伪AP和4LAN口模式---------------------------------------
配置如下
新建一个桥接到br-lan
原来的设定ip和网关或者选择dhcp模式
必须插wan口
并把局域网的dhcp关掉，ip不可以和上级在同网段
设置完即为伪ap模式和4个lan口
通过wan口ip访问k3c
如图





在系统里查看及设置ubootconfig的方法，传送门

--------------------------------------------多拨教程----------------------------------------
xiaoboy的多拨教程

https://www.right.com.cn/forum/thread-267421-2-1.html






下个版本使用4.9内核，必须使用梅林连接板，暂时只开放ac驱动

paldier

1. envcrc.c: In function 'main':
   
2. envcrc.c:144:9: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
   
3. int ret;
   
4. ^
   
5. envcrc.c:143:15: warning: unused variable 'eoe' [-Wunused-variable]
   
6. unsigned int eoe;
   
7. ^
   
8. envcrc.c:141:15: warning: unused variable 'datasize' [-Wunused-variable]
   
9. unsigned int datasize = ENV_SIZE;
   
10. ^
    
11. envcrc.c:139:20: warning: unused variable 'envptr' [-Wunused-variable]
    
12. unsigned char *envptr = NULL;
    
13. ^
    
14. envcrc.c:137:19: warning: unused variable 'pad' [-Wunused-variable]
    
15. unsigned char pad = 0x00;
    
16. ^
    
17. gcc -g -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include2 -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/libfdt -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/tools -DTEXT_BASE=0xA0400000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -pedantic -c -o sha1.o /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/sha1.c
    
18. gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include2 -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/libfdt -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/tools -DTEXT_BASE=0xA0400000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -pedantic -o envcrc crc32.o env_embedded.o envcrc.o sha1.o
    
19. gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include2 -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/libfdt -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/tools -DTEXT_BASE=0xA0400000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -pedantic -o gen_eth_addr.o gen_eth_addr.c -c
    
20. gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include2 -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/libfdt -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/tools -DTEXT_BASE=0xA0400000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -pedantic -o gen_eth_addr gen_eth_addr.o
    
21. strip gen_eth_addr
    
22. gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include2 -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/libfdt -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/tools -DTEXT_BASE=0xA0400000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -o default_image.o default_image.c -c
    
23. gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include2 -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/libfdt -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/tools -DTEXT_BASE=0xA0400000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -o fit_image.o fit_image.c -c
    
24. gcc -g -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include2 -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/libfdt -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/tools -DTEXT_BASE=0xA0400000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -c -o image.o /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/common/image.c
    
25. gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include2 -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/libfdt -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/tools -DTEXT_BASE=0xA0400000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -o imximage.o imximage.c -c
    
26. gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include2 -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/libfdt -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/tools -DTEXT_BASE=0xA0400000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -o kwbimage.o kwbimage.c -c
    
27. kwbimage.c: In function 'kwbimage_verify_header':
    
28. kwbimage.c:350:10: warning: variable 'calc_exthdrcsum' set but not used [-Wunused-but-set-variable]
    
29. uint8_t calc_exthdrcsum;
    
30. ^
    
31. gcc -g -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include2 -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/libfdt -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/tools -DTEXT_BASE=0xA0400000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -pedantic -c -o md5.o /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/md5.c
    
32. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/md5.c: In function 'MD5Final':
    
33. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/md5.c:156:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
    
34. ((__u32 *) ctx->in)[14] = ctx->bits[0];
    
35. ^
    
36. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/md5.c:157:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
    
37. ((__u32 *) ctx->in)[15] = ctx->bits[1];
    
38. ^
    
39. gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include2 -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/libfdt -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/tools -DTEXT_BASE=0xA0400000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -o mkimage.o mkimage.c -c
    
40. gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include2 -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/libfdt -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/tools -DTEXT_BASE=0xA0400000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -o os_support.o os_support.c -c
    
41. gcc -g -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include2 -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/libfdt -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/tools -DTEXT_BASE=0xA0400000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -c -o fdt.o /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/libfdt/fdt.c
    
42. gcc -g -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include2 -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/libfdt -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/tools -DTEXT_BASE=0xA0400000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -c -o fdt_ro.o /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/libfdt/fdt_ro.c
    
43. gcc -g -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include2 -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/libfdt -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/tools -DTEXT_BASE=0xA0400000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -c -o fdt_rw.o /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/libfdt/fdt_rw.c
    
44. gcc -g -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include2 -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/libfdt -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/tools -DTEXT_BASE=0xA0400000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -c -o fdt_strerror.o /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/libfdt/fdt_strerror.c
    
45. gcc -g -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include2 -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/libfdt -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/tools -DTEXT_BASE=0xA0400000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -c -o fdt_wip.o /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/libfdt/fdt_wip.c
    
46. gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include2 -idirafter /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/libfdt -I /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/tools -DTEXT_BASE=0xA0400000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -pedantic -o mkimage crc32.o default_image.o fit_image.o image.o imximage.o kwbimage.o md5.o mkimage.o os_support.o sha1.o fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_wip.o
    
47. strip mkimage
    
48. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/tools'
    
49. make -C examples/standalone all
    
50. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/examples/standalone'
    
51. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
    
52. -o hello_world.o hello_world.c -c
    
53. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
    
54. -o stubs.o stubs.c -c
    
55. mips-openwrt-linux-uclibc-ar crv libstubs.a stubs.o
    
56. a - stubs.o
    
57. mips-openwrt-linux-uclibc-ld -g -Ttext 0x80200000 -T mips.lds -G 0 -static -n -nostdlib \
    
58. -o hello_world -e hello_world hello_world.o libstubs.a \
    
59. -L/home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3 -lgcc
    
60. mips-openwrt-linux-uclibc-objcopy -O srec hello_world hello_world.srec 2>/dev/null
    
61. mips-openwrt-linux-uclibc-objcopy -O binary hello_world hello_world.bin 2>/dev/null
    
62. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/examples/standalone'
    
63. make -C examples/api all
    
64. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/examples/api'
    
65. make[5]: Nothing to be done for `all'.
    
66. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/examples/api'
    
67. make -C arch/mips/cpu start.o
    
68. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/arch/mips/cpu'
    
69. mips-openwrt-linux-uclibc-gcc -D__ASSEMBLY__ -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d \
    
70. -o start.o start.S -c
    
71. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/arch/mips/cpu'
    
72. make -C lib/
    
73. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib'
    
74. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib'
    
75. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib'
    
76. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
    
77. -o bch.o bch.c -c
    
78. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
    
79. -o crc16.o crc16.c -c
    
80. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
    
81. -o crc32.o crc32.c -c
    
82. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
    
83. -o ctype.o ctype.c -c
    
84. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
    
85. -o display_options.o display_options.c -c
    
86. In file included from display_options.c:26:0:
    
87. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/ctype.h:18:15: warning: array '_ctype' assumed to have one element [enabled by default]
    
88. unsigned char _ctype[];
    
89. ^
    
90. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
    
91. -o div64.o div64.c -c
    
92. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
    
93. -o gunzip.o gunzip.c -c
    
94. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
    
95. -o ldiv.o ldiv.c -c
    
96. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
    
97. -o net_utils.o net_utils.c -c
    
98. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
    
99. -o string.o string.c -c
    
100. In file included from string.c:20:0:
     
101. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/ctype.h:18:15: warning: array '_ctype' assumed to have one element [enabled by default]
     
102. unsigned char _ctype[];
     
103. ^
     
104. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
105. -o strmhz.o strmhz.c -c
     
106. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
107. -o time.o time.c -c
     
108. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
109. -o vsprintf.o vsprintf.c -c
     
110. In file included from vsprintf.c:15:0:
     
111. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/ctype.h:18:15: warning: array '_ctype' assumed to have one element [enabled by default]
     
112. unsigned char _ctype[];
     
113. ^
     
114. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
115. -o zlib.o zlib.c -c
     
116. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
117. -o rbtree.o rbtree.c -c
     
118. mips-openwrt-linux-uclibc-ar crv libgeneric.a bch.o crc16.o crc32.o ctype.o display_options.o div64.o gunzip.o ldiv.o net_utils.o string.o strmhz.o time.o vsprintf.o zlib.o rbtree.o
     
119. a - bch.o
     
120. a - crc16.o
     
121. a - crc32.o
     
122. a - ctype.o
     
123. a - display_options.o
     
124. a - div64.o
     
125. a - gunzip.o
     
126. a - ldiv.o
     
127. a - net_utils.o
     
128. a - string.o
     
129. a - strmhz.o
     
130. a - time.o
     
131. a - vsprintf.o
     
132. a - zlib.o
     
133. a - rbtree.o
     
134. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib'
     
135. make -C lib/lzma/
     
136. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/lzma'
     
137. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/lzma'
     
138. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/lzma'
     
139. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector -D_LZMA_PROB32 \
     
140. -o LzmaDec.o LzmaDec.c -c
     
141. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector -D_LZMA_PROB32 \
     
142. -o LzmaTools.o LzmaTools.c -c
     
143. mips-openwrt-linux-uclibc-ar crv liblzma.a LzmaDec.o LzmaTools.o
     
144. a - LzmaDec.o
     
145. a - LzmaTools.o
     
146. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/lzma'
     
147. make -C lib/lzo/
     
148. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/lzo'
     
149. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/lzo'
     
150. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/lzo'
     
151. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
152. -o lzo1x_decompress.o lzo1x_decompress.c -c
     
153. lzo1x_decompress.c: In function 'parse_header':
     
154. lzo1x_decompress.c:35:5: warning: variable 'level' set but not used [-Wunused-but-set-variable]
     
155. u8 level = 0;
     
156. ^
     
157. mips-openwrt-linux-uclibc-ar crv liblzo.a lzo1x_decompress.o
     
158. a - lzo1x_decompress.o
     
159. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/lib/lzo'
     
160. make -C arch/mips/cpu/grx500/
     
161. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/arch/mips/cpu/grx500'
     
162. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/arch/mips/cpu/grx500'
     
163. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/arch/mips/cpu/grx500'
     
164. mips-openwrt-linux-uclibc-gcc -D__ASSEMBLY__ -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d \
     
165. -o start.o start.S -c
     
166. mips-openwrt-linux-uclibc-gcc -D__ASSEMBLY__ -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d \
     
167. -o lowlevel_init.o lowlevel_init.S -c
     
168. mips-openwrt-linux-uclibc-gcc -D__ASSEMBLY__ -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d \
     
169. -o init_cache.o init_cache.S -c
     
170. mips-openwrt-linux-uclibc-gcc -D__ASSEMBLY__ -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d \
     
171. -o init_vpe1.o init_vpe1.S -c
     
172. mips-openwrt-linux-uclibc-gcc -D__ASSEMBLY__ -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d \
     
173. -o init_exception.o init_exception.S -c
     
174. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
175. -o cpu.o cpu.c -c
     
176. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
177. -o clock.o clock.c -c
     
178. clock.c:103:14: warning: function declaration isn't a prototype [-Wstrict-prototypes]
     
179. unsigned int get_fpi_clk()
     
180. ^
     
181. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
182. -o interrupts.o interrupts.c -c
     
183. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
184. -o cache.o cache.c -c
     
185. cache.c:42:5: warning: function declaration isn't a prototype [-Wstrict-prototypes]
     
186. u32 get_cpu_id()
     
187. ^
     
188. cache.c:49:5: warning: function declaration isn't a prototype [-Wstrict-prototypes]
     
189. u32 icache_lines()
     
190. ^
     
191. cache.c:62:5: warning: function declaration isn't a prototype [-Wstrict-prototypes]
     
192. u32 icache_line_size()
     
193. ^
     
194. cache.c:71:5: warning: function declaration isn't a prototype [-Wstrict-prototypes]
     
195. u32 dcache_lines()
     
196. ^
     
197. cache.c:84:5: warning: function declaration isn't a prototype [-Wstrict-prototypes]
     
198. u32 dcache_line_size()
     
199. ^
     
200. cache.c:92:5: warning: function declaration isn't a prototype [-Wstrict-prototypes]
     
201. u32 scache_lines()
     
202. ^
     
203. cache.c:126:5: warning: function declaration isn't a prototype [-Wstrict-prototypes]
     
204. u32 scache_linesize()
     
205. ^
     
206. cache.c:151:6: warning: function declaration isn't a prototype [-Wstrict-prototypes]
     
207. void init_icache()
     
208. ^
     
209. cache.c: In function 'init_icache':
     
210. cache.c:156:6: warning: unused variable 'cpu_id' [-Wunused-variable]
     
211. u32 cpu_id = get_cpu_id();
     
212. ^
     
213. cache.c: At top level:
     
214. cache.c:167:6: warning: function declaration isn't a prototype [-Wstrict-prototypes]
     
215. void lock_icache()
     
216. ^
     
217. cache.c: In function 'lock_icache':
     
218. cache.c:172:9: warning: unused variable 'cpu_id' [-Wunused-variable]
     
219. u32 cpu_id = get_cpu_id();
     
220. ^
     
221. cache.c: At top level:
     
222. cache.c:180:6: warning: function declaration isn't a prototype [-Wstrict-prototypes]
     
223. void init_dcache()
     
224. ^
     
225. cache.c: In function 'init_dcache':
     
226. cache.c:185:7: warning: unused variable 'cpu_id' [-Wunused-variable]
     
227. u32 cpu_id = get_cpu_id();
     
228. ^
     
229. cache.c: At top level:
     
230. cache.c:195:6: warning: function declaration isn't a prototype [-Wstrict-prototypes]
     
231. void lock_dcache()
     
232. ^
     
233. cache.c: In function 'lock_dcache':
     
234. cache.c:200:9: warning: unused variable 'cpu_id' [-Wunused-variable]
     
235. u32 cpu_id = get_cpu_id();
     
236. ^
     
237. cache.c: At top level:
     
238. cache.c:208:6: warning: function declaration isn't a prototype [-Wstrict-prototypes]
     
239. void init_scache()
     
240. ^
     
241. cache.c: In function 'write_one_tlb':
     
242. cache.c:309:2: warning: implicit declaration of function 'local_irq_save' [-Wimplicit-function-declaration]
     
243. write_c0_entrylo0(low0);
     
244. ^
     
245. cache.c:309:2: warning: implicit declaration of function 'local_irq_restore' [-Wimplicit-function-declaration]
     
246. {standard input}: Assembler messages:
     
247. {standard input}:59: Warning: the `mt' extension requires MIPS32 revision 2 or greater
     
248. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
249. -o interaptiv.o interaptiv.c -c
     
250. interaptiv.c: In function 'start_interaptiv':
     
251. interaptiv.c:191:8: warning: variable 'i' set but not used [-Wunused-but-set-variable]
     
252. u32 i;
     
253. ^
     
254. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
255. -o ibl.o ibl.c -c
     
256. In file included from ibl.c:4:0:
     
257. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:491:23: warning: backslash and newline separated by space [enabled by default]
     
258. __extension__ ({ \
     
259. ^
     
260. In file included from ibl.c:6:0:
     
261. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:85:0: warning: "MVPCONTROL_EVP" redefined [enabled by default]
     
262. #define MVPCONTROL_EVP (_ULCAST_(1))
     
263. ^
     
264. In file included from ibl.c:4:0:
     
265. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:68:0: note: this is the location of the previous definition
     
266. #define MVPCONTROL_EVP 0x00000001
     
267. ^
     
268. In file included from ibl.c:6:0:
     
269. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:88:0: warning: "MVPCONTROL_VPC" redefined [enabled by default]
     
270. #define MVPCONTROL_VPC (_ULCAST_(1) << MVPCONTROL_VPC_SHIFT)
     
271. ^
     
272. In file included from ibl.c:4:0:
     
273. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:69:0: note: this is the location of the previous definition
     
274. #define MVPCONTROL_VPC 0x00000002
     
275. ^
     
276. In file included from ibl.c:6:0:
     
277. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:91:0: warning: "MVPCONTROL_STLB" redefined [enabled by default]
     
278. #define MVPCONTROL_STLB (_ULCAST_(1) << MVPCONTROL_STLB_SHIFT)
     
279. ^
     
280. In file included from ibl.c:4:0:
     
281. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:70:0: note: this is the location of the previous definition
     
282. #define MVPCONTROL_STLB 0x00000004
     
283. ^
     
284. In file included from ibl.c:6:0:
     
285. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:100:0: warning: "MVPCONF0_PTC" redefined [enabled by default]
     
286. #define MVPCONF0_PTC ( _ULCAST_(0xff))
     
287. ^
     
288. In file included from ibl.c:4:0:
     
289. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:75:0: note: this is the location of the previous definition
     
290. #define MVPCONF0_PTC 0x000000ff
     
291. ^
     
292. In file included from ibl.c:6:0:
     
293. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:102:0: warning: "MVPCONF0_PVPE" redefined [enabled by default]
     
294. #define MVPCONF0_PVPE ( _ULCAST_(0xf) << MVPCONF0_PVPE_SHIFT)
     
295. ^
     
296. In file included from ibl.c:4:0:
     
297. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:77:0: note: this is the location of the previous definition
     
298. #define MVPCONF0_PVPE 0x00003c00
     
299. ^
     
300. In file included from ibl.c:6:0:
     
301. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:104:0: warning: "MVPCONF0_TCA" redefined [enabled by default]
     
302. #define MVPCONF0_TCA ( _ULCAST_(1) << MVPCONF0_TCA_SHIFT)
     
303. ^
     
304. In file included from ibl.c:4:0:
     
305. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:79:0: note: this is the location of the previous definition
     
306. #define MVPCONF0_TCA 0x00008000
     
307. ^
     
308. In file included from ibl.c:6:0:
     
309. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:106:0: warning: "MVPCONF0_PTLBE" redefined [enabled by default]
     
310. #define MVPCONF0_PTLBE (_ULCAST_(0x3ff) << MVPCONF0_PTLBE_SHIFT)
     
311. ^
     
312. In file included from ibl.c:4:0:
     
313. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:80:0: note: this is the location of the previous definition
     
314. #define MVPCONF0_PTLBE 0x03ff0000
     
315. ^
     
316. In file included from ibl.c:6:0:
     
317. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:114:0: warning: "MVPCONF0_TLBS" redefined [enabled by default]
     
318. #define MVPCONF0_TLBS (_ULCAST_(1) << MVPCONF0_TLBS_SHIFT)
     
319. ^
     
320. In file included from ibl.c:4:0:
     
321. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:82:0: note: this is the location of the previous definition
     
322. #define MVPCONF0_TLBS 0x20000000
     
323. ^
     
324. In file included from ibl.c:6:0:
     
325. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:116:0: warning: "MVPCONF0_M" redefined [enabled by default]
     
326. #define MVPCONF0_M (_ULCAST_(0x1) << MVPCONF0_M_SHIFT)
     
327. ^
     
328. In file included from ibl.c:4:0:
     
329. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:83:0: note: this is the location of the previous definition
     
330. #define MVPCONF0_M 0x80000000
     
331. ^
     
332. In file included from ibl.c:6:0:
     
333. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:125:0: warning: "VPECONTROL_TARGTC" redefined [enabled by default]
     
334. #define VPECONTROL_TARGTC (_ULCAST_(0xff))
     
335. ^
     
336. In file included from ibl.c:4:0:
     
337. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:100:0: note: this is the location of the previous definition
     
338. #define VPECONTROL_TARGTC 0x000000ff
     
339. ^
     
340. In file included from ibl.c:6:0:
     
341. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:128:0: warning: "VPECONTROL_TE" redefined [enabled by default]
     
342. #define VPECONTROL_TE (_ULCAST_(1) << VPECONTROL_TE_SHIFT)
     
343. ^
     
344. In file included from ibl.c:4:0:
     
345. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:104:0: note: this is the location of the previous definition
     
346. #define VPECONTROL_TE 0x00008000
     
347. ^
     
348. In file included from ibl.c:6:0:
     
349. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:130:0: warning: "VPECONTROL_EXCPT" redefined [enabled by default]
     
350. #define VPECONTROL_EXCPT (_ULCAST_(0x7) << VPECONTROL_EXCPT_SHIFT)
     
351. ^
     
352. In file included from ibl.c:4:0:
     
353. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:105:0: note: this is the location of the previous definition
     
354. #define VPECONTROL_EXCPT 0x00070000
     
355. ^
     
356. In file included from ibl.c:6:0:
     
357. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:141:0: warning: "VPECONTROL_GSI" redefined [enabled by default]
     
358. #define VPECONTROL_GSI (_ULCAST_(1) << VPECONTROL_GSI_SHIFT)
     
359. ^
     
360. In file included from ibl.c:4:0:
     
361. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:107:0: note: this is the location of the previous definition
     
362. #define VPECONTROL_GSI 0x00100000
     
363. ^
     
364. In file included from ibl.c:6:0:
     
365. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:143:0: warning: "VPECONTROL_YSI" redefined [enabled by default]
     
366. #define VPECONTROL_YSI (_ULCAST_(1) << VPECONTROL_YSI_SHIFT)
     
367. ^
     
368. In file included from ibl.c:4:0:
     
369. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:108:0: note: this is the location of the previous definition
     
370. #define VPECONTROL_YSI 0x00200000
     
371. ^
     
372. In file included from ibl.c:6:0:
     
373. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:147:0: warning: "VPECONF0_VPA" redefined [enabled by default]
     
374. #define VPECONF0_VPA (_ULCAST_(1) << VPECONF0_VPA_SHIFT)
     
375. ^
     
376. In file included from ibl.c:4:0:
     
377. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:113:0: note: this is the location of the previous definition
     
378. #define VPECONF0_VPA 0x00000001
     
379. ^
     
380. In file included from ibl.c:6:0:
     
381. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:149:0: warning: "VPECONF0_MVP" redefined [enabled by default]
     
382. #define VPECONF0_MVP (_ULCAST_(1) << VPECONF0_MVP_SHIFT)
     
383. ^
     
384. In file included from ibl.c:4:0:
     
385. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:114:0: note: this is the location of the previous definition
     
386. #define VPECONF0_MVP 0x00000002
     
387. ^
     
388. In file included from ibl.c:6:0:
     
389. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:159:0: warning: "VPECONF0_XTC" redefined [enabled by default]
     
390. #define VPECONF0_XTC (_ULCAST_(0xff) << VPECONF0_XTC_SHIFT)
     
391. ^
     
392. In file included from ibl.c:4:0:
     
393. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:115:0: note: this is the location of the previous definition
     
394. #define VPECONF0_XTC 0x1fe00000
     
395. ^
     
396. In file included from ibl.c:6:0:
     
397. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:176:0: warning: "TCSTATUS_TASID" redefined [enabled by default]
     
398. #define TCSTATUS_TASID (_ULCAST_(0xff))
     
399. ^
     
400. In file included from ibl.c:4:0:
     
401. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:138:0: note: this is the location of the previous definition
     
402. #define TCSTATUS_TASID 0x000000ff
     
403. ^
     
404. In file included from ibl.c:6:0:
     
405. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:178:0: warning: "TCSTATUS_IXMT" redefined [enabled by default]
     
406. #define TCSTATUS_IXMT (_ULCAST_(1) << TCSTATUS_IXMT_SHIFT)
     
407. ^
     
408. In file included from ibl.c:4:0:
     
409. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:140:0: note: this is the location of the previous definition
     
410. #define TCSTATUS_IXMT 0x00000400
     
411. ^
     
412. In file included from ibl.c:6:0:
     
413. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:180:0: warning: "TCSTATUS_TKSU" redefined [enabled by default]
     
414. #define TCSTATUS_TKSU (_ULCAST_(3) << TCSTATUS_TKSU_SHIFT)
     
415. ^
     
416. In file included from ibl.c:4:0:
     
417. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:141:0: note: this is the location of the previous definition
     
418. #define TCSTATUS_TKSU 0x00001800
     
419. ^
     
420. In file included from ibl.c:6:0:
     
421. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:182:0: warning: "TCSTATUS_A" redefined [enabled by default]
     
422. #define TCSTATUS_A (_ULCAST_(1) << TCSTATUS_A_SHIFT)
     
423. ^
     
424. In file included from ibl.c:4:0:
     
425. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:143:0: note: this is the location of the previous definition
     
426. #define TCSTATUS_A 0x00002000
     
427. ^
     
428. In file included from ibl.c:6:0:
     
429. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:184:0: warning: "TCSTATUS_DA" redefined [enabled by default]
     
430. #define TCSTATUS_DA (_ULCAST_(1) << TCSTATUS_DA_SHIFT)
     
431. ^
     
432. In file included from ibl.c:4:0:
     
433. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:144:0: note: this is the location of the previous definition
     
434. #define TCSTATUS_DA 0x00008000
     
435. ^
     
436. In file included from ibl.c:6:0:
     
437. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:186:0: warning: "TCSTATUS_DT" redefined [enabled by default]
     
438. #define TCSTATUS_DT (_ULCAST_(1) << TCSTATUS_DT_SHIFT)
     
439. ^
     
440. In file included from ibl.c:4:0:
     
441. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:147:0: note: this is the location of the previous definition
     
442. #define TCSTATUS_DT 0x00100000
     
443. ^
     
444. In file included from ibl.c:6:0:
     
445. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:188:0: warning: "TCSTATUS_TDS" redefined [enabled by default]
     
446. #define TCSTATUS_TDS (_ULCAST_(1) << TCSTATUS_TDS_SHIFT)
     
447. ^
     
448. In file included from ibl.c:4:0:
     
449. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:148:0: note: this is the location of the previous definition
     
450. #define TCSTATUS_TDS 0x00200000
     
451. ^
     
452. In file included from ibl.c:6:0:
     
453. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:190:0: warning: "TCSTATUS_TSST" redefined [enabled by default]
     
454. #define TCSTATUS_TSST (_ULCAST_(1) << TCSTATUS_TSST_SHIFT)
     
455. ^
     
456. In file included from ibl.c:4:0:
     
457. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:149:0: note: this is the location of the previous definition
     
458. #define TCSTATUS_TSST 0x00400000
     
459. ^
     
460. In file included from ibl.c:6:0:
     
461. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:192:0: warning: "TCSTATUS_RNST" redefined [enabled by default]
     
462. #define TCSTATUS_RNST (_ULCAST_(3) << TCSTATUS_RNST_SHIFT)
     
463. ^
     
464. In file included from ibl.c:4:0:
     
465. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:150:0: note: this is the location of the previous definition
     
466. #define TCSTATUS_RNST 0x01800000
     
467. ^
     
468. In file included from ibl.c:6:0:
     
469. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:205:0: warning: "TCBIND_CURVPE" redefined [enabled by default]
     
470. #define TCBIND_CURVPE (_ULCAST_(0xf))
     
471. ^
     
472. In file included from ibl.c:4:0:
     
473. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:160:0: note: this is the location of the previous definition
     
474. #define TCBIND_CURVPE 0x0000000f
     
475. ^
     
476. In file included from ibl.c:6:0:
     
477. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:209:0: warning: "TCBIND_CURTC" redefined [enabled by default]
     
478. #define TCBIND_CURTC (_ULCAST_(0xff) << TCBIND_CURTC_SHIFT)
     
479. ^
     
480. In file included from ibl.c:4:0:
     
481. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:162:0: note: this is the location of the previous definition
     
482. #define TCBIND_CURTC 0x1fe00000
     
483. ^
     
484. In file included from ibl.c:6:0:
     
485. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:212:0: warning: "TCHALT_H" redefined [enabled by default]
     
486. #define TCHALT_H (_ULCAST_(1))
     
487. ^
     
488. In file included from ibl.c:4:0:
     
489. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mt.h:168:0: note: this is the location of the previous definition
     
490. #define TCHALT_H 0x00000001
     
491. ^
     
492. In file included from ibl.c:6:0:
     
493. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h: In function 'dvpe':
     
494. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/mipsmtregs.h:231:2: warning: implicit declaration of function 'instruction_hazard' [-Wimplicit-function-declaration]
     
495. instruction_hazard();
     
496. ^
     
497. ibl.c: In function 'ibl':
     
498. ibl.c:210:13: warning: unused variable 'i' [-Wunused-variable]
     
499. int i;
     
500. ^
     
501. ibl.c:209:17: warning: unused variable 'pnd' [-Wunused-variable]
     
502. u32 msk,pnd;
     
503. ^
     
504. ibl.c:209:13: warning: unused variable 'msk' [-Wunused-variable]
     
505. u32 msk,pnd;
     
506. ^
     
507. {standard input}: Assembler messages:
     
508. {standard input}:26: Warning: the `mt' extension requires MIPS64 revision 2 or greater
     
509. mips-openwrt-linux-uclibc-ar crv libmips.a lowlevel_init.o init_cache.o init_vpe1.o init_exception.o cpu.o clock.o interrupts.o cache.o interaptiv.o ibl.o
     
510. a - lowlevel_init.o
     
511. a - init_cache.o
     
512. a - init_vpe1.o
     
513. a - init_exception.o
     
514. a - cpu.o
     
515. a - clock.o
     
516. a - interrupts.o
     
517. a - cache.o
     
518. a - interaptiv.o
     
519. a - ibl.o
     
520. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/arch/mips/cpu/grx500'
     
521. make -C arch/mips/lib/
     
522. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/arch/mips/lib'
     
523. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/arch/mips/lib'
     
524. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/arch/mips/lib'
     
525. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
526. -o board.o board.c -c
     
527. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
528. -o bootm.o bootm.c -c
     
529. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
530. -o time.o time.c -c
     
531. time.c: In function 'mdelay':
     
532. time.c:89:14: warning: unused variable 'j' [-Wunused-variable]
     
533. int i,j;
     
534. ^
     
535. mips-openwrt-linux-uclibc-ar crv libmips.a board.o bootm.o time.o
     
536. a - board.o
     
537. a - bootm.o
     
538. a - time.o
     
539. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/arch/mips/lib'
     
540. make -C fs/cramfs/
     
541. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/fs/cramfs'
     
542. mips-openwrt-linux-uclibc-ar crv libcramfs.a
     
543. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/fs/cramfs'
     
544. make -C fs/fat/
     
545. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/fs/fat'
     
546. mips-openwrt-linux-uclibc-ar crv libfat.a
     
547. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/fs/fat'
     
548. make -C fs/fdos/
     
549. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/fs/fdos'
     
550. mips-openwrt-linux-uclibc-ar crv libfdos.a
     
551. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/fs/fdos'
     
552. make -C fs/jffs2/
     
553. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/fs/jffs2'
     
554. mips-openwrt-linux-uclibc-ar crv libjffs2.a
     
555. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/fs/jffs2'
     
556. make -C fs/reiserfs/
     
557. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/fs/reiserfs'
     
558. mips-openwrt-linux-uclibc-ar crv libreiserfs.a
     
559. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/fs/reiserfs'
     
560. make -C fs/ext2/
     
561. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/fs/ext2'
     
562. mips-openwrt-linux-uclibc-ar crv libext2fs.a
     
563. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/fs/ext2'
     
564. make -C fs/yaffs2/
     
565. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/fs/yaffs2'
     
566. mips-openwrt-linux-uclibc-ar crv libyaffs2.a
     
567. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/fs/yaffs2'
     
568. make -C fs/ubifs/
     
569. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/fs/ubifs'
     
570. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/fs/ubifs'
     
571. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/fs/ubifs'
     
572. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
573. -o ubifs.o ubifs.c -c
     
574. In file included from ubifs.h:2137:0,
     
575. from ubifs.c:26:
     
576. misc.h: In function 'ubifs_zn_dirty':
     
577. misc.h:38:2: warning: passing argument 2 of 'test_bit' discards 'const' qualifier from pointer target type [enabled by default]
     
578. return !!test_bit(DIRTY_ZNODE, &znode->flags);
     
579. ^
     
580. In file included from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/bitops.h:110:0,
     
581. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/common.h:38,
     
582. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/ubi_uboot.h:17,
     
583. from ubifs.h:34,
     
584. from ubifs.c:26:
     
585. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/bitops.h:569:23: note: expected 'volatile void *' but argument is of type 'const long unsigned int *'
     
586. static __inline__ int test_bit(int nr, volatile void *addr)
     
587. ^
     
588. In file included from ubifs.h:35:0,
     
589. from ubifs.c:26:
     
590. ubifs.c: At top level:
     
591. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/ctype.h:18:15: warning: array '_ctype' assumed to have one element [enabled by default]
     
592. unsigned char _ctype[];
     
593. ^
     
594. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
595. -o io.o io.c -c
     
596. In file included from ubifs.h:2137:0,
     
597. from io.c:53:
     
598. misc.h: In function 'ubifs_zn_dirty':
     
599. misc.h:38:2: warning: passing argument 2 of 'test_bit' discards 'const' qualifier from pointer target type [enabled by default]
     
600. return !!test_bit(DIRTY_ZNODE, &znode->flags);
     
601. ^
     
602. In file included from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/bitops.h:110:0,
     
603. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/common.h:38,
     
604. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/ubi_uboot.h:17,
     
605. from ubifs.h:34,
     
606. from io.c:53:
     
607. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/bitops.h:569:23: note: expected 'volatile void *' but argument is of type 'const long unsigned int *'
     
608. static __inline__ int test_bit(int nr, volatile void *addr)
     
609. ^
     
610. In file included from ubifs.h:35:0,
     
611. from io.c:53:
     
612. io.c: At top level:
     
613. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/ctype.h:18:15: warning: array '_ctype' assumed to have one element [enabled by default]
     
614. unsigned char _ctype[];
     
615. ^
     
616. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
617. -o super.o super.c -c
     
618. In file included from ubifs.h:2137:0,
     
619. from super.c:29:
     
620. misc.h: In function 'ubifs_zn_dirty':
     
621. misc.h:38:2: warning: passing argument 2 of 'test_bit' discards 'const' qualifier from pointer target type [enabled by default]
     
622. return !!test_bit(DIRTY_ZNODE, &znode->flags);
     
623. ^
     
624. In file included from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/bitops.h:110:0,
     
625. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/common.h:38,
     
626. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/ubi_uboot.h:17,
     
627. from ubifs.h:34,
     
628. from super.c:29:
     
629. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/bitops.h:569:23: note: expected 'volatile void *' but argument is of type 'const long unsigned int *'
     
630. static __inline__ int test_bit(int nr, volatile void *addr)
     
631. ^
     
632. In file included from ubifs.h:35:0,
     
633. from super.c:29:
     
634. super.c: At top level:
     
635. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/ctype.h:18:15: warning: array '_ctype' assumed to have one element [enabled by default]
     
636. unsigned char _ctype[];
     
637. ^
     
638. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
639. -o sb.o sb.c -c
     
640. In file included from ubifs.h:2137:0,
     
641. from sb.c:29:
     
642. misc.h: In function 'ubifs_zn_dirty':
     
643. misc.h:38:2: warning: passing argument 2 of 'test_bit' discards 'const' qualifier from pointer target type [enabled by default]
     
644. return !!test_bit(DIRTY_ZNODE, &znode->flags);
     
645. ^
     
646. In file included from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/bitops.h:110:0,
     
647. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/common.h:38,
     
648. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/ubi_uboot.h:17,
     
649. from ubifs.h:34,
     
650. from sb.c:29:
     
651. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/bitops.h:569:23: note: expected 'volatile void *' but argument is of type 'const long unsigned int *'
     
652. static __inline__ int test_bit(int nr, volatile void *addr)
     
653. ^
     
654. In file included from ubifs.h:35:0,
     
655. from sb.c:29:
     
656. sb.c: At top level:
     
657. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/ctype.h:18:15: warning: array '_ctype' assumed to have one element [enabled by default]
     
658. unsigned char _ctype[];
     
659. ^
     
660. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
661. -o master.o master.c -c
     
662. In file included from ubifs.h:2137:0,
     
663. from master.c:25:
     
664. misc.h: In function 'ubifs_zn_dirty':
     
665. misc.h:38:2: warning: passing argument 2 of 'test_bit' discards 'const' qualifier from pointer target type [enabled by default]
     
666. return !!test_bit(DIRTY_ZNODE, &znode->flags);
     
667. ^
     
668. In file included from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/bitops.h:110:0,
     
669. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/common.h:38,
     
670. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/ubi_uboot.h:17,
     
671. from ubifs.h:34,
     
672. from master.c:25:
     
673. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/bitops.h:569:23: note: expected 'volatile void *' but argument is of type 'const long unsigned int *'
     
674. static __inline__ int test_bit(int nr, volatile void *addr)
     
675. ^
     
676. 
     

复制代码

paldier

1. In file included from ubifs.h:35:0,
   
2. from master.c:25:
   
3. master.c: At top level:
   
4. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/ctype.h:18:15: warning: array '_ctype' assumed to have one element [enabled by default]
   
5. unsigned char _ctype[];
   
6. ^
   
7. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
   
8. -o lpt.o lpt.c -c
   
9. In file included from ubifs.h:2137:0,
   
10. from lpt.c:46:
    
11. misc.h: In function 'ubifs_zn_dirty':
    
12. misc.h:38:2: warning: passing argument 2 of 'test_bit' discards 'const' qualifier from pointer target type [enabled by default]
    
13. return !!test_bit(DIRTY_ZNODE, &znode->flags);
    
14. ^
    
15. In file included from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/bitops.h:110:0,
    
16. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/common.h:38,
    
17. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/ubi_uboot.h:17,
    
18. from ubifs.h:34,
    
19. from lpt.c:46:
    
20. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/bitops.h:569:23: note: expected 'volatile void *' but argument is of type 'const long unsigned int *'
    
21. static __inline__ int test_bit(int nr, volatile void *addr)
    
22. ^
    
23. In file included from ubifs.h:35:0,
    
24. from lpt.c:46:
    
25. lpt.c: At top level:
    
26. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/ctype.h:18:15: warning: array '_ctype' assumed to have one element [enabled by default]
    
27. unsigned char _ctype[];
    
28. ^
    
29. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
    
30. -o lpt_commit.o lpt_commit.c -c
    
31. In file included from ubifs.h:2137:0,
    
32. from lpt_commit.c:29:
    
33. misc.h: In function 'ubifs_zn_dirty':
    
34. misc.h:38:2: warning: passing argument 2 of 'test_bit' discards 'const' qualifier from pointer target type [enabled by default]
    
35. return !!test_bit(DIRTY_ZNODE, &znode->flags);
    
36. ^
    
37. In file included from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/bitops.h:110:0,
    
38. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/common.h:38,
    
39. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/ubi_uboot.h:17,
    
40. from ubifs.h:34,
    
41. from lpt_commit.c:29:
    
42. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/bitops.h:569:23: note: expected 'volatile void *' but argument is of type 'const long unsigned int *'
    
43. static __inline__ int test_bit(int nr, volatile void *addr)
    
44. ^
    
45. In file included from ubifs.h:35:0,
    
46. from lpt_commit.c:29:
    
47. lpt_commit.c: At top level:
    
48. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/ctype.h:18:15: warning: array '_ctype' assumed to have one element [enabled by default]
    
49. unsigned char _ctype[];
    
50. ^
    
51. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
    
52. -o scan.o scan.c -c
    
53. In file included from ubifs.h:2137:0,
    
54. from scan.c:30:
    
55. misc.h: In function 'ubifs_zn_dirty':
    
56. misc.h:38:2: warning: passing argument 2 of 'test_bit' discards 'const' qualifier from pointer target type [enabled by default]
    
57. return !!test_bit(DIRTY_ZNODE, &znode->flags);
    
58. ^
    
59. In file included from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/bitops.h:110:0,
    
60. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/common.h:38,
    
61. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/ubi_uboot.h:17,
    
62. from ubifs.h:34,
    
63. from scan.c:30:
    
64. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/bitops.h:569:23: note: expected 'volatile void *' but argument is of type 'const long unsigned int *'
    
65. static __inline__ int test_bit(int nr, volatile void *addr)
    
66. ^
    
67. In file included from ubifs.h:35:0,
    
68. from scan.c:30:
    
69. scan.c: At top level:
    
70. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/ctype.h:18:15: warning: array '_ctype' assumed to have one element [enabled by default]
    
71. unsigned char _ctype[];
    
72. ^
    
73. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
    
74. -o lprops.o lprops.c -c
    
75. In file included from ubifs.h:2137:0,
    
76. from lprops.c:31:
    
77. misc.h: In function 'ubifs_zn_dirty':
    
78. misc.h:38:2: warning: passing argument 2 of 'test_bit' discards 'const' qualifier from pointer target type [enabled by default]
    
79. return !!test_bit(DIRTY_ZNODE, &znode->flags);
    
80. ^
    
81. In file included from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/bitops.h:110:0,
    
82. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/common.h:38,
    
83. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/ubi_uboot.h:17,
    
84. from ubifs.h:34,
    
85. from lprops.c:31:
    
86. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/bitops.h:569:23: note: expected 'volatile void *' but argument is of type 'const long unsigned int *'
    
87. static __inline__ int test_bit(int nr, volatile void *addr)
    
88. ^
    
89. In file included from ubifs.h:35:0,
    
90. from lprops.c:31:
    
91. lprops.c: At top level:
    
92. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/ctype.h:18:15: warning: array '_ctype' assumed to have one element [enabled by default]
    
93. unsigned char _ctype[];
    
94. ^
    
95. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
    
96. -o tnc.o tnc.c -c
    
97. In file included from ubifs.h:2137:0,
    
98. from tnc.c:33:
    
99. misc.h: In function 'ubifs_zn_dirty':
    
100. misc.h:38:2: warning: passing argument 2 of 'test_bit' discards 'const' qualifier from pointer target type [enabled by default]
     
101. return !!test_bit(DIRTY_ZNODE, &znode->flags);
     
102. ^
     
103. In file included from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/bitops.h:110:0,
     
104. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/common.h:38,
     
105. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/ubi_uboot.h:17,
     
106. from ubifs.h:34,
     
107. from tnc.c:33:
     
108. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/bitops.h:569:23: note: expected 'volatile void *' but argument is of type 'const long unsigned int *'
     
109. static __inline__ int test_bit(int nr, volatile void *addr)
     
110. ^
     
111. In file included from ubifs.h:35:0,
     
112. from tnc.c:33:
     
113. tnc.c: At top level:
     
114. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/ctype.h:18:15: warning: array '_ctype' assumed to have one element [enabled by default]
     
115. unsigned char _ctype[];
     
116. ^
     
117. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
118. -o tnc_misc.o tnc_misc.c -c
     
119. In file included from ubifs.h:2137:0,
     
120. from tnc_misc.c:30:
     
121. misc.h: In function 'ubifs_zn_dirty':
     
122. misc.h:38:2: warning: passing argument 2 of 'test_bit' discards 'const' qualifier from pointer target type [enabled by default]
     
123. return !!test_bit(DIRTY_ZNODE, &znode->flags);
     
124. ^
     
125. In file included from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/bitops.h:110:0,
     
126. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/common.h:38,
     
127. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/ubi_uboot.h:17,
     
128. from ubifs.h:34,
     
129. from tnc_misc.c:30:
     
130. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/bitops.h:569:23: note: expected 'volatile void *' but argument is of type 'const long unsigned int *'
     
131. static __inline__ int test_bit(int nr, volatile void *addr)
     
132. ^
     
133. In file included from ubifs.h:35:0,
     
134. from tnc_misc.c:30:
     
135. tnc_misc.c: At top level:
     
136. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/ctype.h:18:15: warning: array '_ctype' assumed to have one element [enabled by default]
     
137. unsigned char _ctype[];
     
138. ^
     
139. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
140. -o debug.o debug.c -c
     
141. In file included from ubifs.h:2137:0,
     
142. from debug.c:32:
     
143. misc.h: In function 'ubifs_zn_dirty':
     
144. misc.h:38:2: warning: passing argument 2 of 'test_bit' discards 'const' qualifier from pointer target type [enabled by default]
     
145. return !!test_bit(DIRTY_ZNODE, &znode->flags);
     
146. ^
     
147. In file included from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/bitops.h:110:0,
     
148. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/common.h:38,
     
149. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/ubi_uboot.h:17,
     
150. from ubifs.h:34,
     
151. from debug.c:32:
     
152. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/bitops.h:569:23: note: expected 'volatile void *' but argument is of type 'const long unsigned int *'
     
153. static __inline__ int test_bit(int nr, volatile void *addr)
     
154. ^
     
155. In file included from ubifs.h:35:0,
     
156. from debug.c:32:
     
157. debug.c: At top level:
     
158. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/ctype.h:18:15: warning: array '_ctype' assumed to have one element [enabled by default]
     
159. unsigned char _ctype[];
     
160. ^
     
161. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
162. -o crc16.o crc16.c -c
     
163. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
164. -o budget.o budget.c -c
     
165. In file included from ubifs.h:2137:0,
     
166. from budget.c:33:
     
167. misc.h: In function 'ubifs_zn_dirty':
     
168. misc.h:38:2: warning: passing argument 2 of 'test_bit' discards 'const' qualifier from pointer target type [enabled by default]
     
169. return !!test_bit(DIRTY_ZNODE, &znode->flags);
     
170. ^
     
171. In file included from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/bitops.h:110:0,
     
172. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/common.h:38,
     
173. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/ubi_uboot.h:17,
     
174. from ubifs.h:34,
     
175. from budget.c:33:
     
176. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/bitops.h:569:23: note: expected 'volatile void *' but argument is of type 'const long unsigned int *'
     
177. static __inline__ int test_bit(int nr, volatile void *addr)
     
178. ^
     
179. In file included from ubifs.h:35:0,
     
180. from budget.c:33:
     
181. budget.c: At top level:
     
182. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/ctype.h:18:15: warning: array '_ctype' assumed to have one element [enabled by default]
     
183. unsigned char _ctype[];
     
184. ^
     
185. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
186. -o log.o log.c -c
     
187. In file included from ubifs.h:2137:0,
     
188. from log.c:30:
     
189. misc.h: In function 'ubifs_zn_dirty':
     
190. misc.h:38:2: warning: passing argument 2 of 'test_bit' discards 'const' qualifier from pointer target type [enabled by default]
     
191. return !!test_bit(DIRTY_ZNODE, &znode->flags);
     
192. ^
     
193. In file included from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/bitops.h:110:0,
     
194. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/common.h:38,
     
195. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/ubi_uboot.h:17,
     
196. from ubifs.h:34,
     
197. from log.c:30:
     
198. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/bitops.h:569:23: note: expected 'volatile void *' but argument is of type 'const long unsigned int *'
     
199. static __inline__ int test_bit(int nr, volatile void *addr)
     
200. ^
     
201. In file included from ubifs.h:35:0,
     
202. from log.c:30:
     
203. log.c: At top level:
     
204. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/ctype.h:18:15: warning: array '_ctype' assumed to have one element [enabled by default]
     
205. unsigned char _ctype[];
     
206. ^
     
207. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
208. -o orphan.o orphan.c -c
     
209. In file included from ubifs.h:2137:0,
     
210. from orphan.c:22:
     
211. misc.h: In function 'ubifs_zn_dirty':
     
212. misc.h:38:2: warning: passing argument 2 of 'test_bit' discards 'const' qualifier from pointer target type [enabled by default]
     
213. return !!test_bit(DIRTY_ZNODE, &znode->flags);
     
214. ^
     
215. In file included from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/bitops.h:110:0,
     
216. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/common.h:38,
     
217. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/ubi_uboot.h:17,
     
218. from ubifs.h:34,
     
219. from orphan.c:22:
     
220. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/bitops.h:569:23: note: expected 'volatile void *' but argument is of type 'const long unsigned int *'
     
221. static __inline__ int test_bit(int nr, volatile void *addr)
     
222. ^
     
223. In file included from ubifs.h:35:0,
     
224. from orphan.c:22:
     
225. orphan.c: At top level:
     
226. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/ctype.h:18:15: warning: array '_ctype' assumed to have one element [enabled by default]
     
227. unsigned char _ctype[];
     
228. ^
     
229. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
230. -o recovery.o recovery.c -c
     
231. In file included from ubifs.h:2137:0,
     
232. from recovery.c:33:
     
233. misc.h: In function 'ubifs_zn_dirty':
     
234. misc.h:38:2: warning: passing argument 2 of 'test_bit' discards 'const' qualifier from pointer target type [enabled by default]
     
235. return !!test_bit(DIRTY_ZNODE, &znode->flags);
     
236. ^
     
237. In file included from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/bitops.h:110:0,
     
238. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/common.h:38,
     
239. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/ubi_uboot.h:17,
     
240. from ubifs.h:34,
     
241. from recovery.c:33:
     
242. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/bitops.h:569:23: note: expected 'volatile void *' but argument is of type 'const long unsigned int *'
     
243. static __inline__ int test_bit(int nr, volatile void *addr)
     
244. ^
     
245. In file included from ubifs.h:35:0,
     
246. from recovery.c:33:
     
247. recovery.c: At top level:
     
248. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/ctype.h:18:15: warning: array '_ctype' assumed to have one element [enabled by default]
     
249. unsigned char _ctype[];
     
250. ^
     
251. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
252. -o replay.o replay.c -c
     
253. In file included from ubifs.h:2137:0,
     
254. from replay.c:35:
     
255. misc.h: In function 'ubifs_zn_dirty':
     
256. misc.h:38:2: warning: passing argument 2 of 'test_bit' discards 'const' qualifier from pointer target type [enabled by default]
     
257. return !!test_bit(DIRTY_ZNODE, &znode->flags);
     
258. ^
     
259. In file included from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/bitops.h:110:0,
     
260. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/common.h:38,
     
261. from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/ubi_uboot.h:17,
     
262. from ubifs.h:34,
     
263. from replay.c:35:
     
264. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/asm/bitops.h:569:23: note: expected 'volatile void *' but argument is of type 'const long unsigned int *'
     
265. static __inline__ int test_bit(int nr, volatile void *addr)
     
266. ^
     
267. In file included from ubifs.h:35:0,
     
268. from replay.c:35:
     
269. replay.c: At top level:
     
270. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/ctype.h:18:15: warning: array '_ctype' assumed to have one element [enabled by default]
     
271. unsigned char _ctype[];
     
272. ^
     
273. mips-openwrt-linux-uclibc-ar crv libubifs.a ubifs.o io.o super.o sb.o master.o lpt.o lpt_commit.o scan.o lprops.o tnc.o tnc_misc.o debug.o crc16.o budget.o log.o orphan.o recovery.o replay.o
     
274. a - ubifs.o
     
275. a - io.o
     
276. a - super.o
     
277. a - sb.o
     
278. a - master.o
     
279. a - lpt.o
     
280. a - lpt_commit.o
     
281. a - scan.o
     
282. a - lprops.o
     
283. a - tnc.o
     
284. a - tnc_misc.o
     
285. a - debug.o
     
286. a - crc16.o
     
287. a - budget.o
     
288. a - log.o
     
289. a - orphan.o
     
290. a - recovery.o
     
291. a - replay.o
     
292. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/fs/ubifs'
     
293. make -C net/
     
294. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/net'
     
295. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/net'
     
296. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/net'
     
297. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
298. -o bootp.o bootp.c -c
     
299. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
300. -o eth.o eth.c -c
     
301. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
302. -o net.o net.c -c
     
303. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
304. -o rarp.o rarp.c -c
     
305. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
306. -o tftp.o tftp.c -c
     
307. mips-openwrt-linux-uclibc-ar crv libnet.a bootp.o eth.o net.o rarp.o tftp.o
     
308. a - bootp.o
     
309. a - eth.o
     
310. a - net.o
     
311. a - rarp.o
     
312. a - tftp.o
     
313. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/net'
     
314. make -C disk/
     
315. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/disk'
     
316. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/disk'
     
317. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/disk'
     
318. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
319. -o part.o part.c -c
     
320. mips-openwrt-linux-uclibc-ar crv libdisk.a part.o
     
321. a - part.o
     
322. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/disk'
     
323. make -C drivers/bios_emulator/
     
324. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/bios_emulator'
     
325. mips-openwrt-linux-uclibc-ar crv libatibiosemu.a
     
326. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/bios_emulator'
     
327. make -C drivers/block/
     
328. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/block'
     
329. mips-openwrt-linux-uclibc-ar crv libblock.a
     
330. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/block'
     
331. make -C drivers/dma/
     
332. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/dma'
     
333. mips-openwrt-linux-uclibc-ar crv libdma.a
     
334. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/dma'
     
335. make -C drivers/fpga/
     
336. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/fpga'
     
337. mips-openwrt-linux-uclibc-ar crv libfpga.a
     
338. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/fpga'
     
339. make -C drivers/gpio/
     
340. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/gpio'
     
341. mips-openwrt-linux-uclibc-ar crv libgpio.a
     
342. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/gpio'
     
343. make -C drivers/hwmon/
     
344. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/hwmon'
     
345. mips-openwrt-linux-uclibc-ar crv libhwmon.a
     
346. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/hwmon'
     
347. make -C drivers/i2c/
     
348. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/i2c'
     
349. mips-openwrt-linux-uclibc-ar crv libi2c.a
     
350. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/i2c'
     
351. make -C drivers/input/
     
352. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/input'
     
353. mips-openwrt-linux-uclibc-ar crv libinput.a
     
354. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/input'
     
355. make -C drivers/misc/
     
356. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/misc'
     
357. mips-openwrt-linux-uclibc-ar crv libmisc.a
     
358. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/misc'
     
359. make -C drivers/mmc/
     
360. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/mmc'
     
361. mips-openwrt-linux-uclibc-ar crv libmmc.a
     
362. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/mmc'
     
363. make -C drivers/mtd/
     
364. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/mtd'
     
365. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/mtd'
     
366. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/mtd'
     
367. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
368. -o mtdcore.o mtdcore.c -c
     
369. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
370. -o mtdpart.o mtdpart.c -c
     
371. mips-openwrt-linux-uclibc-ar crv libmtd.a mtdcore.o mtdpart.o
     
372. a - mtdcore.o
     
373. a - mtdpart.o
     
374. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/mtd'
     
375. make -C drivers/mtd/nand/
     
376. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/mtd/nand'
     
377. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/mtd/nand'
     
378. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/mtd/nand'
     
379. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
380. -o nand.o nand.c -c
     
381. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
382. -o nand_base.o nand_base.c -c
     
383. nand_base.c: In function 'nand_write_partial':
     
384. nand_base.c:2312:14: warning: assignment discards 'const' qualifier from pointer target type [enabled by default]
     
385. sect_buf = buf;
     
386. ^
     
387. nand_base.c:2349:23: warning: assignment discards 'const' qualifier from pointer target type [enabled by default]
     
388. sect_buf = buf + (i+1)*sector_size - (offset % sector_size);
     
389. ^
     
390. nand_base.c:2295:9: warning: unused variable 'ret' [-Wunused-variable]
     
391. int ret;
     
392. ^
     
393. nand_base.c:2294:12: warning: unused variable 'actual' [-Wunused-variable]
     
394. size_t actual;
     
395. ^
     
396. nand_base.c:2293:14: warning: unused variable 'chunk_len' [-Wunused-variable]
     
397. size_t chunk_len;
     
398. ^
     
399. nand_base.c: In function 'sanitize_string':
     
400. nand_base.c:2852:2: warning: implicit declaration of function 'strim' [-Wimplicit-function-declaration]
     
401. strim(s);
     
402. ^
     
403. nand_base.c: In function 'nand_flash_detect_onfi':
     
404. nand_base.c:2919:2: warning: pointer targets in passing argument 1 of 'sanitize_string' differ in signedness [-Wpointer-sign]
     
405. sanitize_string(p->manufacturer, sizeof(p->manufacturer));
     
406. ^
     
407. nand_base.c:2838:13: note: expected 'uint8_t *' but argument is of type 'char *'
     
408. static void sanitize_string(uint8_t *s, size_t len)
     
409. ^
     
410. nand_base.c:2920:2: warning: pointer targets in passing argument 1 of 'sanitize_string' differ in signedness [-Wpointer-sign]
     
411. sanitize_string(p->model, sizeof(p->model));
     
412. ^
     
413. nand_base.c:2838:13: note: expected 'uint8_t *' but argument is of type 'char *'
     
414. static void sanitize_string(uint8_t *s, size_t len)
     
415. ^
     
416. nand_base.c:2874:8: warning: unused variable 'j' [-Wunused-variable]
     
417. int i,j;
     
418. ^
     
419. nand_base.c: In function 'nand_flash_detect_jedec':
     
420. nand_base.c:2996:5: warning: pointer targets in passing argument 1 of 'sanitize_string' differ in signedness [-Wpointer-sign]
     
421. sanitize_string(p->manufacturer, sizeof(p->manufacturer));
     
422. ^
     
423. nand_base.c:2838:13: note: expected 'uint8_t *' but argument is of type 'char *'
     
424. static void sanitize_string(uint8_t *s, size_t len)
     
425. ^
     
426. nand_base.c:2997:5: warning: pointer targets in passing argument 1 of 'sanitize_string' differ in signedness [-Wpointer-sign]
     
427. sanitize_string(p->model, sizeof(p->model));
     
428. ^
     
429. nand_base.c:2838:13: note: expected 'uint8_t *' but argument is of type 'char *'
     
430. static void sanitize_string(uint8_t *s, size_t len)
     
431. ^
     
432. nand_base.c:2959:28: warning: variable 'ecc' set but not used [-Wunused-but-set-variable]
     
433. struct jedec_ecc_info *ecc;
     
434. ^
     
435. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
436. -o nand_bbt.o nand_bbt.c -c
     
437. nand_bbt.c: In function 'read_bbt':
     
438. nand_bbt.c:168:3: warning: passing argument 4 of 'mtd->read' from incompatible pointer type [enabled by default]
     
439. res = mtd->read(mtd, from, len, &retlen, buf);
     
440. ^
     
441. nand_bbt.c:168:3: note: expected 'u64 *' but argument is of type 'size_t *'
     
442. nand_bbt.c: In function 'search_bbt':
     
443. nand_bbt.c:478:6: warning: variable 'bits' set but not used [-Wunused-but-set-variable]
     
444. int bits, startblock, block, dir;
     
445. ^
     
446. nand_bbt.c: In function 'write_bbt':
     
447. nand_bbt.c:678:4: warning: passing argument 4 of 'mtd->read' from incompatible pointer type [enabled by default]
     
448. res = mtd->read(mtd, to, len, &retlen, buf);
     
449. ^
     
450. nand_bbt.c:678:4: note: expected 'u64 *' but argument is of type 'size_t *'
     
451. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
452. -o nand_ecc.o nand_ecc.c -c
     
453. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
454. -o nand_ids.o nand_ids.c -c
     
455. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
456. -o nand_util.o nand_util.c -c
     
457. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
458. -o nand_bch.o nand_bch.c -c
     
459. nand_bch.c: In function 'nand_bch_init':
     
460. nand_bch.c:210:2: warning: implicit declaration of function 'nand_bch_free' [-Wimplicit-function-declaration]
     
461. nand_bch_free(nbc);
     
462. ^
     
463. nand_bch.c: At top level:
     
464. nand_bch.c:218:6: warning: conflicting types for 'nand_bch_free' [enabled by default]
     
465. void nand_bch_free(struct nand_bch_control *nbc)
     
466. ^
     
467. nand_bch.c:210:2: note: previous implicit declaration of 'nand_bch_free' was here
     
468. nand_bch_free(nbc);
     
469. ^
     
470. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
471. -o lq_nand.o lq_nand.c -c
     
472. lq_nand.c: In function 'ifx_nand_cmd_ctrl':
     
473. lq_nand.c:208:16: warning: unused variable 'oob_features' [-Wunused-variable]
     
474. unsigned int oob_features = 0;
     
475. ^
     
476. lq_nand.c:207:24: warning: unused variable 'chip' [-Wunused-variable]
     
477. struct nand_chip *chip = mtd->priv;
     
478. ^
     
479. lq_nand.c: In function 'NanD_WaitReady':
     
480. lq_nand.c:345:25: warning: unused variable 'nand' [-Wunused-variable]
     
481. struct nand_chip *nand = mtd->priv;
     
482. ^
     
483. lq_nand.c: In function 'ifx_nand_read_byte':
     
484. lq_nand.c:373:25: warning: unused variable 'nand' [-Wunused-variable]
     
485. struct nand_chip *nand = mtd->priv;
     
486. ^
     
487. lq_nand.c: In function 'ifx_nand_read_buf':
     
488. lq_nand.c:393:27: warning: unused variable 'chip' [-Wunused-variable]
     
489. struct nand_chip *chip = mtd->priv;
     
490. ^
     
491. lq_nand.c: In function 'ifx_nand_write_buf':
     
492. lq_nand.c:484:27: warning: unused variable 'chip' [-Wunused-variable]
     
493. struct nand_chip *chip = mtd->priv;
     
494. ^
     
495. lq_nand.c: In function 'ifx_nand_verify_buf':
     
496. lq_nand.c:507:27: warning: unused variable 'chip' [-Wunused-variable]
     
497. struct nand_chip *chip = mtd->priv;
     
498. ^
     
499. lq_nand.c: In function 'ifx_nand_select_chip':
     
500. lq_nand.c:531:25: warning: unused variable 'nand' [-Wunused-variable]
     
501. struct nand_chip *nand = mtd->priv;
     
502. ^
     
503. lq_nand.c: In function 'ifx_nand_chip_init':
     
504. lq_nand.c:1159:14: warning: unused variable 'i' [-Wunused-variable]
     
505. int i;
     
506. ^
     
507. lq_nand.c:1158:33: warning: unused variable 'buf' [-Wunused-variable]
     
508. volatile unsigned char buf;
     
509. ^
     
510. lq_nand.c:1157:33: warning: unused variable 'tmpc' [-Wunused-variable]
     
511. volatile unsigned char tmpc[5];
     
512. ^
     
513. lq_nand.c: In function 'board_nand_init':
     
514. lq_nand.c:1306:20: warning: assignment makes pointer from integer without a cast [enabled by default]
     
515. nand->IO_ADDR_R = NAND_BASE_ADDRESS;
     
516. ^
     
517. lq_nand.c:1307:20: warning: assignment makes pointer from integer without a cast [enabled by default]
     
518. nand->IO_ADDR_W = NAND_BASE_ADDRESS;
     
519. ^
     
520. lq_nand.c: At top level:
     
521. lq_nand.c:359:12: warning: 'ifx_nand_block_bad' defined but not used [-Wunused-function]
     
522. static int ifx_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
     
523. ^
     
524. mips-openwrt-linux-uclibc-ar crv libnand.a nand.o nand_base.o nand_bbt.o nand_ecc.o nand_ids.o nand_util.o nand_bch.o lq_nand.o
     
525. a - nand.o
     
526. a - nand_base.o
     
527. a - nand_bbt.o
     
528. a - nand_ecc.o
     
529. a - nand_ids.o
     
530. a - nand_util.o
     
531. a - nand_bch.o
     
532. a - lq_nand.o
     
533. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/mtd/nand'
     
534. make -C drivers/mtd/onenand/
     
535. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/mtd/onenand'
     
536. mips-openwrt-linux-uclibc-ar crv libonenand.a
     
537. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/mtd/onenand'
     
538. make -C drivers/mtd/ubi/
     
539. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/mtd/ubi'
     
540. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/mtd/ubi'
     
541. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/mtd/ubi'
     
542. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
543. -o build.o build.c -c
     
544. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
545. -o vtbl.o vtbl.c -c
     
546. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
547. -o vmt.o vmt.c -c
     
548. vmt.c: In function 'ubi_free_volume':
     
549. vmt.c:681:6: warning: variable 'err' set but not used [-Wunused-but-set-variable]
     
550. int err;
     
551. ^
     
552. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
553. -o upd.o upd.c -c
     
554. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
555. -o kapi.o kapi.c -c
     
556. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
557. -o eba.o eba.c -c
     
558. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
559. -o io.o io.c -c
     
560. io.c: In function 'ubi_io_read':
     
561. io.c:157:2: warning: passing argument 4 of 'ubi->mtd->read' from incompatible pointer type [enabled by default]
     
562. err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf);
     
563. ^
     
564. io.c:157:2: note: expected 'u64 *' but argument is of type 'size_t *'
     
565. io.c: In function 'ubi_io_write':
     
566. io.c:271:2: warning: passing argument 4 of 'ubi->mtd->write' from incompatible pointer type [enabled by default]
     
567. err = ubi->mtd->write(ubi->mtd, addr, len, &written, buf);
     
568. ^
     
569. io.c:271:2: note: expected 'u64 *' but argument is of type 'size_t *'
     
570. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
571. -o wl.o wl.c -c
     
572. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
573. -o scan.o scan.c -c
     
574. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
575. -o crc32.o crc32.c -c
     
576. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
577. -o misc.o misc.c -c
     
578. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
579. -o debug.o debug.c -c
     
580. mips-openwrt-linux-uclibc-ar crv libubi.a build.o vtbl.o vmt.o upd.o kapi.o eba.o io.o wl.o scan.o crc32.o misc.o debug.o
     
581. a - build.o
     
582. a - vtbl.o
     
583. a - vmt.o
     
584. a - upd.o
     
585. a - kapi.o
     
586. a - eba.o
     
587. a - io.o
     
588. a - wl.o
     
589. a - scan.o
     
590. a - crc32.o
     
591. a - misc.o
     
592. a - debug.o
     
593. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/mtd/ubi'
     
594. make -C drivers/mtd/spi/
     
595. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/mtd/spi'
     
596. mips-openwrt-linux-uclibc-ar crv libspi_flash.a
     
597. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/mtd/spi'
     
598. make -C drivers/net/
     
599. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/net'
     
600. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/net'
     
601. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/net'
     
602. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
603. -o grx500_sw.o grx500_sw.c -c
     
604. grx500_sw.c: In function 'xwayflow_pce_table_write':
     
605. grx500_sw.c:217:12: warning: unused variable 'i' [-Wunused-variable]
     
606. u32 value,i=0;
     
607. ^
     
608. grx500_sw.c: In function 'ltq_grx500_switch_send':
     
609. grx500_sw.c:489:2: warning: implicit declaration of function 'flush_scache_range' [-Wimplicit-function-declaration]
     
610. flush_scache_range((u32)packet, (u32) packet + tx_desc->DW3.field.datalen);
     
611. ^
     
612. grx500_sw.c: In function 'ltq_grx500_switch_recv':
     
613. grx500_sw.c:521:4: warning: implicit declaration of function 'invalidate_scache_range' [-Wimplicit-function-declaration]
     
614. invalidate_scache_range((u32)NetRxPackets[rx_num],
     
615. ^
     
616. grx500_sw.c: In function 'ltq_grx500_dma_init':
     
617. grx500_sw.c:575:15: warning: unused variable 'reg' [-Wunused-variable]
     
618. u32 tmp_reg, reg = 0;
     
619. ^
     
620. grx500_sw.c:575:6: warning: unused variable 'tmp_reg' [-Wunused-variable]
     
621. u32 tmp_reg, reg = 0;
     
622. ^
     
623. grx500_sw.c: In function 'get_gphy_firmware':
     
624. grx500_sw.c:625:10: warning: passing argument 1 of 'memcpy' makes pointer from integer without a cast [enabled by default]
     
625. memcpy(dst,src,65536);
     
626. ^
     
627. In file included from grx500_sw.c:29:0:
     
628. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/malloc.h:373:7: note: expected 'void *' but argument is of type 'u32'
     
629. void* memcpy(void*, const void*, size_t);
     
630. ^
     
631. grx500_sw.c:625:10: warning: passing argument 2 of 'memcpy' makes pointer from integer without a cast [enabled by default]
     
632. memcpy(dst,src,65536);
     
633. ^
     
634. In file included from grx500_sw.c:29:0:
     
635. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/malloc.h:373:7: note: expected 'const void *' but argument is of type 'u32'
     
636. void* memcpy(void*, const void*, size_t);
     
637. ^
     
638. grx500_sw.c:643:10: warning: passing argument 2 of 'lzmaBuffToBuffDecompress' from incompatible pointer type [enabled by default]
     
639. if (lzmaBuffToBuffDecompress(load, &unc_len,image_start, image_len)) {
     
640. ^
     
641. In file included from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/lzma/LzmaTools.h:29:0,
     
642. from grx500_sw.c:48:
     
643. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/lzma/../../lib/lzma/LzmaTools.h:33:12: note: expected 'SizeT *' but argument is of type 'ulong *'
     
644. extern int lzmaBuffToBuffDecompress (unsigned char *outStream, SizeT *uncompressedSize,
     
645. ^
     
646. grx500_sw.c:652:10: warning: pointer targets in passing argument 1 of 'strncmp' differ in signedness [-Wpointer-sign]
     
647. if(strncmp(pimg_header->ih_name, "GRX500 V1.1 GPHY BE", sizeof(pimg_header->ih_name)) == 0)
     
648. ^
     
649. In file included from /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/common.h:40:0,
     
650. from grx500_sw.c:27:
     
651. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/string.h:39:12: note: expected 'const char *' but argument is of type 'uint8_t *'
     
652. extern int strncmp(const char *,const char *,__kernel_size_t);
     
653. ^
     
654. grx500_sw.c:672:16: warning: assignment from incompatible pointer type [enabled by default]
     
655. pimg_header = (u8*)pimg_header+sizeof(image_header_t)+(pimg_header->ih_size);
     
656. ^
     
657. grx500_sw.c:620:10: warning: unused variable 'fw_version' [-Wunused-variable]
     
658. int fw_version = 1; /*1->version 1; 2->version 2*/
     
659. ^
     
660. grx500_sw.c:613:10: warning: unused variable 'srcLen' [-Wunused-variable]
     
661. int srcLen;
     
662. ^
     
663. grx500_sw.c: In function 'gphy_config_gpio':
     
664. grx500_sw.c:700:6: warning: unused variable 'i' [-Wunused-variable]
     
665. int i;
     
666. ^
     
667. grx500_sw.c: In function 'ltq_grx500_sw_chip_init':
     
668. grx500_sw.c:712:6: warning: unused variable 'write_data' [-Wunused-variable]
     
669. u32 write_data;
     
670. ^
     
671. grx500_sw.c: At top level:
     
672. grx500_sw.c:143:13: warning: 'hexdump' defined but not used [-Wunused-function]
     
673. static void hexdump(unsigned char *buf, unsigned int len)
     
674. ^
     
675. grx500_sw.c:197:13: warning: 'debug_dma_reg' defined but not used [-Wunused-function]
     
676. static void debug_dma_reg(char *dir, int chan, int port, u32 base)
     
677. ^
     
678. In file included from grx500_sw.c:44:0:
     
679. lq_microcode.h: In function 'gsw_reg_write':
     
680. lq_microcode.h:389:1: warning: control reaches end of non-void function [-Wreturn-type]
     
681. }
     
682. ^
     
683. grx500_sw.c: In function 'xway_gphy_mmd_write_l':
     
684. grx500_sw.c:195:1: warning: control reaches end of non-void function [-Wreturn-type]
     
685. }
     
686. ^
     
687. grx500_sw.c: In function 'gsw_micro_code_dl_30':
     
688. grx500_sw.c:356:1: warning: control reaches end of non-void function [-Wreturn-type]
     
689. }
     
690. ^
     
691. mips-openwrt-linux-uclibc-ar crv libnet.a grx500_sw.o
     
692. a - grx500_sw.o
     
693. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/net'
     
694. make -C drivers/net/phy/
     
695. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/net/phy'
     
696. mips-openwrt-linux-uclibc-ar crv libphy.a
     
697. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/net/phy'
     
698. make -C drivers/pci/
     
699. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/pci'
     
700. mips-openwrt-linux-uclibc-ar crv libpci.a
     
701. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/pci'
     
702. make -C drivers/pcmcia/
     
703. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/pcmcia'
     
704. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/pcmcia'
     
705. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/pcmcia'
     
706. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
707. -o rpx_pcmcia.o rpx_pcmcia.c -c
     
708. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
709. -o tqm8xx_pcmcia.o tqm8xx_pcmcia.c -c
     
710. mips-openwrt-linux-uclibc-ar crv libpcmcia.a rpx_pcmcia.o tqm8xx_pcmcia.o
     
711. a - rpx_pcmcia.o
     
712. a - tqm8xx_pcmcia.o
     
713. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/pcmcia'
     
714. make -C drivers/power/
     
715. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/power'
     
716. mips-openwrt-linux-uclibc-ar crv libpower.a
     
717. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/power'
     
718. make -C drivers/spi/
     
719. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/spi'
     
720. mips-openwrt-linux-uclibc-ar crv libspi.a
     
721. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/spi'
     
722. make -C drivers/rtc/
     
723. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/rtc'
     
724. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/rtc'
     
725. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/rtc'
     
726. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
727. -o date.o date.c -c
     
728. mips-openwrt-linux-uclibc-ar crv librtc.a date.o
     
729. a - date.o
     
730. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/rtc'
     
731. make -C drivers/serial/
     
732. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/serial'
     
733. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/serial'
     
734. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/serial'
     
735. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
736. -o lq_asc.o lq_asc.c -c
     
737. lq_asc.c: In function 'serial_setbrg':
     
738. lq_asc.c:169:5: warning: implicit declaration of function 'get_fpi_clk' [-Wimplicit-function-declaration]
     
739. serial_divs(CONFIG_BAUDRATE, get_fpi_clk(), &fdv, &uiReloadValue);
     
740. ^
     
741. mips-openwrt-linux-uclibc-ar crv libserial.a lq_asc.o
     
742. a - lq_asc.o
     
743. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/serial'
     
744. make -C drivers/twserial/
     
745. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/twserial'
     
746. mips-openwrt-linux-uclibc-ar crv libtws.a
     
747. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/twserial'
     
748. make -C drivers/usb/gadget/
     
749. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/usb/gadget'
     
750. mips-openwrt-linux-uclibc-ar crv libusb_gadget.a
     
751. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/usb/gadget'
     
752. make -C drivers/usb/host/
     
753. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/usb/host'
     
754. mips-openwrt-linux-uclibc-ar crv libusb_host.a
     
755. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/usb/host'
     
756. make -C drivers/usb/musb/
     
757. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/usb/musb'
     
758. mips-openwrt-linux-uclibc-ar crv libusb_musb.a
     
759. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/usb/musb'
     
760. make -C drivers/usb/phy/
     
761. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/usb/phy'
     
762. mips-openwrt-linux-uclibc-ar crv libusb_phy.a
     
763. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/usb/phy'
     
764. make -C drivers/video/
     
765. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/video'
     
766. mips-openwrt-linux-uclibc-ar crv libvideo.a
     
767. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/video'
     
768. make -C drivers/watchdog/
     
769. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/watchdog'
     
770. mips-openwrt-linux-uclibc-ar crv libwatchdog.a
     
771. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/drivers/watchdog'
     
772. make -C common/
     
773. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/common'
     
774. make[5]: Leaving directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/common'
     
775. make[5]: Entering directory `/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/common'
     
776. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
777. -o cmd_boot.o cmd_boot.c -c
     
778. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
779. -o cmd_bootm.o cmd_bootm.c -c
     
780. In file included from cmd_bootm.c:37:0:
     
781. /home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include/linux/ctype.h:18:15: warning: array '_ctype' assumed to have one element [enabled by default]
     
782. unsigned char _ctype[];
     
783. ^
     
784. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
785. -o cmd_echo.o cmd_echo.c -c
     
786. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
787. -o cmd_help.o cmd_help.c -c
     
788. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
789. -o cmd_load.o cmd_load.c -c
     
790. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
791. -o cmd_mem.o cmd_mem.c -c
     
792. cmd_mem.c: In function 'do_mem_loop':
     
793. cmd_mem.c:481:25: warning: variable 'junk' set but not used [-Wunused-but-set-variable]
     
794. ulong addr, length, i, junk;
     
795. ^
     
796. mips-openwrt-linux-uclibc-gcc -g -Os -fomit-frame-pointer -D__KERNEL__ -DTEXT_BASE=0xA0400000 -I/home/paldier/k3c/UGW-7.1.1/build_dir/target-mips_mips32_uClibc-0.9.33.2_grx350_1600_mr_eth_rt_711/linux-lantiq_xrx500/u-boot-2010.06/include -fno-builtin -ffreestanding -nostdinc -isystem /home/paldier/k3c/UGW-7.1.1/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/lib/gcc/mips-openwrt-linux-uclibc/4.8.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=r1004kc -mno-dsp -mno-mips3d -Wall -Wstrict-prototypes -fno-stack-protector \
     
797. -o cmd_mtdparts.o cmd_mtdparts.c -c
     
798. cmd_mtdparts.c: In function 'part_validate':
     
799. cmd_mtdparts.c:395:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'u64' [-Wformat=]
     
800. id->mtd_id, part->offset, id->size);
     
801. ^
     
802. 
     

复制代码

jbzzz

paldier 发表于 2018-1-13 20:10
测试下那个蓝洞固件吧，看看能启动到哪里，应该在读取nvram之前都是正常的

昨天刷过，如下

1. U-Boot 2010.06-dirty-LANTIQ-v-2.3.144-K3C (Jan 13 2018 - 11:48:39)
   
2. 
   
3. interAptiv
   
4. cps cpu/ddr run in 800/666 Mhz
   
5. DRAM:  224 MiB
   
6. NAND:  NAND device: Manufacturer ID: 0x98, Chip ID: 0xd1 (Toshiba NAND 128MiB 3,3V 8-bit)
   
7. 128 MiB
   
8. Bad block table found at page 65472, version 0x01
   
9. Bad block table found at page 65408, version 0x01
   
10. In:    serial
    
11. Out:   serial
    
12. Err:   serial
    
13. Net:   multi type
    
14. Internal phy firmware version: 0x8547
    
15. GRX500 Switch
    
16. 
    
17. Type "run flash_nfs" to mount root filesystem over NFS
    
18. 
    
19. Hit any key to stop autoboot:  5  4  3  2  1  0
    
20. Creating 1 MTD partitions on "nand0":
    
21. 0x000001340000-0x000007f40000 : "mtd=8"
    
22. UBI: attaching mtd1 to ubi0
    
23. UBI: physical eraseblock size:   131072 bytes (128 KiB)
    
24. UBI: logical eraseblock size:    126976 bytes
    
25. UBI: smallest flash I/O unit:    2048
    
26. UBI: VID header offset:          2048 (aligned 2048)
    
27. UBI: data offset:                4096
    
28. UBI: attached mtd1 to ubi0
    
29. UBI: MTD device name:            "mtd=8"
    
30. UBI: MTD device size:            108 MiB
    
31. UBI: number of good PEBs:        864
    
32. UBI: number of bad PEBs:         0
    
33. UBI: max. allowed volumes:       128
    
34. UBI: wear-leveling threshold:    4096
    
35. UBI: number of internal volumes: 1
    
36. UBI: number of user volumes:     6
    
37. UBI: available PEBs:             252
    
38. UBI: total number of reserved PEBs: 612
    
39. UBI: number of PEBs reserved for bad PEB handling: 8
    
40. UBI: max/mean erase counter: 19/1
    
41. Volume bootcoreA found at volume id 6
    
42. read 0 bytes from volume 6 to a0400000(buf address)
    
43. Read [2158592] bytes
    
44. Volume kernelA found at volume id 0
    
45. read 0 bytes from volume 0 to 80800000(buf address)
    
46. Read [2920448] bytes
    
47. ## Booting kernel from Legacy Image at 80800000 ...
    
48.    Image Name:   MIPS LTQCPE Linux-3.10.104
    
49.    Created:      2018-01-12   5:15:39 UTC
    
50.    Image Type:   MIPS Linux Kernel Image (lzma compressed)
    
51.    Data Size:    2883520 Bytes = 2.7 MiB
    
52.    Load Address: a0020000
    
53.    Entry Point:  a002df00
    
54.    Verifying Checksum ... OK
    
55.    Uncompressing Kernel Image ... OK
    
56. 
    
57. Starting kernel ...
    
58. 
    
59. [    0.000000] Initializing cgroup subsys cpu
    
60. 
    
61. [    0.000000] Linux version 3.10.104 (paldier@paldier-VirtualBox) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 15.05_ltq) ) #4 SMP Fri Jan 12 12:30:46 CST 2018
    
62. 
    
63. [    0.000000] TLBINV/F supported, config4=0xc0000000
    
64. 
    
65. [    0.000000] TLBINV/F supported, config4=0xc0000000
    
66. 
    
67. [    0.000000] SoC: GRX500 rev 1.2
    
68. 
    
69. [    0.000000] GCMP present
    
70. 
    
71. [    0.000000] L2-only SYNC available
    
72. 
    
73. [    0.000000] bootconsole [early0] enabled
    
74. 
    
75. [    0.000000] CPU0 revision is: 0001a120 (MIPS interAptiv)
    
76. 
    
77. [    0.000000] Enhanced Virtual Addressing (EVA 1GB) activated
    
78. 
    
79. [    0.000000] IO: BASE = 0xa0000000, SHIFT = 0x10000000, SIZE = 0x10000000
    
80. 
    
81. [    0.000000] GCMP base addr = 0xb2300000, CLB: ResetExcBase = 0xbfc00000, ResetExcExtBase = 0x4ff00001
    
82. 
    
83. [    0.000000] BEV Overlay segment = 0xb0000000, size = 0x10000000
    
84. 
    
85. [    0.000000] segctr0 2d0a0a segctr1 40d020a segctr2 38004d
    
86. 
    
87. [    0.000000] MIPS: machine is Merlin for K3C
    
88. 
    
89. [    0.000000] CMP IOCU detected
    
90. 
    
91. [    0.000000] Hardware DMA cache coherency disabled
    
92. 
    
93. [    0.000000] Determined physical RAM map:
    
94. 
    
95. [    0.000000]  memory: 0e000000 [url=home.php?mod=space&uid=162986]@[/url] 20000000 (usable)
    
96. 
    
97. [    0.000000] User-defined physical RAM map:
    
98. 
    
99. [    0.000000]  memory: 0e000000 @ 20000000 (usable)
    
100. 
     
101. [    0.000000] Initrd not found or empty - disabling initrd
     
102. 
     
103. [    0.000000] reserving 18874368 bytes @ 6800b3c0 for CBM
     
104. 
     
105. [    0.000000] reserving 8388608 bytes @ 6920b3c0 for CBM
     
106. 
     
107. [    0.000000] Zone ranges:
     
108. 
     
109. [    0.000000]   DMA      [mem 0x20000000-0x27ffffff]
     
110. 
     
111. [    0.000000]   Normal   [mem 0x28000000-0x2dffffff]
     
112. 
     
113. [    0.000000] Movable zone start for each node
     
114. 
     
115. [    0.000000] Early memory node ranges
     
116. 
     
117. [    0.000000]   node   0: [mem 0x20000000-0x2dffffff]
     
118. 
     
119. [    0.000000] Detected 3 available secondary CPU(s)
     
120. 
     
121. [    0.000000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
     
122. 
     
123. [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
     
124. 
     
125. [    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
     
126. 
     
127. [    0.000000] PERCPU: Embedded 7 pages/cpu @69bcf000 s7936 r8192 d12544 u32768
     
128. 
     
129. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 56896
     
130. 
     
131. [    0.000000] Kernel command line: ubi.mtd=system_sw rootfsname=rootfsA ro rootfstype=squashfs do_overlay console=ttyLTQ0,115200 ethaddr=00:E0:92:00:01:40 panic=1 mtdparts=17c00000.nand-parts:1m(uboot),256k(ubootconfigA),256k(ubootconfigB),256k(gphyfirmware),1m(calibration),16m(bootcore),256k(pro_info),256k(dev_info),108m(system_sw),-(res) init=/etc/preinit active_bank=A update_chk=0 maxcpus=4 pci=pcie_bus_perf pcie_force_gen1=on ethwan= ubootver=U-Boot-2010.06-dirty-LANTIQ-v-2.3.144-K3C mem=224M@512M
     
132. 
     
133. [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
     
134. 
     
135. [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
     
136. 
     
137. [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
     
138. 
     
139. [    0.000000] Writing ErrCtl register=00000000
     
140. 
     
141. [    0.000000] Readback ErrCtl register=00000000
     
142. 
     
143. [    0.000000] allocated 458752 bytes of page_cgroup
     
144. 
     
145. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
     
146. 
     
147. [    0.000000] Memory: 190280k/229376k available (6295k kernel code, 39096k reserved, 1669k data, 288k init, 0k highmem)
     
148. 
     
149. [    0.000000] Hierarchical RCU implementation.
     
150. 
     
151. [    0.000000] NR_IRQS:527
     
152. 
     
153. [    0.000000] GIC: present
     
154. 
     
155. [    0.000000] EIC: off
     
156. 
     
157. [    0.000000] GIC map size 263
     
158. 
     
159. [    0.000000] gic: revision 3.0
     
160. 
     
161. [    0.000000] CPU0: c0 status register 1100fc00
     
162. 
     
163. [    0.000000] of_gic_init init done
     
164. 
     
165. [    0.000000] CPU Clock: 800000000Hz  mips_hpt_frequency 400000000Hz
     
166. 
     
167. [    0.000000] CBM Clock: 600000000Hz DDR Clock: 666666666Hz NGI Clock: 300000000Hz
     
168. 
     
169. [    0.000000] clock event init done !
     
170. 
     
171. [    0.000000] gptu_setup_clocksource: done !
     
172. 
     
173. [    0.000000] Calibrating delay loop... 513.63 BogoMIPS (lpj=2568192)
     
174. 
     
175. [    0.070000] pid_max: default: 32768 minimum: 301
     
176. 
     
177. [    0.070000] Mount-cache hash table entries: 512
     
178. 
     
179. [    0.080000] Initializing cgroup subsys memory
     
180. 
     
181. [    0.090000] size of core = 336, MAXCORE = 2 , MAXCPU = 4, MAXTCS = 6 MAX_VPE = 2
     
182. 
     
183. [    0.090000] [update_DB_from_DT]:[363], cpuid = 0 name = LINUX
     
184. 
     
185. [    0.100000] [update_DB_from_DT]:[363], cpuid = 1 name = LINUX
     
186. 
     
187. [    0.100000] [update_DB_from_DT]:[363], cpuid = 2 name = LINUX
     
188. 
     
189. [    0.110000] [update_DB_from_DT]:[363], cpuid = 3 name = MPEFW
     
190. 
     
191. [    0.110000] [vmb_check_IBL_fw_msg]:[331] vpet[j].bl_status = 2 , cpu = 1
     
192. 
     
193. [    0.120000] [vmb_check_IBL_fw_msg]:[331] vpet[j].bl_status = 2 , cpu = 2
     
194. 
     
195. [    0.120000] [vmb_check_IBL_fw_msg]:[331] vpet[j].bl_status = 2 , cpu = 3
     
196. 
     
197. [    0.130000]
     
198. 
     
199. [    0.130000] Initial ITC_Address_Map0 00000000
     
200. 
     
201. [    0.130000]
     
202. 
     
203. def ITC_Address_Map1 01200000
     
204. 
     
205. new ITC_Address_Map1 0120fc00
     
206. 
     
207. def ITC_Address_Map0 00000000
     
208. 
     
209. new ITC_Address_Map0 1c300001
     
210. 
     
211. ITC Init done on Core 0 on CPU 0 !!!
     
212. 
     
213. [    0.150000] [vmb_cpu_alloc]:[624] CPU vpet.cpu_status = 11
     
214. 
     
215. [    0.150000] [vmb_cpu_start]:[842]  vmb_fw_msg_t = a00000b8 cpu = 1 vmb_msg_size = b0 sizeof(VMB_fw_msg_t) = 168 sizeof(FW_vmb_msg_t) = 8 !!!!
     
216. 
     
217. [gic_trigger]:[551] VMB_CPU_IPI1 - 20 CPU = 1
     
218. 
     
219. 
     
220. Outside WAIT got IPI interrupt to launch from cpu 01
     
221. 
     
222. MSG_ID = 01[    0.160000] [vmb_cpu_start]:[881] WAITING FOR RESPONSE vpet->v_wq.wakeup_vpe = 0 !!!!
     
223. 
     
224. [    0.160000] TLBINV/F supported, config4=0xc0000000
     
225. 
     
226. [    0.160000] TLBINV/F supported, config4=0xc0000000
     
227. 
     
228. [    0.160000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
     
229. 
     
230. [    0.160000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
     
231. 
     
232. [    0.160000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
     
233. 
     
234. [    0.160000] IO: BASE = 0xa0000000, SHIFT = 0x10000000, SIZE = 0x10000000
     
235. 
     
236. [    0.160000] GCMP base addr = 0xb2300000, CLB: ResetExcBase = 0xbfc00000, ResetExcExtBase = 0x4ff00001
     
237. 
     
238. [    0.160000] BEV Overlay segment = 0xb0000000, size = 0x10000000
     
239. 
     
240. [    0.160000]
     
241. 
     
242. [    0.160000] Initial ITC_Address_Map0 1c300001
     
243. 
     
244. [    0.160000] ITC Memory is already initialised for Core 0 at address 1c300000 !!![    0.160000] CPU1 revision is: 0001a120 (MIPS interAptiv)
     
245. 
     
246. 
     
247. 
     
248. [    0.220000] [vmb_cpu_active]:[268] action = 10 , cpu = 1
     
249. 
     
250. [    0.220000] [vmb_cpu_start]:[898] OUTSIDE WAIT wakeup_vpe = 1 vpet->fw_vmb.status = 1 ACK = 1 cpu = 1 ret1 = 9995 vpet = 60833a94, smp_processor_id() = 0 , vpet->fw_vmb =60833ac0 !!!!
     
251. 
     
252. [    0.220000]  [vmb_cpu_start]:[905]  ret = 1
     
253. 
     
254. 
     
255. 
     
256. [    0.230000] Synchronize counters for CPU 1: done.
     
257. 
     
258. [    0.230000] GPTC clock event init on cpu: 1
     
259. 
     
260. [    0.230000] clock event init done !
     
261. 
     
262. [    0.240000] [vmb_cpu_alloc]:[624] CPU vpet.cpu_status = 11
     
263. 
     
264. [    0.240000] [vmb_cpu_start]:[842]  vmb_fw_msg_t = a0000168 cpu = 2 vmb_msg_size = b0 sizeof(VMB_fw_msg_t) = 168 sizeof(FW_vmb_msg_t) = 8 !!!!
     
265. 
     
266. [gic_trigger]:[555] VMB_CPU_IPI2 - 21 CPU = 2
     
267. 
     
268. 
     
269. Outside WAIT got IPI interrupt to launch from cpu 02
     
270. 
     
271. MSG_ID = 01[    0.250000] [vmb_cpu_start]:[881] WAITING FOR RESPONSE vpet->v_wq.wakeup_vpe = 0 !!!!
     
272. 
     
273. [    0.250000] TLBINV/F supported, config4=0xc0000000
     
274. 
     
275. [    0.250000] TLBINV/F supported, config4=0xc0000000
     
276. 
     
277. [    0.250000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
     
278. 
     
279. [    0.250000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
     
280. 
     
281. [    0.250000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
     
282. 
     
283. [    0.250000] IO: BASE = 0xa0000000, SHIFT = 0x10000000, SIZE = 0x10000000
     
284. 
     
285. [    0.250000] GCMP base addr = 0xb2300000, CLB: ResetExcBase = 0xbfc00000, ResetExcExtBase = 0x4ff00001
     
286. 
     
287. [    0.250000] BEV Overlay segment = 0xb0000000, size = 0x10000000
     
288. 
     
289. [    0.250000]
     
290. 
     
291. [    0.250000] Initial ITC_Address_Map0 00000000
     
292. 
     
293. [    0.250000]
     
294. 
     
295. [    0.250000] def ITC_Address_Map1 01200000
     
296. 
     
297. [    0.250000] new ITC_Address_Map1 0120fc00
     
298. 
     
299. [    0.250000] def ITC_Address_Map0 00000000
     
300. 
     
301. [    0.250000] new ITC_Address_Map0 1c300001
     
302. 
     
303. [    0.250000]  ITC Init done on Core 1 on CPU 2 !!!
     
304. 
     
305. [    0.250000] CPU2 revision is: 0001a120 (MIPS interAptiv)
     
306. 
     
307. 
     
308. 
     
309. [    0.310000] [vmb_cpu_active]:[268] action = 10 , cpu = 2
     
310. 
     
311. [    0.310000] [vmb_cpu_start]:[898] OUTSIDE WAIT wakeup_vpe = 1 vpet->fw_vmb.status = 1 ACK = 1 cpu = 2 ret1 = 9995 vpet = 60833b04, smp_processor_id() = 0 , vpet->fw_vmb =60833b30 !!!!
     
312. 
     
313. [    0.310000]  [vmb_cpu_start]:[905]  ret = 1
     
314. 
     
315. 
     
316. 
     
317. [    0.320000] Synchronize counters for CPU 2: done.
     
318. 
     
319. [    0.320000] GPTC clock event init on cpu: 2
     
320. 
     
321. [    0.320000] clock event init done !
     
322. 
     
323. [    0.330000] [smp_init]:[553] CPU3 shouldn't run LINUX as per DT (model) config
     
324. 
     
325. [    0.330000] Brought up 3 CPUs
     
326. 
     
327. [    0.350000] pinctrl core: initialized pinctrl subsystem
     
328. 
     
329. [    0.350000] regulator-dummy: no parameters
     
330. 
     
331. [    0.360000] NET: Registered protocol family 16
     
332. 
     
333. [    0.360000] [gpio_xrx500] { xrx500_gpio_init : 416 }XRX500 GPIO Driver, (C) 2014 Lantiq Deutschland Gmbh
     
334. 
     
335. [    0.370000] Resetting the switch and phy.
     
336. 
     
337. [    0.370000] dma-grx500 1e300000.dma: DMA3 base address be300000 chained_irq 77 irq_base 447
     
338. 
     
339. [    0.380000] dma-grx500 1e300000.dma: Init done - hw rev: A, ports: 1, channels: 64
     
340. 
     
341. [    0.390000] dma-grx500 1c100000.dma: DMA2TX base address bc100000 chained_irq 75 irq_base 399
     
342. 
     
343. [    0.400000] dma-grx500 1c100000.dma: Init done - hw rev: A, ports: 1, channels: 16
     
344. 
     
345. [    0.400000] dma-grx500 1c200000.dma: DMA2RX base address bc200000 chained_irq 76 irq_base 415
     
346. 
     
347. [    0.410000] dma-grx500 1c200000.dma: Init done - hw rev: A, ports: 1, channels: 32
     
348. 
     
349. [    0.420000] dma-grx500 1a100000.dma: DMA1TX base address ba100000 chained_irq 73 irq_base 351
     
350. 
     
351. [    0.430000] dma-grx500 1a100000.dma: Init done - hw rev: A, ports: 1, channels: 16
     
352. 
     
353. [    0.430000] dma-grx500 1a200000.dma: DMA1RX base address ba200000 chained_irq 74 irq_base 367
     
354. 
     
355. [    0.440000] dma-grx500 1a200000.dma: Init done - hw rev: A, ports: 1, channels: 12
     
356. 
     
357. [    0.450000] [gptu] { gptu_probe : 297 }dev id 16b00000.gptu
     
358. 
     
359. 
     
360. [    0.460000] [gptu] { clkdev_add_gptu : 239 }Memory Allocation suceeded
     
361. 
     
362. 
     
363. [    0.460000] [gptu] { clkdev_add_gptu : 239 }Memory Allocation suceeded
     
364. 
     
365. 
     
366. [    0.470000] [gptu] { clkdev_add_gptu : 239 }Memory Allocation suceeded
     
367. 
     
368. 
     
369. [    0.470000] [gptu] { clkdev_add_gptu : 239 }Memory Allocation suceeded
     
370. 
     
371. 
     
372. [    0.480000] gptu-xrx500 16b00000.gptu: gptu: 4 timers loaded
     
373. 
     
374. [    0.480000] gptu driver init successfully
     
375. 
     
376. 
     
377. [    0.490000] [gptu] { gptu_probe : 297 }dev id 16300000.gptu
     
378. 
     
379. 
     
380. [    0.490000] [gptu] { clkdev_add_gptu : 239 }Memory Allocation suceeded
     
381. 
     
382. 
     
383. [    0.500000] [gptu] { clkdev_add_gptu : 239 }Memory Allocation suceeded
     
384. 
     
385. 
     
386. [    0.500000] [gptu] { clkdev_add_gptu : 239 }Memory Allocation suceeded
     
387. 
     
388. 
     
389. [    0.510000] [gptu] { clkdev_add_gptu : 239 }Memory Allocation suceeded
     
390. 
     
391. 
     
392. [    0.510000] gptu-xrx500 16300000.gptu: gptu: 4 timers loaded
     
393. 
     
394. [    0.520000] gptu driver init successfully
     
395. 
     
396. 
     
397. [    0.520000] dma0-grx500 16e00000.dma: base address b6e00000 chained_irq 72 irq_base 335
     
398. 
     
399. [    0.530000] dma0-grx500 16e00000.dma: Init done - hw rev: A, ports: 4, channels: 16
     
400. 
     
401. [    0.530000] [pinctrl_xrx500] { pinctrl_xrx500_probe : 1341 }disabling the BBSPI at top-mux
     
402. 
     
403. [    0.540000] [pinctrl_xrx500] { pinctrl_xrx500_probe : 1364 }SoC id is - 32,default XRX500 pinmuxing will used
     
404. 
     
405. [    0.550000] pinctrl-xrx500 pinctrl.6: Init done
     
406. 
     
407. [    0.560000] !!!!!!! WAVE400 system registeration on AHB
     
408. 
     
409. [    0.560000] MTLK_MEM_BAR1_START is 14000000
     
410. 
     
411. [    0.570000] MTLK_MEM_BAR1_END is 147fffff
     
412. 
     
413. [    0.570000] MTLK_WIRELESS_IRQ_IN_INDEX is 26
     
414. 
     
415. [    0.570000] [cbm] { cbm_xrx500_probe : 5610 }2
     
416. 
     
417. 
     
418. [    0.580000] Initializing TMU with Base Address=be700000: ...
     
419. 
     
420. [    0.580000] TMU Initialization Done
     
421. 
     
422. [    0.590000] [cbm] { init_fsqm_buf_standard : 657 }init fsqm std successfully
     
423. 
     
424. [    0.590000] [cbm] { init_fsqm_buf_jumbo : 700 }init fsqm jbo successfully
     
425. 
     
426. [    0.600000] [cbm] { init_fsqm : 583 }fsqm init successfully
     
427. 
     
428. [    0.600000] [cbm] { init_cbm_basic : 773 }init basic CBM successfully
     
429. 
     
430. [    0.610000] [cbm] { cbm_hw_init : 1947 }CBM HW init
     
431. 
     
432. [    0.610000] [cbm] { setup_DMA_p2p : 4978 }setup_DMA_p2p executed
     
433. 
     
434. [    0.620000] [cbm] { configure_ports : 5428 }configure_ports 7 1 0 0 8 2
     
435. 
     
436. 
     
437. [    0.620000] [cbm] { configure_ports : 5395 }configure_ports 7 1 16 1 8 2
     
438. 
     
439. 
     
440. [    0.630000] [cbm] { configure_ports : 5428 }configure_ports 8 1 15 0 8 2
     
441. 
     
442. 
     
443. [    0.630000] [cbm] { configure_ports : 5395 }configure_ports 8 1 31 1 8 2
     
444. 
     
445. 
     
446. [    0.640000] [cbm] { configure_ports : 5515 }configure_ports wrong key
     
447. 
     
448. [    0.640000] [cbm] { init_cbm_ls : 1126 }Load spreader init successfully
     
449. 
     
450. [    0.650000] [cbm] { cbm_xrx500_probe : 5673 }CBM Clock: 600000000Hz
     
451. 
     
452. [    0.650000] [cbm] { cbm_xrx500_probe : 5675 }EQM delay Enabled
     
453. 
     
454. [    0.660000] [cbm] { cbm_xrx500_probe : 5741 }CBM: Init Done !!
     
455. 
     
456. [    0.660000] PCI host bridge /ssx3@18000000/pcie@900000 ranges:
     
457. 
     
458. [    0.670000]  MEM 0x00000000b8000000..0x00000000baffffff
     
459. 
     
460. [    0.670000]   IO 0x00000000bb800000..0x00000000bb8fffff
     
461. 
     
462. [    0.780000] PCIe LCPLL SSC Mode Enabled
     
463. 
     
464. [    1.280000] pcie_wait_phy_link_up port 0 timeout
     
465. 
     
466. [    1.290000] pcie_rc_initialize port 0 link up failed!!!!!
     
467. 
     
468. [    1.290000] ltq-pcie: probe of 18900000.pcie failed with error -5
     
469. 
     
470. [    1.300000] PCI host bridge /ssx3@18000000/pcie@400000 ranges:
     
471. 
     
472. [    1.300000]  MEM 0x00000000b4000000..0x00000000b6ffffff
     
473. 
     
474. [    1.310000]   IO 0x00000000b7800000..0x00000000b78fffff
     
475. 
     
476. [    1.610000] Lantiq PCIe Root Complex Port 1 Init Done
     
477. 
     
478. [    1.620000] PCI host bridge /ssx3@18000000/pcie@E00000 ranges:
     
479. 
     
480. [    1.620000]  MEM 0x00000000bc000000..0x00000000beffffff
     
481. 
     
482. [    1.630000]   IO 0x00000000bf800000..0x00000000bf8fffff
     
483. 
     
484. [    2.230000] pcie_wait_phy_link_up port 2 timeout
     
485. 
     
486. [    2.240000] pcie_rc_initialize port 2 link up failed!!!!!
     
487. 
     
488. [    2.240000] ltq-pcie: probe of 18e00000.pcie failed with error -5
     
489. 
     
490. [    2.260000] bio: create slab <bio-0> at 0
     
491. 
     
492. [    2.270000] vgaarb: loaded
     
493. 
     
494. [    2.270000] Register xway nand done!
     
495. 
     
496. [    2.270000] usbcore: registered new interface driver usbfs
     
497. 
     
498. [    2.280000] usbcore: registered new interface driver hub
     
499. 
     
500. [    2.280000] usbcore: registered new device driver usb
     
501. 
     
502. [    2.290000] i2c-lantiq 16a00000.i2c: pins are not configured from the driver
     
503. 
     
504. [    2.290000] i2c-lantiq 16a00000.i2c: version 1.01
     
505. 
     
506. [    2.320000] i2c-lantiq 16a00000.i2c: timeout waiting for bus ready
     
507. 
     
508. [    2.340000] i2c-lantiq 16a00000.i2c: timeout waiting for bus ready
     
509. 
     
510. [    2.360000] i2c-lantiq 16a00000.i2c: timeout waiting for bus ready
     
511. 
     
512. [    2.360000] 1V15VDD: 900 <--> 1200 mV at 1790 mV normal standby
     
513. 
     
514. [    2.390000] i2c-lantiq 16a00000.i2c: timeout waiting for bus ready
     
515. 
     
516. [    2.410000] i2c-lantiq 16a00000.i2c: timeout waiting for bus ready
     
517. 
     
518. [    2.430000] i2c-lantiq 16a00000.i2c: timeout waiting for bus ready
     
519. 
     
520. [    2.450000] i2c-lantiq 16a00000.i2c: timeout waiting for bus ready
     
521. 
     
522. [    2.470000] i2c-lantiq 16a00000.i2c: timeout waiting for bus ready
     
523. 
     
524. [    2.470000] try to register spd_mon driver
     
525. 
     
526. [    2.480000] spdmon 16080110.speedm: base address: 0xb6080110       
     
527. 
     
528. [    2.480000] spdmon 16080110.speedm: PHY base address: 0x16080110
     
529. 
     
530. [    2.490000] device number :253
     
531. 
     
532. [    2.490000] spdmon 16080110.speedm: spd_mon driver : init done !!
     
533. 
     
534. [    2.500000] spd_mon driver registered
     
535. 
     
536. [    2.500000] PCI host bridge to bus 0000:00
     
537. 
     
538. [    2.510000] pci_bus 0000:00: root bus resource [mem 0xb4000000-0xb6ffffff]
     
539. 
     
540. [    2.520000] pci_bus 0000:00: root bus resource [io  0xb7800000-0xb78fffff]
     
541. 
     
542. [    2.520000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
     
543. 
     
544. [    2.530000] ltq-pcie 18400000.pcie: pcie_rc_class_fixup port 1: fixed pci host bridge to pci-pci bridge
     
545. 
     
546. [    2.540000] pci 0000:00:00.0: BAR 8: assigned [mem 0xb4000000-0xb47fffff]
     
547. 
     
548. [    2.550000] pci 0000:01:00.0: BAR 0: assigned [mem 0xb4000000-0xb47fffff]
     
549. 
     
550. [    2.560000] pci 0000:00:00.0: PCI bridge to [bus 01]
     
551. 
     
552. [    2.560000] pci 0000:00:00.0:   bridge window [mem 0xb4000000-0xb47fffff]
     
553. 
     
554. [    2.570000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
     
555. 
     
556. [    2.570000] pci 0000:00:00.0: PCI-E Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256
     
557. 
     
558. [    2.580000] pci 0000:01:00.0: PCI-E Max Payload Size set to  128/ 128 (was  128), Max Read Rq  128
     
559. 
     
560. [    2.590000] NET: Registered protocol family 8
     
561. 
     
562. [    2.600000] NET: Registered protocol family 20
     
563. 
     
564. [    2.600000] cfg80211: Calling CRDA to update world regulatory domain
     
565. 
     
566. [    2.610000] Switching to clocksource gptc-timer
     
567. 
     
568. [    2.640000] i2c-lantiq 16a00000.i2c: timeout waiting for bus ready
     
569. 
     
570. [    2.660000] i2c-lantiq 16a00000.i2c: timeout waiting for bus ready
     
571. 
     
572. [    2.680000] i2c-lantiq 16a00000.i2c: timeout waiting for bus ready
     
573. 
     
574. [    2.700000] i2c-lantiq 16a00000.i2c: timeout waiting for bus ready
     
575. 
     
576. [    2.720000] i2c-lantiq 16a00000.i2c: timeout waiting for bus ready
     
577. 
     
578. [    2.740000] i2c-lantiq 16a00000.i2c: timeout waiting for bus ready
     
579. 
     
580. [    2.740000] ltq_regulator_cpufreq: rcf_debugfs_init is called
     
581. 
     
582. [    2.750000] NET: Registered protocol family 2
     
583. 
     
584. [    2.750000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
     
585. 
     
586. [    2.760000] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
     
587. 
     
588. [    2.770000] TCP: Hash tables configured (established 2048 bind 2048)
     
589. 
     
590. [    2.770000] TCP: reno registered
     
591. 
     
592. [    2.780000] UDP hash table entries: 256 (order: 1, 8192 bytes)
     
593. 
     
594. [    2.780000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
     
595. 
     
596. [    2.790000] NET: Registered protocol family 1
     
597. 
     
598. [    2.790000] RPC: Registered named UNIX socket transport module.
     
599. 
     
600. [    2.800000] RPC: Registered udp transport module.
     
601. 
     
602. [    2.800000] RPC: Registered tcp transport module.
     
603. 
     
604. [    2.810000] RPC: Registered tcp NFSv4.1 backchannel transport module.
     
605. 
     
606. [    2.810000] ltq-pcie 18400000.pcie: pcie_fixup_bridge port 1 : fixup host controller 0000:00:00.0 (1bef:0030)
     
607. 
     
608. [    2.830000] audit: initializing netlink socket (disabled)
     
609. 
     
610. [    2.830000] type=2000 audit(2.820:1): initialized
     
611. 
     
612. [    2.840000] VFS: Disk quotas dquot_6.5.2
     
613. 
     
614. [    2.840000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
     
615. 
     
616. [    2.850000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
     
617. 
     
618. [    2.850000] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
     
619. 
     
620. [    2.860000] msgmni has been set to 371
     
621. 
     
622. [    2.870000] io scheduler noop registered
     
623. 
     
624. [    2.870000] io scheduler deadline registered (default)
     
625. 
     
626. [    2.880000] io scheduler cfq registered
     
627. 
     
628. [    2.880000] [vmb_yr_get]:[1362] CPU = 0, yri[i].yr_status = 1, yield_bits = 1 n_yr = 1 yri[i].cpu_id = 0
     
629. 
     
630. [    2.890000] [vmb_yr_get]:[1362] CPU = 1, yri[i].yr_status = 1, yield_bits = 2 n_yr = 1 yri[i].cpu_id = 1
     
631. 
     
632. [    2.900000] [vmb_yr_get]:[1362] CPU = 2, yri[i].yr_status = 1, yield_bits = 1 n_yr = 1 yri[i].cpu_id = 2
     
633. 
     
634. [    2.910000] UMT initialize called on processor: 1 !
     
635. 
     
636. [    2.920000] <umt_init>pmask addr = b2320494 and bit = 4
     
637. 
     
638. [    2.920000] [vmb_tc_alloc]:[938] CPU tct[i].tc_status = 1
     
639. 
     
640. [    2.930000] <umt_init>allocated TC num 2
     
641. 
     
642. [    2.930000] getmvpctrl = 2
     
643. 
     
644. [    2.930000] getvpectrl for target TC = 2
     
645. 
     
646. [    2.930000] gettcstatus = 8400
     
647. 
     
648. [    2.930000] tc is halted = 1
     
649. 
     
650. [    2.930000] gettcbind = 400001
     
651. 
     
652. [    2.930000] stack top = 6084cff0
     
653. 
     
654. [    2.930000] start address of TC = 602efe48
     
655. 
     
656. [    2.930000] current TC status = a400
     
657. 
     
658. [    2.930000] tc is unhalted = 0
     
659. 
     
660. [    2.930000] current mvp control = 1
     
661. 
     
662. [    2.930000] :::: UMT FLOW started :::::
     
663. 
     
664. [    2.970000] Yield setup passed for gptc_irq = 172
     
665. 
     
666. [    2.980000] setting the gptu rate to: 25000
     
667. 
     
668. [    2.980000] [gptu] { setrate : 154 }cpu_clk 200000000
     
669. 
     
670. 
     
671. [    2.980000] [gptu] { setrate : 158 }reload_counter_value 8000
     
672. 
     
673. 
     
674. [    2.990000] umt_init Timer 3A is running for UMT !
     
675. 
     
676. [    3.000000] UMT initialize success on processor: 1 !
     
677. 
     
678. [    3.000000] HW MCPY driver: Version: 1.1.0, Init Done !!
     
679. 
     
680. [    3.010000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
     
681. 
     
682. [    3.010000] lantiq,asc 16600000.serial: pins are not configured from the driver
     
683. 
     
684. [    3.020000] 16600000.serial: ttyLTQ0 at MMIO 0x16600000 (irq = 111) is a lantiq,asc
     
685. 
     
686. [    3.040000] console [ttyLTQ0] enabled, bootconsole disabled
     
687. [    3.040000] console [ttyLTQ0] enabled, bootconsole disabled
     
688. 
     
689. [    3.050000] Lantiq MIPSInterAptiv MPS driver, version 1.0.0.0, (c) 2006-2013 Lantiq Deutschland GmbH
     
690. [    3.060000] MPS: major Id 251
     
691. [    3.060000] Major Id is 250
     
692. [    3.060000] ICC driver registered
     
693. [    3.070000] sysrst_init: Trying to register System Reset Driver ...
     
694. [    3.070000] sysrst_pre_init: Detect InterAptiv CPU ...
     
695. [    3.080000] sysrst_init: Lantiq CPE GRX500 System driver version 1.0.0
     
696. [    3.080000] sysrst_init: GRX500 System Reset initialized successfully!
     
697. [    3.090000] brd: module loaded
     
698. [    3.090000] loop: module loaded
     
699. [    3.100000] Uniform Multi-Platform E-IDE driver
     
700. [    3.100000] ide-gd driver 1.18
     
701. [    3.110000] NAND device: Manufacturer ID: 0x98, Chip ID: 0xd1 (Toshiba NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
     
702. [    3.120000] Scanning device for bad blocks
     
703. [    3.240000] 10 cmdlinepart partitions found on MTD device 17c00000.nand-parts
     
704. [    3.250000] Creating 10 MTD partitions on "17c00000.nand-parts":
     
705. [    3.260000] 0x000000000000-0x000000100000 : "uboot"
     
706. [    3.260000] 0x000000100000-0x000000140000 : "ubootconfigA"
     
707. [    3.270000] 0x000000140000-0x000000180000 : "ubootconfigB"
     
708. [    3.270000] 0x000000180000-0x0000001c0000 : "gphyfirmware"
     
709. [    3.280000] 0x0000001c0000-0x0000002c0000 : "calibration"
     
710. [    3.280000] 0x0000002c0000-0x0000012c0000 : "bootcore"
     
711. [    3.290000] 0x0000012c0000-0x000001300000 : "pro_info"
     
712. [    3.290000] 0x000001300000-0x000001340000 : "dev_info"
     
713. [    3.300000] 0x000001340000-0x000007f40000 : "system_sw"
     
714. [    3.300000] 0x000007f40000-0x000008000000 : "res"
     
715. [    3.310000] Gluebi: Found kernel commandline option 'rootfsname=rootfsA'
     
716. [    3.320000] spi-lantiq-ssc 16800000.spi: master is unqueued, this is deprecated
     
717. [    3.320000] Lantiq SoC SPI controller rev 9 (TXFS 32, RXFS 32, DMA 1)
     
718. [    3.330000] [ltq_ssc] { ifx_ssc_init : 3802 }[ifx_ssc_init] force ifx_ssc_cs_low to PORT 1
     
719. 
     
720. [    3.340000] [ltq_ssc] { ifx_ssc_init : 3803 }[ifx_ssc_init] force ifx_ssc_cs_high to PORT 1
     
721. 
     
722. [    3.350000] [ltq_ssc] { ifx_ssc_init : 3807 }ifx_ssc_init ifx_ssc_init_count 1
     
723. 
     
724. [    3.350000] [ltq_ssc] { ifx_ssc_init : 3930 }port name ltq_ssc1
     
725. [    3.360000] [ltq_ssc] { ifx_ssc_init : 4026 }Lantiq SoC SSC controller rev 9 (TXFS 32, RXFS 32, DMA 1)
     
726. [    3.370000] [ltq_ssc] { ifx_sscAllocConnection : 3511 }ifx_sscAllocConnection ssc driver must be loaded first!
     
727. [    3.380000] ifx_spi_flash_init: failed to register sflash
     
728. [    3.390000] IMQ driver loaded successfully. (numdevs = 3, numqueues = 1)
     
729. [    3.390000]         Hooking IMQ after NAT on PREROUTING.
     
730. [    3.400000]         Hooking IMQ after NAT on POSTROUTING.
     
731. [    3.400000] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
     
732. [    3.410000] Lantiq VRX318 Version 3.0.0
     
733. [    3.410000] LTQ ETH SWITCH API, Version 3.0.2.
     
734. [    3.420000] SWAPI: Registered char device [switch_api] with major no [81]
     
735. [    3.420000] drivers/net/ethernet/lantiq/switch-api/gsw_flow_core.c:get_gsw_hw_cap:1717 (pnum:7)
     
736. [    3.430000] drivers/net/ethernet/lantiq/switch-api/gsw_flow_core.c:get_gsw_hw_cap:1784 (gswdev->gipver:48)
     
737. [    3.440000] LTQ ETH SWITCH API, Version 3.0.2.
     
738. [    3.450000] drivers/net/ethernet/lantiq/switch-api/gsw_flow_core.c:get_gsw_hw_cap:1717 (pnum:2)
     
739. [    3.460000] drivers/net/ethernet/lantiq/switch-api/gsw_flow_core.c:get_gsw_hw_cap:1784 (gswdev->gipver:48)
     
740. [    3.470000] gphy_driver_init: fw_mode:11G-FW, no of phys:5, mode:0
     
741. [    3.480000] [datapath_loopeth_dev] { dp_loop_eth_dev_init : 1686 }Loading loop_net_dev driver ......
     
742. [    3.480000] [datapath_loopeth_dev] { dp_loop_eth_dev_init : 1692 }dp_loop_eth_dev_init Succeeded!
     
743. [    3.500000] [datapath_coc] { dp_coc_new_stat_req : 803 }COC is not initialized yet in DP
     
744. [    3.500000] dp init done
     
745. [    3.510000] lro_sram_membase_res0 from DT: a2013000
     
746. [    3.510000] ltq_toe_membase: e2000000 and lro_sram_membase_res0: e2013000
     
747. [    3.520000] TOE Init Done !!
     
748. [    3.520000] PPP generic driver version 2.4.2
     
749. [    3.530000] PPP BSD Compression module registered
     
750. [    3.530000] PPP MPPE Compression module registered
     
751. [    3.530000] NET: Registered protocol family 24
     
752. [    3.540000] p p t p driver version 0.8.5
     
753. [    3.540000] ltq-dwc3-core 1a300000.usb: no usb3 phy configured
     
754. [    3.550000] platform 1a300000.usb: Driver ltq-dwc3-core requests probe deferral
     
755. [    3.560000] ltq-dwc3-core 1a500000.usb: no usb3 phy configured
     
756. [    3.560000] platform 1a500000.usb: Driver ltq-dwc3-core requests probe deferral
     
757. [    3.570000] mousedev: PS/2 mouse device common for all mice
     
758. [    3.580000] i2c-lantiq 16a00000.i2c: Register I2CCOCDRV to CPUFREQ.
     
759. [    3.600000] i2c-lantiq 16a00000.i2c: timeout waiting for bus ready
     
760. [    3.620000] i2c-lantiq 16a00000.i2c: timeout waiting for bus ready
     
761. [    3.620000] ina2xx 0-0040: pm: ina219, railname:  PWR_12V, Rshunt: 10000 uOhm
     
762. [    3.630000] [gptu] { setrate : 154 }cpu_clk 200000000
     
763. 
     
764. [    3.630000] [gptu] { setrate : 158 }reload_counter_value 1
     
765. 
     
766. [    3.640000] gpio-sso-xrx500 16d00000.sso: pins are not configured from the driver
     
767. [    3.650000] gpio-sso-xrx500 16d00000.sso: Init done
     
768. [    3.650000] Device IRQ: 97 line: 100
     
769. [    3.650000] GlobalControl97_Capabilities_Get
     
770. [    3.660000] EIP202: PEs=1 rings=4 64-bit=No, fill level extension=No
     
771. [    3.660000] CF size=4 RF size=3 DMA len = 10 Align=0 HDW=0 HostIfc=3
     
772. [    3.670000] EIP96 options:
     
773. [    3.670000] AES: Yes with CFB/OFB: Yes Fast: Yes
     
774. [    3.670000] DES: Yes with CFB/OFB: Yes Fast: No
     
775. [    3.670000] ARCFOUR level: 3
     
776. [    3.670000] MD5: Yes SHA1: Yes Fast: Yes SHA256: Yes SHA512: Yes
     
777. [    3.670000] (X)CBC-MAC: Yes Fast: Yes All key sizes: No GHASH Yes
     
778. [    3.700000] EIP97 options: PEs=1, In Dbuf size=6 In Tbuf size=5, Out Dbuf size=6, Out Tbuf size=4,
     
779. [    3.700000] Token Generator: No, Transform Record Cache: No
     
780. [    3.710000] EIP206 options: PE type=0 InClassifier=0 OutClassifier=0 MAC chans=0
     
781. [    3.710000] InDBuf=0kB InTBuf=0kB OutDBuf=0kB OutTBuf=0kB
     
782. [    3.730000] Global EIP-97 capabilities: EIP-97 v1.2p1  with EIP-202 v1.3p0 and EIP-96 v2.2p3, #PE=01 #rings=04
     
783. [    3.740000] Global Status of the EIP-97
     
784. [    3.740000] Packet Engine 0 Status
     
785. [    3.740000] DFE Status: CD FIFO Words: 0, CDR ID: 15, DMA size: 0
     
786. [    3.740000] AtDMA busy: false, DataDMA busy: false, DMA err: false
     
787. [    3.760000] DSE Status: RD FIFO Words: 0, RDR ID: 15, DMA size: 0
     
788. [    3.760000] Data flush  busy: false, DataDMA busy: false, DMA err: false
     
789. [    3.770000] Token Status: Active: 0, loc available: true
     
790. [    3.770000] res available: false, read active: false, ccache active: false
     
791. [    3.770000] cntx fetch: false, res cntx: false
     
792. [    3.770000] processing held: true, busy: false
     
793. [    3.790000] Context Status: Err mask: 0000, Available: 0
     
794. [    3.790000] Active cntx: false, next cntx: false, result cntx: false Err recov: false
     
795. [    3.800000] Interrupt Status: input DMA err: false, output DMA err false
     
796. [    3.800000] pkt proc err: false, pkt timeout: false, f a t a l err: false, PE int out: false
     
797. [    3.800000] inp DMA enable: false, outp DMA enable false, pkt proc enable: false
     
798. [    3.800000] pkt timeout enable: false, f a t a l enable: false,PE int out enable: false
     
799. [    3.830000] Output Transfer Status: availabe: 71, min: 8, max: 64, size mask: 252
     
800. [    3.840000] PRNG Status: busy: true, res ready: false
     
801. [    3.850000] Adapter_Lock_Alloc: Lock = spinlock
     
802. [    3.850000] Adapter_Lock_Alloc: Lock = spinlock
     
803. [    3.850000] Adapter_PECDev_Init: CDR fetch size 0x8, thresh 0x6, HDW=0, CFsize=4
     
804. [    3.860000] Adapter_PECDev_Init: RDR fetch size 0x8, thresh 0x2, RFsize=3
     
805. [    3.870000] Status of CDR/RDR interface 0
     
806. [    3.870000] CDR Status: DMA err: false, err: false: ovf/under err: false
     
807. [    3.870000] Threshold int: false, timeout int: false, FIFO count: 16
     
808. [    3.890000] RDR Status: DMA err: false, err: false: ovf/under err: false
     
809. [    3.890000] Buf ovf: false, Descriptor ovf false
     
810. [    3.890000] Threshold int: false, timeout int: false, FIFO count: 8
     
811. [    3.900000] LTQ Crypto Hardware Initialized ..
     
812. [    3.910000] LTQ crypto driver version: 1.2.25
     
813. [    3.910000] u32 classifier
     
814. [    3.920000]     Performance counters on
     
815. [    3.920000]     input device check on
     
816. [    3.920000]     Actions configured
     
817. [    3.930000] nf_conntrack version 0.5.0 (2973 buckets, 11892 max)
     
818. [    3.930000] nf_conntrack_rtsp v0.6.21 loading
     
819. [    3.940000] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
     
820. [    3.940000] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
     
821. [    3.950000] xt_time: kernel timezone is -0000
     
822. [    3.950000] ipip: IPv4 over IPv4 tunneling driver
     
823. [    3.960000] gre: GRE over IPv4 demultiplexor driver
     
824. [    3.960000] nf_nat_rtsp v0.6.21 loading
     
825. [    3.970000] ip_tables: (C) 2000-2006 Netfilter Core Team
     
826. [    3.970000] TCP: cubic registered
     
827. [    3.980000] Initializing XFRM netlink socket
     
828. [    3.980000] NET: Registered protocol family 10
     
829. [    3.990000] ip6_tables: (C) 2000-2006 Netfilter Core Team
     
830. [    3.990000] NET: Registered protocol family 17
     
831. [    3.990000] NET: Registered protocol family 15
     
832. [    4.000000] Bridge firewalling registered
     
833. [    4.000000] lec:lane_module_init: lec.c: initialized
     
834. [    4.010000] mpoa:atm_mpoa_init: mpc.c: initialized
     
835. [    4.010000] KOAM is loaded successfully.
     
836. [    4.020000] l2tp_core: L2TP core driver, V2.0
     
837. [    4.020000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
     
838. [    4.030000] l2tp_netlink: L2TP netlink interface
     
839. [    4.030000] 8021q: 802.1Q VLAN Support v1.8
     
840. [    4.040000] regulator-dummy: disabling
     
841. [    5.200000] UBI: attaching mtd8 to ubi0
     
842. [    7.190000] UBI: scanning is finished
     
843. [    7.220000] UBI: attached mtd8 (name "system_sw", size 108 MiB) to ubi0
     
844. [    7.220000] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
     
845. [    7.230000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
     
846. [    7.240000] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
     
847. [    7.240000] UBI: good PEBs: 864, bad PEBs: 0, corrupted PEBs: 0
     
848. [    7.250000] UBI: user volume: 6, internal volumes: 1, max. volumes count: 128
     
849. [    7.260000] UBI: max/mean erase counter: 19/1, WL threshold: 4096, image sequence number: 0
     
850. [    7.260000] UBI: available PEBs: 240, total reserved PEBs: 624, PEBs reserved for bad PEB handling: 20
     
851. [    7.270000] UBI: background thread "ubi_bgt0d" started, PID 530
     
852. [    7.280000] Gluebi: mtd 'rootfsA' set to be root filesystem
     
853. [    7.280000] drivers/rtc/hctosys.c: unable to open rtc [    7.310000] VFS: Mounted root (squashfs filesystem) readonly on device 31:11.
     
854. [    7.310000] Freeing unused memory: 288k freed
     
855. [    7.330000] Failed to execute /etc/preinit.  Attempting defaults...
     
856. /dev/nvram: No such file or directory
     
857. /dev/nvram: No such device or address
     
858. [    8.950000] dev_nvram_init(): nvram MTD partition not found!
     
859. BLUECAVE: init gpio
     
860. writing 0x00000000 into address 0x16c80128
     
861. writing 0x00000003 into address 0x16c80194
     
862. ... check_ubi_partition() ...
     
863. ... start ubiattach ...
     
864. [    9.190000] UBI error: ubi_attach_mtd_dev: mtd8 is already attached to ubi0
     
865. ubiattach: error!: cannot attach mtd8
     
866.            error 17 (File exists)
     
867. ... ubiattach finished ...
     
868. ... detach mtd8 ...
     
869. ubidetach: error!: cannot detach "/dev/mtd8"
     
870.            error 16 (Device or resource busy)
     
871. ... start flash_erase ...
     
872. 
     
873. Erasing 128 Kibyte @ 0 --  0 % complete
     
874. Erasing 128 Kibyte @ 20000 --  0 % complete
     
875. Erasing 128 Kibyte @ 40000 --  0 % complete
     
876. Erasing 128 Kibyte @ 60000 --  0 % complete
     
877. Erasing 128 Kibyte @ 80000 --  0 % complete
     
878. Erasing 128 Kibyte @ a0000 --  0 % complete
     
879. Erasing 128 Kibyte @ c0000 --  0 % complete
     
880. Erasing 128 Kibyte @ e0000 --  0 % complete
     
881. Erasing 128 Kibyte @ 100000 --  0 % complete
     
882. Erasing 128 Kibyte @ 120000 --  1 % complete
     
883. Erasing 128 Kibyte @ 140000 --  1 % complete
     
884. Erasing 128 Kibyte @ 160000 --  1 % complete
     
885. Erasing 128 Kibyte @ 180000 --  1 % complete
     
886. Erasing 128 Kibyte @ 1a0000 --  1 % complete
     
887. Erasing 128 Kibyte @ 1c0000 --  1 % complete
     
888. Erasing 128 Kibyte @ 1e0000 --  1 % complete
     
889. Erasing 128 Kibyte @ 200000 --  1 % complete
     
890. Erasing 128 Kibyte @ 220000 --  1 % complete
     
891. Erasing 128 Kibyte @ 240000 --  2 % complete
     
892. Erasing 128 Kibyte @ 260000 --  2 % complete
     
893. Erasing 128 Kibyte @ 280000 --  2 % complete
     
894. Erasing 128 Kibyte @ 2a0000 --  2 % complete
     
895. Erasing 128 Kibyte @ 2c0000 --  2 % complete
     
896. Erasing 128 Kibyte @ 2e0000 --  2 % complete
     
897. Erasing 128 Kibyte @ 300000 --  2 % complete
     
898. Erasing 128 Kibyte @ 320000 --  2 % complete
     
899. Erasing 128 Kibyte @ 340000 --  3 % complete
     
900. Erasing 128 Kibyte @ 360000 --  3 % complete
     
901. Erasing 128 Kibyte @ 380000 --  3 % complete
     
902. Erasing 128 Kibyte @ 3a0000 --  3 % complete
     
903. Erasing 128 Kibyte @ 3c0000 --  3 % complete
     
904. Erasing 128 Kibyte @ 3e0000 --  3 % complete
     
905. Erasing 128 Kibyte @ 400000 --  3 % complete
     
906. Erasing 128 Kibyte @ 420000 --  3 % complete
     
907. Erasing 128 Kibyte @ 440000 --  3 % complete
     
908. Erasing 128 Kibyte @ 460000 --  4 % complete
     
909. Erasing 128 Kibyte @ 480000 --  4 % complete
     
910. Erasing 128 Kibyte @ 4a0000 --  4 % complete
     
911. Erasing 128 Kibyte @ 4c0000 --  4 % complete
     
912. Erasing 128 Kibyte @ 4e0000 --  4 % complete
     
913. Erasing 128 Kibyte @ 500000 --  4 % complete
     
914. Erasing 128 Kibyte @ 520000 --  4 % complete
     
915. Erasing 128 Kibyte @ 540000 --  4 % complete
     
916. Erasing 128 Kibyte @ 560000 --  4 % complete
     
917. Erasing 128 Kibyte @ 580000 --  5 % complete
     
918. Erasing 128 Kibyte @ 5a0000 --  5 % complete
     
919. Erasing 128 Kibyte @ 5c0000 --  5 % complete
     
920. Erasing 128 Kibyte @ 5e0000 --  5 % complete
     
921. Erasing 128 Kibyte @ 600000 --  5 % complete
     
922. Erasing 128 Kibyte @ 620000 --  5 % complete
     
923. Erasing 128 Kibyte @ 640000 --  5 % complete
     
924. Erasing 128 Kibyte @ 660000 --  5 % complete
     
925. Erasing 128 Kibyte @ 680000 --  6 % complete
     
926. Erasing 128 Kibyte @ 6a0000 --  6 % complete
     
927. Erasing 128 Kibyte @ 6c0000 --  6 % complete
     
928. Erasing 128 Kibyte @ 6e0000 --  6 % complete
     
929. Erasing 128 Kibyte @ 700000 --  6 % complete
     
930. Erasing 128 Kibyte @ 720000 --  6 % complete
     
931. Erasing 128 Kibyte @ 740000 --  6 % complete
     
932. Erasing 128 Kibyte @ 760000 --  6 % complete
     
933. Erasing 128 Kibyte @ 780000 --  6 % complete
     
934. Erasing 128 Kibyte @ 7a0000 --  7 % complete
     
935. Erasing 128 Kibyte @ 7c0000 --  7 % complete
     
936. Erasing 128 Kibyte @ 7e0000 --  7 % complete
     
937. Erasing 128 Kibyte @ 800000 --  7 % complete
     
938. Erasing 128 Kibyte @ 820000 --  7 % complete
     
939. Erasing 128 Kibyte @ 840000 --  7 % complete
     
940. Erasing 128 Kibyte @ 860000 --  7 % complete
     
941. Erasing 128 Kibyte @ 880000 --  7 % complete
     
942. Erasing 128 Kibyte @ 8a0000 --  7 % complete
     
943. Erasing 128 Kibyte @ 8c0000 --  8 % complete
     
944. Erasing 128 Kibyte @ 8e0000 --  8 % complete
     
945. Erasing 128 Kibyte @ 900000 --  8 % complete
     
946. Erasing 128 Kibyte @ 920000 --  8 % complete
     
947. Erasing 128 Kibyte @ 940000 --  8 % complete
     
948. Erasing 128 Kibyte @ 960000 --  8 % complete
     
949. Erasing 128 Kibyte @ 980000 --  8 % complete
     
950. Erasing 128 Kibyte @ 9a0000 --  8 % complete
     
951. Erasing 128 Kibyte @ 9c0000 --  9 % complete
     
952. Erasing 128 Kibyte @ 9e0000 --  9 % complete
     
953. Erasing 128 Kibyte @ a00000 --  9 % complete
     
954. Erasing 128 Kibyte @ a20000 --  9 % complete
     
955. Erasing 128 Kibyte @ a40000 --  9 % complete
     
956. Erasing 128 Kibyte @ a60000 --  9 % complete
     
957. Erasing 128 Kibyte @ a80000 --  9 % complete
     
958. Erasing 128 Kibyte @ aa0000 --  9 % complete
     
959. Erasing 128 Kibyte @ ac0000 --  9 % complete
     
960. Erasing 128 Kibyte @ ae0000 -- 10 % complete
     
961. Erasing 128 Kibyte @ b00000 -- 10 % complete
     
962. Erasing 128 Kibyte @ b20000 -- 10 % complete
     
963. Erasing 128 Kibyte @ b40000 -- 10 % complete
     
964. Erasing 128 Kibyte @ b60000 -- 10 % complete
     
965. Erasing 128 Kibyte @ b80000 -- 10 % complete
     
966. Erasing 128 Kibyte @ ba0000 -- 10 % complete
     
967. Erasing 128 Kibyte @ bc0000 -- 10 % complete
     
968. Erasing 128 Kibyte @ be0000 -- 10 % complete
     
969. Erasing 128 Kibyte @ c00000 -- 11 % complete
     
970. Erasing 128 Kibyte @ c20000 -- 11 % complete
     
971. Erasing 128 Kibyte @ c40000 -- 11 % complete
     
972. Erasing 128 Kibyte @ c60000 -- 11 % complete
     
973. Erasing 128 Kibyte @ c80000 -- 11 % complete
     
974. Erasing 128 Kibyte @ ca0000 -- 11 % complete
     
975. Erasing 128 Kibyte @ cc0000 -- 11 % complete
     
976. Erasing 128 Kibyte @ ce0000 -- 11 % complete
     
977. Erasing 128 Kibyte @ d00000 -- 12 % complete
     
978. Erasing 128 Kibyte @ d20000 -- 12 % complete
     
979. Erasing 128 Kibyte @ d40000 -- 12 % complete
     
980. Erasing 128 Kibyte @ d60000 -- 12 % complete
     
981. Erasing 128 Kibyte @ d80000 -- 12 % complete
     
982. Erasing 128 Kibyte @ da0000 -- 12 % complete
     
983. Erasing 128 Kibyte @ dc0000 -- 12 % complete
     
984. Erasing 128 Kibyte @ de0000 -- 12 % complete
     
985. Erasing 128 Kibyte @ e00000 -- 12 % complete
     
986. Erasing 128 Kibyte @ e20000 -- 13 % complete
     
987. Erasing 128 Kibyte @ e40000 -- 13 % complete
     
988. Erasing 128 Kibyte @ e60000 -- 13 % complete
     
989. Erasing 128 Kibyte @ e80000 -- 13 % complete
     
990. Erasing 128 Kibyte @ ea0000 -- 13 % complete
     
991. Erasing 128 Kibyte @ ec0000 -- 13 % complete
     
992. Erasing 128 Kibyte @ ee0000 -- 13 % complete
     
993. Erasing 128 Kibyte @ f00000 -- 13 % complete
     
994. Erasing 128 Kibyte @ f20000 -- 14 % complete
     
995. Erasing 128 Kibyte @ f40000 -- 14 % complete
     
996. Erasing 128 Kibyte @ f60000 -- 14 % complete
     
997. Erasing 128 Kibyte @ f80000 -- 14 % complete
     
998. Erasing 128 Kibyte @ fa0000 -- 14 % complete
     
999. Erasing 128 Kibyte @ fc0000 -- 14 % complete
     
1000. Erasing 128 Kibyte @ fe0000 -- 14 % complete
      
1001. Erasing 128 Kibyte @ 1000000 -- 14 % complete
      
1002. Erasing 128 Kibyte @ 1020000 -- 14 % complete
      
1003. Erasing 128 Kibyte @ 1040000 -- 15 % complete
      
1004. Erasing 128 Kibyte @ 1060000 -- 15 % complete
      
1005. Erasing 128 Kibyte @ 1080000 -- 15 % complete
      
1006. Erasing 128 Kibyte @ 10a0000 -- 15 % complete
      
1007. Erasing 128 Kibyte @ 10c0000 -- 15 % complete
      
1008. Erasing 128 Kibyte @ 10e0000 -- 15 % complete
      
1009. Erasing 128 Kibyte @ 1100000 -- 15 % complete
      
1010. Erasing 128 Kibyte @ 1120000 -- 15 % complete
      
1011. Erasing 128 Kibyte @ 1140000 -- 15 % complete
      
1012. Erasing 128 Kibyte @ 1160000 -- 16 % complete
      
1013. Erasing 128 Kibyte @ 1180000 -- 16 % complete
      
1014. Erasing 128 Kibyte @ 11a0000 -- 16 % complete
      
1015. Erasing 128 Kibyte @ 11c0000 -- 16 % complete
      
1016. Erasing 128 Kibyte @ 11e0000 -- 16 % complete
      
1017. Erasing 128 Kibyte @ 1200000 -- 16 % complete
      
1018. Erasing 128 Kibyte @ 1220000 -- 16 % complete
      
1019. Erasing 128 Kibyte @ 1240000 -- 16 % complete
      
1020. Erasing 128 Kibyte @ 1260000 -- 17 % complete
      
1021. Erasing 128 Kibyte @ 1280000 -- 17 % complete
      
1022. Erasing 128 Kibyte @ 12a0000 -- 17 % complete
      
1023. Erasing 128 Kibyte @ 12c0000 -- 17 % complete
      
1024. Erasing 128 Kibyte @ 12e0000 -- 17 % complete
      
1025. Erasing 128 Kibyte @ 1300000 -- 17 % complete
      
1026. Erasing 128 Kibyte @ 1320000 -- 17 % complete
      
1027. Erasing 128 Kibyte @ 1340000 -- 17 % complete
      
1028. Erasing 128 Kibyte @ 1360000 -- 17 % complete
      
1029. Erasing 128 Kibyte @ 1380000 -- 18 % complete
      
1030. Erasing 128 Kibyte @ 13a0000 -- 18 % complete
      
1031. Erasing 128 Kibyte @ 13c0000 -- 18 % complete
      
1032. Erasing 128 Kibyte @ 13e0000 -- 18 % complete
      
1033. Erasing 128 Kibyte @ 1400000 -- 18 % complete
      
1034. Erasing 128 Kibyte @ 1420000 -- 18 % complete
      
1035. Erasing 128 Kibyte @ 1440000 -- 18 % complete
      
1036. Erasing 128 Kibyte @ 1460000 -- 18 % complete
      
1037. Erasing 128 Kibyte @ 1480000 -- 18 % complete
      
1038. Erasing 128 Kibyte @ 14a0000 -- 19 % complete
      
1039. Erasing 128 Kibyte @ 14c0000 -- 19 % complete
      
1040. Erasing 128 Kibyte @ 14e0000 -- 19 % complete
      
1041. Erasing 128 Kibyte @ 1500000 -- 19 % complete
      
1042. Erasing 128 Kibyte @ 1520000 -- 19 % complete
      
1043. Erasing 128 Kibyte @ 1540000 -- 19 % complete
      
1044. Erasing 128 Kibyte @ 1560000 -- 19 % complete
      
1045. Erasing 128 Kibyte @ 1580000 -- 19 % complete
      
1046. Erasing 128 Kibyte @ 15a0000 -- 20 % complete
      
1047. Erasing 128 Kibyte @ 15c0000 -- 20 % complete
      
1048. Erasing 128 Kibyte @ 15e0000 -- 20 % complete
      
1049. Erasing 128 Kibyte @ 1600000 -- 20 % complete
      
1050. Erasing 128 Kibyte @ 1620000 -- 20 % complete
      
1051. Erasing 128 Kibyte @ 1640000 -- 20 % complete
      
1052. Erasing 128 Kibyte @ 1660000 -- 20 % complete
      
1053. Erasing 128 Kibyte @ 1680000 -- 20 % complete
      
1054. Erasing 128 Kibyte @ 16a0000 -- 20 % complete
      
1055. Erasing 128 Kibyte @ 16c0000 -- 21 % complete
      
1056. Erasing 128 Kibyte @ 16e0000 -- 21 % complete
      
1057. Erasing 128 Kibyte @ 1700000 -- 21 % complete
      
1058. Erasing 128 Kibyte @ 1720000 -- 21 % complete
      
1059. Erasing 128 Kibyte @ 1740000 -- 21 % complete
      
1060. Erasing 128 Kibyte @ 1760000 -- 21 % complete
      
1061. Erasing 128 Kibyte @ 1780000 -- 21 % complete
      
1062. Erasing 128 Kibyte @ 17a0000 -- 21 % complete
      
1063. Erasing 128 Kibyte @ 17c0000 -- 21 % complete
      
1064. Erasing 128 Kibyte @ 17e0000 -- 22 % complete
      
1065. Erasing 128 Kibyte @ 1800000 -- 22 % complete
      
1066. Erasing 128 Kibyte @ 1820000 -- 22 % complete
      
1067. Erasing 128 Kibyte @ 1840000 -- 22 % complete
      
1068. Erasing 128 Kibyte @ 1860000 -- 22 % complete
      
1069. Erasing 128 Kibyte @ 1880000 -- 22 % complete
      
1070. Erasing 128 Kibyte @ 18a0000 -- 22 % complete
      
1071. Erasing 128 Kibyte @ 18c0000 -- 22 % complete
      
1072. Erasing 128 Kibyte @ 18e0000 -- 23 % complete
      
1073. Erasing 128 Kibyte @ 1900000 -- 23 % complete
      
1074. Erasing 128 Kibyte @ 1920000 -- 23 % complete
      
1075. Erasing 128 Kibyte @ 1940000 -- 23 % complete
      
1076. Erasing 128 Kibyte @ 1960000 -- 23 % complete
      
1077. Erasing 128 Kibyte @ 1980000 -- 23 % complete
      
1078. Erasing 128 Kibyte @ 19a0000 -- 23 % complete
      
1079. Erasing 128 Kibyte @ 19c0000 -- 23 % complete
      
1080. Erasing 128 Kibyte @ 19e0000 -- 23 % complete
      
1081. Erasing 128 Kibyte @ 1a00000 -- 24 % complete
      
1082. Erasing 128 Kibyte @ 1a20000 -- 24 % complete
      
1083. Erasing 128 Kibyte @ 1a40000 -- 24 % complete
      
1084. Erasing 128 Kibyte @ 1a60000 -- 24 % complete
      
1085. Erasing 128 Kibyte @ 1a80000 -- 24 % complete
      
1086. Erasing 128 Kibyte @ 1aa0000 -- 24 % complete
      
1087. Erasing 128 Kibyte @ 1ac0000 -- 24 % complete
      
1088. Erasing 128 Kibyte @ 1ae0000 -- 24 % complete
      
1089. Erasing 128 Kibyte @ 1b00000 -- 25 % complete
      
1090. Erasing 128 Kibyte @ 1b20000 -- 25 % complete
      
1091. Erasing 128 Kibyte @ 1b40000 -- 25 % complete
      
1092. Erasing 128 Kibyte @ 1b60000 -- 25 % complete
      
1093. Erasing 128 Kibyte @ 1b80000 -- 25 % complete
      
1094. Erasing 128 Kibyte @ 1ba0000 -- 25 % complete
      
1095. Erasing 128 Kibyte @ 1bc0000 -- 25 % complete
      
1096. Erasing 128 Kibyte @ 1be0000 -- 25 % complete
      
1097. Erasing 128 Kibyte @ 1c00000 -- 25 % complete
      
1098. Erasing 128 Kibyte @ 1c20000 -- 26 % complete
      
1099. Erasing 128 Kibyte @ 1c40000 -- 26 % complete
      
1100. Erasing 128 Kibyte @ 1c60000 -- 26 % complete
      
1101. Erasing 128 Kibyte @ 1c80000 -- 26 % complete
      
1102. Erasing 128 Kibyte @ 1ca0000 -- 26 % complete
      
1103. Erasing 128 Kibyte @ 1cc0000 -- 26 % complete
      
1104. Erasing 128 Kibyte @ 1ce0000 -- 26 % complete
      
1105. Erasing 128 Kibyte @ 1d00000 -- 26 % complete
      
1106. Erasing 128 Kibyte @ 1d20000 -- 26 % complete
      
1107. Erasing 128 Kibyte @ 1d40000 -- 27 % complete
      
1108. Erasing 128 Kibyte @ 1d60000 -- 27 % complete
      
1109. Erasing 128 Kibyte @ 1d80000 -- 27 % complete
      
1110. Erasing 128 Kibyte @ 1da0000 -- 27 % complete
      
1111. Erasing 128 Kibyte @ 1dc0000 -- 27 % complete
      
1112. Erasing 128 Kibyte @ 1de0000 -- 27 % complete
      
1113. Erasing 128 Kibyte @ 1e00000 -- 27 % complete
      
1114. Erasing 128 Kibyte @ 1e20000 -- 27 % complete
      
1115. Erasing 128 Kibyte @ 1e40000 -- 28 % complete
      
1116. Erasing 128 Kibyte @ 1e60000 -- 28 % complete
      
1117. Erasing 128 Kibyte @ 1e80000 -- 28 % complete
      
1118. Erasing 128 Kibyte @ 1ea0000 -- 28 % complete
      
1119. Erasing 128 Kibyte @ 1ec0000 -- 28 % complete
      
1120. Erasing 128 Kibyte @ 1ee0000 -- 28 % complete
      
1121. Erasing 128 Kibyte @ 1f00000 -- 28 % complete
      
1122. Erasing 128 Kibyte @ 1f20000 -- 28 % complete
      
1123. Erasing 128 Kibyte @ 1f40000 -- 28 % complete
      
1124. Erasing 128 Kibyte @ 1f60000 -- 29 % complete
      
1125. Erasing 128 Kibyte @ 1f80000 -- 29 % complete
      
1126. Erasing 128 Kibyte @ 1fa0000 -- 29 % complete
      
1127. Erasing 128 Kibyte @ 1fc0000 -- 29 % complete
      
1128. Erasing 128 Kibyte @ 1fe0000 -- 29 % complete
      
1129. Erasing 128 Kibyte @ 2000000 -- 29 % complete
      
1130. Erasing 128 Kibyte @ 2020000 -- 29 % complete
      
1131. Erasing 128 Kibyte @ 2040000 -- 29 % complete
      
1132. Erasing 128 Kibyte @ 2060000 -- 29 % complete
      
1133. Erasing 128 Kibyte @ 2080000 -- 30 % complete
      
1134. Erasing 128 Kibyte @ 20a0000 -- 30 % complete
      
1135. Erasing 128 Kibyte @ 20c0000 -- 30 % complete
      
1136. Erasing 128 Kibyte @ 20e0000 -- 30 % complete
      
1137. Erasing 128 Kibyte @ 2100000 -- 30 % complete
      
1138. Erasing 128 Kibyte @ 2120000 -- 30 % complete
      
1139. Erasing 128 Kibyte @ 2140000 -- 30 % complete
      
1140. Erasing 128 Kibyte @ 2160000 -- 30 % complete
      
1141. Erasing 128 Kibyte @ 2180000 -- 31 % complete
      
1142. Erasing 128 Kibyte @ 21a0000 -- 31 % complete
      
1143. Erasing 128 Kibyte @ 21c0000 -- 31 % complete
      
1144. Erasing 128 Kibyte @ 21e0000 -- 31 % complete
      
1145. Erasing 128 Kibyte @ 2200000 -- 31 % complete
      
1146. Erasing 128 Kibyte @ 2220000 -- 31 % complete
      
1147. Erasing 128 Kibyte @ 2240000 -- 31 % complete
      
1148. Erasing 128 Kibyte @ 2260000 -- 31 % complete
      
1149. Erasing 128 Kibyte @ 2280000 -- 31 % complete
      
1150. Erasing 128 Kibyte @ 22a0000 -- 32 % complete
      
1151. Erasing 128 Kibyte @ 22c0000 -- 32 % complete
      
1152. Erasing 128 Kibyte @ 22e0000 -- 32 % complete
      
1153. Erasing 128 Kibyte @ 2300000 -- 32 % complete
      
1154. Erasing 128 Kibyte @ 2320000 -- 32 % complete
      
1155. Erasing 128 Kibyte @ 2340000 -- 32 % complete
      
1156. Erasing 128 Kibyte @ 2360000 -- 32 % complete
      
1157. Erasing 128 Kibyte @ 2380000 -- 32 % complete
      
1158. Erasing 128 Kibyte @ 23a0000 -- 32 % complete
      
1159. Erasing 128 Kibyte @ 23c0000 -- 33 % complete
      
1160. Erasing 128 Kibyte @ 23e0000 -- 33 % complete
      
1161. Erasing 128 Kibyte @ 2400000 -- 33 % complete
      
1162. Erasing 128 Kibyte @ 2420000 -- 33 % complete
      
1163. Erasing 128 Kibyte @ 2440000 -- 33 % complete
      
1164. Erasing 128 Kibyte @ 2460000 -- 33 % complete
      
1165. Erasing 128 Kibyte @ 2480000 -- 33 % complete
      
1166. Erasing 128 Kibyte @ 24a0000 -- 33 % complete
      
1167. Erasing 128 Kibyte @ 24c0000 -- 34 % complete
      
1168. Erasing 128 Kibyte @ 24e0000 -- 34 % complete
      
1169. Erasing 128 Kibyte @ 2500000 -- 34 % complete
      
1170. Erasing 128 Kibyte @ 2520000 -- 34 % complete
      
1171. Erasing 128 Kibyte @ 2540000 -- 34 % complete
      
1172. Erasing 128 Kibyte @ 2560000 -- 34 % complete
      
1173. Erasing 128 Kibyte @ 2580000 -- 34 % complete
      
1174. Erasing 128 Kibyte @ 25a0000 -- 34 % complete
      
1175. Erasing 128 Kibyte @ 25c0000 -- 34 % complete
      
1176. Erasing 128 Kibyte @ 25e0000 -- 35 % complete
      
1177. Erasing 128 Kibyte @ 2600000 -- 35 % complete
      
1178. Erasing 128 Kibyte @ 2620000 -- 35 % complete
      
1179. Erasing 128 Kibyte @ 2640000 -- 35 % complete
      
1180. Erasing 128 Kibyte @ 2660000 -- 35 % complete
      
1181. Erasing 128 Kibyte @ 2680000 -- 35 % complete
      
1182. Erasing 128 Kibyte @ 26a0000 -- 35 % complete
      
1183. Erasing 128 Kibyte @ 26c0000 -- 35 % complete
      
1184. Erasing 128 Kibyte @ 26e0000 -- 35 % complete
      
1185. Erasing 128 Kibyte @ 2700000 -- 36 % complete
      
1186. Erasing 128 Kibyte @ 2720000 -- 36 % complete
      
1187. Erasing 128 Kibyte @ 2740000 -- 36 % complete
      
1188. Erasing 128 Kibyte @ 2760000 -- 36 % complete
      
1189. Erasing 128 Kibyte @ 2780000 -- 36 % complete
      
1190. Erasing 128 Kibyte @ 27a0000 -- 36 % complete
      
1191. Erasing 128 Kibyte @ 27c0000 -- 36 % complete
      
1192. Erasing 128 Kibyte @ 27e0000 -- 36 % complete
      
1193. Erasing 128 Kibyte @ 2800000 -- 37 % complete
      
1194. Erasing 128 Kibyte @ 2820000 -- 37 % complete
      
1195. Erasing 128 Kibyte @ 2840000 -- 37 % complete
      
1196. Erasing 128 Kibyte @ 2860000 -- 37 % complete
      
1197. Erasing 128 Kibyte @ 2880000 -- 37 % complete
      
1198. Erasing 128 Kibyte @ 28a0000 -- 37 % complete
      
1199. Erasing 128 Kibyte @ 28c0000 -- 37 % complete
      
1200. Erasing 128 Kibyte @ 28e0000 -- 37 % complete
      
1201. Erasing 128 Kibyte @ 2900000 -- 37 % complete
      
1202. Erasing 128 Kibyte @ 2920000 -- 38 % complete
      
1203. Erasing 128 Kibyte @ 2940000 -- 38 % complete
      
1204. Erasing 128 Kibyte @ 2960000 -- 38 % complete
      
1205. Erasing 128 Kibyte @ 2980000 -- 38 % complete
      
1206. Erasing 128 Kibyte @ 29a0000 -- 38 % complete
      
1207. Erasing 128 Kibyte @ 29c0000 -- 38 % complete
      
1208. Erasing 128 Kibyte @ 29e0000 -- 38 % complete
      
1209. Erasing 128 Kibyte @ 2a00000 -- 38 % complete
      
1210. Erasing 128 Kibyte @ 2a20000 -- 39 % complete
      
1211. Erasing 128 Kibyte @ 2a40000 -- 39 % complete
      
1212. Erasing 128 Kibyte @ 2a60000 -- 39 % complete
      
1213. Erasing 128 Kibyte @ 2a80000 -- 39 % complete
      
1214. Erasing 128 Kibyte @ 2aa0000 -- 39 % complete
      
1215. Erasing 128 Kibyte @ 2ac0000 -- 39 % complete
      
1216. Erasing 128 Kibyte @ 2ae0000 -- 39 % complete
      
1217. Erasing 128 Kibyte @ 2b00000 -- 39 % complete
      
1218. Erasing 128 Kibyte @ 2b20000 -- 39 % complete
      
1219. Erasing 128 Kibyte @ 2b40000 -- 40 % complete
      
1220. Erasing 128 Kibyte @ 2b60000 -- 40 % complete
      
1221. Erasing 128 Kibyte @ 2b80000 -- 40 % complete
      
1222. Erasing 128 Kibyte @ 2ba0000 -- 40 % complete
      
1223. Erasing 128 Kibyte @ 2bc0000 -- 40 % complete
      
1224. Erasing 128 Kibyte @ 2be0000 -- 40 % complete
      
1225. Erasing 128 Kibyte @ 2c00000 -- 40 % complete
      
1226. Erasing 128 Kibyte @ 2c20000 -- 40 % complete
      
1227. Erasing 128 Kibyte @ 2c40000 -- 40 % complete
      
1228. Erasing 128 Kibyte @ 2c60000 -- 41 % complete
      
1229. Erasing 128 Kibyte @ 2c80000 -- 41 % complete
      
1230. Erasing 128 Kibyte @ 2ca0000 -- 41 % complete
      
1231. Erasing 128 Kibyte @ 2cc0000 -- 41 % complete
      
1232. Erasing 128 Kibyte @ 2ce0000 -- 41 % complete
      
1233. Erasing 128 Kibyte @ 2d00000 -- 41 % complete
      
1234. Erasing 128 Kibyte @ 2d20000 -- 41 % complete
      
1235. Erasing 128 Kibyte @ 2d40000 -- 41 % complete
      
1236. Erasing 128 Kibyte @ 2d60000 -- 42 % complete
      
1237. Erasing 128 Kibyte @ 2d80000 -- 42 % complete
      
1238. Erasing 128 Kibyte @ 2da0000 -- 42 % complete
      
1239. Erasing 128 Kibyte @ 2dc0000 -- 42 % complete
      
1240. Erasing 128 Kibyte @ 2de0000 -- 42 % complete
      
1241. Erasing 128 Kibyte @ 2e00000 -- 42 % complete
      
1242. Erasing 128 Kibyte @ 2e20000 -- 42 % complete
      
1243. Erasing 128 Kibyte @ 2e40000 -- 42 % complete
      
1244. Erasing 128 Kibyte @ 2e60000 -- 42 % complete
      
1245. Erasing 128 Kibyte @ 2e80000 -- 43 % complete
      
1246. Erasing 128 Kibyte @ 2ea0000 -- 43 % complete
      
1247. Erasing 128 Kibyte @ 2ec0000 -- 43 % complete
      
1248. Erasing 128 Kibyte @ 2ee0000 -- 43 % complete
      
1249. Erasing 128 Kibyte @ 2f00000 -- 43 % complete
      
1250. Erasing 128 Kibyte @ 2f20000 -- 43 % complete
      
1251. Erasing 128 Kibyte @ 2f40000 -- 43 % complete
      
1252. Erasing 128 Kibyte @ 2f60000 -- 43 % complete
      
1253. Erasing 128 Kibyte @ 2f80000 -- 43 % complete
      
1254. Erasing 128 Kibyte @ 2fa0000 -- 44 % complete
      
1255. Erasing 128 Kibyte @ 2fc0000 -- 44 % complete
      
1256. Erasing 128 Kibyte @ 2fe0000 -- 44 % complete
      
1257. Erasing 128 Kibyte @ 3000000 -- 44 % complete
      
1258. Erasing 128 Kibyte @ 3020000 -- 44 % complete
      
1259. Erasing 128 Kibyte @ 3040000 -- 44 % complete
      
1260. Erasing 128 Kibyte @ 3060000 -- 44 % complete
      
1261. Erasing 128 Kibyte @ 3080000 -- 44 % complete
      
1262. Erasing 128 Kibyte @ 30a0000 -- 45 % complete
      
1263. Erasing 128 Kibyte @ 30c0000 -- 45 % complete
      
1264. Erasing 128 Kibyte @ 30e0000 -- 45 % complete
      
1265. Erasing 128 Kibyte @ 3100000 -- 45 % complete
      
1266. Erasing 128 Kibyte @ 3120000 -- 45 % complete
      
1267. Erasing 128 Kibyte @ 3140000 -- 45 % complete
      
1268. Erasing 128 Kibyte @ 3160000 -- 45 % complete
      
1269. Erasing 128 Kibyte @ 3180000 -- 45 % complete
      
1270. Erasing 128 Kibyte @ 31a0000 -- 45 % complete
      
1271. Erasing 128 Kibyte @ 31c0000 -- 46 % complete
      
1272. Erasing 128 Kibyte @ 31e0000 -- 46 % complete
      
1273. Erasing 128 Kibyte @ 3200000 -- 46 % complete
      
1274. Erasing 128 Kibyte @ 3220000 -- 46 % complete
      
1275. Erasing 128 Kibyte @ 3240000 -- 46 % complete
      
1276. Erasing 128 Kibyte @ 3260000 -- 46 % complete
      
1277. Erasing 128 Kibyte @ 3280000 -- 46 % complete
      
1278. Erasing 128 Kibyte @ 32a0000 -- 46 % complete
      
1279. Erasing 128 Kibyte @ 32c0000 -- 46 % complete
      
1280. Erasing 128 Kibyte @ 32e0000 -- 47 % complete
      
1281. Erasing 128 Kibyte @ 3300000 -- 47 % complete
      
1282. Erasing 128 Kibyte @ 3320000 -- 47 % complete
      
1283. Erasing 128 Kibyte @ 3340000 -- 47 % complete
      
1284. Erasing 128 Kibyte @ 3360000 -- 47 % complete
      
1285. Erasing 128 Kibyte @ 3380000 -- 47 % complete
      
1286. Erasing 128 Kibyte @ 33a0000 -- 47 % complete
      
1287. Erasing 128 Kibyte @ 33c0000 -- 47 % complete
      
1288. Erasing 128 Kibyte @ 33e0000 -- 48 % complete
      
1289. Erasing 128 Kibyte @ 3400000 -- 48 % complete
      
1290. Erasing 128 Kibyte @ 3420000 -- 48 % complete
      
1291. Erasing 128 Kibyte @ 3440000 -- 48 % complete
      
1292. Erasing 128 Kibyte @ 3460000 -- 48 % complete
      
1293. Erasing 128 Kibyte @ 3480000 -- 48 % complete
      
1294. Erasing 128 Kibyte @ 34a0000 -- 48 % complete
      
1295. Erasing 128 Kibyte @ 34c0000 -- 48 % complete
      
1296. Erasing 128 Kibyte @ 34e0000 -- 48 % complete
      
1297. Erasing 128 Kibyte @ 3500000 -- 49 % complete
      
1298. Erasing 128 Kibyte @ 3520000 -- 49 % complete
      
1299. Erasing 128 Kibyte @ 3540000 -- 49 % complete
      
1300. Erasing 128 Kibyte @ 3560000 -- 49 % complete
      
1301. Erasing 128 Kibyte @ 3580000 -- 49 % complete
      
1302. Erasing 128 Kibyte @ 35a0000 -- 49 % complete
      
1303. Erasing 128 Kibyte @ 35c0000 -- 49 % complete
      
1304. Erasing 128 Kibyte @ 35e0000 -- 49 % complete
      
1305. Erasing 128 Kibyte @ 3600000 -- 50 % complete
      
1306. Erasing 128 Kibyte @ 3620000 -- 50 % complete
      
1307. Erasing 128 Kibyte @ 3640000 -- 50 % complete
      
1308. Erasing 128 Kibyte @ 3660000 -- 50 % complete
      
1309. Erasing 128 Kibyte @ 3680000 -- 50 % complete
      
1310. Erasing 128 Kibyte @ 36a0000 -- 50 % complete
      
1311. Erasing 128 Kibyte @ 36c0000 -- 50 % complete
      
1312. Erasing 128 Kibyte @ 36e0000 -- 50 % complete
      
1313. Erasing 128 Kibyte @ 3700000 -- 50 % complete
      
1314. Erasing 128 Kibyte @ 3720000 -- 51 % complete
      
1315. Erasing 128 Kibyte @ 3740000 -- 51 % complete
      
1316. Erasing 128 Kibyte @ 3760000 -- 51 % complete
      
1317. Erasing 128 Kibyte @ 3780000 -- 51 % complete
      
1318. Erasing 128 Kibyte @ 37a0000 -- 51 % complete
      
1319. Erasing 128 Kibyte @ 37c0000 -- 51 % complete
      
1320. Erasing 128 Kibyte @ 37e0000 -- 51 % complete
      
1321. Erasing 128 Kibyte @ 3800000 -- 51 % complete
      
1322. Erasing 128 Kibyte @ 3820000 -- 51 % complete
      
1323. Erasing 128 Kibyte @ 3840000 -- 52 % complete
      
1324. Erasing 128 Kibyte @ 3860000 -- 52 % complete
      
1325. Erasing 128 Kibyte @ 3880000 -- 52 % complete
      
1326. Erasing 128 Kibyte @ 38a0000 -- 52 % complete
      
1327. Erasing 128 Kibyte @ 38c0000 -- 52 % complete
      
1328. Erasing 128 Kibyte @ 38e0000 -- 52 % complete
      
1329. Erasing 128 Kibyte @ 3900000 -- 52 % complete
      
1330. Erasing 128 Kibyte @ 3920000 -- 52 % complete
      
1331. Erasing 128 Kibyte @ 3940000 -- 53 % complete
      
1332. Erasing 128 Kibyte @ 3960000 -- 53 % complete
      
1333. Erasing 128 Kibyte @ 3980000 -- 53 % complete
      
1334. Erasing 128 Kibyte @ 39a0000 -- 53 % complete
      
1335. Erasing 128 Kibyte @ 39c0000 -- 53 % complete
      
1336. Erasing 128 Kibyte @ 39e0000 -- 53 % complete
      
1337. Erasing 128 Kibyte @ 3a00000 -- 53 % complete
      
1338. Erasing 128 Kibyte @ 3a20000 -- 53 % complete
      
1339. Erasing 128 Kibyte @ 3a40000 -- 53 % complete
      
1340. Erasing 128 Kibyte @ 3a60000 -- 54 % complete
      
1341. Erasing 128 Kibyte @ 3a80000 -- 54 % complete
      
1342. Erasing 128 Kibyte @ 3aa0000 -- 54 % complete
      
1343. Erasing 128 Kibyte @ 3ac0000 -- 54 % complete
      
1344. Erasing 128 Kibyte @ 3ae0000 -- 54 % complete
      
1345. Erasing 128 Kibyte @ 3b00000 -- 54 % complete
      
1346. Erasing 128 Kibyte @ 3b20000 -- 54 % complete
      
1347. Erasing 128 Kibyte @ 3b40000 -- 54 % complete
      
1348. Erasing 128 Kibyte @ 3b60000 -- 54 % complete
      
1349. Erasing 128 Kibyte @ 3b80000 -- 55 % complete
      
1350. Erasing 128 Kibyte @ 3ba0000 -- 55 % complete
      
1351. Erasing 128 Kibyte @ 3bc0000 -- 55 % complete
      
1352. Erasing 128 Kibyte @ 3be0000 -- 55 % complete
      
1353. Erasing 128 Kibyte @ 3c00000 -- 55 % complete
      
1354. Erasing 128 Kibyte @ 3c20000 -- 55 % complete
      
1355. Erasing 128 Kibyte @ 3c40000 -- 55 % complete
      
1356. Erasing 128 Kibyte @ 3c60000 -- 55 % complete
      
1357. Erasing 128 Kibyte @ 3c80000 -- 56 % complete
      
1358. Erasing 128 Kibyte @ 3ca0000 -- 56 % complete
      
1359. Erasing 128 Kibyte @ 3cc0000 -- 56 % complete
      
1360. Erasing 128 Kibyte @ 3ce0000 -- 56 % complete
      
1361. Erasing 128 Kibyte @ 3d00000 -- 56 % complete
      
1362. Erasing 128 Kibyte @ 3d20000 -- 56 % complete
      
1363. Erasing 128 Kibyte @ 3d40000 -- 56 % complete
      
1364. Erasing 128 Kibyte @ 3d60000 -- 56 % complete
      
1365. Erasing 128 Kibyte @ 3d80000 -- 56 % complete
      
1366. Erasing 128 Kibyte @ 3da0000 -- 57 % complete
      
1367. Erasing 128 Kibyte @ 3dc0000 -- 57 % complete
      
1368. Erasing 128 Kibyte @ 3de0000 -- 57 % complete
      
1369. Erasing 128 Kibyte @ 3e00000 -- 57 % complete
      
1370. Erasing 128 Kibyte @ 3e20000 -- 57 % complete
      
1371. Erasing 128 Kibyte @ 3e40000 -- 57 % complete
      
1372. Erasing 128 Kibyte @ 3e60000 -- 57 % complete
      
1373. Erasing 128 Kibyte @ 3e80000 -- 57 % complete
      
1374. Erasing 128 Kibyte @ 3ea0000 -- 57 % complete
      
1375. Erasing 128 Kibyte @ 3ec0000 -- 58 % complete
      
1376. Erasing 128 Kibyte @ 3ee0000 -- 58 % complete
      
1377. Erasing 128 Kibyte @ 3f00000 -- 58 % complete
      
1378. Erasing 128 Kibyte @ 3f20000 -- 58 % complete
      
1379. Erasing 128 Kibyte @ 3f40000 -- 58 % complete
      
1380. Erasing 128 Kibyte @ 3f60000 -- 58 % complete
      
1381. Erasing 128 Kibyte @ 3f80000 -- 58 % complete
      
1382. Erasing 128 Kibyte @ 3fa0000 -- 58 % complete
      
1383. Erasing 128 Kibyte @ 3fc0000 -- 59 % complete
      
1384. Erasing 128 Kibyte @ 3fe0000 -- 59 % complete
      
1385. Erasing 128 Kibyte @ 4000000 -- 59 % complete
      
1386. Erasing 128 Kibyte @ 4020000 -- 59 % complete
      
1387. Erasing 128 Kibyte @ 4040000 -- 59 % complete
      
1388. Erasing 128 Kibyte @ 4060000 -- 59 % complete
      
1389. Erasing 128 Kibyte @ 4080000 -- 59 % complete
      
1390. Erasing 128 Kibyte @ 40a0000 -- 59 % complete
      
1391. Erasing 128 Kibyte @ 40c0000 -- 59 % complete
      
1392. Erasing 128 Kibyte @ 40e0000 -- 60 % complete
      
1393. Erasing 128 Kibyte @ 4100000 -- 60 % complete
      
1394. Erasing 128 Kibyte @ 4120000 -- 60 % complete
      
1395. Erasing 128 Kibyte @ 4140000 -- 60 % complete
      
1396. Erasing 128 Kibyte @ 4160000 -- 60 % complete
      
1397. Erasing 128 Kibyte @ 4180000 -- 60 % complete
      
1398. Erasing 128 Kibyte @ 41a0000 -- 60 % complete
      
1399. Erasing 128 Kibyte @ 41c0000 -- 60 % complete
      
1400. Erasing 128 Kibyte @ 41e0000 -- 60 % complete
      
1401. Erasing 128 Kibyte @ 4200000 -- 61 % complete
      
1402. Erasing 128 Kibyte @ 4220000 -- 61 % complete
      
1403. Erasing 128 Kibyte @ 4240000 -- 61 % complete
      
1404. Erasing 128 Kibyte @ 4260000 -- 61 % complete
      
1405. Erasing 128 Kibyte @ 4280000 -- 61 % complete
      
1406. Erasing 128 Kibyte @ 42a0000 -- 61 % complete
      
1407. Erasing 128 Kibyte @ 42c0000 -- 61 % complete
      
1408. Erasing 128 Kibyte @ 42e0000 -- 61 % complete
      
1409. Erasing 128 Kibyte @ 4300000 -- 62 % complete
      
1410. Erasing 128 Kibyte @ 4320000 -- 62 % complete
      
1411. Erasing 128 Kibyte @ 4340000 -- 62 % complete
      
1412. Erasing 128 Kibyte @ 4360000 -- 62 % complete
      
1413. Erasing 128 Kibyte @ 4380000 -- 62 % complete
      
1414. Erasing 128 Kibyte @ 43a0000 -- 62 % complete
      
1415. Erasing 128 Kibyte @ 43c0000 -- 62 % complete
      
1416. Erasing 128 Kibyte @ 43e0000 -- 62 % complete
      
1417. Erasing 128 Kibyte @ 4400000 -- 62 % complete
      
1418. Erasing 128 Kibyte @ 4420000 -- 63 % complete
      
1419. Erasing 128 Kibyte @ 4440000 -- 63 % complete
      
1420. Erasing 128 Kibyte @ 4460000 -- 63 % complete
      
1421. Erasing 128 Kibyte @ 4480000 -- 63 % complete
      
1422. Erasing 128 Kibyte @ 44a0000 -- 63 % complete
      
1423. Erasing 128 Kibyte @ 44c0000 -- 63 % complete
      
1424. Erasing 128 Kibyte @ 44e0000 -- 63 % complete
      
1425. Erasing 128 Kibyte @ 4500000 -- 63 % complete
      
1426. Erasing 128 Kibyte @ 4520000 -- 64 % complete
      
1427. Erasing 128 Kibyte @ 4540000 -- 64 % complete
      
1428. Erasing 128 Kibyte @ 4560000 -- 64 % complete
      
1429. Erasing 128 Kibyte @ 4580000 -- 64 % complete
      
1430. Erasing 128 Kibyte @ 45a0000 -- 64 % complete
      
1431. Erasing 128 Kibyte @ 45c0000 -- 64 % complete
      
1432. Erasing 128 Kibyte @ 45e0000 -- 64 % complete
      
1433. Erasing 128 Kibyte @ 4600000 -- 64 % complete
      
1434. Erasing 128 Kibyte @ 4620000 -- 64 % complete
      
1435. Erasing 128 Kibyte @ 4640000 -- 65 % complete
      
1436. Erasing 128 Kibyte @ 4660000 -- 65 % complete
      
1437. Erasing 128 Kibyte @ 4680000 -- 65 % complete
      
1438. Erasing 128 Kibyte @ 46a0000 -- 65 % complete
      
1439. Erasing 128 Kibyte @ 46c0000 -- 65 % complete
      
1440. Erasing 128 Kibyte @ 46e0000 -- 65 % complete
      
1441. Erasing 128 Kibyte @ 4700000 -- 65 % complete
      
1442. Erasing 128 Kibyte @ 4720000 -- 65 % complete
      
1443. Erasing 128 Kibyte @ 4740000 -- 65 % complete
      
1444. Erasing 128 Kibyte @ 4760000 -- 66 % complete
      
1445. Erasing 128 Kibyte @ 4780000 -- 66 % complete
      
1446. Erasing 128 Kibyte @ 47a0000 -- 66 % complete
      
1447. Erasing 128 Kibyte @ 47c0000 -- 66 % complete
      
1448. Erasing 128 Kibyte @ 47e0000 -- 66 % complete
      
1449. Erasing 128 Kibyte @ 4800000 -- 66 % complete
      
1450. Erasing 128 Kibyte @ 4820000 -- 66 % complete
      
1451. Erasing 128 Kibyte @ 4840000 -- 66 % complete
      
1452. Erasing 128 Kibyte @ 4860000 -- 67 % complete
      
1453. Erasing 128 Kibyte @ 4880000 -- 67 % complete
      
1454. Erasing 128 Kibyte @ 48a0000 -- 67 % complete
      
1455. Erasing 128 Kibyte @ 48c0000 -- 67 % complete
      
1456. Erasing 128 Kibyte @ 48e0000 -- 67 % complete
      
1457. Erasing 128 Kibyte @ 4900000 -- 67 % complete
      
1458. Erasing 128 Kibyte @ 4920000 -- 67 % complete
      
1459. Erasing 128 Kibyte @ 4940000 -- 67 % complete
      
1460. Erasing 128 Kibyte @ 4960000 -- 67 % complete
      
1461. Erasing 128 Kibyte @ 4980000 -- 68 % complete
      
1462. Erasing 128 Kibyte @ 49a0000 -- 68 % complete
      
1463. Erasing 128 Kibyte @ 49c0000 -- 68 % complete
      
1464. Erasing 128 Kibyte @ 49e0000 -- 68 % complete
      
1465. Erasing 128 Kibyte @ 4a00000 -- 68 % complete
      
1466. Erasing 128 Kibyte @ 4a20000 -- 68 % complete
      
1467. Erasing 128 Kibyte @ 4a40000 -- 68 % complete
      
1468. Erasing 128 Kibyte @ 4a60000 -- 68 % complete
      
1469. Erasing 128 Kibyte @ 4a80000 -- 68 % complete
      
1470. Erasing 128 Kibyte @ 4aa0000 -- 69 % complete
      
1471. Erasing 128 Kibyte @ 4ac0000 -- 69 % complete
      
1472. Erasing 128 Kibyte @ 4ae0000 -- 69 % complete
      
1473. Erasing 128 Kibyte @ 4b00000 -- 69 % complete
      
1474. Erasing 128 Kibyte @ 4b20000 -- 69 % complete
      
1475. Erasing 128 Kibyte @ 4b40000 -- 69 % complete
      
1476. Erasing 128 Kibyte @ 4b60000 -- 69 % complete
      
1477. Erasing 128 Kibyte @ 4b80000 -- 69 % complete
      
1478. Erasing 128 Kibyte @ 4ba0000 -- 70 % complete
      
1479. Erasing 128 Kibyte @ 4bc0000 -- 70 % complete
      
1480. Erasing 128 Kibyte @ 4be0000 -- 70 % complete
      
1481. Erasing 128 Kibyte @ 4c00000 -- 70 % complete
      
1482. Erasing 128 Kibyte @ 4c20000 -- 70 % complete
      
1483. Erasing 128 Kibyte @ 4c40000 -- 70 % complete
      
1484. Erasing 128 Kibyte @ 4c60000 -- 70 % complete
      
1485. Erasing 128 Kibyte @ 4c80000 -- 70 % complete
      
1486. Erasing 128 Kibyte @ 4ca0000 -- 70 % complete
      
1487. Erasing 128 Kibyte @ 4cc0000 -- 71 % complete
      
1488. Erasing 128 Kibyte @ 4ce0000 -- 71 % complete
      
1489. Erasing 128 Kibyte @ 4d00000 -- 71 % complete
      
1490. Erasing 128 Kibyte @ 4d20000 -- 71 % complete
      
1491. Erasing 128 Kibyte @ 4d40000 -- 71 % complete
      
1492. Erasing 128 Kibyte @ 4d60000 -- 71 % complete
      
1493. Erasing 128 Kibyte @ 4d80000 -- 71 % complete
      
1494. Erasing 128 Kibyte @ 4da0000 -- 71 % complete
      
1495. Erasing 128 Kibyte @ 4dc0000 -- 71 % complete
      
1496. Erasing 128 Kibyte @ 4de0000 -- 72 % complete
      
1497. Erasing 128 Kibyte @ 4e00000 -- 72 % complete
      
1498. Erasing 128 Kibyte @ 4e20000 -- 72 % complete
      
1499. Erasing 128 Kibyte @ 4e40000 -- 72 % complete
      
1500. Erasing 128 Kibyte @ 4e60000 -- 72 % complete
      
1501. Erasing 128 Kibyte @ 4e80000 -- 72 % complete
      
1502. Erasing 128 Kibyte @ 4ea0000 -- 72 % complete
      
1503. Erasing 128 Kibyte @ 4ec0000 -- 72 % complete
      
1504. Erasing 128 Kibyte @ 4ee0000 -- 73 % complete
      
1505. Erasing 128 Kibyte @ 4f00000 -- 73 % complete
      
1506. Erasing 128 Kibyte @ 4f20000 -- 73 % complete
      
1507. Erasing 128 Kibyte @ 4f40000 -- 73 % complete
      
1508. Erasing 128 Kibyte @ 4f60000 -- 73 % complete
      
1509. Erasing 128 Kibyte @ 4f80000 -- 73 % complete
      
1510. Erasing 128 Kibyte @ 4fa0000 -- 73 % complete
      
1511. Erasing 128 Kibyte @ 4fc0000 -- 73 % complete
      
1512. Erasing 128 Kibyte @ 4fe0000 -- 73 % complete
      
1513. Erasing 128 Kibyte @ 5000000 -- 74 % complete
      
1514. Erasing 128 Kibyte @ 5020000 -- 74 % complete
      
1515. Erasing 128 Kibyte @ 5040000 -- 74 % complete
      
1516. Erasing 128 Kibyte @ 5060000 -- 74 % complete
      
1517. Erasing 128 Kibyte @ 5080000 -- 74 % complete
      
1518. Erasing 128 Kibyte @ 50a0000 -- 74 % complete
      
1519. Erasing 128 Kibyte @ 50c0000 -- 74 % complete
      
1520. Erasing 128 Kibyte @ 50e0000 -- 74 % complete
      
1521. Erasing 128 Kibyte @ 5100000 -- 75 % complete
      
1522. Erasing 128 Kibyte @ 5120000 -- 75 % complete
      
1523. Erasing 128 Kibyte @ 5140000 -- 75 % complete
      
1524. Erasing 128 Kibyte @ 5160000 -- 75 % complete
      
1525. Erasing 128 Kibyte @ 5180000 -- 75 % complete
      
1526. Erasing 128 Kibyte @ 51a0000 -- 75 % complete
      
1527. Erasing 128 Kibyte @ 51c0000 -- 75 % complete
      
1528. Erasing 128 Kibyte @ 51e0000 -- 75 % complete
      
1529. Erasing 128 Kibyte @ 5200000 -- 75 % complete
      
1530. Erasing 128 Kibyte @ 5220000 -- 76 % complete
      
1531. Erasing 128 Kibyte @ 5240000 -- 76 % complete
      
1532. Erasing 128 Kibyte @ 5260000 -- 76 % complete
      
1533. Erasing 128 Kibyte @ 5280000 -- 76 % complete
      
1534. Erasing 128 Kibyte @ 52a0000 -- 76 % complete
      
1535. Erasing 128 Kibyte @ 52c0000 -- 76 % complete
      
1536. Erasing 128 Kibyte @ 52e0000 -- 76 % complete
      
1537. Erasing 128 Kibyte @ 5300000 -- 76 % complete
      
1538. Erasing 128 Kibyte @ 5320000 -- 76 % complete
      
1539. Erasing 128 Kibyte @ 5340000 -- 77 % complete
      
1540. Erasing 128 Kibyte @ 5360000 -- 77 % complete
      
1541. Erasing 128 Kibyte @ 5380000 -- 77 % complete
      
1542. Erasing 128 Kibyte @ 53a0000 -- 77 % complete
      
1543. Erasing 128 Kibyte @ 53c0000 -- 77 % complete
      
1544. Erasing 128 Kibyte @ 53e0000 -- 77 % complete
      
1545. Erasing 128 Kibyte @ 5400000 -- 77 % complete
      
1546. Erasing 128 Kibyte @ 5420000 -- 77 % complete
      
1547. Erasing 128 Kibyte @ 5440000 -- 78 % complete
      
1548. Erasing 128 Kibyte @ 5460000 -- 78 % complete
      
1549. Erasing 128 Kibyte @ 5480000 -- 78 % complete
      
1550. Erasing 128 Kibyte @ 54a0000 -- 78 % complete
      
1551. Erasing 128 Kibyte @ 54c0000 -- 78 % complete
      
1552. Erasing 128 Kibyte @ 54e0000 -- 78 % complete
      
1553. Erasing 128 Kibyte @ 5500000 -- 78 % complete
      
1554. Erasing 128 Kibyte @ 5520000 -- 78 % complete
      
1555. Erasing 128 Kibyte @ 5540000 -- 78 % complete
      
1556. Erasing 128 Kibyte @ 5560000 -- 79 % complete
      
1557. Erasing 128 Kibyte @ 5580000 -- 79 % complete
      
1558. Erasing 128 Kibyte @ 55a0000 -- 79 % complete
      
1559. Erasing 128 Kibyte @ 55c0000 -- 79 % complete
      
1560. Erasing 128 Kibyte @ 55e0000 -- 79 % complete
      
1561. Erasing 128 Kibyte @ 5600000 -- 79 % complete
      
1562. Erasing 128 Kibyte @ 5620000 -- 79 % complete
      
1563. Erasing 128 Kibyte @ 5640000 -- 79 % complete
      
1564. Erasing 128 Kibyte @ 5660000 -- 79 % complete
      
1565. Erasing 128 Kibyte @ 5680000 -- 80 % complete
      
1566. Erasing 128 Kibyte @ 56a0000 -- 80 % complete
      
1567. Erasing 128 Kibyte @ 56c0000 -- 80 % complete
      
1568. Erasing 128 Kibyte @ 56e0000 -- 80 % complete
      
1569. Erasing 128 Kibyte @ 5700000 -- 80 % complete
      
1570. Erasing 128 Kibyte @ 5720000 -- 80 % complete
      
1571. Erasing 128 Kibyte @ 5740000 -- 80 % complete
      
1572. Erasing 128 Kibyte @ 5760000 -- 80 % complete
      
1573. Erasing 128 Kibyte @ 5780000 -- 81 % complete
      
1574. Erasing 128 Kibyte @ 57a0000 -- 81 % complete
      
1575. Erasing 128 Kibyte @ 57c0000 -- 81 % complete
      
1576. Erasing 128 Kibyte @ 57e0000 -- 81 % complete
      
1577. Erasing 128 Kibyte @ 5800000 -- 81 % complete
      
1578. Erasing 128 Kibyte @ 5820000 -- 81 % complete
      
1579. Erasing 128 Kibyte @ 5840000 -- 81 % complete
      
1580. Erasing 128 Kibyte @ 5860000 -- 81 % complete
      
1581. Erasing 128 Kibyte @ 5880000 -- 81 % complete
      
1582. Erasing 128 Kibyte @ 58a0000 -- 82 % complete
      
1583. Erasing 128 Kibyte @ 58c0000 -- 82 % complete
      
1584. Erasing 128 Kibyte @ 58e0000 -- 82 % complete
      
1585. Erasing 128 Kibyte @ 5900000 -- 82 % complete
      
1586. Erasing 128 Kibyte @ 5920000 -- 82 % complete
      
1587. Erasing 128 Kibyte @ 5940000 -- 82 % complete
      
1588. Erasing 128 Kibyte @ 5960000 -- 82 % complete
      
1589. Erasing 128 Kibyte @ 5980000 -- 82 % complete
      
1590. Erasing 128 Kibyte @ 59a0000 -- 82 % complete
      
1591. Erasing 128 Kibyte @ 59c0000 -- 83 % complete
      
1592. Erasing 128 Kibyte @ 59e0000 -- 83 % complete
      
1593. Erasing 128 Kibyte @ 5a00000 -- 83 % complete
      
1594. Erasing 128 Kibyte @ 5a20000 -- 83 % complete
      
1595. Erasing 128 Kibyte @ 5a40000 -- 83 % complete
      
1596. Erasing 128 Kibyte @ 5a60000 -- 83 % complete
      
1597. Erasing 128 Kibyte @ 5a80000 -- 83 % complete
      
1598. Erasing 128 Kibyte @ 5aa0000 -- 83 % complete
      
1599. Erasing 128 Kibyte @ 5ac0000 -- 84 % complete
      
1600. Erasing 128 Kibyte @ 5ae0000 -- 84 % complete
      
1601. Erasing 128 Kibyte @ 5b00000 -- 84 % complete
      
1602. Erasing 128 Kibyte @ 5b20000 -- 84 % complete
      
1603. Erasing 128 Kibyte @ 5b40000 -- 84 % complete
      
1604. Erasing 128 Kibyte @ 5b60000 -- 84 % complete
      
1605. Erasing 128 Kibyte @ 5b80000 -- 84 % complete
      
1606. Erasing 128 Kibyte @ 5ba0000 -- 84 % complete
      
1607. Erasing 128 Kibyte @ 5bc0000 -- 84 % complete
      
1608. Erasing 128 Kibyte @ 5be0000 -- 85 % complete
      
1609. Erasing 128 Kibyte @ 5c00000 -- 85 % complete
      
1610. Erasing 128 Kibyte @ 5c20000 -- 85 % complete
      
1611. Erasing 128 Kibyte @ 5c40000 -- 85 % complete
      
1612. Erasing 128 Kibyte @ 5c60000 -- 85 % complete
      
1613. Erasing 128 Kibyte @ 5c80000 -- 85 % complete
      
1614. Erasing 128 Kibyte @ 5ca0000 -- 85 % complete
      
1615. Erasing 128 Kibyte @ 5cc0000 -- 85 % complete
      
1616. Erasing 128 Kibyte @ 5ce0000 -- 85 % complete
      
1617. Erasing 128 Kibyte @ 5d00000 -- 86 % complete
      
1618. Erasing 128 Kibyte @ 5d20000 -- 86 % complete
      
1619. Erasing 128 Kibyte @ 5d40000 -- 86 % complete
      
1620. Erasing 128 Kibyte @ 5d60000 -- 86 % complete
      
1621. Erasing 128 Kibyte @ 5d80000 -- 86 % complete
      
1622. Erasing 128 Kibyte @ 5da0000 -- 86 % complete
      
1623. Erasing 128 Kibyte @ 5dc0000 -- 86 % complete
      
1624. Erasing 128 Kibyte @ 5de0000 -- 86 % complete
      
1625. Erasing 128 Kibyte @ 5e00000 -- 87 % complete
      
1626. Erasing 128 Kibyte @ 5e20000 -- 87 % complete
      
1627. Erasing 128 Kibyte @ 5e40000 -- 87 % complete
      
1628. Erasing 128 Kibyte @ 5e60000 -- 87 % complete
      
1629. Erasing 128 Kibyte @ 5e80000 -- 87 % complete
      
1630. Erasing 128 Kibyte @ 5ea0000 -- 87 % complete
      
1631. Erasing 128 Kibyte @ 5ec0000 -- 87 % complete
      
1632. Erasing 128 Kibyte @ 5ee0000 -- 87 % complete
      
1633. Erasing 128 Kibyte @ 5f00000 -- 87 % complete
      
1634. Erasing 128 Kibyte @ 5f20000 -- 88 % complete
      
1635. Erasing 128 Kibyte @ 5f40000 -- 88 % complete
      
1636. Erasing 128 Kibyte @ 5f60000 -- 88 % complete
      
1637. Erasing 128 Kibyte @ 5f80000 -- 88 % complete
      
1638. Erasing 128 Kibyte @ 5fa0000 -- 88 % complete
      
1639. Erasing 128 Kibyte @ 5fc0000 -- 88 % complete
      
1640. Erasing 128 Kibyte @ 5fe0000 -- 88 % complete
      
1641. Erasing 128 Kibyte @ 6000000 -- 88 % complete
      
1642. Erasing 128 Kibyte @ 6020000 -- 89 % complete
      
1643. Erasing 128 Kibyte @ 6040000 -- 89 % complete
      
1644. Erasing 128 Kibyte @ 6060000 -- 89 % complete
      
1645. Erasing 128 Kibyte @ 6080000 -- 89 % complete
      
1646. Erasing 128 Kibyte @ 60a0000 -- 89 % complete
      
1647. Erasing 128 Kibyte @ 60c0000 -- 89 % complete
      
1648. Erasing 128 Kibyte @ 60e0000 -- 89 % complete
      
1649. Erasing 128 Kibyte @ 6100000 -- 89 % complete
      
1650. Erasing 128 Kibyte @ 6120000 -- 89 % complete
      
1651. Erasing 128 Kibyte @ 6140000 -- 90 % complete
      
1652. Erasing 128 Kibyte @ 6160000 -- 90 % complete
      
1653. Erasing 128 Kibyte @ 6180000 -- 90 % complete
      
1654. Erasing 128 Kibyte @ 61a0000 -- 90 % complete
      
1655. Erasing 128 Kibyte @ 61c0000 -- 90 % complete
      
1656. Erasing 128 Kibyte @ 61e0000 -- 90 % complete
      
1657. Erasing 128 Kibyte @ 6200000 -- 90 % complete
      
1658. Erasing 128 Kibyte @ 6220000 -- 90 % complete
      
1659. Erasing 128 Kibyte @ 6240000 -- 90 % complete
      
1660. Erasing 128 Kibyte @ 6260000 -- 91 % complete
      
1661. Erasing 128 Kibyte @ 6280000 -- 91 % complete
      
1662. Erasing 128 Kibyte @ 62a0000 -- 91 % complete
      
1663. Erasing 128 Kibyte @ 62c0000 -- 91 % complete
      
1664. Erasing 128 Kibyte @ 62e0000 -- 91 % complete
      
1665. Erasing 128 Kibyte @ 6300000 -- 91 % complete
      
1666. Erasing 128 Kibyte @ 6320000 -- 91 % complete
      
1667. Erasing 128 Kibyte @ 6340000 -- 91 % complete
      
1668. Erasing 128 Kibyte @ 6360000 -- 92 % complete
      
1669. Erasing 128 Kibyte @ 6380000 -- 92 % complete
      
1670. Erasing 128 Kibyte @ 63a0000 -- 92 % complete
      
1671. Erasing 128 Kibyte @ 63c0000 -- 92 % complete
      
1672. Erasing 128 Kibyte @ 63e0000 -- 92 % complete
      
1673. Erasing 128 Kibyte @ 6400000 -- 92 % complete
      
1674. Erasing 128 Kibyte @ 6420000 -- 92 % complete
      
1675. Erasing 128 Kibyte @ 6440000 -- 92 % complete
      
1676. Erasing 128 Kibyte @ 6460000 -- 92 % complete
      
1677. Erasing 128 Kibyte @ 6480000 -- 93 % complete
      
1678. Erasing 128 Kibyte @ 64a0000 -- 93 % complete
      
1679. Erasing 128 Kibyte @ 64c0000 -- 93 % complete
      
1680. Erasing 128 Kibyte @ 64e0000 -- 93 % complete
      
1681. Erasing 128 Kibyte @ 6500[   12.560000] UBI error: ubi_attach_mtd_dev: mtd8 is already attached to ubi0
      
1682. 000 -- 93 % complete
      
1683. Erasing 128 Kibyte @ 6520000 -- 93 % complete
      
1684. Erasing 128 Kibyte @ 6540000 -- 93 % complete
      
1685. Erasing 128 Kibyte @ 6560000 -- 93 % comp[   12.580000] SQUASHFS error: xz_dec_run error, data probably corrupt
      
1686. [   12.580000] SQUASHFS error: squashfs_read_data failed to read block 0x15ea8fc
      
1687. [   12.590000] SQUASHFS error: Unable to read fragment cache entry [15ea8fc]
      
1688. [   12.600000] SQUASHFS error: Unable to read page, block 15ea8fc, size 4f50
      
1689. [   12.600000] SQUASHFS error: Unable to read fragment cache entry [15ea8fc]
      
1690. [   12.610000] SQUASHFS error: Unable to read page, block 15ea8fc, size 4f50
      
1691. [   12.620000] SQUASHFS error: Unable to read fragment cache entry [15ea8fc]
      
1692. [   12.620000] SQUASHFS error: Unable to read page, block 15ea8fc, size 4f50
      
1693. [   12.630000] SQUASHFS error: Unable to read fragment cache entry [15ea8fc]
      
1694. [   12.640000] SQUASHFS error: Unable to read page, block 15ea8fc, size 4f50
      
1695. [   12.650000] SQUASHFS error: Unable to read fragment cache entry [15ea8fc]
      
1696. [   12.650000] SQUASHFS error: Unable to read page, block 15ea8fc, size 4f50
      
1697. lete
      
1698. Erasing 128 Kibyte @ 6580000 -- 93 % complete
      
1699. Erasing 128 Kibyte @ 65a0000 -- 94 % complete
      
1700. Erasing 128 Kibyte @ 65c0000 -- 94 % complete
      
1701. Erasing 128 Kibyte @ 65e0000 -- 94 % complete
      
1702. Erasing 128 Kibyte @ 6600000 -- 94 % complete
      
1703. Erasing 128 Kibyte @ 6620000 -- 94 % complete
      
1704. Erasing 128 Kibyte @ 6640000 -- 94 % complete
      
1705. Erasing 128 K[   12.690000] SQUASHFS error: xz_dec_run error, data probably corrupt
      
1706. [   12.700000] SQUASHFS error: squashfs_read_data failed to read block 0x720f7e
      
1707. [   12.700000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1708. [   12.710000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1709. [   12.720000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1710. [   12.720000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1711. [   12.730000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1712. [   12.730000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1713. [   12.740000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1714. [   12.750000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1715. [   12.750000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1716. [   12.760000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1717. [   12.770000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1718. [   12.770000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1719. [   12.780000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1720. [   12.790000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1721. [   12.790000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1722. [   12.800000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1723. [   12.810000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1724. [   12.810000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1725. [   12.820000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1726. [   12.830000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1727. [   12.830000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1728. [   12.840000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1729. [   12.850000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1730. [   12.850000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1731. [   12.860000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1732. [   12.860000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1733. [   12.870000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1734. [   12.880000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1735. [   12.880000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1736. [   12.890000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1737. [   12.900000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1738. [   12.900000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1739. [   12.910000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1740. [   12.920000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1741. [   12.920000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1742. [   12.930000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1743. [   12.940000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1744. [   12.940000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1745. [   12.950000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1746. [   12.960000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1747. [   12.960000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1748. [   12.970000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1749. [   12.980000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1750. [   12.980000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1751. [   12.990000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1752. [   12.990000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1753. [   13.000000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1754. [   13.010000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1755. [   13.010000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1756. [   13.020000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1757. [   13.030000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1758. [   13.030000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1759. [   13.040000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1760. [   13.050000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1761. [   13.050000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1762. [   13.060000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1763. [   13.070000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1764. [   13.070000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1765. [   13.080000] SQUASHFS error: Unable to read data cache entry [720f7e]
      
1766. [   13.090000] SQUASHFS error: Unable to read page, block 720f7e, size 8628
      
1767. 
      
1768. ROM VER: 2.1.0
      
1769. CFG 0a
      
1770. B

复制代码

php.c

你好，可以编译一下这个项目吗
https://github.com/mchome/dogcom    和   https://github.com/mchome/openwrt-dogcom

zhengxinhn

单独发软件的二进制文件啊，运行下试试就知道了。
为什么会砖。。。

wlbb2005

SDK发来研究下吧

paldier

zhengxinhn 发表于 2017-8-19 23:04
单独发软件的二进制文件啊，运行下试试就知道了。
为什么会砖。。。

这路由智障设置个ip就挂了最后只能捅菊花，谁知道会出现什么问题，反正砖了别找我，提前说好

shency

高手，我等小白只能围观

zhengxinhn

zhengxinhn 发表于 2017-8-19 23:04
单独发软件的二进制文件啊，运行下试试就知道了。
为什么会砖。。。

只要不刷机，就把二进制丢到 /tmp 运行,这要是都能砖。。。
能说下 SDK 从哪弄的么？

paldier

zhengxinhn 发表于 2017-8-19 23:26
只要不刷机，就把二进制丢到 /tmp 运行,这要是都能砖。。。
能说下 SDK 从哪弄的么？

仔细扒下固件就知道从哪弄了

paldier

zhengxinhn 发表于 2017-8-19 23:26
只要不刷机，就把二进制丢到 /tmp 运行,这要是都能砖。。。
能说下 SDK 从哪弄的么？

你还别说，k3c是我看见的第一个出厂后不捅菊花就不能启动的路由，差点就以为是坏的退货了，无意间看见他们说要捅菊花

bear110

编个aria2试试？

php.c

php.c 发表于 2017-8-19 23:04
你好，可以编译一下这个项目吗
https://github.com/mchome/dogcom    和   https://github.com/mchome/ope ...

楼主不用了，我已经编译好了

paldier

php.c 发表于 2017-8-20 01:01
楼主不用了，我已经编译好了

呃...........我这350才跑了60%，我觉得这代码很完整至今一个错都没报，我有点怀疑纠结是谁“不小心”放出来的

ZHIZAI100

关注中

lixingex2000

k3c的cpu到底是软锁的还是阉割版啊

shutup

只是软件的话xrx200的就可以了