|
/bin/ash: syntax error: unexpected "("
root@TP-Link:/# [ 0.540000] TCP bind hash table entries: 2048 (order: 1, 8192
bytes)
[ /bin/ash: syntax error: unexpected "("
0.root@TP-Link:/# [ 0.544000] TCP: Hash tables configured (established 2048 bin
d 2048)
/bin/ash: syntax error: unexpected "("
root@TP-Link:/# [ 0.552000] TCP reno registered
ash: missing ]
root@TP-Link:/# [ 0.556000] UDP hash table entries: 256 (order: 0, 4096 bytes
)
/bin/ash: syntax error: unexpected "("
root@TP-Link:/# [ 0.560000] UDP-Lite hash table entries: 256 (order: 0, 4096
bytes)
/bin/ash: syntax error: unexpected "("
root@TP-Link:/# [ 0.568000] NET: Registered protocol family 1
ash: missing ]
root@TP-Link:/# [ 0.596000] squashfs: version 4.0 (2009/01/31) Phillip Loughe
r
/bin/ash: syntax error: unexpected "("
root@TP-Link:/# [ 0.600000] NTFS driver 2.1.30 [Flags: R/W].
ash: missing ]
root@TP-Link:/# [ 0.604000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
(CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ /bin/ash : syntax error: unexpected "("
0root@TP-Link:/# [ 0.616000] fuse init (API version 7.18)
[ /bin/ash: syntax error: unexpected "("
0root@TP-Link:/# [ 0.620000] msgmni has been set to 118
ash: missing ]
root@TP-Link:/# [ 0.624000] io scheduler noop registered
ash: missing ]
root@TP-Link:/# [ 0.624000] io scheduler cfq registered (default)
/bin/ash: syntax error: unexpected "("
root@TP-Link:/# [ 0.632000] Serial: 8250/16550 driver, 1 ports, IRQ sharing d
isabled
ash: missing ]
root@TP-Link:/# [ 0.636000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11
) is a AR933X UART
/bin/ash: syntax error: unexpected "("
root@TP-Link:/# [ 0.644000] console [ttyATH0] enabled, bootconsole disabled
ash: missing ]
root@TP-Link:/# [ 0.644000] console [ttyATH0] enabled, bootconsole disabled
ash: missing ]
root@TP-Link:/# [ 0.660000] m25p80 spi0.0: found s25fl064k, expected m25p80
ash: missing ]
root@TP-Link:/# [ 0.664000] m25p80 spi0.0: s25fl064k (8192 Kbytes)
/bin/ash: 0syntax error: unexpected "("
.6root@TP-Link:/# [ 0.668000] 5 tp-link partitions found on MTD device spi0.0
ash: missing ]
root@TP-Link:/# [ 0.672000] Creating 5 MTD partitions on "spi0.0":
ash: missing ]
root@TP-Link:/# [ 0.676000] 0x000000000000-0x000000020000 : "u-boot"
ash: missing ]
root@TP-Link:/# [ 0.684000] 0x000000020000-0x00000014e084 : "kernel"
ash: missing ]
root@TP-Link:/# [ 0.688000] mtd: partition "kernel" must either start or end
on erase block boundary or be smaller than an erase block -- forcing read-only
04000] ash: missing ]
0x0root@TP-Link:/# [ 0.704000] 0x00000014e084-0x0000007f0000 : "rootfs"
ash: missing ]
root@TP-Link:/# [ 0.708000] mtd: partition "rootfs" must either start or end
on erase block boundary or be smaller than an erase block -- forcing read-only
0.7ash: missing ]
20root@TP-Link:/# [ 0.720000] mtd: partition "rootfs" set to be root filesystem
[ ash: missing ]
0.root@TP-Link:/# [ 0.724000] mtd: partition "rootfs_data" created automaticall
y, ofs=740000, len=B0000
[ 0ash: missing ]
.7root@TP-Link:/# [ 0.732000] 0x000000740000-0x0000007f0000 : "rootfs_data"
ash: missing ]
root@TP-Link:/# [ 0.740000] 0x0000007f0000-0x000000800000 : "art"
ash: missing ]
root@TP-Link:/# [ 0.744000] 0x000000020000-0x0000007f0000 : "firmware"
ash: missing ]
root@TP-Link:/# [ 0.772000] ag71xx_mdio: probed
ash: missing ]
root@TP-Link:/# [ 0.772000] eth0: Atheros AG71xx at 0xba000000, irq 5
ash: missing ]
root@TP-Link:/# [ 1.328000] eth0: Found an AR7240/AR9330 built-in switch
ash: missing ]
root@TP-Link:/# [ 2.344000] eth1: Atheros AG71xx at 0xb9000000, irq 4
ash: missing ]
root@TP-Link:/# [ 2.900000] ag71xx ag71xx.0: eth1: connected to PHY at ag71xx
-mdio.1:04 [uid=004dd041, driver=Generic PHY]
ash: missing ]
[ 2.90root@TP-Link:/# [ 2.908000] TCP cubic registered
ash: missing ]
root@TP-Link:/# [ 2.912000] NET: Registered protocol family 17
ash: missing ]
root@TP-Link:/# [ 2.916000] 8021q: 802.1Q VLAN Support v1.8
[ ash: missing ]
2.root@TP-Link:/# [ 2.928000] VFS: Mounted root (squashfs filesystem) readonly
on device 31:2.
/bin/ash: syntax error: unexpected "("
root@TP-Link:/# [ 2.936000] Freeing unused kernel memory: 216k freed
ash: missing ]
root@TP-Link:/# - preinit -
/bin/ash: -: not found
root@TP-Link:/# Press the [f] key and hit [enter] to enter failsafe mode
/bin/ash: Press: not found
root@TP-Link:/# - regular preinit -
/bin/ash: -: not found
root@TP-Link:/# [ 9.928000] JFFS2 notice: (451) jffs2_build_xattr_subsystem:
complete building xattr subsystem, 41 of xdatum (1 unchecked, 40 orphan) and 87
of xref (0 dead, 54 orphan) found.
/bin/ash: syntax error: unexpected "("
root@TP-Link:/# [ 10.544000] SCSI subsystem initialized
ash: missing ]
root@TP-Link:/# [ 10.712000] usbcore: registered new interface driver usbfs
usbcoash: missing ]
re:root@TP-Link:/# [ 10.716000] usbcore: registered new interface driver hub
ash: missing ]
root@TP-Link:/# [ 10.724000] usbcore: registered new device driver usb
ash: missing ]
root@TP-Link:/# [ 10.752000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHC
I) Driver
/bin/ash: syntax error: unexpected "("
root@TP-Link:/# [ 10.756000] ehci-platform ehci-platform: Generic Platform EHC
I Controller
ash: missing ]
root@TP-Link:/# [ 10.764000] ehci-platform ehci-platform: new USB bus register
ed, assigned bus number 1
ash: missing ]
root@TP-Link:/# [ 10.796000] ehci-platform ehci-platform: irq 3, io mem 0x1b00
0000
ash: missing ]
root@TP-Link:/# [ 10.812000] ehci-platform ehci-platform: USB 2.0 started, EHC
I 1.00
ash: missing ]
root@TP-Link:/# [ 10.816000] hub 1-0:1.0: USB hub found
ash: missing ]
root@TP-Link:/# [ 10.820000] hub 1-0:1.0: 1 port detected
ash: missing ]
root@TP-Link:/# [ 10.944000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) D
river
/bin/ash: syntax error: unexpected "("
root@TP-Link:/# [ 10.960000] uhci_hcd: USB Universal Host Controller Interface
driver
ash: missing ]
root@TP-Link:/# [ 10.984000] Initializing USB Mass Storage driver...
ash: missing ]
root@TP-Link:/# [ 10.988000] usbcore: registered new interface driver usb-stor
age
[ 10ash: missing ]
.9root@TP-Link:/# [ 10.992000] USB Mass Storage support registered.
ash: missing ]
root@TP-Link:/# [ 11.156000] usb 1-1: new high-speed USB device number 2 using
ehci-platform
ash: missing ]
root@TP-Link:/# [ 11.296000] scsi0 : usb-storage 1-1:1.0
ash: missing ]
root@TP-Link:/# [ 12.296000] scsi 0:0:0:0: Direct-Access HyunDai HyunDai
1820 PQ: 0 ANSI: 0 CCS
[ 12ash: missing ]
.30root@TP-Link:/# [ 12.308000] sd 0:0:0:0: [sda] 7831552 512-byte logical blocks
: (4.00 GB/3.73 GiB)
[ /bin/ash : syntax error: unexpected "("
12root@TP-Link:/# [ 12.316000] sd 0:0:0:0: [sda] Write Protect is off
ash: missing ]
root@TP-Link:/# [ 12.320000] sd 0:0:0:0: [sda] No Caching mode page present
ash: missing ]
root@TP-Link:/# [ 12.324000] sd 0:0:0:0: [sda] Assuming drive cache: write thr
ough
ash: missing ]
root@TP-Link:/# [ 12.336000] sd 0:0:0:0: [sda] No Caching mode page present
ash: missing ]
root@TP-Link:/# [ 12.340000] sd 0:0:0:0: [sda] Assuming drive cache: write thr
ough
[ 12.3440ash: missing ]
00]root@TP-Link:/# [ 12.344000] sda: sda1
ash: missing ]
root@TP-Link:/# [ 12.352000] sd 0:0:0:0: [sda] No Caching mode page present
ash: missing ]
root@TP-Link:/# [ 12.356000] sd 0:0:0:0: [sda] Assuming drive cache: write thr
ough
ash: missing ]
root@TP-Link:/# [ 12.360000] sd 0:0:0:0: [sda] Attached SCSI removable disk
ash: missing ]
root@TP-Link:/# mount: mounting /dev/sda1 on /overlay failed: Invalid argument
/bin/ash: mount:: not found
root@TP-Link:/# switching to jffs2
/bin/ash: switching: not found
root@TP-Link:/# - init -
/bin/ash: -: not found
root@TP-Link:/#
root@TP-Link:/# Please press Enter to activate this console. [ 29.732000] Comp
at-drivers backport release: compat-drivers-2012-09-04-2-gddac993
29.74000/bin/ash0: ]Please: not found
Baroot@TP-Link:/# [ 29.740000] Backport based on wireless-testing.git master-201
2-09-07
ash: missing ]
root@TP-Link:/# [ 29.744000] compat.git: wireless-testing.git
ash: missing ]
root@TP-Link:/# [ 29.792000] cfg80211: Calling CRDA to update world regulatory
domain
|
|